Remote access to the apex applications

Similar Questions

• Copy the APEX Application

  Hello people:

  Oracle Database 11 g Express Edition version 11.2

  Request Express 4.0.2.00.08

  I have a question for you.  I developed a simple application for a Department within my organisation:

  8 pages (no application process, process page 12)

  2 triggers

  2 sequences

  2 tables

  Other departments within my body as the application so they would like their own "copy".  Because of the type of information entered in the application, I can't have all the applications use 1 (of course I can but I need to create a somewhat complex authorisation schemes and I'd rather not go that route);

  
  

  Now, finally the question:

  
  

  Is there a way to the APEX to copy an application and recreate all the components (table, triggers, etc) from the new table names?  APEX makes it definitely easy to make a copy of an application, but I then go through the copy with a fine comb to change all references to the old names of table and replace it with new table names.

  
  

  Suggestions?  Comments?  I thank all members of this community of Oracle, because you communicate knowledge where it is lacking...  

  AquaNX4 wrote:

  People of day:

  Oracle Database 11 g Express Edition version 11.2

  Request Express 4.0.2.00.08

  I have a question for you.  I developed a simple application for a Department within my organisation:

  8 pages (no application process, process page 12)

  2 triggers

  2 sequences

  2 tables

  Other departments within my body as the application so they would like their own "copy".  Because of the type of information entered in the application, I can't have all the applications use 1 (of course I can but I need to create a somewhat complex authorisation schemes and I'd rather not go that route);

  Now, finally the question:

  Alas, I fear, that's the wrong question.

  Is there a way to the APEX to copy an application and recreate all the components (table, triggers, etc) from the new table names?  APEX makes it definitely easy to make a copy of an application, but I then go through the copy with a fine comb to change all references to the old names of table and replace it with new table names.

  Any suggestions?  Comments?  I appreciate everyone in this community of Oracle, as share you information where it is lacking...

  If it becomes a business tier application, it must be generated using the level technology company, such as the authorisation schemes, VPD to the multi-tenant data to be stored in the same tables and sturdy PL/SQL API for the maintenance of the data rather than the process Assistant APEX.

  Authorisation schemes are of no use in restricting access to the data, they are used to control access to the APEX application components. You can use authorization to control if a user sees a report from the region, but not the rows that are displayed in the report. To do this you must use VPD or views (note that separate sets of tables are not even considered an option).

  If all departments use, how long before that some top-level executive wants to have access to the data for each of them? How easy it will be to predict that, when the data is distributed on several tables?

  That said, SPV is not available in the XE, and the fact that you use it means that you are unlikely to be able to switch to Enterprise Edition to get it.

  My recommendation would be to rebuild the application using a set of tables, the views that restrict access to data by the Department and the generation of reports and PL/SQL with API packages manage data.

• AppPortal error: remote access to the server is not enabled

  I'm lost on this one.

  Using the full client of AppPortal on a Win7 64 bit machine (version 8.0 of the customer)

  Double-click the icon, download authenticated - published applications show, then double click a published application, the end user receives:

  Remote access to the server is not enabled.

  This happens only on a single computer

  From this profile of users on the given computer I can MSTSC on the same server without problem

  The error also follows the profiles on the given computer.

  I have closed the Antivirus and Windows Firewall and still can not get this to work.

  Even uninstalled and reinstalled the client.

  From my computer, I can easily log in as this user.

  Customers get automatically configured through an XML file.

  After installation, I tested this laptop and he always gave the same error.

  I ended up him to give me the phone for a few hours.

  Uninstalled the version that was there (build 8.0.0.forget) and scoured the Windows Explorer for all left overs (a little here and there in user profiles and delete).

  Then scoured the registry for expressions; vWorkspace, Quest Software and Provision Networks and remove all instances

  Reinstalled all THE SUCCESS with the new connector to our servers (8.0.306.1427)

  Thanks for the help Dave

• User access to the Apex

  Dear all,
  
  What is the 'user access' in the Apex. When I type:
  
  Select the username of all_users;
  
  I do not see users that I created at the Apex (I use Oracle XE). What I need is:
  
  I have a table by its name of 'Agents' and I need to let each officer sees its files only without displaying the records of others.
  
  Maybe have a look at this picture you would understand my request.
  
  [Click here to see the image | http://www.9m.com/upfiles/XLr36804.jpg]
  
  Thanks in advance.

  I need to let each officer sees its files only without displaying the records of others

  In the agents table how do you store the user details (of the apex user who packed / "holds" the record)? In other words how can a record to identify the user, can you have a column where you insert these data, do you establish this apex or use a trigger?

• If you do not have such a column add a first

  ALTER table add Agents (record_owner VARCHAR2 (100))

• When you insert records into this table, set this column with v ('APP_USER') as a trigger or directly from the PLSQL process.

• Then change the report query to filter the records owned by this user

  Select * agents where record_owner =: APP_USER.

• No remote access to the admin page local account mynetgear

  I used happily log into my RN10200 remote and access to everything, including the local administration page. Who has been using ReadyCloud, i.e. before the access of the Web page without hope we get using mynetgear. Page Web tells me that it is no longer accessible on the same network?

  It's pretty useless, because I want to manage my remote NAS box as well!

  

  I want my access admin back please!

  I would add that I always get very happy fully my ReadyNAS Duo ReadyNAS Remote, even the admin page via. This makes me wonder why I got a downgrade from my accessibility on a new product?

  The images worked and I saw them, they just had not been approved yet (just fixed).

  Have you tried to download the ReadyCLOUD application using a different web browser?

• Routing and remote access to the Server 2003

  I configured the remote access and routing service in my Server 2003 duly NAT enabled. All my clients are not in the field. All use internet and intranet connection using my proxy authentication provided by the administrator of the proxy server. I would like to restrict the clients except intranet connection. How to limit the customer?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Static IP remote access for the media center

  I NMH410 work through a WRT610N router.   My ports are configured for static IP access.  Seems to just going through www.ciscomediahub.com does not work well for me.

  Can someone provide the 'exact' URL I would enter in order to access my media center?

  Documentation of assistance through Cisco shows: https://Wan_IP_Address but that doesn't seem to work.  The demand is just there and finally once outside.

  To everyone:

  Apparently, I discovered and corrected the problem that I had with 'Remote access' to my Media Hub.

  Somehow, there are two configurations of router that had to be done.  On two port forwarding configurations has been necessary and once allowed me to access the media center.

  It seems that my ISP has a 192.168.x.x address router that was different from the address of my router 192.168.x.x.  It is on the home router when I incoming and make changes to the information of port forwarding.  The fact that I was getting an error message indicating that I wasn't even reached my router alerted me to the fact that my ISP was blocking remote access.  In the end, that's where my problem was discovered.

  Translate:

  If you have problems to access your media "at a distance" pole through its IP address (and not by the cisco media center), make sure that you configure the ports of the router specified by your Internet provider address, as well as the ports of the router that you have on your network home.

  I have forwarded port 443 on the two addresses of router port, and I can now access my media hub remotely.  Now if I can't play videos remotely, I'll be set.  This leads to another problem that I'll send it in another thread.

  Thanks for the help and suggestions of each.

• Remote access via the internet between Windows 7 PCs and a Windows 7 Pro and a Windows PC Vista Home

  I am running Windows 7 Professional on a laptop Dell Studio 1569 (64-bit). I want remote access to one Dell Inspiron, Windows 7 family, but also an another Dell Inspiron running Windows Vista Home edition, via an IP connection over the internet. I can do this and if so, how? I used GoToMeeting.com, but I hope that I can avoid paying their connecting directly. Thanks in advance.

  Take a look at TeamViewer. Boulder computer Maven

• Remote access to the site to site VPN

  We currently have a VPN site-to-site set up on a direct line between our two data centers. Hosts on site one can speak to guests at site B, and talk to the hosts to site A to site B guests.

  I've recently implemented a site A. VPN VPN remote access clients can access all of the resources behind the ASA at A site without problem. However, strange things happen when they try to contact the site B.

  I have set up corresponding exemptions of NAT on each side of the connection. The remote site reported no abnormalities. When you attempt to connect to a remote VPN client to site B, the only errors that appear are on the SAA to site A. When a remote client attempts to connect to a host at site B, the following errors appear in the log:

  % ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

  I have the exemption following NAT set up on site A:

  access-list sheep; 3 items

  access-list 1 permit line sheep extended ip 10.1.0.0 255.255.0.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

  allowed to Access-list sheep lengthened 2 ip line 10.1.0.0 255.255.0.0 10.3.0.0 255.255.255.0 (hitcnt = 0)

  allowed to Access-list sheep line 3 extended ip 10.3.0.0 255.255.255.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

  I work on it for a few days now and hesitate to open a ticket of TAC. I've seen a few similar questions on the forums, but have found zero with a working solution. I tried to follow the technical notes on Cisco's Web site for a configuration similar to, but had no luck.

  Also, I enabled same-security-traffic on intra and inter-interface interface.

  Any help would be appreciated.

  HUB of the ASA, is this your topology? If so try below suggestions.

  Inside 10.1.1.0/16 Net

  Net 172.16.0.0/28 - net through Tunnel L2L 10.0.0.0/16 end DS3

  VPN RA Net 10.3.0.0/24

  To RA to access the L2L tunnel end hosting you will need to exempt sheep rule applied to the ds3 interface.

  based on the journal

  % ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

  Try this

  no scope list ip 10.3.0.0 access test allow 255.255.255.0 10.0.0.0 255.255.0.0

  test the ip 10.0.0.0 allowed extended access list 255.255.0.0 10.3.0.0 255.255.255.0

  test access list 0 Tan (ds3)

  on the end of the tunnel (spoke), to allow the network of RA from the FOCUS of the ASA in the interesting traffic.

  Let us know how it works

  Concerning

• Lost remote access to the internal network after upgarding PIX to 7.0

  I improved our box of PIX 515E Cisco to release 6.3 7.0 (5) and lost connectivity outside of the internal servers through a VPN connection. Any ideas as to why or how this happened?

  If you use the split tunneling, this is probably the question.

  Is the bug id: CSCeh69389

  This Bug says:

  When you upgrade a PIX 6.x to 7.0, if split tunneling is underway

  used for remote access clients, then the conversion of config

  process will not convert the list of split tunnel command, because

  the ACL of splitting 6.x tunnel was allowed to be of type 'expanded '.

  whereas in 7.0 the ACL must be ' standard '.

  To solve the problem, take the extended ACL and manually convert it to a

  Standard ACL, specifying the networks you want encrypted. Times

  the new ACL is in the config, it must be applied under the

  Group Policy.

  EX:

  SplitTunnel list standard access allowed 10.1.1.0 255.255.255.0

  internal RemoteAccess group strategy

  Group Policy attributes RemoteAccess

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list SplitTunnel

• Export the apex application

  Hi Experts,
  
  I use apex 4.1.
  
  I created my apex application and I added the number of images that are customized to the apex [through the shared components] pages. Now I want this request to the export and import of a different workspace that is in another server. How can I easily export and import these custom images?
  
  Really grateful if someone can help me on this.
  Thank you
  Kuru.

  Hello

  Create the script of installation of files to your workspace
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21674/deployment.htm#CHDIEGCF

  Kind regards
  Jari

• as to the existence of a column added in the apex application database.

  Hello
  
  I created a table-based report apex application. Consider the table as Employee_details
  
  The columns in the Employee_details tables are
  
  *) Employe_id
  name *)
  ip_address *)
  host_name *)
  *) port_no
  *) sys_type
  *) email_id
  login_id *)
  *) sys_config
  *) sys_serial_no
  *) place_allotted
  *) internet_status
  
  and also I created an application that uses this column... Now, I need to add an additional column 'contact_no' in reference to the table...
  
  Only as I added in the table by giving 'Add a column' column is added to the table...
  
  But I need to add this additional 'contact_no' column in my current application as well as the columns existed.
  
  I went to 'Actions' in the application that I created and I went this column 'contact_no' of ' not displayed side on the side of the screen. Now it's displaying.
  
  But the problem where I did here is, when I'm logged into the application and I have once again connecting to the application of the "contact_ no" column which I added for display in the display field does not appear... Why?...
  
  Kind regards
  
  Hari R

  Hello

  If it's a table column then its best to add it to the IR by changing the IR report query.

  If you add through the Action button, and then you save the report as the default setting for him to keep appearing the next time you visit the page.

  Concerning

• window to another page in the apex application number

  Hello
  
  In my apex application, I created a pop up pointing to another page in the application.
  
  Authentication is not passed correctly, i.e. I am being prompted to sign again the application.
  
  Can some help me create a hyperlink for authentication?
  
  Window.Open ("http://optmsdevapex01.cswg.com:7777 / pls/apex/f?") ' p = 174:2: ","mywindow",
  "width = 350, height = 500');"

  f? p = 174:2: & SESSION.

  would do the job.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Instruments GPIB remote access through the GPIBConf device names

  Hello

  I am trying to run the Labwindows 2009 SP1 code on a PC based office while trying to exploit the GPIB instruments

  on another part of the network.

  Normally, this isn't problem with VISA server on the target computer and the use of names of Alias VISA within the

  Office PC code.

  But this code was inherited and uses a different method which has been the best over time.

  The code uses device name strings that have been defined using the GPIB utility: GpibConfig.exe,.

  on the target computer. So when a device is first initialized, the name defined in the GPIB utility is used

  by the code and the associate instrument access are reached. It works fine when the code and

  the instruments are located on the same PC.

  My question: is there some way I can use VISA access server remote GPIB instruments help

  defined names on the computer target with the GpibConfig.exe utility?

  Thank you

  Gary.

  The low-level GPIB functions have no knowledge functions VISA or aliases. This must be a very old application since the VISA has been around for 10 years. Have you always the source code so you can change your GPIB for VISA?

• EA2700 and remote access to the DVR

  Does anyone have a solution for the router settings allow access remotely
  Recorders digital windows and Linux?

  Justme2012 wrote:
  OK, so now I activated Remoting but the remote routers
  Management port is different from the default port on the DVR.

  The ports must be different. In this way it will not create a conflict. No two devices must use the same port numbers. Once again as what has been mentioned in this thread, you must use the port number provided by the manufacturer for the DVR and just leave the router uses it is default remote management port. This is to ensure that there will be no conflict. To check if the ports were opened successfully you can do an audit of port. You can use this site to check it out. http://ping.EU/port-chk/