Remote Desktop does not list my printer

Similar Questions

• Remote Desktop does not see HP 8500

  My remote desktop does not see my new HP Officejet Pro 8500.  He's always seen my printers in the past, including my HP Officejet Pro 7600 on Windows 7.  I can't understand what setting I have to miss.

  Finally, I figured out, and I'll post it in case anyone else needs help.  MY remote desktop is accessible via the Terminal Server (Windows 2003 Server) services.  the driver must be loaded on the server is available with this link:

  OJP8500vA909_corporate_12_en.exe

  After you have installed the driver on the server, install the printer through "add a printer", local option and uncheck "auto detect."   Find the driver on the list, and then install the printer.  Then you should be able to see it on the server.

  If you then install it on a remote desktop (through the Terminal Server services), download the driver 8500 on remote desktop, install the driver on the desktop through "add a printer".   Right click on the printer on the "printers and faxes" screen and view properties.  Go to "ports" and find a port that communicates with your printer.

  IT seems that a special driver must be installed on the server, and then the standard printer driver must be installed on the remote desktop.

• Remote Desktop does not work since MacOS Sierra update

  Unable to connect with Remote Desktop or cord that worked before update

  Greetings geoffshop,

  Thank you for using communities of Apple Support. It seems you want to use under macOS Sierra remote desktop, but it does not work.
  I recommend you read this article, it has the settings you want to check to make sure that it is able to work.
  

  macOS Sierra: allow remote desktop to access your computer

  Take care.

• Remote Desktop does not connect Win 7 on Win XP pro.

  The two turned on, remote active and available on the same network. I tried to connect by the name and Ip address, but I still get the error message. Remote Desktop cannot connect to one of these reasons: 1 remote control, access to the server is not activated 2 remote computer is disabled 3 remote computer is not available on the network.   I have connected before. In fact, I went to my computer in a click with the right button on the computer in the access network, it could not connect. He gave me the opportunity to diagnose the problem, so I chose it. The result of the diagnosis was the computer appears to be correctly configured but (computer) does not. I recently, during the last week, the object a new copy of windows xp pro on the computer and I have connected with access to distance since.  Why can't connect now?

  Check your firewall and router, the remote desktop protocol uses port 3389, this port must be opened.

  John

• Microsoft Remote Desktop does not allow users to log on simultaneously

  Original title: problem with Microsoft Remote Desktop not allowing users to log on simultaneously

  I am currently using a MAc to connect to a desktop running windows 7. Recently, when I try to access the computer with Microsoft Remote Desktop it will launch all users on the computer. He was not used to do this, does anyone have an idea what could have caused this and how to fix it?

  Hi Bert,.

  Thanks for posting your query in Microsoft Community Forum.

  The question you posted would be better suited in the TechNet Forums. However, we can refer to the articles below and check if the problem still persists.

  Configure the remote desktop on Windows 7 systems

  Connect to another computer using Remote Desktop connection

  If the problem persists, I recommend posting your query in the TechNet Forums for the best support.

  Hope this information is useful. Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

  Thank you.

• Windows 8 for Windows 10 remote desktop does not

  I have a Windows 10 remote desktop machine I connect often. In this configuration course I am able to open an Office Session remotely with the following platforms:

  1. My phone Windows 8
  2. My Ubuntu (using Remmina) office

  The problem is related to my PC Windows 8.1. I checked the following:

  • Remote connections are allowed on the remote PC
  • The remote PC is allowed to enable any PC to connect
  • The remote PC is turned on

  Ref: http://windows.microsoft.com/en-us/windows/remote-desktop-app-faq#1TC=windows-8

  I also tried to go to:

  HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default

  in the registry to delete the cache would be ins journal as well. I also deleted Default.rpd in My Documents as well.

  Problem:

  When I try to connect to the Windows 10 computer, the connection is established, but the connection is not accepted (keep in mind, I used this access using RDP connection on my Windows Phone and my PC Ubuntu). For some reason it does not accept my password.

  Any ideas?

  Hi quids,

  Thank you very much to be part of Windows.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en/category/w8itpro

  Back to us for any issues in the future. We will be happy to help you.

• Maximize the remote desktop does not

  When I restore a session extended full-screen remote desktop now, he will not return to full screen.  Please see this screen cast.

  http://www.screencast.com/users/MD_NASP_Per/folders/Jing/media/4ed11777-f6c8-4019-a1d9-b02ad4a4dcb0

  The work around is to edit the default.rdp with a text editor and set "screen mode id: i: 0. »

  Anyone else having this problem?

  Best regards, Mike DePouw

  Hey Mike,

  Try these 2 methods to get the full screen working in Windows 7.

  Method 1:

  a. start "Remote Desktop connection".

  b. click 'Options '.

  c. click on the "View" tab

  d. on "Display Configuration" settings, you can change the display of "Remote Desktop connection" by moving the slider of "small to large.

  e. moving the "slider" all the way to large, the display settings will automatically set in 'full screen '.

  Method 2:

  Use CTRL-ALT & Break to return to the screen in full-screen.

  For more information about the remote desktop connection it see below section of Windows Help.
   
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Remote Desktop does not work after trying to use it to connect outside my home network.

  original title: Trouble with Remote Desktop

  Remote Destop worked very well with my desktop (Win 7 Pro) laptop (Win7 home prem) and then I tried to configure RD off-grid and now even can't do within the home group.  Port 3389 is open, I checked. It also goes further than "Remote configuration connection" and then expires.

  Is there a way to reset by default? If not, what are the default settings in Advanced Options?

  Can't believe how difficult it is.

  Well, a test of telnet with success from the RDC client to a host DRC looks like this. An empty window telnet with a blinking cursor.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RDCSuccessfulTelnetTest.PNG

  A fruitless of telnet test looks like this. You get a can't connect message.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RDCUnsuccessfulTelnetTest.PNG

  Based on the fact that PortQryUI reports that the DRC host is listening on TCP Port 3389, it seems to me that something on this machine is blocking incoming RDC connections if I read your log file.

  You have run PortQryUI on the RDC client on your local network? Which will probably appear the same as the telnet test. Here is an example of a successful test of a DRC DRC host test client.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/PortQryUI-RDCclientExample.PNG

  You run any third-party anti-virus/malware software?

  You run a VPN client as a customer of Cisco for example? I've seen reports in the past of the clients VPN Cisco blocks requests from the DRC.

  FWIW, you can take screenshots with Windows 7 built-in Snipping Tool and then publish them on SkyDrive and post links on the screenshots. Its easier than trying to browse a lot of ascii text... MY HUMBLE OPINION...

• Remote Desktop does not recognize Windows Phone

  I develop for WP8 using Windows 8.1 that I connect remotely. I want to run apps on a telephone connected to the local computer, but the remote computer cannot see the local phone connected by USB even when I put the local resources / other supported Plug n play devices. In fact, I have enabled each checkbox, but still do not see the local Windows Phone. I can access key USB connected to the local computer but only because they are listed with the drive letters. Other devices do not appear. Can anything actually with RDP, so I can access local equipment?

  Hi John,.

  Welcome to the Microsoft Community Forum.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forum. It is better you post the same query in the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  TechNet community

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• For MS WIndows server 2008 Remote Desktop does not work.

  Hello

  We have the following.

  1 VMware 5.5 Vsphare

  2 virtual MACHINE working with MS Windows 2008 ent.

  3 SAP on this server load balancing.

  4. his joints to a domain

  Now, we have enabled RDP and used a user can access to hold off.

  but when we take RDP and entered the IP address on the server mentioned above. It gives the error that the RDP is not activated.

  What we did...

  1 checked any local policy or domain... no problem

  2. check that the RDP port is listened to... no problem

  3. has changed the port 3389... nothing happened.

  4. check for any firewall issue... Order the Windows Firewall... Still nothing...

  Checked port 3389 with telnet... its not going is not to...

  Help, please...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Remote Desktop does not work after the recent update to VMWare Player, why?

  I have VMWare Player installed on a host with multiple virtual machines. I like to the DRC to the remote host and I've been in months, but in the recent update to VMWare Player, my connection to the DRC has dropped. Now when I try to the DRC to the host it hangs at "Estimate the quality connection" after I get my user name and password, but then it stops without errors or messages. I've updated the host and rebooted several times, I also tried to DRC from a computer on the same local network as the host with no result. I have a friends in exactly the same problem, connection dropped in the middle of the update and no resolution yet. Help?

  I uninstalled VMWare Player and did a clean install (rather than updating an earlier version) and the problem is solved!

• I have the driver for my printer but when I run the wizard the drop down of printers who does not understand my printer HP deskjet 9650.

  original title: printer drivers
  I have the driver for my printer but when I run the wizard tells me I need us the built in xp Printer Wizard to install the printer on this operating system. When I go to do this, it gives a fall to the bottom of the printers who does not understand my printer HP deskjet 9650.

  Is there a way do not use the Printer Wizard because I have the right driver. Only, it is not listed through the wizard.

  Hi michelledumont,

  Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  For reference:

  How to install a printer driver locally for a remote printer in Windows XP

• HP Envy 27: Printer does not finish the print job

  Computer is HP Envy 27. Have a for printer HP Officejet Pro 8600 wireless connection. Have old ACER desktop also wireless to the same printer. Print jobs larger than 3 pages, the old ACER works very well, but envy does not. The printer stops after only 3 or 4 or 5 printed pages. Sometimes I hear a small beep in the printer when the printer stops printing. Also the desire does not eliminate the queue when the print job is finished. Entered in the configuration advanced on the computer for printing options and checked to see if that option (not playoff jobs in queue) has been verified. It was not the case. So I don't know why it is keeping the job in the queue. When we first got the urge last year, he had the printing problem, although she probably had the problem of the queue.

  Hello autumnperson1,

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• HP officejet 6600 my laptop does not recognize the printer

  My laptop does not recognize the printer any longer. It will recognize the fax on the printer but not the printer itself. Can you help me? I have two currencies on my laptop. HP officejet 6600 and hp officejet 6600 network. Even printing for both. One network is the fax. I'm not clear what is the question. I can't even download drivers or updates for it.

  There are two 6600's in the list, a fax and a printer, because the full feature software and drivers have drivers for both. If you do not use the fax, you can remove devices and printers.

  A work print from other sources? For example Notepad?