remote site in the site internal Web

Similar Questions

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• Site Web is updated online, but seem to update the remote site pane?

  I use Dreamweaver 8.

  I am updating a website I have created initially.  I did this summer with success, until I did a major synchronization in order to cleanse the body of some really old files and make the site easier to manage for everyone.  Sync seems fine, but got it wrong in the end and ended up with the 'old' mainwebsite file and a mainwebsite file 'new '.  I then synced and it deleted the 'old' main site file (which is what I wanted to do).

  Now, when I do updates and put them on the remote site... they do not appear online.  Update the side "remote" site of the box of files.

  I tried to remove the site and then re - get the whole thing as if I've ever been in, but it is not yet published on the web.

  When I "re-" the site, he came with the old main site file, so I'm not sure what the field is SEO.  The old site file could be hiding somewhere on the FTP?

  Any ideas I could try?

  Sorry if I don't am not worded this correctly, I am new to Dreamweaver and use this site to learn the basics.  Thanks in advance!

  You need to be sure the site definitions are contained properly, if we're wrong, local or remote, you will have problems that you have.

  http://TV.Adobe.com/#VI+f1592v1760 Watch this video for a better explanation I can give.

  Brad Lawryk
  Adobe, Dreamweaver community expert
  Northern British Columbia Adobe User Group, Adobe user group manager

• Internal Web sites, does not not via DNS

  Error
  The requested URL could not be found
  Error: The web filter could not find the address of the requested site

  Why you see this:
  The system is unable to determine the IP address for itserv

  Possible reasons could be:

     The site name has been entered incorrectly or does not exist. Please double check you have entered the correct URL.
     The Domain Name Server (DNS) is unable to resolve the IP address for this domain.
  

  And yet, if I opened my internal website of any other browser, it works without problem. The same goes for my internal IIS Web site and also another internal Web site runs its own web server.
  Any ideas?

  After further investigation by myself yesterday, I solved the problem.
  The above server is on a static IP address, which is then defined as an exception in the system proxy settings. Other browsers are able to realize that the DNS name resolves to an IP address within this range.
  Despite Firefox these automatically get value, it does not have the DNS name of the server that translates an IP address in the range and so just times out.
  As it is definitely a bug with Firefox that needs to be solved, as I said, other browsers are able to resolve the DNS and make adjustments to access the data. Probably I'm not the first to encounter this problem.

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Remote access to the site to site VPN

  We currently have a VPN site-to-site set up on a direct line between our two data centers. Hosts on site one can speak to guests at site B, and talk to the hosts to site A to site B guests.

  I've recently implemented a site A. VPN VPN remote access clients can access all of the resources behind the ASA at A site without problem. However, strange things happen when they try to contact the site B.

  I have set up corresponding exemptions of NAT on each side of the connection. The remote site reported no abnormalities. When you attempt to connect to a remote VPN client to site B, the only errors that appear are on the SAA to site A. When a remote client attempts to connect to a host at site B, the following errors appear in the log:

  % ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

  I have the exemption following NAT set up on site A:

  access-list sheep; 3 items

  access-list 1 permit line sheep extended ip 10.1.0.0 255.255.0.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

  allowed to Access-list sheep lengthened 2 ip line 10.1.0.0 255.255.0.0 10.3.0.0 255.255.255.0 (hitcnt = 0)

  allowed to Access-list sheep line 3 extended ip 10.3.0.0 255.255.255.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

  I work on it for a few days now and hesitate to open a ticket of TAC. I've seen a few similar questions on the forums, but have found zero with a working solution. I tried to follow the technical notes on Cisco's Web site for a configuration similar to, but had no luck.

  Also, I enabled same-security-traffic on intra and inter-interface interface.

  Any help would be appreciated.

  HUB of the ASA, is this your topology? If so try below suggestions.

  Inside 10.1.1.0/16 Net

  Net 172.16.0.0/28 - net through Tunnel L2L 10.0.0.0/16 end DS3

  VPN RA Net 10.3.0.0/24

  To RA to access the L2L tunnel end hosting you will need to exempt sheep rule applied to the ds3 interface.

  based on the journal

  % ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

  Try this

  no scope list ip 10.3.0.0 access test allow 255.255.255.0 10.0.0.0 255.255.0.0

  test the ip 10.0.0.0 allowed extended access list 255.255.0.0 10.3.0.0 255.255.255.0

  test access list 0 Tan (ds3)

  on the end of the tunnel (spoke), to allow the network of RA from the FOCUS of the ASA in the interesting traffic.

  Let us know how it works

  Concerning

• ASA Site, Remote Site cannot access DMZ to the Hub site

  So I've been scratching my head and I just can't visualize what I what and how I want to do.

  Here is the overview of my network:

  Headquarters: ASA 5505

  Site1: ASA 5505

  Site2: ASA 5505

  Training3: ASA 5505

  All Sites are connected L2L to the location of the Headquarters with VPN Site to Site.

  Since the HQ site I can ping each location by satellite, and each satellite location I can ping the HQ site. I will also mention that all other traffic is also correctly.

  Here's my number: HQ site, I have a DMZ set up with a web/mail server. This mail/web server is accessible from my HQ LAN, but not from the satellite location. I need allow that.

  What should I do?

  My second question is that I want for satellite sites to see networks of eachother. I should create a VPN network between sites, or can this be solved in the same way that the question of the DMZ?

  I enclose the show run from my ASA HQ

  See the race HQ ASA

  For the mail/web server that requires access on the remote site VPN tunnels, you must add the servers to the acl crypto, similar to the way you have it for network access. Make sure that both parties have the ACL in mirror. If you're natting from the DMZ to the outside, make sure you create an exemption from nat from the dmz to the outside for VPN traffic.

  For the second question, because you have only three sites, I would recommend creating a tunnel from site to site between two satellite sites.

  HTH

  PS. If you found this post useful, please note it.

• Access to the remote site VPN

  Hello

  I'm trying to solve a problem with the VPN, and I hope that someone could give me a helping hand.

  We have 3 offices, each with an ASA 5505 like the router/firewall, connected to a cable modem

  (NC Office) <----IPSEC----->(office of PA) <----IPSEC----->(TC Office)

  Internally, we have a full mesh VPN, so all offices can talk to each other directly.

  I have people at home, by using remote access VPN into the Office of PA, and I need them to be able to connect to two other offices there.

  I was able to run for the Office of CT, but I can't seem to work for the Office of the NC.  (I want to say is, users can remote access VPN in the PA Office and access resources in the offices of the PA and CT, but they can't get the Office of NC).

  Someone could take a look at these 2 configs and let me know if I'm missing something?  I am newer to this, so some of these configs do not have better naming conventions, but I'm getting there

  PA OFFICE

  Output of the command: "show run".

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname WayneASA

  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 70.91.18.205 255.255.255.252
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS lookup field inside
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  75.75.75.75 server name
  75.75.76.76 server name
  domain 3gtms.com
  permit same-security-traffic intra-interface
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  inside_access_in of access allowed any ip an extended list
  IPSec_Access to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.2.0 255.255.255.0
  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  TunnelSplit1 list standard access allowed 192.168.10.0 255.255.255.224
  TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
  outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  outside_2_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.2.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.5.0 255.255.255.0
  out_access_in list extended access udp allowed any SIP host 70.91.18.205 EQ
  out_access_in list extended access permit tcp any host 70.91.18.205 eq 5000
  out_access_in list extended access permits any udp host 70.91.18.205 range 9000-9049
  out_access_in list extended access permit tcp any host 70.91.18.205 EQ SIP
  out_access_in list extended access allowed object-group TCPUDP any host 70.91.18.205 eq 5090
  out_access_in list extended access permit udp any host 70.91.18.205 eq 5000
  Note to outside-nat0 access-list NAT0 for VPNPool to Remote Sites
  outside-nat0 extended ip 192.168.10.0 access list allow 255.255.255.224 192.168.2.0 255.255.255.0
  outside-nat0 extended ip 192.168.10.0 access list allow 255.255.255.224 192.168.5.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP mask 255.255.255.224 local pool VPNPool 192.168.10.1 - 192.168.10.30
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0
  NAT (inside) 1 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access outside-nat0
  inside_access_in access to the interface inside group
  Access-group out_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 70.91.18.206 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set esp-3des esp-md5-hmac VPNTransformSet
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto IPSec_map 1 corresponds to the address IPSec_Access
  card crypto IPSec_map 1 set peer 50.199.234.229
  card crypto IPSec_map 1 the transform-set VPNTransformSet value
  card crypto IPSec_map 2 corresponds to the address outside_2_cryptomap
  card crypto IPSec_map 2 set pfs Group1
  card crypto IPSec_map 2 set peer 98.101.139.210
  card crypto IPSec_map 2 the transform-set VPNTransformSet value
  card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  IPSec_map interface card crypto outside
  card crypto outside_map 1 match address outside_1_cryptomap
  peer set card crypto outside_map 1 50.199.234.229
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 60
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.100 - 192.168.1.199 inside
  dhcpd dns 75.75.75.75 75.75.76.76 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal RemoteTunnel group strategy
  attributes of Group Policy RemoteTunnel
  value of server DNS 75.75.75.75 75.75.76.76
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RemoteTunnel_splitTunnelAcl_1
  dfavier vUA99P1dT3fvnDZy encrypted password username
  username dfavier attributes
  type of remote access service
  rduske vu0Zdx0n3oZWFSaX encrypted password username
  username rduske attributes
  type of remote access service
  eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
  lestofts URsSXKLozQMSeCBk username encrypted password
  username lestofts attributes
  type of remote access service
  jpwiggins 3WyoRxmI6LZjGHZE encrypted password username
  username jpwiggins attributes
  type of remote access service
  tomleonard cQXk0RJCBtxyzZ4K encrypted password username
  username tomleonard attributes
  type of remote access service
  algobel 4AjIefFXCbu7.T9v encrypted password username
  username algobel attributes
  type of remote access service
  type tunnel-group RemoteTunnel remote access
  attributes global-tunnel-group RemoteTunnel
  address pool VPNPool
  Group Policy - by default-RemoteTunnel
  IPSec-attributes tunnel-group RemoteTunnel
  pre-shared key *.
  tunnel-group 50.199.234.229 type ipsec-l2l
  IPSec-attributes tunnel-group 50.199.234.229
  pre-shared key *.
  tunnel-group 98.101.139.210 type ipsec-l2l
  IPSec-attributes tunnel-group 98.101.139.210
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  inspect the pptp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:6d1ffe8d570d467e1ea6fd60e9457ba1
  : end

  CT OFFICE

  Output of the command: "show run".

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname RaleighASA
  activate the encrypted password of Ml95GJgphVRqpdJ7
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.5.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 98.101.139.210 255.0.0.0
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name 24.25.5.60
  Server name 24.25.5.61
  permit same-security-traffic intra-interface
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  Wayne_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
  Wayne_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
  Shelton_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.2.0 255.255.255.0
  out_access_in list extended access permit tcp any host 98.101.139.210 eq www
  out_access_in list extended access permit tcp any host 98.101.139.210 eq ftp
  out_access_in list extended access permit udp any host 98.101.139.210 eq tftp
  out_access_in list extended access udp allowed any SIP host 98.101.139.210 EQ
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5090
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 2001
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5080
  out_access_in list extended access permit tcp any host 98.101.139.210 eq ssh
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 81
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 56774
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5000
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 902
  out_access_in list extended access permit tcp any host 98.101.139.210 eq netbios-ssn
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 445
  out_access_in list extended access permit tcp any host 98.101.139.210 eq https
  out_access_in list extended access allowed object-group TCPUDP any host 98.101.139.210 eq 3389
  out_access_in list extended access allowed object-group TCPUDP range guest 98.101.139.210 5480 5487
  out_access_in list extended access permits any udp host 98.101.139.210 range 9000-9050
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0
  NAT (inside) 1 0.0.0.0 0.0.0.0

  Access-group out_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 98.101.139.209 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac WayneTransform
  Crypto ipsec transform-set esp-3des esp-md5-hmac SheltonTransform
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto IPSec_map 1 corresponds to the address Wayne_Access
  card crypto IPSec_map 1 set pfs Group1
  card crypto IPSec_map 1 set peer 70.91.18.205
  card crypto IPSec_map 1 the transform-set WayneTransform value
  card crypto IPSec_map 2 corresponds to the address Shelton_Access
  card crypto IPSec_map 2 set pfs Group1
  card crypto IPSec_map 2 set peer 50.199.234.229
  card crypto IPSec_map 2 the transform-set SheltonTransform value
  IPSec_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.5.100 - 192.168.5.199 inside
  dhcpd dns 24.25.5.60 24.25.5.61 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
  tunnel-group 50.199.234.229 type ipsec-l2l
  IPSec-attributes tunnel-group 50.199.234.229
  pre-shared key *.
  tunnel-group 70.91.18.205 type ipsec-l2l
  IPSec-attributes tunnel-group 70.91.18.205
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:3d770ba9647ffdc22b3637e1e5b9a955
  : end

  Hello

  I might have found the problem.

  To be honest, I'm a little tired and concentration is difficult, especially when access between multiple device configurations. So second pair of eyes is perhaps in order.

  At the moment it seems to me that this configuration is the problem on the SITE of PA

  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0

  This is an ACL that defines networks the and remote for a connection VPN L2L.

  Now, when we look at what connection VPN L2L this belong we see the following

  card crypto IPSec_map 1 corresponds to the address IPSec_Access

  card crypto IPSec_map 1 set peer 50.199.234.229

  card crypto IPSec_map 1 the transform-set VPNTransformSet value

  Now, we see that the peer IP address is 50.199.234.229. Is what site this? The IP address of the CT Site that works correctly?

  Now what that said the ACL line I mentioned more early basically is that when the 192.168.10.0 network 255.255.255.224 wants to connect to the network 192.168.5.0/24 should be sent to the CT Site. And of course, this should not be the case as we want traffic to go on the NC Site

  Also worth noting is that on the SITE of the above connection is configured with the '1' priority so it gets first compared a connection. If the VPN L2L configurations were in different order then the VPN Client connection can actually work. But it's just something that I wanted to point out. The actual resolution of the problem, of course, is to detach the configuration which is the cause of the real problem in which ASA attempts to route traffic to a completely wrong place.

  So can you remove this line ACL of the ASA of PA

  No IPSec_Access access list extended ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0

  Then, test the VPN Client connection NC SITE again.

  Hope that this will finally be the solution

  -Jouni

• Access to the DMZ to remote sites via VPN S2S

  We have an ASA 5520 and two remote site ASA 5505 that connect to each other through tunnels VPN S2S. They are doing tunneling split, while local traffic passes over the tunnel. We are local LAN (10.0.0.0/16) and our network to the DMZ (10.3.0.0/24) on the main site. The DMZ hosts our external sharepoint, but we access it internally

  The problem is site A (10.1.0.0/24) and B (10.2.0.0/24) have no idea of it, and when you try to go to the site, it fails. You can access it via the external site address, but that's the only way. Normally the external address is blocked when you're an intern.

  That I'm stuck on is even when we had all sent traffic from Site A to our Senior Center, would find it yet. I do a separate vpn purely tunnel that traffic to DMZ?

  Yes. So if you do this in ASDM under Edit Site profile connection Site, it will look like this.

  Local network: 10.0.0/16, 10.3.0.0/24

  Distance: 10.1.0.0/24

• Why can't I preview the changes before putting them live on the remote site in a browser?

  Help, please! I have inherited a website for editing and can't seem to get a preview of my changes without them going to live first. When I click on 'Live', the program hangs and I have to reopen. When I click on 'Preview in browser' he asks me to save the file or not and puts them on the remote site as well. I'm not particularly web savvy and learn on the way. I use CS6 on a Macbook OS X Yosemite.

  Your test server (Mamp) works?  If this isn't the case, you must start it.

  Nancy O.

• How can I search for terms in Dreamweaver on my remote side not only local folders Web site?

  I'm trying to search for terms on my website in Dreamweaver. When I use the button "Find and replace", it seems fair to search only the local files folder. Is it possible to have the focus of the research on the remote side of the Web site, instead of just the local side?

  Not with Dreamweaver.

  You can use the function search (Ctrl + F) in your web browser. But it will not replace the terms found.

  Nancy O.

• Remote site will not show the local updates although CS5 says they are successful?

  Hi, local changes I save and put it in Dreamweaver are not displayed on my site online. My server connection works, Dreamweaver says they are successful, the changes appear when I preview them in Dreamweaver, I tried both update a single page and throughout the site, and I tried to transfer files manually using FileZilla. No idea how I can get my remote site to update?

  Using CS5, using SFTP (host site says to use SFTP), OS is Windows 7, using GoDaddy to get a custom url that redirects to a different host site.

  Are you sure you are uploading to the correct location?

  I've seen it happen where people accidentally put up their site in DW with an additional and unnecessary directory level. Uusually called htdocs, bands or public thought they need to duplicate the folder root of the web server. When they try to download in their folder root on the server the additional directory is copied on as well, so instead of finding your page to...

  www.yoursite.com/index.html

  He's going to...

  www.yoursite.com/public (or htdocs or webs) / index.html

  EDIT: The fact that DW and Filezilla are apparently download but page is in some sort not updating could also be a cache problem simple browser. Clear the cache of your browser and see if updates made.

• How do I change the site settings so I can work on the local computer, not remote site

  I have to work on a Web site that was initially set up for 'work on remote site (not recommended)'.

  I did a redesign of the site on mylocal computer because I could not go live until I approved it.

  How can I combine the old and new sites? I had to use an external ftp program to upload the new files and replace the index page. It all works very well online, but I wish I could put small changes directly from Dreamweaver. So far I can one of my new files put on the remote site through Dreamweaver.

  If you have the site files on your local computer, simply create a new definition of site in the normal way. Then delete the old site definition.

  A Dreamweaver site definition simply controls how to communicate with the remote server. Deleting a site definition deletes the definition. It has no effect on local files.

• Download at remote site for the 1st time

  What whatsoever to the next line, before you put the page online at the remote site, please?
  
  <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN".
  " http://www.w3.org/TR/html4/loose.dtd" >

  NO.

  --
  Bryan Ashcraft (remove the BRAIN to respond)
  Web application developer
  Wright Medical Technology, Inc.
  -------------------------------------------------------------------------
  Macromedia Dreamweaver Developer certified
  Adobe Community Expert (DW): http://www.adobe.com/communities/experts/

  "Karlhevera" wrote in message
  News:fnvosu$GT1$1@forums. Macromedia.com...
  > To do anything at the next line, before loading the page for
  > the
  > distance from the site, please?
  >
  > > " http://www.w3.org/TR/html4/loose.dtd" >
  >

• How to check if the link exists in the remote site

  Hi all:
  
  Guys please can you me if there is a way I can check if the link exists in the remote site? for example
  
  < cfif hyper link to www.mysite.com exists in www.remotesite.com >
  good... We will continue
  < cfelse >
  Please add link to www.mysite.com before continuing
  < / cfif >
  
  Is this possible... you have to use the spider? If yes how?
  
  Thanks guys,.
  A
  

  to develop the excellent suggestion of tclaremont:

  You can use refindnocase() to search the returned by cfhttp filecontent
  call us at:

  http://www.yourwebsite.com">
  method http://www.VisitorsPage' = 'GET' result = 'Foobar '.
  ResolveUrl = "yes" getasbinary = "auto" >
  <>
  foobar. StatusCode is "200 OK" >
  ] * href [^ >] *' & replace (myurl, '. ',' \.',)
  'all') & '[^>]*>(.*?) <\>', Foobar.filecontent) >
  link
  
  no link...
  
  
  ... connection error or the web page you requested does not exist...
  

  of course, if the www.VisitorsPage site is sneaky and has the link to
  your site code page, but hide it with css/javascript, it's going to
  be difficult to discover using regexp... better just go and watch their
  Web site...

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com/