Remote Desktop. Why the differences?

Similar Questions

• Foxfire flies from site to site, but the links open very slowly in my e-mail program. Why the difference?

  Foxfire when open, flies from site to site, but when I click on a link in my email, even if Foxfire is open, it is very very slow to react, aggravatingly Yes. Why the difference?

  What part solved the problem?

  Was it places.sqlite?

  In this case he may have had a problem with history.

• Remote Desktop left the unlocked console session after I disconnect, - BAD!

  Often, I connect to my Home PC, Windows XP Pro SP3 running to work.  When I leave the House, the session is locked.

  I recently discovered that when I disconnect from a remote desktop session, the computer is left * unlocked * even if I disconnect the session by locking the PC.

  I'm fairly certain that it wasn't how things behave initially.  This change with SP3?

  Currently, I connect to work with a Windows 7 Pro (64 bit) machine, but there is this problem with my old laptop which ran from XP Pro SP3.

  How can I stay locked to disconnect the console session?

  END THE SESSION IS NOT AN OPTION.  I have user programs that run in the session that must continue to run. I have need of the session is running, but locked.

  Hello

  In my case it was the full client of Teamviewer which is a problem, including a version earlier than 5.1.9385, when I upgraded to this one, the problem disappeared!

  Now there's another question that should be checked, if you Live Mesh Beta (which runs on windows XP and not a new one which has no Vista/7), then there are chances that you have activated the Remote Desktop feature, you can find two devices under the 'View' node in the Device Manager named 'Live Mesh curtain Driver' and 'Live Mesh Mirror Driver. You can turn them off, restart and check if the problem persists.

  A last suggestion if the above could not solve the problem is to update the drivers of network card in your machine.

  I hope this helps.

  George Simos

  Microsoft MVP - System Center Configuration Manager

  MCSE 2003, MCTS, ConfigMgr virtualization

• no remote desktop giving the possibility to add users and settings

  OK ive tried to use the remote with about 6 computers desktop and I followed all the steps in the help and support and I watched videos on youtube but there were some settings on the videos and help and suport that I did not have my guess is that the parameters are why I can't use it I'm not sure I'm computer very smart and I'm at school just not of computer programming i can't seem to understand why I don't have the same parameters as the others and used in other places ive remote desktop cant just with my computer any help on why I don't them I will be useful and if there is a way to download a patch for mine that will give me sick options takes I have can get thanks

  Hello

  Thus, Home Basic edition, and Home Premium edition are the same options as Business, Ultimate and Enterprise.

  Basic and Premium "Remote Assistance" and the other three SKUS have full Remote Desktop. This is probably the question you are running in.

  And the experience is different as well. You can however, is located on a computer Home Basic/Premium and connect by using "Remote Desktop" on a computer running Business, Ultimate and Enterprise. But not the other way around. You use Remote Assistance.

  Remote Assistance allows a remote user to connect to your system via an 'Invitation '. You can search in Help and Support for Remote Assistance or Desktop FAQ good explanations.

  Remote Desktop is designed so that you can connect to your computer remotely to work. This does not require an invitaion. Do not add users to a permissions list (essentially to be an Admiistrator or the remote user to group.)

  It was really just a couple of things you need to put in place to communicate with office remotely to another computer... easily anyway.

  (1) you are on the SAME network. Your count gets its IP address from the same server (DHCP) or in the same range of IPS 'assigned manually.

  (2) you are in the same workgroup or domain. If this is not the case, this is complicated.

  (3) you must go into the system properties and allow Remote Assistance (Basic and Premium) and/or business (Business, Ultimate) remote desktop

  An Alternative to Remote Assistance is Windows Live Messenger. It has a nice little feature that allows you to do the same. It requires that a person on the remote computer send an invitation and accept the connection as much as Remote Assistance... a little against the goal... but clean enough little free app to fix someone's computer remotely.

  I hope this helps

  Mark <> Microsoft Partner

• Cannot open the alias "Microsoft Remote Desktop" because the original item cannot be found.

  Running Mac OS 10.11.3. By clicking on "fix Alias... "does not set it. Afraid to click on "Delete the Alias" since I do not know where is the 'original '. I'm not good with computers, so if you have a solution, please explain as I am a child of 5 years. Thank you.

  Where are you clicking when yo get this message?

  First, look in your Applications folder and see if Microsoft Remote Desktop is here.

  Reinstall Microsoft Remote Desktop.

  https://iTunes.Apple.com/us/app/Microsoft-Remote-Desktop/id715768417?MT=12

• Remote Desktop on the Server 2008 r2

  I was able to inside my vpn Remote Desktop connection. I am unable to connect using any PC outside. Windows 2008 firewall is set to allow all incoming connections, my VPN firewall is set to allow port 3389 to enter. I'm lost please help!

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Server Windows 2008 R2 - can you use for a single user remote desktop after the initial 120-day grace period?

  I installed Windows Server 2008 R2.  During the 1st 120 days, remote desktop worked for multiple users.  Now that the 120 days are up, it is necessary to purchase client access licenses.  However, is it possible to activate the remote desktop for one user without having to purchase client access licenses?  If so, I would like to ask for details.  I've been everywhere in the server options and can't seem to find the right combination.  Thank you!

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps.

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• By connecting to a remote desktop at the top of the entire screen except the ip address so dark. Help!

  I use my remote desk top.  After entering the password ect.  It puts me in but the screen is black.  I can see the IP above, but there is no button to start or do anything.  How can I fix this.  Can someone please.

  Thank you

  Sheila

  Hi Sheila,

  You can check the following links and controls if you can solve your problem:

  Troubleshooting specific remote desktop problems

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/70276a19-6972-4f9b-B852-663b0b279df3

  Hope this information is useful.

• Remote Desktop in the network does not work

  First time VPN newbie. I need to set up the vpn for a small company of friends using RV082 so, as a test, I put up here at home using a very basic configuration. The network topology looks like:

  Cloud-online cable modem => RV082-online-online PC win7 DIR655

  On a remote site, I launch QUICKVPN, enter the necessary data and connect. Setting up the Office remotely and put the IP address of my pc at home and the user name to logon and after a minute or two, he says "unable to connect to the computer" (or words to that effect). My home PC has been configured to allow remote desktop connections and this has happened in the past, but not since the installation of RV082. There is nothing in the logs of the PC, or in the newspapers of the RV082. What should be my line of inquiry?

  These products are processed by the Cisco Small Business support community. (URL: https://supportforums.cisco.com/community/netpro/small-business )

• die remote desktop during the VPN connection

  I by office remote access to a server that is connected by the Cisco VPN client to other servers, but when I connect the VPN, the sector of remote desktop, if I have this connection loose and cannot work.

  That's what I should do, but when the VPN connects, my remote desktop connection matrix:

  |***|                                    |***|                     |***|

  |__|  --> Remote Desktop--> | __ |   --> VPN --> |__|

  me server1 server2

  I can't VPN to server2 directly, I have to go through Server1, but I can't.

  Javier,

  When VPN appears on server1, then all traffic get dug in the client [including the remote desktop session].

  ===> You need a split-mining policy which aims to exclude the IP address of your customer

  See you soon,.

• Remote Desktop for the external IP address is no longer works

  Hello and thanks for your help.

  For months I could access my desktop from my laptop (via Remote Desktop) / Tablet (via PocketCloud), both inside and outside my network.

  Recently, the external IP address for my router has changed. As this happened, I was not able to access my desktop to the outside.

  Other possible factors:

  -A had a problem of invalid system disk on my desktop which has been resolved by changing the boot order.

  -J' I registered a domain name, which I redirected to the old IP address. I have since updated the domain to redirect to the new IP address.

  I tried the IP address and the URL (using my domain name) to try and MOP with no luck.

  Any suggestions?

  Thank you

  Hello

  I suggest you post this question in this forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Keeps remote desktop abandon the connection

  Hello

  I have just upgraded to Windows 7 Windows 8. The main question that I have now with Windows 8, it is the remote desktop client is somehow broken for me. Whenever I use it, it blocks (i.e. I can't interact with the remote computer) and then I get the box of Pseudo-dialogue indicating reconnection it will reconnect and I return the remote access. He does it all the time (about every few minutes). Note that when I can't interact with the computer to remove it, I can still ping it very well. Clearly, it is not a connection problem.
  It seems to be a problem with Microsoft Remote Desktop Client because I'm so tired, I tried 2 alternatives: terminals and mRemoteNG. Their use, never removes the connection.
  However, I would like to use the Microsoft client as it is more convenient to use. I tried to copy some binary files from Windows XP or Windows 7, but they do not work properly when I try to run them, I guess it's more than a simple 'mstsc.exe' to copy (I copied c:\windows\system32\mstscax.dll thus, but it kept loading of Windows 8).
  Anyone with a similar problem?
  Thank you
  Manu

  A fix came out 11/13 which appears to solve the problem for me. The number is 2897602.

  http://support.Microsoft.com/kb/2897602

• Base RC - why the difference?

  Hello all,.

  It's a little embarrassing to be posting this question at low altitude, but not knowing the answer that led me to this last resort.  Please forgive me!

  I have an attached parallel rc circuit.  I did all the calculations according to the text (Yes, I'm a beginner) and no matter what, I come up with a different answer for the current compared to multisim 12. I'm guessing that it is such a comprehensive program, the error is due to my ignorance of the parameters, parameters, other formulas and not a simple bug.   I tried this to TINA and TINA response is the same as mine.   So why Multisim is different?  What Miss me?  Help, please.

  I posted two files, a ms12 and a jpg as well.

  Kind regards.

  Hi Bamber,

  I ran some tests with your circuit and the reason why the values are a little off is the used timestep. The time step determines when readings are to be taken. To resolve this issue, go to simulate-> interactive Simulation settings and change the settings, as shown in the screenshot.

  I hope this helps.

• Leaving the Remote Desktop application, the host closes all applications

  I used the wording of another post which did not have a clear answer: Oh yes, XP, Sp3 operating system

  Before you get a new computer at home I could Office remotely from my laptop to my desktop so I could sign out... then later sign in my office and all my programs would still be being run/open. This allowed me to restart or to view the current state of the tasks application...

  Now however I recntly received a newer computer and now when I do a remote session, programs of work great as long as I stay logged in, but, when I discoonect my remote session current in continuing my work in half an hour, everything seems fine. later, I connect to the computer through a remote session. Everything goes well as logins and passwords, but when the desktop applications. I had running before leaving the first time are closed. I checked several different setting and nothing seems to work. Someone at - he heard of this problem and what someone aware of a resolution.

  Thanks for any assistance regarding: my problem

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads