Release the Ultrabay W510 - what is broken?

Similar Questions

• What is the GUID that we get everything by releasing the device by entering the password?

  Hey guys,.

  I use a class that implements GlobalEventListener. What is the GUID that we get everything by releasing the device by entering the password?

  Concerning

  Raki

  The list of public events can be found here:

  The system global events

  http://supportforums.BlackBerry.com/T5/Java-development/system-global-events/Ta-p/444824

  Note that the release event is which are listed there, but you can capture this event using the PersistentContentListener.

• HARD drive caddy gets stuck into the Ultrabay slot. T510.

  I bought myself a caddy of SATA hard drive on ebay (Yes, a knockoff of one) and put it in the ultrabay with an SSD inside housing (the plan was to clone my current drive for the SSD and then put the SSD into the slot of the readers later). The caddy went fine, but now it just won't come out. I push the release switch and try to push the second switch upward, but it is completely stuck in there...

  My first plan was to remove the keyboard and just take a look to see if there's anything obviously wrong. This plan was stopped when one of the screws holding the keyboard in place was too tight, and they are really small screws. I didn't try not more scared to round the screw head.

  If at this point, I'm probably going to have to send walking back to Lenovo and ask them to disassemble the laptop to get that thing. Until I do that, someone has ideas or ideas on what could be done?

  
  

• How is - a to add an SSD to the Bay W510 adapter?

  Hi people,

  I add a SSD 128 GB Toshiba (Lenovo) to the Thinkbay Hard Drive Bay Adapter.  What should I do to make it active?  Other users say they have this work, but my computer he doesn't even though Device Manager and the Lenovo do Toolbox.

  Can I special software?  Should it be formatted?

  TIA,

  SD

  SD wrote:

  Hello

  I have no problem to the SSD in the W510 Ultra Bay hard drive adapter.  The problem is that "My computer" (Windows?) does not recognize.  Devices and Lenovo do Toolbox Manager.  How can I get the new drive recognized?  Notice that this disc is inserted into the Ultrabay slot not in primary hard drive Bay.

  Thank you

  SD

  SD,

  You must reformat the drive to NTFS,

  See YouTube: format SSD drive

  I hope this helps.

• I'm new on El Capitan.  Window, emerged that says 994 issues found with a button to click to start the repair.  What is a legit Apple window?

  I'm new on El Capitan.  An arisen window that says 994 found subjects (files duplicated, System & unwanted internet, recoverable unauthorized software & disk space) with a button to click to start the repair.  What is a legit Apple window?

  Not enough information. Please be more complete. It would also help if you can provide a screenshot of this:

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• A good day! Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

  A good day!

  Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

  It is a support so nobody user forum here can help you. Maybe if you release with Apple itself.

  http://www.Apple.com/contact/

  There are links here to the online store.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Install the hard drive in the ultrabay slot Gets the benefits of the active protection system?

  Hi all

  I have a 500 GB 7200 RPM hard drive I bought Lenovo and a hard drive caddy that is the thin (so there is a slight gap for those who are curious) on the thinkpad t510. what I was wondering is I dualboot on it (linux on the 500 GB) and I'm wondering if when I use windows, is the second hdd always get protected against shocks and other potentially dangerous damage of active protection system which is present for the hard disk which is preinstalled on your laptop

  Based on marketing materials, it seems that the UltraBay has this feature as well.

  http://www.PC.IBM.com/us/think/thinkvantagetech/APS.html

• Multi-function generation creates code that calls releases the memory it has no allocate

  Generation of a panel based on our ActiveX component generates the code below.

  My problem is that it is free memory that it does not allocate - a bad programming practice. The user must allocate a buffer for testFilePath, but this method releases.

  Problem is known by a side effect of this:

  http://digital.NI.com/public.nsf/allkb/205CA72511BC735C862570F80019660A?OpenDocument

  John Barton

  ----------------------------------

  HRESULT CVIFUNC XJIntegrationOCX__XJIntegrationSetTestSystem (CAObjHandle objectHandle,
  ERRORINFO * errorInfo.
                                                                char * testFilePath,.
  VBOOL * arg2)
  {
  __Result HRESULT = S_OK;
  XJIntegrationOCX__XJIntegration_Interface * __vtblIFacePtr = 0;
  int __didAddRef;
  int __errorInfoPresent = 0;
  BSTR testFilePath__AutoType = 0;
  VBOOL arg2__Temp;

  __caErrChk (CA_CStringToBSTR (* testFilePath, & testFilePath__AutoType));

  __caErrChk (CA_GetInterfaceFromObjHandle (objectHandle,
  & XJIntegrationOCX_IID__XJIntegration,
  0, & __vtblIFacePtr, & __didAddRef));
  __caErrChk (__vtblIFacePtr-> lpVtbl-> SetTestSystem_ (__vtblIFacePtr,
  & testFilePath__AutoType,
  (& arg2__Temp));

  If (testFilePath)
  {
          CA_FreeMemory (* testFilePath);
  * testFilePath = 0;
  }
  If (testFilePath)
  __caErrChk (CA_BSTRGetCString (testFilePath__AutoType, testFilePath));
  If (arg2)
  {
  * arg2 = arg2__Temp;
  }

  Error:
  CA_FreeBSTR (testFilePath__AutoType);
  If (__vtblIFacePtr & __didAddRef)
  __vtblIFacePtr-> lpVtbl-> Release (__vtblIFacePtr);
  If (FAILED (__result))
  {
  If (testFilePath)
  {
  CA_FreeMemory (* testFilePath);
  * testFilePath = 0;
  }
  }
  CA_FillErrorInfoEx (objectHandle, & XJIntegrationOCX_IID__XJIntegration,
  __result, errorInfo, & __errorInfoPresent);
  If (__errorInfoPresent)
  __result = DISP_E_EXCEPTION;
  Return __result;
  }

  Hi John,.

  This parameter is supposed to be an output parameter? If so, so that the code looks right to me. The function expects a string to pass, and then returns a different string via the same parameter. In this case, by the rules of the ActiveX, the method releases the original string after using it, and then allocates a new string. The only difference between a typical ActiveX interface and this wrapper CVI is that with a typical ActiveX interface it would operate the BStr strings instead of the C strings.

  Because the function redistributes the buffer after the release of whatever you spend, you should not change this buffer memory management in client code. The hope is that you allocate memory initially, then call this function and then free the memory some time after the return of this function. The fact that this function of reallocation of memory at the same time should not affect this process.

  If you use invalid free question, a couple of things to watch are that: 1) when you allocate memory initially, you do not use a different allocater, such as malloc in the C library, for example. If you need to allocate explicit memory, you must use CA_AllocMemory, which is what the ActiveX library and 2) that you don't have multiple references to this pointer that could potentially be released several times.

  Luis

• Do not release the validation fees...

  I use a program (one), increases the load of the validation, I have quit the program, the costs of validation is not going back to the number started with. He usually keeps 3-8 more than when the program began. I have to restart the cpu to return to normal. Then it does it again and again and again. How to clear programs have used?

  I use a program (one), increases the load of the validation, I have quit the program, the costs of validation is not going back to the number started with. He usually keeps 3-8 more than when the program began. I have to restart the cpu to return to normal. Then it does it again and again and again. How to clear programs have used?

  You mean 'total', 'limit', or 'pic' commit charge?

  Why worry about the charge of validation?
   
  Is there a problem?  Do you get any error messages?

  The amount of physical RAM do you have?

  Let Windows manage the pagefile or you did manual settings?

  Finally, some applications are just badly written and not properly release the memory.  Assuming you are talking about the costs of 'total' validation does not down, what app (s) is involved?

• Ban for x 201 care (specifically the Ultrabay)

  Hello

  Recently, I replaced my T61p with a new x 201. I bought the ban with her, thinking that it a good way to do a quick loading and a good basis for expansion with other readers, etc.

  However, I am looking to get a small boost in power graphic here and, having exhuated options for express card (for less of ~ $ 500, what is) I wonder now what kind of options are available for the ultrabay slim housing.

  Now, I don't mean graphic design of games, or whatever it is particularly intense. I'm looking to make a few basic/intermediate CAD 3d work (specifically with Solidworks). so, if there is a firmware update solution or I could manage I'd rather widely only.

  In the absence of a prepackaged solution, what are the specifications for the ultrabay? total for example, bandwidth, what kind of overhead should have, it transmits a PCIe 1 x or equivalent Bus connected to the Northbridge? or is it a format purely propreitary? I realize that it routes through this connector on the base of the computer, so maybe I should ask about this.

  If I have to, I can buy a graphical extension of lenovo, go directly to the motherboard or through the expresscard slot, but I was under the impression that the mobo on the x 200 series was fairly strict no expansion, and that the single PCIe location was 1 x running to the ExpressCard 54.

  Thanks in advance,

  Thüringen

  I have a job in my X 200.

• My CD does not open to insert the disc. What should I do?

  I try to open my CD to insert another but it does not open. The green light doesn't even come. What should I do?

  Access the list of unity in workstation. Right click of the mouse. Eject appears in the context menu? If so, the left mouse click.

  If no joy:

  Windows output to power. Examine the control panel of the device to CD. Locate a small hole. Carefully insert a tip of a paper clip or a small wire blunt into the hole until you feel a slight 'give '. Apply modest pressure to release the mechanism. The tray should open.

  To test:

  With the computer and Windows to the top of race Amend, insert a known-playable CD. If no answer, you probably need to replace the uinit.

  Tom Ferguson

• Whenever I try to install Photoshop, the progress bar is 84% and then quits without completing the installation.  What can I do?

  Whenever I try to install Photoshop, the progress bar is 84% and then quits without completing the installation.  What can I do?

  Please see the download and installation of the below help documents:

  Download cloud creative to troubleshoot and install questions

  Adobe Creative Cloud Desktop App could not be installed error

  Download error, installation or update of Cloud Creative applications

  The problems with the installation logs

  You can also try to download from here:

  Direct download links of Adobe CC 2015 : designer Cloud 2015 release

  Guinot

• Y at - it something to release the 2 versions of the iPad app?

  I have published two folios for ipad, v25, v29. Do I need to release the v25 first, or there at - there a trick to this? Here is a response from one of our subscribers.  Why is - what happens to it?

  "I love the addition of the tablet that I live overseas and it is difficult to receive the magazine with our antiquated post office.  I get cards from Christmas in July!  Please note that I have an ipad 1st edition and now it won't let me download the number of March because I could not go to IOS6.  May I ask Apple to allow the magazine to go on it's?  I could download the Exploration special glaze, who arrived at the same time.  I will not renew my subscription because of this problem and I hate missing the magazine.  Once I can update my ipad to a version more recent, will then renew my subscription unless you can fix the problem. »

  IT IS THEREFORE A PROFESSIONAL EDITION MULTI FOLIO MAGAZINE. I HAVE PUBLISHED TWO DIFFERENT OF OUR MAGAZINE ISSUE EXACTLY THE SAME WAY AND AT THE SAME TIME. I HAVE PUBLISHED TWO NUMBERS WITH 3 FOLIOS. A V25, V29, 1024 X 768 1024 X 768 AND V29 1000 X 750. ONE OF THE ISSUES WORKS ON IPAD ONE, THE OTHER QUESTION DOES NOT WORK. WHAT COULD BE THE PROBLEM?

  
  

  Unfortunately cannot publish two folios with the same size and different versions of spectator target and wait for the Viewer to take the right one. Our logic of Viewer does not work like that. The only way for your customers to the iPad 1 see the content must have a folio v25 published and have it be the folio only 1024 x 768 in this account.

  One thing you could do is to create a new publication for all your slips v29 account, put everything on this account and update your viewer v29 so from there, he shoots folios. Leave the other account around for folios v25 for your readers to the iPad 1.

  Neil

• Releasing the clipping with masks mask nested clipping releases each of them.

  Hello. Often, I find that I have several clipping hide groups contained inside a larger clipping mask.

  When I release the main clipping mask, all of a sudden all the clipping masks that were inside are also released, ruining my design.

  Is there a reason for this? I'm doing something wrong?

  It doesn't seem like it should work this way.  If I take off the cover a large box containing several small boxes, the smaller boxes do not lose their cover as well. Please help, what I will meet all the time at work and I slowine down.

  Thank you.

  If you want so broadcast as a clipping mask, select it with the direct Selection tool or the palette layers, and then run the command of liberation.