Removal of access of users after hours

Similar Questions

• Removable storage access is denied

  Hello world

  Before my question, I'm not 100% sure that it is related to Windows 7 or Windows Server. Please let me know if I'm wrong.

  A few weeks ago I had to block access to all classes of removable storage to a group of 5 users or more in the company. So I used the "Computer Configuration" GPO (Computer Configuration > administrative templates > system > removable storage access > classes all removable storage: deny access for all 'Active'.) I applied it to the users, and it worked fine. From there, they were able to use the key USB, CD, etc... After awhile, it was decided by the administration they could get access to rear. So I removed the GPO of these users. After some time, users are complaining that access was denied again. From there on, here's my resolve the path

  • I did a GPRESULT and I could see that the GPO has been applied.
  • I looked to the top of local computer policy (gpedit.msc) and this setting is not configured
  • I looked upward in the event viewer in the computers and the domain controller, nothing interesting found
  • I tried to make a GPUPDATE/force and restart
  • I tried to remove the computer from the Active Directory and join it back to the field
  • The GPO still exists, but not applied to users having the problem, I tried with 2 computers of third parties to reproduce the problem. I applied the GPO, denied access to all removable storage classes. I délettrée the GPO and access to all removable storage classes to restore.

  At this point, I don't know what to do. It has been a little hours (days) now that I searched on the internet about this problem and the only user I found that solved this problem, solved by formatting computers upward... This isn't the solution, I want to use.

  Please note that these users are in a connected remote site MPLS to the main site and there is a DC in each site and also the replication works very well.

  Best regards

  Mike

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Receive the error on the logging message indicating "problem accessing your user profile.

  I get an error message from the log indicating that there 'a problem accessing your user profile '. About a week or two ago I called Microsoft and Security Support technician run my laptop in safe mode to remove a virus preventing me access to the internet. This problem has been resolved. I have not used my laptop again since then until today.

  See if this helps:

  ·

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot access c:\users\username\appdata\roaming\microsoft\windows

  I am running windows 7 and is struggling to access c:\users\username\appdata\roaming\microsoft\windows

  I have all my permissions, but I can't see that folder

  When I go to c:\users\username\appdata\roaming\microsoft\ and try to create the windows folder, it says it already exists, but I don't see it in the folder.

  I have all the correct settings on the Security tab and is the owner

  my desktop background is black and I can not install programs like Skype

  How can I fix? I spend a few hours Googling and couldn't find an answer. it told me to change the security settings, but I double and triple checked all permissions are allowed.

  Hello

  Please keep us updated on the issue.

  Method 1

  Connect to the new user account and try to copy the data from the old user account.

  1. click on the start menu, and then click computer.

  2. click the button hold in the upper left corner and choose Folder Options.

  3. on the view tab, check "Show the hidden files and folders" and click OK to save the settings.

  4. navigate to the folder C:\Users\(old user name).

  Note: I guess that Windows 7 is installed on the C: partition.

  ((5 copy all the files and folders in the C:\Users\(old folder user name) in the folder C:\Users\(new user name).

  Note: To copy all of the files, we can press Ctrl + A, then Ctrl + C in the folder C:\Users\(old user name). After that, go to the folder C:\Users\(new user name), click Ctrl + V.

  Method 2

  1. right click on the file or folder, click Properties, and then click the Security tab.

  2. click on advanced and then click the owner tab.

  3. click on edit and then do one of the following:

  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  4. If you want to take ownership of the contents of the folder, select the replace the owner of sub containers and objects check box.

  5. click OK and then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.

  Note folder_name is the name of the folder you want to take charge.

  6. click on OK and then reapply the permissions and security settings that you want for the folder and its contents.

  Additional information:

  "Access denied" or other errors in the access to or work with files and folders in Windows

  http://support.Microsoft.com/kb/2623670/en-us#method12

  File and folder permissions

  http://TechNet.Microsoft.com/en-us/library/bb727008.aspx

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Remove the log-in user

  We have two users on one single computer, two separate log-ins, how can I remove one of the users, all have two access it administration.

  This article describes how to add and remove accounts:

  "How to create and configure user accounts in Windows XP"
    <>http://support.Microsoft.com/kb/279783 >

  HTH,
  JW

• How can I access my emails after the death of my PC. I had a pc using Windows Vista and I served my Windows Mail e-mail program.

  Disaster of Windows Mail.  Where are my emails please?

  How can I access my emails after the death of my PC. I had a pc using Windows Vista and I served my Windows Mail e-mail program.  The computer has stopped working so I removed the hard drive, put it in a case and now use it as an external drive.  My new computer, I took possession of the Documents and Settings folder, and I'm looking for emails.  I followed the path, Documents and Settings / / AppData / Local / Microsoft / Windows Mail but there are 2 folders, backup & stationery as well as a few small files.  Where I could hide my email? Please, I beg you.

  There should be a directory called local folders under the message store and eml files organized into folders named after the directories under this directory are.  They may be hidden files, so make sure that you have enabled the display of hidden files and folders under control panel | Folder options | View.  You can also try to search *.eml, because messages are stored as eml files.  See www.oehelp.com/backup.aspx#wm for background.

  Steve

• I can't access my user account even if the password is correct.

  I was not able to access my user account even if the password is correct. It happened to our 2 admin represents, so now we only use the guest user account.

  Hello

  Something must have corrupted these accounts.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can I remove the file 'SaveData.mig' after I run Windows Easy Transfer?

  Can I remove the file 'SaveData.mig' after I run Windows Easy Transfer?

  I used easy transfer to move files from an old computer to my new about 12 months ago. The SaveData.mig file takes 22 GB of space on the new computer. I would like to remove it but I don't know if it will mess up all my files that have been transferred to my new computer. Anyone know if I can delete this file in order to free up space? Thank you

  I agree with Mohdrafi - you can remove safely; However, you should have a more recent backup of your current files just to be on the right side (image FULL weekly backup and an incremental backup every day for an external HARD drive - I've seen too many people get burned when their drive hard breaks down or something worse and then they lose all their precious documents (, photos, audio and other files).  There ARE recovery procedures, but they don't always work, and they don't always get everything (especially if you expect to solve the problem or continue to use the PC in the meantime)- and depending on your version of Vista.  Delete this file will NOT affect the files and settings that you restored using the process.  Could have deleted it hours after that the process has been done (once you have a good backup) and it would have been very well then.  If you have a good backup, I can see no reason whatsoever to keep the file.

  If the normal delete function in Vista doesn't work, try using one of the following free products to remove the file.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.

  Congratulations to the use of Easy Transfer - this is a pretty cool tool isn't it?  Not sure how many threads that we have here people with issues or recoving given him--I saw a lot.  It seems easy on the surface, but when it doesn't work it can become quite complex and aggravating (and I know people who have unfortunately never were able to retrieve their data and settings no matter what we tried).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why windows doesn't let me access my user profile?

  When starting my computer I cannot access my user profile after entering my password it says "user profile service Service failed the log on" "User profile cannot be loaded" bold/underline is not typo, this is what appears in the message. Although I can always open a session, using another profile, I set as a system administrator in the profile that I can't access. Therefore, I am unable to change the settings of the user profile, or anything else that requires an administrator password. I hope someone out there can help with my frustration, I would be so grateful. Thank you in advance.

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unit UM after hours VM

  I have 4.0 (4) unit with the CCM, and currently the main published line is transferred to your voicemail after hours. When someone calls this line, obviously achieved unity and are dumped into the main body with the option of dialing another extension of users. When they dial another extension of users, they are dumped directly into this mailbox to users. I'm trying to find a way to get callers ring the phone of users before you go to the voicemail box. How could do?

  Thank you.

  Each Subscriber has a transfer to his account rule - by default it is the start (i.e. the ring their extension first custom before going to their wishes). You can turn on their transfer rule such that it will ring their phone first before playing the greeting. You can change this on a basis per subscriber in SA going to the 'Call transfer' link to off the page of the Subscriber, allowing it and put it to 'Yes, ring extension... '. "You probably want to transfer supervised instead of out in this case.

  You can modify it to groups of subscribers or all subscribers using BulkEdit found in the depot of tools on the Office of the unit.

• In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

  When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Help, please! Cannot access the web after connected to the VPN

  Hello

  I'm a newbie on Cisco products.  I configured a Cisco ASA 5505 with VPN firewall.  However, I can't access the web after I connected to the remote IPSec VPN.  I also cannot connect to the bands using the intellectual property.  But I can connect to the internal servers in the office with no problems.

  Here is my setup, can someone help please?  Thank you very much

  ASA Version 8.2 (5)

  !

  host name asa

  xxxxxxxxx.com domain name

  enable the encrypted password xxxxxxxxxxx

  xxxxxxxxxxx encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  area of zone clock - 8 schedule

  clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00

  DNS lookup field inside

  DNS server-group DefaultDNS

  Server name 107.204.233.222

  name-server 192.168.1.3

  xxxxxxxxx.com domain name

  inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  interface ID client DHCP-client to the outside

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal strategy group xxxxxxxx-sc

  attributes of xxxxxxxx-sc group policy

  value of 107.204.233.222 DNS server 192.168.1.3

  Protocol-tunnel-VPN IPSec

  XXXXXXXXXX.com value by default-field

  xxxxx xxxxxxxxxxx encrypted password username

  Strategy Group-VPN-xxxxxxxx-sc

  remote access to tunnel-group xxxxxxxx-sc type

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  Group Policy - by default-xxxxxxxx-sc

  tunnel-group xxxxxxxx-sc ipsec-attributes

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  call-home service

  anonymous reporting remote call

  call-home

  contact-email-addr [email protected] / * /

  Profile of CiscoTAC-1

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02

  : end

  Hello

  Try adding the following commands

  permit same-security-traffic intra-interface

  NAT (outside) 1 192.168.1.96 255.255.255.240

  Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.

  In this case, these configurations should do the trick

  In order from top to bottom, they would do the following things

  • First remove the pool VPN and VPN configurations
  • Then remove the VPN pool
  • Remake of the VPN Pool with different network
  • Reattach the VPN pool for VPN configurations
  • Configure NAT0 to the new cluster of VPN
  • Remove the old line of the ACL of the configuration of NAT0

  attributes global-tunnel-group xxxxxxxx-sc

  no address-sc-swimming pool

  no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0

  no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240

  Of course you also have the NAT configuration for VPN pools new Internet traffic

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Please rate if the information has been useful if this resolved the issue as mark responded.

  -Jouni

• Will system restore remove e-mail accounts created after the date of the restore point?

  Original title: System restore

  Will system restore remove e-mail accounts created after the date of the restore point

  Hello Nick,

  The emails and your gmail account settings would not be affected. But, if you have configured your user account in Windows 8 with the newly created Gmail account, these configurations too after the restore point then only, would be affected not the main account to the Gmail server.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  Thank you

• How to remove Code condition on iwatch after the last update

  How to remove Code condition on iWatch after the last update?

  Hello

  On your iPhone, in the application of the watch, go to: My Watch (tab) > password - tap on disable password.

• How to remove photos from my iphone6s after their importation?

  How to remove photos from my iphone6s after their importation?

  Hello KConstant,

  I understand that you're looking to remove photos from your iPhone, after you import the to your Mac. It depends largely on how the images are imported into your Mac.

  If you use iCloud photo library, remove photos from your iPhone, after they have synched to the Photos on your Mac afterwards would remove these photos on your Mac as well, like iCloud photo library is designed to synchronize your iPhone with iCloud and Mac.

  However, if you are importing photos via the USB port of the Photos app, you should be prompted to delete pictures from your device once the import is complete:
  

  Once the import is complete, a message asks if you want to delete or keep the photos on your device. Click on remove items to remove photos or click on keep items to keep them on the device.

  Import photos and videos from your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201302

  You can also (it not allowed you iCloud photo library on your iPhone), you can use the image capture on your Mac app to delete images from your iPhone. This can also be useful to remove the last images that have already been imported into the Photos on your Mac. Once you have selected the images you want in the Image Capture, you can click on the prohibitive red symbol () to delete the selected items.

  Image capture: transfer images and other elements of your device
  https://support.Apple.com/kb/PH17894

  Concerning