release of Windows Update to the shutdown of the pc

Similar Questions

• Windows Update includes the Toshiba driver updates?

  Hello

  Windows Update includes the Toshiba driver updates?

  And if yes, do you know what drivers are included in Windows Update and that would be excluded?

  Thank you...

  Hello

  Microsoft and Toshiba updates are two different things.
  Toshiba drivers are offered by Toshiba, and these drivers are tested by Toshiba. Toshiba has developed a small tool called TEMPRO. This tool runs in the background and look for information on available updates.
  All updates of drivers, tools and utilities does not update automatically. It can be done by the owner of the laptop. TEMPRO just pick up info on the net and to inform the owner of the laptop.

  Microsoft updates are probably known to you. These updates are Microsoft and Toshiba has no influence on this.
  When you check the list of available updates may have included updates to the WLAN/LAN card, driver of the touchpad and device ACPI Toshiba x 64. This is defined as optional updates and cannot be updated.

  To be honest you should not update at all. For hardware use drivers provided by Toshiba only.

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

  Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
  The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

  Hi Ben Dean,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

  To run the System File Checker, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  For more information, see the following Microsoft article:

  This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Is it possible to change the menu of windows update to the much more functional version?

  Is it possible to change the menu of windows update to the much more functional version? The change took place on 07/10/09 and made by selecting which updates to install more troublesome. * Note * I do without roll back Windows Update 7.4.7600.226 Agent that has been installed on 10/07/09.
  This change of format is also just change the switch on for windows 7?

  Hello

  Welcome to Microsoft Windows Vista community forums!

  I am sorry to say that there is no choice left out. You must perform a system restore or uninstall the manual update that is installed.

  Improvements made to the version of the Windows Update Agent 7.4.7600.226

  • Time sweep improved for Windows updates
  • Improved user interface for Windows Vista and Windows Server 2008 - based computers that are running Windows Update
  • More visible and detailed description of updates
  • Improvements in the way in which users are informed about service packs

  For more information, please see the link below:
   
  http://support.Microsoft.com/default.aspx/KB/946928

  Kind regards

  Savan - Microsoft technical support.

• Cannot use windows update, get the message "site has encountered a problem and cannot display the page you are trying to view.

  original title: can't use windows update, get the message 'the website has encountered a problem and cannot display the page you are trying to view. I am running xp. Can anyone help?

  I can't use the update. Still get the same message. Fix - it for Windows can not solve the problem. I am running xp. Help, please!

  Hi Hojo11779,

  You can see the mentioned knowledge base article and check.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Let us know if it helps.

• I am sure that I have sirefef and I can't start the firewall, windows update or the center of security.

  Hello, I'm sure that my computer is infected with a sirefef, I want to know if there is a free way to get rid of it, I ran so many antivirus scanners and malware/rootkit software and is not fixed. When I try to start the firewall, he says that he is unable to make these requests, Windows Update said the service could not be started, and says Security Center of service could not be started. Please help and I hope that my problem will be solved. Ask if you need more details. Thank you.

  Hi Brendan,

  Let's see the article ""failed Windows updates Setup. " Restoration of the changes. "Do not turn off your computer" error when you try to install the Windows updates "and check if we get a fix for the problem.

  http://support.Microsoft.com/kb/949358/en-us

  For now, ignore the steps mentioned under: using the feature in Place Upgrade (Windows 7 and Windows Vista)

  Keep us in the State of the question.

• I cannot use windows update. The 80070490 error keeps coming back.

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• Windows updates downloading the critical updates and fails to install several times.

  Original title : Updates the Windows Updates downloads, but will not install one of them. No error code, just fails to install one of them... many, many times.

  It is a Dell Inspiron 1525 laptop. Windows updates downloading the critical updates, but will not install one of them. Running Vista Home Premium.

  Hello

  Step 1:

  Try disabling the security software and then try to install the updates,

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Step 2:

  In addition, perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After having apres avoir effectue done the steps of troubleshooting, follow step 7 to start the computer again normally.

  Step 3:

  Please try and run the steps listed from the link below,

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  To find the error code,

  a. Click Start, then in the type of research to start, Windows update and press ENTER.

  b. click view update history.

  c. double-click the update failed, where you can find the error code.

  Reference:

  What are the error codes and how can I use them?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

• Windows Update installs the same update everytime I stop. The update is successful but remains as an update. KB2633171.

  Original title: update continues installation KB2633171

  I Windowd Home Premium and windows update installs the same update everytime I stop.  The update is taken with success but remains as an update.  KB2633171 is the update

  Hi whales,

  I suggest that you check the troubleshooting provided in the link mentioned below steps to solve the problem with Windows Update offers repeated updates.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope this helps

• Windows Update is the cause of disk space in drive c

  Windows Update is the cause of disk space in drive c

  Hello, Josée Talukdar,.

  Thank you for your message.  Please see delete files using disk cleanup for the means to recover space on your hard drive.  Let us know if it did or did not help to solve your problem.  We can't wait to hear back on your part.

  See you soon

• WSUS issue error 800 b 0001 code found in Windows update of the client.

  We used WSUS server 08 to Headquarters for a few months without any problems.  Initially, all our machines HQ & branches are pointed to it.   Recently, we configure WSUS in the branches which is the server WSUS downstream headquarters.  We have created an advertising policy for point machines branches to them.  Machines of branches are automatically detected in the new WSUS server, however, none of the machines' reported in.

  Error code 800 b 0001 found in Windows update of the client.

  Help, please.  Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Windows Update broke the card drivers and graphic display; Impossible to reinstall either.

  On 5 October, I installed two optional Windows updates:

  1 - display - nVidia NVIDIA GeForce 6600GT

  nVidia Display software update released in July 2010

  2 Samsung - display - SyncMaster 2494SW (digital)

  Updated software Samsung screen released in August 2009

  After installation and reboot, my screen resolution is now set to 1280 x 1024 (max resolution) and the monitor is not recognized in front of a default monitor. -http://www.verityhw.com/uploader/files/1/display_settings.png

  I tried to install the latest nVidia on their site (258.96) drivers, and they say that they installed, but on reboot, there is no change.

  I tried to install the drivers for the monitor Samsung 2494SW, but he does not see a device to install the drivers on. -
  http://www.verityhw.com/Uploader/files/1/2494sw_driver.PNG

  I looked in the Device Manager and saw that there was an error with my nVidia 6600GT. -http://www.verityhw.com/uploader/files/1/device_manager.png

  By clicking on properties, I see that the error is Windows has stopped this device because it has reported problems. (Code 43) . -http://www.verityhw.com/uploader/files/1/6600gt_properties.png

  Of course Windows has not completely stopped the device because I still have the graphics, although terrible ones.

  I looked at the drivers installed for the 6600GT and they seem to be the most recent of those (8.17.12.5896).

  At this point, I'm all out of ideas. Everything worked fine before the Windows Update and there is apparently no way to uninstall updates. (I tried to uninstall the drivers of the 6600GT, but it just keeps back to 8.17.12.5896's).

  Any help is appreciated!

  This Forum of WU is for Win Vista, XP & Win 7 if posted same in Win7 forum.

  Perhaps an SR is your next option.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows Update received the error Code 80070005

  Error code 80070005 Windows Vista update

  Hello

  These links may help you to make the most of who more automatically.

  It is a very difficult to solve. What are the items in the KB if it has shown that the installation of not?

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  Those are kind of prerequisites and probably will not solve the problem.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on
  Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  Its usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.