RN204 not reconnect the USB in the port back after reboot.

Similar Questions

• External Toshiba HARD drive not recognized on USB 2.0 ports, but only on USB 3.0

  Hello

  I have a Toshiba drive external HARD 750 GB USB2.0/USB3.0
  Now, this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port.

  I have try on port USB2.0 computers different (desktop, laptop) but it doesn't work. The LED is the lightning, but the drive does not appear in the file Explorer.

  You have any ideas?

  Thank you

  > Now this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port

  USB 3.0 port 900mA feeds. The USB 2.0 port common provides 500mA.
  I think that the HARD drive needs more 500mA power in order to work properly.

  So if you want to use the HARD drive on USB 2.0 ports, I recommend you to use a USB Y cable which allows to connect the HARD drive to two USB 2.0 ports

• I can not download the trial version after effects CC show me a message in the page: we are experiencing some problems, please try again later. If the problem persists, contact customer support.

  I can not download the trial version after effects CC show me a message in the page: we are experiencing some problems, please try again later. If the problem persists, contact customer support.

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  Maybe it's a false error that hides the real problem... a 32-bit computer

  You MUST have a 64-bit computer and operating system... What is your computer?

  -http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit

  -Programs are supposed TO not view or download if they are not installed on your computer

  -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• Satellite M50D - Has: devices of USB 3.0 not working in USB 3.0 ports

  I use 2.0 devices in the ports of 3.0 fine, but my 3.0 Flash Voyager USB3 8 GB device will not work. It connects then disconnects once, not appearing is not in the Device Manager to all.

  I tried to install the USB driver out this version of the site 2.0.10.273 - 130101 has for my model. It made no difference.

  Install Windows 8.1 system

  Any ideas? Thank you.

  You are able to use this USB through a USB 2.0 port?
  Check it out.

  But at this point its not easy to tell if its USB device issues or problem of USB port.
  If other external USB 3.0 devices work properly in the frame of your laptop, the problem is related to the Flash Voyager USB

• External USB 3.0 HARD drive does not work on USB 3.0 port

  Hello guys,.

  I have a problem with my external HARD drive and the problem is that it is USB 3.0 feature does not work in my computer.

  The curious thing is that it works very well in the SATA port or a normal USB 2.0 port.

  Y at - it a failure with the HARD drive or is there something wrong with my motherboard (M5A99 fx pro r2.0)?

  Thanks in advance.

  From my point of view of the few is not HARD drive problem because the HARD drive operates in a USB 2.0 port.

  I m wondering if you tried to update the USB 3.0 driver.
  Have you tried this HARD disk in another computer / USB 3.0 ports?
  I think that its worth a check.

  Also, I read on some problems of USB 3.0 controller from different manufacturers.
  Sometimes, it might be possible that some problems of compatibility between different devices may arise.

• USB keyboard not recognized on USB 2.0 Ports

  Hello, I have a dell inspiron 3521.

  It has:

  2 USB 2.0 ports.

  2 USB 3.0 ports.

  Whenever I connect my USB keyboard to any port 2.0, it is not recognized.

  Instead, it is shown in the unknown devices section.

  Earlier, when I had problems with the host VMWare keyboard driver, I had disabled, uninstalled, deleted ad form pilot system via the Device Manager.

  Then the keyboard worked until you restart.

  Now, it is not recognized on all USB 2.0 ports, but works perfectly in a USB 3.0 port.

  I tried the following:

  Uninstalled the USB drivers and restarted the system.

  Tried to update the driver software (all Device Manager).

  Tried with another keyboard, but it does not work either.

  What should I do next?

  Please suggest me some solutions.

  Hi AdityaMudgerikar123,

  I would recommend that you consult article Troubleshooting wired keyboards that do not or evil characters such.

  Thank you!

• Drive HARD TOSHIBA CANVIO 3.0 does not work with USB 3.0 ports

  Hello

  I bought an external TOSHIBA HARD USB3 CANVIO 3.0 disc MORE.
  I and laptop computer from other manufacturers that support USB3. When I connect the USB2 HARD drive it works and I can copy or paste my files but when I connect the HARD drive to the port USB3 that it doesn't work and my laptop cannot detect HDD with USB3.

  I've updated my driver USB3, once again, but when I connect it to USB3 just turn on the blue light and nothing more.

  Please tell me what can I do to solve my problem?

  This link is my HARD drive type and model: http://storage.toshiba.eu/cms/en/hdd/external_drives/

  Thank you

  Have you tried to contact support for laptop and ask whether something should be activated or changed for this port USB3.0? Maybe some BIOS settings.

  If possible, try to check the functionality of some other USB3.0 available PC/laptop.

  As much as I know there not something special that will help you. It is Plug & Play device.

• Stereo does not read the Sansa Clip after firmware update

  Hello

  I upgraded to the last 2.01.35a of the previous 32.

  Before that, my channel stereo would connect to the Clip and play songs using the USB connection, I can use the remote to change songs, now with the new update of the firmware it does not read the content of the Clip.  Clip said 'Connected', but the stereo repeat me 'Reading' forever.

  I came back to the previous version and it works again.

  Is there a problem with the latest version of the firmware?

  Also, since I was in Europe, Updater I updated the European version and this limited the volume a LOT.  So I downloaded the US version is now at normal volume.  The European version is too quiet and I can't hear a thing if there is a background noise. But still, the USB connection in the stereo works with version 2.01.32 and not 2.01.35.

  any ideas?

  Thank you.

  one.

  Hello

  I tried AutoDetect, MTP and MSC and none worked.

  Now everything works well again, and I will consider the reset factory settings to change the region for other times.

  Thank you.

• Will not import the Raw files after...

  My MacBook Pro has a large part of this memory maximum... To free up space that I deleted some of the LR (Version 6.5 Camera Raw 9.5) keep on your computer to work with smaller files...

  Now, I wanted to go back and import some of the original RAW files from an external hard drive and LR does not recognize or products are imported...

  What I so can't do this solves so I can work with the... original RAW files?

  You cannot correct the error "file not found" by importing. It's 100 percent the wrong thing to do in this situation.

  You must reconnect the photos in Lightroom by following the instructions here: Adobe Lightroom - find folders and files moved or missing

• Could not start the Apps level after movement Machine OS

  Hello
  
  I am Oracle EBS 12.0.4 on IBM AIX, there was activity on the side of the BONE to move the Machine. After the physical movement of the server has been started, but now the listener fails to start, the following errors were found in the journal of the listener
  
  System settings file is /u01/oracle/PROD/inst/apps/TEST_ebscl2/ora/10.1.2/network/admin/listener.ora
  Log messages written to /u01/oracle/PROD/inst/apps/TEST_ebscl2/logs/ora/10.1.2/network/apps_prod.log
  Trace information written to /u01/oracle/PROD/inst/apps/TEST_ebscl2/logs/ora/10.1.2/network/apps_prod.trc
  Trace level is currently 0
  
  Started with pid = 479272
  Error listening on: (ADDRESS = (PROTOCOL = TCP (Port = 1626))(Host=ebscl1))
  TNS-12542: TNS:address already in use
  AMT-12560: TNS:protocol adapter error
  AMT-00512: address already in use
  IBM/AIX RISC System / 6000 error: 67: address already in use
  
  Check the listener.ora, check etc/hosts, but another thing that should be checked?
  
  Any help will be appreciated.
  
  Thank you
  
  Published by: user8676543 on April 13, 2011 03:26

  Salvation;

  Please check below note that might be useful for your question:

  Listener fails to start on Linux, errors with TNS-12542, Linux error: 98: address already in use [301014.1 ID]
  Listener fails to start with TNS: Address Already in Use (TNS-12542 TNS-12560 TNS-00512) [ID 416566.1]

  Respect of
  HELIOS

• AirPlay works do not on the Yamaha device after upgrade iOS10

  After getting the update to iOS10, my Plus 6 iPhone no longer works with my receiver (RX-V679) Yamaha, which has AirPlay connectivity (audio). Before the upgrade of the iOS10, the AirPlay feature worked perfectly, and now, when I tried to connect my receiver, after 20 seconds, displayed an error message when trying to choose the secondary speaker (Yamaha device) on music app.

  He was not on the receiver configuration changes (the firmware is up to date).

  I tried to reset the configuration to the standard values, but without success.

  I tried to reset the configuration of the router (in my network), but without success.

  I restored my iPhone, but without success network configurations.

  My MacBook Pro too (which worked too much on AirPlay with my receiver), now after the upgrade to the Sierra of macOS, lead to works too, appearing in error when try to connect with the Yamaha receiver.

  Someone has to give directions?

  Hi Andresaragao,

  in the case where you have all the answers to this yet, I just spent a few hours, I'll never come back with Apple support and after being up for the specialist wireless, she basically just told me the following,

  'pull up your control from the bottom menu as you would normally access your airtime menu', 'then slide your screen from right to left, your will menu airplay then introduce yourself inside "...

  Wow, you'd think that Apple would make a mention of this when they release a new iOS and make such a change...

  Bernie

• Why the weather application does not meet the 3D touch after update in 9.3?

  I just downloaded the new update in 9.3 and I was under the impression that the weather app would be able to meet 3D touch, being that mine is not working the case.

  KIM I had the same problem. Apple said that I should do a restore. Blah blah blah.

  Bottom line, tactile 3d Weather app did not work. I deleted my save locations in App is weather. 3D touch works. I have readded my places. Still works.

  I hope thay works for you.

• my calendar does not show the events back - but they are on my Macbook Pro

  My iPhone calendar does not display the back events before the current month - they are deleted or hidden? - but they still exist on my MacBook Pro.  How can I restore the history in the iPhone calendar?

  Try the settings > Mail, contacts, calendars > calendars > synchronization > all events - on the phone.

• Tecra M1 does not recognize the DVD drive after replacement

  I am trying to install a new drive CD-RW/DVD-RW on a Tecra M1; However, when the computer does not recognize the drive.

  Is there a solution to this?

  Thank you

  Colin

  For me it s case.
  I would say that the BIOS can't handle the new player properly because of the wrong master/slave/c-salt settings
  Readers slim for computers laptops support setting master/slave/c-salt settings and these settings can only be changed by changing the rider as on desktop drives.
  So it is very important that you purchase a compatible player and supported because disks with incorrect settings will not work.

  Before buying a car, you should ask the service provider to Toshiba for a caught player supported and compatible

• HP Jet 13: could not get the usable screen after you enter the password when you restart

  After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery.  After the press, I have the icon pushing, my name, email and password.  By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.

  That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online.  Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.

  Please let me how to restore my system or to whom to return it.

  Thank you

  The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K