Reinstalling XP Pro

Similar Questions

• Reinstall XP Pro on nc8230

  I just reinstalled XP Pro on a nc8230.  Everything works, but in Device Manager, I got some yellow markings for Mass Storage, network controller and Simple PCI Communications.  I had a lot more but I was able to fix them.  I don't know what drivers to download for these three questions, and I wonder if they are important enough to worry.  I use the laptop to write this message, so things work ok.  Any suggestions would be helpful.

  You are the very welcome.

  This is your WLAN Intel card that needs the drivers installed.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=1839150&prodNameId=1839197&swEnvOID=1093&swLang=8&mode=2&taskId=135&swItem=ob-57882-1

  That should do it.

  Paul

• Problems Windows Update after reinstalling XP Pro.

  I had a hard drive go bad a few days before the April 8 end of XP support.  So, I installed a new drive and reinstalled XP Pro, sp2, then free AVG2014, then Microsoft Download Manager, and then sp3, then IE8.  I turned then automatic updates, but it did not work.  I tried to go to automatic updates directly via the Control Panel, but get the following message is displayed:

  [Error number: 0 x 80245001]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I tried a lot of different things from this web show, but nothing refers to the following [error number: 0 x 80245001]

  Any ideas?

  Thank you.

  Hi Joseph,.

  Apologize for the delay in response. Let us know if the problem has been resolved or do you need help on this question. We will be happy to help you. In the meantime, you can also check out this article that talks about this problem:

  http://support.Microsoft.com/kb/883614

  I hope this helps.

• I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page.

  I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page. I have sp2, what don't get me?

  Please see the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3/a71b55ee-10d4-410C-8b0b-a2114f7d8b94 >>

  UTC/GMT is 07:51 on Wednesday, August 15, 2012

• Windows update error 0x8024400A after reinstalling xp pro

  Hello.. I just reinstalled xp pro for a bigger drive now I can't download sp3, mse or other updates displays error 0 X 8024400 code everytime I try

  an advise please

  I had the same problem, they say it's for communication problems, etc, but my internet connection was very good.  I solved it download SP3 from: http://www.microsoft.com/en-us/download/confirmation.aspx?id=24 I got in trouble 'save' the file so I clicked on 'Run' and updated my windows, then Windows Update worked as usual!

• Update problems, I just reinstalled XP pro and I can't get the updates from the windows update web site

  I just reinstalled XP pro and I can't get the updates from the windows update web site. Whats up with this please help

  There is no way that anyone might be able to help without more. My initial guess and it is just a guess, is that you have to update Internet Explorer .v8. Click HERE and download IE8 and install it. Try again updates once the installation is complete.

• Try to reinstall WinXP Pro, but it won't let me activate.

  OEM OF VISTA HOME PREMIUM, DOWNGRADED to WINXP Pro... Hard drive failure

  try to reinstall WinXP Pro, but don't let me activate.  Everyone I have cn talk?  Don't auto activation wizard no good.

  JUST FOUND.  UGH!  It seems that I need to run a TOOL of CHANGE PK.
  After 2 days of trying to get this active: Suggestion to MS, why not indicate who in your activation tool automatically as one of the ways to be active if you have up/downgraded to orig PK OEM?
  Thanks for you help Tommy ;)
  
  

• Accidentally deleted Windows 98 when trying to reinstall XP Pro upgrade.

  I wanted just a fresh reinstall of XP Pro, so please help me with my specific problem if you can.  I was using my version of XP Pro to re-intall upgrade.  Instructions for reinstalling confused me and I inadvertently selected an option that has removed the original 98 OS during installation process.  Given that my copy of XP Pro, is to install an upgrade not a complete new OS, I can't proceed because my 98 files are gone: (...) (but perhaps not fatal?)  I stopped the process as soon as I realized that the option I chose was probably not the right, but it seems that it was too late.  Using my XP Pro upgrade cd installation could not proceed when I tried again because the original 98 OS files are now missing. :(

  I got this computer set up with a legitimate 98 and XP Pro upgrade for several years.  I can't find my original of 98 (I can't find it in stock and gives me an injury so I can't dig for it, also, it could be anywhere).  So the problem is this: I need to restore my 98 operation system somehow somehow (without my cd), so I can use my XP Pro updated to get back to where I was, a work computer XP Pro.  That's all.

  Is it possible to do, either by MS support (I was registered through Windows Genuine Advantage or just what it's called so I guess they can check that my BONES were and are indeed legitimate) or can they help me with another installation of 98 so I can re - install usimg my upgrade back to XP Pro? Or another solution? Somehow to restore the deleted files? Please note: I can not afford to buy anything right now, I am out of work right now, so thank you very much in advance for any suggestions and the reasons to buy Windows 7 or buy something else, but these solutions are NOT viable for me right now, but thank you again if you were going to think that.  What I really need help's suggestions as to what can be done to help me get my current system facing up and running using what I have on the spot.

  I appreciate sincerely any help you can offer!

  Original title; Oh, crud. 98 deleted when trying to reinstall XP Pro upgrade.

  Hello

  You can try the steps in the following article, if perhaps a backup before installation.

  How to manually restore the Windows 98 / Me Registre

  http://support.Microsoft.com/kb/221512

  You can also check with the manufacturer of their computer, if it is optionally preinstalled on their computer.

  Reference on the support of Windows 98:

  Support for Windows 98

  http://support.Microsoft.com/ph/1139

• How to reinstall XP Pro operating system disk already XP Pro; make a partition, or the multiboot?

  On the old system: I don't remember the admin. password, so I can't get past this to open a session. Is there another way to get around this page or try to reset the password or change the administrator? I tried to reinstall XP Pro disc and while; He said that it can work correctly with 2 operating systems on a partition and proposed to learn more by going on... http://www.microsoft.com/windows/multiboot.asp using internet explore. Now Im really confused. At the beginning I tried to fix it, because I'm not sure if I'm going to crash and lose original system or what. Help, please!

  Hello

  Repair installation does not solve the problem for the recovery of your password. You can also check this link:

  Standard password policies:

  http://support.Microsoft.com/kb/189126

• I reinstalled XP Pro - when I try to install a sound driver, I thought I need admin privelages

  original title: Admin Privelages

  I reinstalled XP Pro - when I try to install a sound driver, I thought I need admin privelages. I'm already logged as administrator. Any ideas anyone?

  You have installed Windows XP from scratch?  Erase all (format) and clean install?

• Reinstalled xp pro. Need to updates

  Had to reinstall xp pro on an old pc.  Used - included recovery disk had xp sp1.  You want to recover up to sp3 but when I try to install sp2, I thought that I must have sp1a.  Microsoft says do not install it if I have 1 1a.  How to get back to sp3?

  First of all, you need not install sp 2 in order to get MS 1 to sp 3.

  The difference between sp1 and sp1a is only the removal of the Virtual Machine Java MS (which Microsoft was forced to do after losing a lawsuit filed by Sun).  So, despite the Microsoft articles that say you need sp1a in order to install sp3, it should should work perfectly for sp1.

  How do you "say you" you need sp1a?  Did you go Windows Update once you have reinstalled using your recovery disk?

  The following text is from an old post of MS MVP Shenan Stanley, but it is still topical advice (you can ignore analyses anti-malware if you just do the recovery and have not yet connected to the computer to the Internet):

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron...tallation.aspx   (if this link does not work, try this one: http://webcache.googleusercontent.com/search?q=cache:n8P_zdluJVEJ:msmvps.com/blogs/harrywaldron/archive/2008/05/08/windows-xp-sp3-read-all-prerequisites-for-a-successful-installation.aspx+harry+waldron+prerequisites&cd=1&hl=en&ct=clnk&gl=us&source= www.google.com)

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  Suggestions:

  (1) download the full installation of SP3 file or burn the ISO download to
  CD.
  (2) ensure (as is likely) you have no spyware/malware doing a full
  Scan with SuperAntiSpyware and MalwareBytes.
  (3) CHKDSK
  (4) defragment
  (5) make sure that your drivers are up to date (from the material
  respective web pages of the manufacturer).
  (6) restart the right before you try to install SP3.
  7) disconnect from the internet before installing (physically).
  (8) disable your antivirus and software anti spyware applications when you are about
  install SP3.

  Some (if not all) which is covered in the links above.

  Other than the "automatic updates" or the Windows Update web page - how can you
  get SP3?

  Windows XP Service Pack 3 - file to Image CD ISO-9660
  http://www.Microsoft.com/downloads/d...displaylang=en

  Windows XP Service Pack 3 network installation Package for
  It professionals and developers (works as well for you.)
  http://www.Microsoft.com/downloads/d...displaylang=en

• reinstalled xp pro now says that it cannot find server how it connects

  I reinstalled xp pro on my desktop, now it does not connect to the internet. It has service pack 2 and all the drivers are there.

  I found the problem had to reinstall the ethernet driver,

• I need to format and reinstall XP Pro, but I don't have a cd or my key

  Product key number / reformatting

  Hello, I need to format my computer and reinstall XP Pro. I don't have the XP CD that came with the computer or the product key. I have an XP CD from another computer, though. Is it possible to extract the product key from the computer before formatting and use it with the other copy of XP? I don't want to get stuck in the middle of the format!

  Thank you

  www.magicaljellybean.com, download and run. This will show the product key.

  Your version of the operating system is likely OEM if it came with the computer. This key will not work with the software from another computer for this reason.

  You probably need to purchase a version of XP, somewhere.

• Clean, reinstall XP Pro.

  I tried to reinstall XP Pro.  I have the original installation disc, but it won't let me past the page to accept the EULA.  It is said to press F8 to accept the EULA, but when I do, nothing happens.  I tried all the other keys as well.  Nothing happens.  I have to press the ESC key to exit the process and restart.  WHAT SHOULD I DO TO ACCEPT THE EULA AND CONTINUE WITH REINSTALLATION OF XP PRO CLEAN?

  http://michaelstevenstech.com/cleanxpinstall.html

• Hi I bought Acrobat Pro a few years ago. now, I spent from the pc to the mac, but can't seem to reinstall Acrobat Pro. Can download the program, but the serial number is not recognized. Can I still use my Acrobat Pro purchased on my mac?

  Hi I bought Acrobat Pro for my pc a few years ago. now, I spent from the pc to the mac, but can't seem to reinstall Acrobat Pro. Managed to download the program, but the serial number is not recognized. Can I still use my Acrobat Pro purchased on my mac?

  probably not.

  you need a platform swap (Exchange a product Adobe of a different version of the language or platform) but which is only supported for the latest versions of adobe.

  You can get the upgrade pricing and exchange platforms, or use an abonnemement DC acrobat and use on both platforms.

• Due to a corrupted windows profile, I had to reinstall ACROBAT PRO XI.  After re - install, I kep "error 16"!  How can you fix this?

  Due to a corrupted windows profile, I had to reinstall ACROBAT PRO XI.  After re - install, I kep "error 16"!  How can you fix this?

  Hello

  Please try the link below

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

  For more details, please visit https://forums.adobe.com/thread/1177032

  You can also consult Re: persistent Configuration 16 error

  Let us know if this helps!