Reminder error when adapter on LabVIEW 12.0.1

Similar Questions

• Error when create control LabVIEW FPGA CompactRIO

  I have error when you try to create a new model of LabVIEW FPGA CompactRIO control project. I tried with LabVIEW 2014 and 2014 SP1 update. This error always occurs.

  Please help me with this.

  Kind regards

  Thang Nguyen

  Hello

  I fix the problem by removing LabVIEW 2014 SP1 and reinstall again. After the reinstallation of LabVIEW, I create the project template.

  Kind regards

• error when pass array 1 d by data in table pointer via Labview-built c++ dll

  I'm trying to generate a Labview VI to a DLL and let it be invoked by vc ++, by which a 1 d array is passed. However, I can't generate the DLL when you use the data pointer to the table, which gives the error like below:

  [ERROR]
  Code :-2147221480
  Strengthening of the DLL.
  Error when compiling the DLL as a function name or a parameter is illegal. Check function and parameter names are legal C identifiers and are not inconsistent with the LabVIEW headers.
  Additional information: 9 project link errors
  Type Library generate error. MIDL.exe failed during the compilation of the odl file used to create the type library.
  Note: The error indicates that the odl file has unknown types. This error is possible when
  works with non-standard types is exported using the method qualifier exporting files in
  release the configuration that have not been recompiled during the build process.

  The Prototype of VI define is as below

  

  But, if I use the pointer to manage through the table, the generation is successful, error-free. I write something to call the DLL built labview, which basically reads 1000 double the data of an instrument.

  #include "TestDQMaxDLL.h"
  #include 
  
  using namespace std;
  
  int main(int argc, char** argv) {
      cout << "Start testing DQMax DLL" << endl;
  
      int leng{ 1000 };
      DoubleArray rawDPData = AllocateDoubleArray(leng);
      test_dqmax_dll(&rawDPData);
      cout << "Successfully invoked the DLL!" << endl;
      cout << "DoubleArray.len: " << (*rawDPData)->dimSize << endl;
      for (int i = 0; i < leng; i++)
      {
          cout << (*(rawDPData + i))->elt[0] << "\t";
          if (0 == i % 10)
          cout << endl;
      }
  
      system("pause");
  
      DeAllocateDoubleArray(&rawDPData);
  }
  

  But the printed results are not correct.

  My questions are:

  1. why cannot generate DLLS with the data of table pointer. In this case, the argument of the function is as simple as a double array.

  2. for table handle pointer, when the resutls are incorrect and how to get the good ones.

  Any comments would be appreciated.

  BTW: I use Labview 2012 with Visual c ++ 2013 on Windows7 64 bit.

  I never needed to pass a table of LabVIEW handle external code. Search this forum for posts of RolfK, it is most likely to have posted such an example. I recommend that you keep things simple and remodelling your table a table 1 d 2D before moving on to external code and manage as a 1 d table (it's just a little extra math).

  Sorry I don't have a solution on why you can't build with a 1 d as a pointer of table table. If you post your project I'm happy to try to build (I'm on LabVIEW 2012, however), but as you said, it will rely on another machine, it seems more likely to be a problem with something on the specific computer where there is a problem.

• Thread: Error when calling a database adapter

  I got the following error when I invoke a task in the service process that contains the data adapter.
  
  LIAISON. JCA-12511
  JCA Binding Component connection problem.
  JCA Binding component is unable to create an outgoing connection of JCA (CCI).
  SaveMessageProject:LocalDB [LocalDB_ptt::insert (MessagesCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. JCA-12510
  Location of JCA resource adapter error.
  Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / >
  The Binding of JCA component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = ' EI/DB/localDB.
  The reason is most likely to be
  (1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or
  (2) the "< jndi name >" element in weblogic - ra.xml has not been defined in eis/DB/localDB. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR).
  Please fix this and then restart the application server
  
  Please ensure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections.
  
  I miss nothing need to do on the weblogic?
  The steps I did to deploy are simply click on the service to deploy on Jdeveloper and following the wizard to deploy on the weblogic application server.
  
  Please help, I am so depressed on this subject.

  I guess that's #2, which means that you must create a Weblogic JDBC data source and also a connection pool. There are instructions to act quickly in the doc of installation Instructions here:

  http://www.Oracle.com/technetwork/middleware/soasuite/BPM-11g-sales-quote-demo-Setup-and--131283.zip

  Hope that helps you out of your depression :-)

• LabVIEW 7.1 gives error when loading files

  Hi all

  I get missing VI error when I opened a file .vi .it charge about 480 sub translation problem - VI I face is that by loading of the Subvi

  will lack & when I opened this particular sub - VI, then the error message goes away.this is not specific to a particular subvi.anytime

  I open the program list of the vi missing is not the same as the earlier.since I'm going to convert it into a .exe file & if missing a few vi

  so this is incorrectable.also massive compilation is not the case

  in the hope of a quick response

  Dhiraj Kumar

  Hello

  Is not the problem of Version 7.1, I think you may have changed the location of the Subvi or changed the name of the VI. So generally I suggest you to keep all the Sub - VI slot in the same place, all in the same folder and link to the VI main if you change the name also to relate to the main VI and then save. To do this, and then create the EXE file.

• We Build wave error when make it executable

  Hi guys,.

  It is a long shot, since I don't have much to go off in addition to a very vague survey error. The Details area looks like this:

  Click on the link below to visit the Application Builder support page. Use the following as a reference:

  Error 6a held to invoke the node in AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File generic i/o error.
  =========================
  LabVIEW: File generic i/o error.
  =========================
  NOR-488: IO abandoned operation.

  Name of the method: Build: Application

  This error sometimes quickly,<10% progress="" on="" the="" build.="" other="" times="" it="" looks="" like="" the="" build="" has="" nearly="" finished="" and="" then="" it="" pops="" up.="" i="" used="" to="" be="" able="" to="" make="" a="" successful="" build="" by="" just="" trying="" a="" couple="" of="" times,="" but="" now="" after="" 10="" or="" so="" tries,="" it="" still="" looks="" like="" it's="" not="" going="" to="" work.="" please="" give="" me="" any="" suggestions.="" thank="">

  You know what... I remember having an error when generating an EXE file.  I don't know if it's the same exact error that you are talking about here, but your post reminded me earlier.  The solution I found was to make sure that I didn't have the target folder open when building it.  You may not be displaying the content of the target folder.  Try and see what happens.

• cDAQ-9172 error message 200485 in Labview and 88705 Max

  My company has had this machine for awhile not operational.  I decided it was time to get this thing running but continue to flock to the top with a 200485 error when I try to run Labview and 88705-error when I try to change anything in the cDAQ-9172 runs at MAX.  I'll try to update the software and reinstall the drivers in the hope that it is a mistake to simple communication from the device to the computer, but in case it's something more serious that I am not seeing that I wanted to post this in the hope that someone might have an answer.  Thank you

  I would start by checking the device loader OR. Error 88705 in MAX is caused because the Windows Service OR device charger has not been loaded. Below is an article about starting the service knowledge base.

  http://digital.NI.com/public.nsf/webPreview/89A6279147AA994A862572DF00491BCA?OpenDocument

  Thank you

  Steven Koo

• Why do I get an error when I try to change the mode of scanning by programming engine?

  Hello

  I have a problem with my EtherCAT system.

  The system contains:

  a RT PXI-8840

  2 position with EtherCAT sensors

  and 8 inverters with EtherCAT (with Softmotion plugin and xml file)

  I use LabVIEW 2015 with RT and FPGA Softmotion module.

  At the beginning of my code I pass the engine scan mode in configuration mode and then the active mode programmatically. It works well when I start my code with LabVIEW but I get an error when I use a startup application. The error code is-2132869095 (the deployment link has expired). I've tried also with a code containing just the screw for the switching of the mode of scan engine and nothing else. With this, I get the same error.

  The problem occurs when one or more inverters are involved in the project.

  Anyone an idea what I need to do to avoid this error?

  Thank you.

  Hello

  the two cases mentioned in my last post have solved the problem. I have to follow this exact sequence and I expect that the analysis engine is running.

  Now, my startup application runs.

• DAQmx error code load 3 - Labview 8.6

  Hello
  I am trying to build an executable using the Application Builder in Labview 8.6

  I get the following error when I try to run the executable file on another computer without having to install the LABVIEW runtime engine.

  «Year error occurred loading VI ".vi DAQmx create calendar Source (void)".» LabVIEW support 3 error code: could not load façade. »

  Your help is greatly appreciated.

  
  

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• Loading of a DLL on RT: Missing Export "DecodePointer" "Kernel32.dll" and 7 error when calling the DLL

  Hi, I recently changed to Visual Studio 2010 and Windows 7 64-bit.

  I have an existing Office RT system running RT 2009.  This system calls a DLL that I already built using Visual Studio .net 2003 and Windows XP.

  Since I've recompiled the DLL I get an error 7 file not found error when I call the RT DLL, even if I simply replaced the old DLL with a new one in the file system so the path has not changed.

  I also noticed that the message on the screen connected to the RT system during startup:

  "achieveworldpeace.dll" load error: lack of export 'DecodePointer' of ' Kernel32.dll'.

  Any ideas on this problem?  It is perhaps as simple as a switch in the compiler?

  Thank you.

  I'm not sure it's a simple switch in the project settings in Visual C. The problem is clearly in the standard C runtime library that gets linked to your DLL and refers to exports of Windows which are not available on the RT system. Don't forget that the RT system is a limited Win32 API emulation.

  I usually avoid these problems using Visual C 6 to create DLLs for LabVIEW projects. The standard library of the C runtimes will not know what Windows API reference more recent exports because they have supported even under Win95. So unless your explicitedly reference code not supported RT APIs you wouldn't have problems. If you do not use the standard C file i/o functions and management of memory in your DLL functions, you can also try to link statically C runtime libraries in your DLL, or vice versa depending on what you have now. It may or may not work. Otherwise there is not much else but by using an earlier version of Visual Studio.

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• IMAQ.dll error when starting Windows

  Hello

  I have a little problem with Labview 8.6. After you have installed the driverpack for the dvd, my windows give my error

  Der Prozedureinsprungpunkt wurde in DLL "IMAQ.dll" non found "ProgramFPGAs".

  My tranzlation

  the "ProgramFPGAs" entry point is not found in the Dll "Imaq.dll.

  LabVIEW start racing without problem, only this message at windows start is boring.

  someone has an idea to solve the problem or at least stop that messagebox

  Thank you

  Hi DRhatje.

  Hello and I hope that your well today. Thanks for your post.

  I think it's a pretty good translation, the error message I thought lie in the below knowledge base article.

  The cause suggested for the error is that the IMAQ.exe is defined (by default) to boot at startup. But if you don't have a capture framer installed on the machine card then we could well see this error. The solution is to delete the exe file of the list on your system. The steps to do this is listed in the link below, but in short.

  Section in the screenshot you sent me, you should be able to select the "selective startup", then go to the "Startup" tab and uncheck the IMAQBoot.exe.
  If this restores the default settings on reboot, it's probably an indicator that your administrator rights on this PC are limited.
  I think that a quick way to check is to go to start > run and type "regedit". It is essentially a more advanced method to handle similar settings, but if you do not have Admin on the PC rights then you would most likely be denied access. In all cases, ask one of your colleagues in COMPUTING to use their passwords and change this setting. It will get rid of this warning you are seeing until you start to use our materials of industrial Vision and need to reactivate it.

  Make sure you click on 'Apply' before leaving this utility.

  Why do I get "IMAQBoot.exe - Entry Point not found" error when I restart computer?

  http://digital.NI.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument

  This should at least remove the error message when starting upwards.

  Please let me know how you and I hope this helps!

• Windows 7 - get error when you try to install the updates, code 66A

  I have error when I try to install update!  Code 66A. What should I do?

  
  

  * original title - I have error when I try to install update! Code 66A. What should I do? *

  Framework of 66A
  http://social.answers.Microsoft.com/forums/en/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3

  Step 1

  You can follow the steps below and check if it helps solve the problem of update installation.

  (a) click Start and click on Control Panel.

  (b) go to programs and features.

  (c) scroll down to Microsoft.Net Framework 4 Client Profile, do a right click.

  (d) it will give you a choice of uninstall/change, click it.

  (e) then it will give a choice to repair, choose repair. It will take 4 to 10 minutes to fix and may vary.

  (f) one when you're done, go to your update and Update Center again.

  Step 2

  If the steps above do not help, access the link below and follow the steps described in the article and try to uninstall all versions of the .NET Framework on the computer and reinstall all the versions of the .NET Framework on the computer.http://support.microsoft.com/kb/923100

  Check this reminder in the well: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a
  Diana D. (Microsoft Support) credit releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• ODI-26174 error when try to turn the Table in the model

  Hello

  I got a strange error when I try to turn the table in the model.

  I created the new user (with subsidies), I created the new physics and logic diagram.

  I created new model also. When I try to reverse table I ODI-26174 database connection is not available error

  I tried to measure option using RKM reverse .it. But why it has not been reversed by using option Standart?

  ava.sql.SQLException: i/o error: the network adapter could not establish the connection

  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)

  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)

  at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter.getConnection(OnConnectOnDisconnectDataSourceAdapter.java:74)

  at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1128)

  Any Solution for this?

  Concerning

  AETL

  Hi aetl,.

  If you open the database server in the physical topology and click 'test connection', is it effective?

  If this isn't the case, you must set your connection details, maybe check that the tnsnames.ora is correct and that the network access is ok (including firewalls,...). You can try a tnsping on your database.

  Kind regards

  JeromeFr