Relative path problem

Similar Questions

• How to keep a relative path in a global variable

  Hello

  I use Teststand 2013 and 2013 of Labview

  Is it possible to set a relative path to a global variable in the Teststand? E.g. "... \vector1." HWS.

  Or should I use Labview functions to solve this problem?

  .

  Thank you

  The railways are much easier to handle in LabVIEW.  Thus, you can store the relative path as a string and then use LabVIEW to make the absolute path.

  I usually store a file into a global variable and then I can just concatinate the strings to build the absolute path.  For example:

  FileGlobals.Folder = "C:\\foo\\bar\\"
  
  Locals.Path = FileGlobals.Folder + "blah.txt".

• How can I specify relative path to file Subvi to screw?

  I use LabVIEW 2009 Service Pack 1.

  SubVIs are referenced by absolute paths, so when I move to a new folder I may need to adjust their paths again.

  How can I make a Subvi make reference to a relative path that I do not have set his path after you move the screw in a new folder or a new player?

  I think that the SubVIs are referenced internally by relative paths. Once you move the whole project in a new place, he should find everything in the new relative paths.

  Where have you encountered problems?

• Relative paths of the gateway requirements

  So I am using requirements gateway for a little while now and I are one of several developers to use, or one of the many people now the documents it contains.  We keep the Gateway project control requirements of source code with the documents and the project code in that respect.

  We met one of the problems was that this gateway requirements is configured as an absolute path if the path is not under the gateway requirements project path.

  Let's say I have a directory like this structure.

  \Requirements Gateway\ Q:\Project\Project [x]

  [X] Q:\Project\Project [x] \Project Documentation\

  Q:\Project\Project [x] Code\ [x] \Project

  When you add documents to the gateway requirements project it will add them however travel.  So if another developer gets the source on the V:\ drive control then it can not find documents or code.  We found that you can manually change the path of the documents to have a relative path by editing the .rqtf file manually in a text editor.

  Finally the problem.  This solution does not work for code TestStand or paths of LabVIEW code... why?  If I replace "[x] [x] Code\ \Project Q:\Project\Project"with"[, \Project[x] Code\ ' in the .rqtf project file and then open the project, it will say file not found.  The file may have been moved or deleted.  But all the documents that are configured to have relative paths work fine.

  Can someone tell me how to get access roads-related work for LabVIEW and TestStand code in Gateway requirements?  Thank you.

  Hooovahh-

  It is currently a lack of functionality for our types of TestStand and LabVIEW OR gateway 1.1 requirements. This is something that will probably fix us in the next version or Gateway requirements.

  Thank you for that bring to our attention.

• How to build a correct relative path?

  I watched this on the Microsoft Web site, but their views did not work. I have an application called Notepad ++ in my programs folder. The documentation says that so that the spell check function works, I have to include in the configuration of Notepad ++, a relative path to a specific dll in the folder programs. This is the relative path, I built that does not work. Any tips?

  .. \Aspell\bin\aspell-15.dll

  Hi okieseeker,
   
  This problem occurs with a third-party application, I suggest you to contact the manufacturer of the application for assistance on this issue.

• How to create a shortcut with relative path

  Hi all

  I'm a Linux user, so I don't have enough experience to solve this problem.

  How can I create a shortcut with relative path?

  Usually it is easy to create a shortcut with the absolute path for example:
  Windows accepts shortcut path with absolute c:\bin\app.exe, but he does not accept the following relative path:
  .\bin\app.exe

  Hi mbnoimi,.

  Thank you for using the Microsoft Answers Forums!

  To make a shortcut path parent here is a simple solution. Create a shortcut to cmd.exe running the start command to open the current directory. Then set the MDC in the
  The shortcut properties.

  Follow these steps:

  Make a new shortcut to: cmd.exe /c start.

  Now, right-click on it and get the properties of the shortcut (shortcut tab).

  The shortened full path must have been set to this:
  %windir%\system32\CMD.exe /c start.

  Set the directory to "start in" (i.e. DLG) to be a relative path:
  (Example for a shortcut on the desktop

  )
  ...\SendTo

  Click on "change icon...". "and set" look for icons in this. "
  "file:" to:
  %SystemRoot%\system32\shell32.dll

  and press ENTER. Standard folder icon will probably be in the
  bottom right.

  Now you can copy this file and simply change the "start in:" directory
  to book new related shortcuts.

  NOTE: The steps above are just an example so try this at your own risk. And check if it works.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Links-relative path?

  I created a PDF file for presentation to a client.

  There are other PDFs to be accessible during the presentation at certain points.  I put the 'Link To A File' links to the right places in the main PDF file and stressed these secondary PDF.

  I've included with the main PDF file PDF secondary.  Everything is in a single folder with no subdirectory.

  So when I send my client, the file zipped with all PDF files, why is that when my client is by clicking on the links in the main PDF file it is looking for these secondary PDF on MY hard drive!

  I hunted a solution for using relative paths, but Acrobat is emphasizing the ABSOLUTE use, and what he asks me gene huge with my client because I can't make it work for him.

  See you soon

  The path is not absolute, even if it looks like that. You can easily test and see for yourself. Move the file to another folder, and you will see that the path of the link changes with it.

  The problem is probably caused by viewing the file on an iPad. The file system on mobile devices is quite different from 'normal' computers, so I'm not surprised that the links to other files work. In addition, it depends a lot on what app is used, but I think that in this case, it would not matter much.

• How to set the relative path for referrals?

  Hello

  I use FDK.

  I'm trying to work with cross references and I have the problem with the path name < XRefSrcFile >. Every time when I started using F_ApiSetString, it 's defined as an absolute path and I need to put it in the relative path.

  Someone has an idea how solve it?

  Kate

  Kate,

  I can't reproduce this behavior. When I have defined XRefFile as an absolute path, then save under MIFID, I see a path relative to the MIFID. The exception is if I specify an invalid path, FrameMaker retains the absolute path. I don't know what to say beyond that. Are you sure you set a valid path to a file?

  Russ

• Changes of relative path to absolute path when creating a child of the model

  Hello

  I found very useful model Dreamweaver features and was doing well until I created a child by selecting the Site template and the template file in the new Document dialog box to discover the following problem:

  In the template file, a path appears as follows:

  "" < link rel = "stylesheet" type = "text/css" href = ".. /.. / common/css/all.css">

  However, in the case of the child, the same path has changed to the following:

  "< link rel ="stylesheet"type =" text/css" href="file:///D|/xampp/htdocs/xyz.com/common/css/all.css ">

  I want to retain the same relative path in the child's file. Please advise me how it can be maintained.

  Thanks as always,

  EAD

  In the template file, a path appears as follows:

  " href =".. /.. / common/css/all.css '> '.

  It is not possible for a link appears like this in your model. This is because the template MUST be in the templates folder, which is at the root of the site. A single deep folder level, it is only possible to go UP one level to look for any other file/folder in the site. But your link says to go up TWO levels! Something wrong here. Is your template in the Templates folder? Is - this folder at the root of the site?

  Furthermore, Ben's response is quite accurate. Given that DW does not know when your page of the child should be registered, it cannot create the link until it is saved.

• URL relative Paths - to use or not use

  That is the question! :-) (OK, not much of a joke of Hamlet, but I tried.)
  
  Greetings,
  
  I have an APEX application that uses interactive images with hotspots. Hot spots have 'hard-coded' URL in them. This causes some minor problems during the transition from Dev to Test prod. Not a big problem, but maybe they can be eliminated with a relative path of the URL. Which raises a few questions -
  
  1 - use relative URL paths in the hot spots? Are my main concern - there security issues if I do not use the full path, with domain name, etc.
  
  2. If using a relative path of the URL is the way to go - how the domain, part etc. of the URL can I omit and still have the URL work?
  
  3 - depends on the answer to #2 what is the HTTP server and how it is configured?
  
  Thanks in advance, Tony

  hidden wrote:
  In response to your question "how to parent?

  It is an example of one of the URL mentioned earlier...
  http://Fandango.Mgmt.com:7000/apex/f? p = 2031:10:681666703179901:NO:P10_HEADER_ID, P10_CELL_TITLE:8900, 11-4

  How much of it can be omitted?

  Tony,
  When you are within your APEX applications, all you need is the f? p = forward.
  This is because all pages are running from the location f (seen from the point of view of browser). So, if you go to another page of the apex of your URL may start from the f to the front.
  If you wanted to you image would be, in general, go back to the root of the server with /i/image_name.jpg like

  Thank you
  Jorge

• Using a relative path in .txt in expressions

  Hello

  I use AE Expressions script to read in text from an external .txt file. The script works very well, except for the fact that I need the path to the file external .txt to be relative to the project folder After Effects instead of the absolute. The path cannot be absolute, since I use this project "blindly" on different computers with files different works of art/configurations. This is the script I use:

  myPath = "absolute_path/vars/vars.txt";

  Try

  {

  $.evalFile (myPath);

  eval (thisLayer.Name);

  }

  catch (err) {""}

  I tried to put in a relative path in the variable for example myPath "myPath =". " "/ vars/vars.txt. Unfortunately, this does not work. I wonder if using a relative path in the AE Expressions is at all possible and if not, what would be another solution to this problem? (There may be a few plugins out there that could solve this problem?) Any advice or assistance would be greatly appreciated I'm in kind of a pinch of understand this one.

  Greetings,

  Talmon, I am under CC 2014 and I got it works:

  try {}

  myPath = "... / Graphics/ePriceData.txt.

  $.evalFile (myPath);

  eval (thisComp.Name) [index + 1];

  } catch (err) {}

  Err;

  }

  I wanted to refer to the txt file using a pathname relative, and she and the AE project file are in the same folder (Grafiche). Using the above string it seems to work. It kind of defeated the purpose, but it's maybe half a step towards a permanent solution!

• How do you use relative paths in ColdFusion?

  I'm having a problem that I can not wrap my head around. I have 4 sites all reside under C:\ColdFusion9\wwwroot\websites\. Unfortunately, when I use relative paths, he always navigates to wwwroot instead of from this record Web sites. I want to make sure I can use relative paths which are always calculated in the folder root of Web sites instead of the ColdFusion wwwroot folder.

  I had a temporary difficulty just to create a mapping in the CF Administartor. Although, this became a problem because I had to change it whenever I worked on another Web site. In addition, it would work properly if I used a relative as path (/ documents). Instead, it only works if I did a relative as path (. / documents).

  Can someone help me solve this problem? I spent so much time to try things it's not even funny.

  I'm using the CF9 Developer Edition with Dreamweaver CS4.

  CF built-in web server only supports a virtual server for each instance of CF, so you should change it whenever you want to work on a separate site, or create a separate instance of CF using the Instance Manager in CF administrator You won't have a Instance Manager available, given that you have chosen the 'standalone' CF during installation version. If you have reinstalled CF to use the JRun multiserver option, you can install multiple instances of CF and each would have a port separated (8300, 8301, etc.). However, consuming also considerably more resources on your computer.

  The best solution for this is usually to install an external web server, IIS or Apache and use it with your single instance see IIS is a component of Windows, so the version of IIS, you can use is limited by the version of Windows you are using. If you do not have Windows XP, you will be able to use IIS to run several virtual servers. Apache won't work regardless of your OS, but can be a little more difficult to set up.

  Dave Watts, CTO, Fig Leaf Software

• external relative path issues

  I have a movie that uses 9 instances of a symbol of the Virgin 'photo', each with a unique instance name. For each instance, a different .png file gets loaded into an mc nested using the loadClip method. These .png files are not in the library, they sit separately on the server.
  
  The path to the correct .png file is determined dynamically for each instance, taking the name of the instance (for example, luke_mc) and add and subtract some channels to reach a relative path. For example. luke_mc resolves to:
  .. /Portraits/Luke.PNG
  
  It works perfectly in local film tests, but once the files on the server the .png files do not seem to be retrieved. I checked the files are actually in place and that the structure of folders on the server is identical to the local configuration. I am at a loss. Can anyone help?
  
  I will add the code that I use.
  Thank you.

  Paths to all external files are also relative to the location of the html page, not the swf file or any what sovereign wealth funds subsequently loaded. So, if those who have two in the same folder that could be the source of your problem.

• Link to files via the relative path?

  It seems that Captivate is only able to connect to external files via absolute links. In other words, when I create a click box that opens a file and select a file that is located on my development machine, the project will always look this file on my hard drive, even once it is posted on the Web. It's extremely frustrating, and I have not found a work around.
  
  Please help me identify a way to bind using a relative path. In other words, the project will solve it is the current residence and search for content in the directory, it lies in or specified directories under this location. It is the only way that you can create a project that can run successfully during the validation. Captivate already done this, when you create a click box that opens another project, so there MUST be a way to do when opening project files!
  
  Help, please!
  
  Thank you
  Dan Roberts

  You, Mr President, is a scholar and a gentleman!

  According to the agreements that you have described, I was able to create workable links. This should be widely published, I'm sure that many other authors is on the same problem.

  Note to Adobe: the ability to create relative links should be inside the product option, as in most of the other products I've used.

• the frame in the frameset is not the relative path correctly

  http://www.autogamma.com/FastSP/catindex.html

  Click on 'PUMP LAVACRISTALLI' > "Quick Codice" > "PL100.
  images do not work
  In IE and Chrome images work fine

  The frame with PL100,... link to "pompe\PL100.html",...
  Target is the frame named "MAIN".
  In this context, the relative address is lost: the frame does not take the correct relative path, with a new subdirectory "pump".
  Path of the images remain.

  These links have the backslashes instead of slahes forward:

  • http://KB.mozillazine.org/Images_or_animations_do_not_load#Images_do_not_load

  <body><center><font size=2>CODICI FAST</font><br>
  <a href='pompe\PL100.html' target='MAIN'><font size=2>PL 100</font></a><br>
  <a href='pompe\PL101.html' target='MAIN'><font size=2>PL 101</font></a><br>
  <a href='pompe\PL102.html' target='MAIN'><font size=2>PL 102</font></a><br>
  <a href='pompe\PL103.html' target='MAIN'><font size=2>PL 103</font></a><br>
  <a href='pompe\PL104.html' target='MAIN'><font size=2>PL 104</font></a><br>
  <a href='pompe\PL105.html' target='MAIN'><font size=2>PL 105</font></a><br>