removal of all audio tracks in a project

Similar Questions

• Importing a project in EP 12 trial, read not all audio tracks!

  I have tried the vesion of the trial of 12 EP.  Import a project that I created with PE 9.  Everything seems to have been imported, including all audio tracks.  But when I play it back, some of the audio tracks are completely dumb, while others, are very well and I can hear it.

  
  Any idea what can cause this?

  With the Audio tracks 'muted', I would look at a few possibilities and especailly with a project created in an earlier version of the PrE:

  1. Open the Audio Mixer Panel and look to see if all the titles are muted.
  2. Play the timeline, and noted the concentrations in the Audio Mixer Panel and also if there is any movement of the "sliders" in the Audio Mixer Panel.
  3. Observe the Audio tracks, your Audio Clips are in the timeline and report those please.
  4. Ensure that the display of the keyframe is set to Volume in your Audio Clips, are there Volume keyframes?

  I'm sure others will have some more ideas and questions.

  Good luck

  Hunt

• All audio tracks are on the disc?

  Im not sure which forum is the best for this question, so here goes...

  I have a multicamera in PR sequence, which is linked dynamically to still and "Transcode now" in the SOUL.

  During transcoding encoding current windows that it treats audio tracks of all the tracks, even if the option to use only audio track 1 is selected in the PR

  All these titles are included on the disc? Is it possible to prevent them from be included on the disc / processed in the SOUL?

  Thank you.

  Wolv-

  SOUL will often treat each audio clip in a project before transcoding.  It's normal and nothing to worry about.

• [Pre Ele 9] Audio tracks in the project are frozen. Impossible to move, edit, or even choose.

  Hello

  It is my first project using first. Great program, when you know what you're doing. Now, I'm on a modest laptop, Vista 32-bit, 2 GB of RAM, Dual CPU @ 2.00 ghz. My project consists of .wma of some .mp3 files, of .wav and some .jpgs. It's a small project, ten minutes, about 20 clips, some denominations of 20.

  I don't know exactly what happened. I tried to spend all my audio files that I had to fill this gap, I did. But I think I clicked on group, or link or something, by mistake, and now two of my audio tracks are literally does not. They play perfectly to the preview, but I can't move. I can't even select them. Make a right-click on the soundtrack does nothing. Even weirder is that my Audio 1 track is normal. It's just my narration and soundtrack songs that pose problems. I did research online, and I've heard of them being 'locked' or 'disabled' or something with keyframes. But I don't think that's it. Or maybe I need more of a noob guide. I turned on the size of the track and I saw the wave form for my audio. This is, but it is lower than my Audio 1 waveform. Also, I have tried to replace and made, but that has not worked. Finally, every time I try to add a new audio file in one of the two audio tracks, the program basically ignore and place in 1 Audio, or even create a new audio track.

  I know I did something so simple, I know that I just need to uncheck this tiny bit option. Maybe some of you are even sneering. But please, I beg you, help me. Put an end to this torment.

  If you need more information, let me know.

  Thank you for your attention.

  I agree with Neale on this one. Narration and soundtrack are 'fixed' Audio tracks and include at least one property, other Audio tracks do not have - they cannot be deleted. Usually, they work very well, as indicated by their names, but then sometimes, they refuse everything works correctly. Why? I've never seen a common element, when they just sort of freezing, or refuse to mix their Clips.

  Because this behavior has struck several, most of us recommend just DO NOT either using, and instead, simply by using a regular vacuum Audio track. I remember an instance when this proceeure did not work. This behavior has been around for over PrE4.0, by my reading, but can happen even earlier versions. There is just something in the structure of these two Audio tracks, coming "alignment", with some operations, perhaps assets.

  On the note of "certain assets", you happen to have MP3 files on one of these titles? They can cause endless problems, and not only on these two fixed Audio tracks. If you have any MP3 files, take a look at this ARTICLE.

  Good luck

  Hunt

• All audio tracks do not burn to CD

  Problems with playback after burning a cd

  I have recently started to experiencing problems with cds to bury it. I have always used for Windows Media Player for Vista for cd burning and have never had any problems in the past, but all of a sudden I get error messages, or sometimes no message and seems correctly, but then is still burning, it is no of tracks on the cd. Maybe remove a crucial part of the program or something of that nature? Is my burner broken? Or is it something simple to solve. Things I've tried: passage to the fire low speed setting, erasing disks RW and Afterburner, try new unused disks, ensuring his game on audio and not data disc or a DVD. I am currently using Memorex. The packaging reads as follows: CD - RW 12 X 700 MB / 80 min. Maybe this brand is not compatible? Reasonable advice would be greatly appreciated. Thank you, Melissa.

  Hello

  I would like to get a better understanding of this issue so that we can better help you.

  . What is the full error message and codes error do you draw?

  .  You did it all change hardware or software on your machine before this problem?

  I suggest to follow the steps in the link below and check if it can help

  Method 1: Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Method 2: I would also suggest uninstall you all 3 party DVD burning software and see if it helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information is useful.

• Removal of empty Audio tracks?

  In any case to remove empty audio clips in bulk in the form of lots?

  I have about 200 clips all have six tracks of audio embedded, but they only audio in the first track. I would like to delete the other five, so that I don't have to do it manually for each unique clip. Any ideas?

  I'm kidding it is super easy:

  Select all your clips.

  Change--> Audio channels--> number of Audio Clips (1)--> only check the layer of the element you need

  Donezo!

• Audio playback on listening? When I started to work with more than 1 audio track.

  Hello!

  I have been using first elements 12 for the full HD video editing.

  Brand new for me just bought it 2 weeks ago.

  Now, during the last two weeks, I had this MAJOR proglem with audio editing.

  This problem is the headache and turn my simple editing in almost impossibilities.

  I had this problem with all my projects. SUBJECT

  Generally, the problem appears when I want to start working with multiple audio tracks.

  At somepoint that my projects just gets ruined, I do not mean just the audio tracks.

  The audio starts to disappear at random all audio tracks.

  It is not only about reading. When I exported the video, the audio has been partly missing, as well as the project.

  I tried to get help on the forums and find all that I could find, but have not been able to solve this problem.

  Small fix helped a little:

  I have the audio export to single track and bring back to the project. It works but I still usually edition more to do.

  I do not understand why reading disappears, I fear that this is a bug.

  I found a lot of problems in previous version on people with the same type of problems, but no help for this version of the program.

  To solve the case, I changed my audio setting in ss12.

  I tried to first WDM Sound and ASIO4ALL V2 components, but same problem on both.

  I have looked up my device for audio playback and ss12 matches are not on mute, and volume up.

  I deleted my first items appdata\roaming\adobe C:\ & first 12 items folder preferences... help do not...

  I press the update about every day in the hope of a new version... But yes, program always tells me it's the last.

  I usually work with 3 maxinum of audio track only. And I do really basic here stuff...

  I have put all my audio to the fore and he gave me the best results, but it does not appear to take the problem by far as at somepoint randomly my audio playback is missing again, randomly through the reading.

  Please someone? I feel desperate here.

  Info about my computer:

  Operating system: Win7

  Processor: AMD Athlon (TM) x 4 955 processor 3.20 GHz

  (vivid RAM) memory: 4GB

  system: 64-bit

  < left download, installation, setting up mod-kglad forum >

  Post edited by: kglad

  Tascruel

  Thank you for asking. I wanted to put that in my last answer and I forgot to do.

  The Adobe party line is that you cannot change a predefined project settings when it is enabled and that you are in the Premiere Elements workspace. I described a way to do in some cases when editing Notepad document of the project saved/closed (project.prel) file.

  http://www.atr935.blogspot.com/2013/05/pe11-changing-project-settings-without.html

  It is often easier to start a new project with the appropriate project preset, blocking the automatic action of the program in this regard. To do

  Open Premiere Elements in his workspace Expert.

  Go to file Menu/New/Project and in the project preset together preset that matches your source media properties. Before leaving the new project dialog box, make sure you have a checkmark next to the "Force selected setting on this project."

  Back in the workspace of elements Expert first, then go to add media/files and folders to your source media in the assets of the project which you drag the media from the source to the timeline.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add it... Check your project settings via Edit Menu/Settings/general project, against the readings, especially in editing Mode, timebase, and image size.

• How to see several audio tracks?

  I have a mov file which has two tracks - music and a voice-over.  When I export PR it exports only the music.

  How can I get both channels to be seen and exported?

  (Ironically, Premiere CS3 shows all audio tracks, 2 channels stereo, default - no work required!)

  Okay, I think that I fixed it.  I changed the number of channels to 6 (he showed the clip 4), now it seems to work.

  Does anyone know why he looms like this?  There are 4 ways, I believe, 2 for each audio source (it seems to look OK in CS6/3, but 6 channels)?

  Settings in the settings to change:

  

  4 channels (does NOT work correctly, only shows audio channel 1):

  

  I have to select at least 6 channels for all shows:

  

  That's what looks like the CC with 40 channels (there seems to be 3, adding more just creates empty strings):

  

• export a project with several audio tracks changing volume level regardless of the export format

  Recently, I had to submit a TVC and discovered this first changed the power after export level, when the TVC has no quality control.

  I checked the sound intensity of other formats that I had exported and the same thing happened the sound intensity, she had changed.

  After a bit of troubleshooting, I've found a workaround. I have mixdown all tracks in adobe hearing to a track and then imported it in first.

  Once I did the sound intensity did not change after the export.

  "Workflow" for when it did not work.

  I used the edit in adobe for audio tracks from first hearing.

  Corresponding to the audio for the power level, I wanted to and then recorded each track.

  Export first.

  To check the sound intensity

  Put in the file exported in new project first

  Edit audio in adobe hearing.

  Drag the audio file in game audio to check the sound level.

  I use

  Adobe first Pro CC v8.1

  Windows 7 on PC

  Fix this adobe.

  So you should use Loudness Radar in the mix... .to requires the specification of the broadcaster.

  Your workflow such as described did not understand that.

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• How to: remove the scenario-specific audio tracks?

  I just CS3 where in the source of the window had a toggle audio, video, audio, which allows you to apply just audio (if that's what you want) by using the insert/overlay.  CS5 seems now that he has separated these buttons and were not able to understand how to switch only audio or video only from the source.  I know I can recover the source video or the sound icon and drag it into the timeline, but it can be faster by using the insert/overlay.

  My questions are:

  -How to select only audio or video of the source monitor for use with overlay/insert keys?

  -When you work with multi-track audio containing source material, is it possible to select specific securities to slide on the timeline without dropping everything down?

  The "buttons" on the left of the timeline panel in the information header/track area are the source and target range selectors. You use them together to enable or disable specific tracks from a source element and to direct these incoming securities in specific titles in the sequence.

  

  The "buttons" on the left (in this example) labeled V and A1 are the tracks contained in your source clip in the source monitor. Depending on the nature of your source footage, you will have between 1 and 4 audio tracks, that you can select. You will always have a track V (video), however. Click them to toggle these sources on or off for an insert or overlay Edition, and dragging them upward or down to target what destination track, you want to modify it to be placed in.

  At the same time, you must enable or disable the target tracks so that the change to happen the way you would expect. They are the right marked "X Video" and "Audio X" buttons. You can turn on all, any, or some of those securities and have different effects. The simple story is that, if you want the tracks from a source item to be edited in a set of tracks specific targets, the selector buttons must be "enlightened" to indicate the tracks are on and targeted.

  Here's an example, using pliers DVCPROHD with four mono tracks:

  

  In this case, if I had to make a montage by inlay, the video source ('V') will overlap on the destination track Video 2, but it will edit also 'empty' on the destination track 3 video because I turned it on. For audio, I have traced Audio Source 1 to Target 2 Audio, 2 Audio Source to target Audio 1, Audio audio Source 3 target 4 and even if the Source Audio 4 is 'turned on' it has no effect because the target Audio 3 'stops.' In this way, you can target selectively tracks are made during an insert or overlay edit, using the commands insert and embed in the monitor Source or Bin. Note, however, that this choice has no effect when you drag a clip from the Source monitor or the tray; in this case, all THE source Flickr photos will be displayed in the order, but you can position them to some extent by pressing the Shift key once you place a portion of the clamp and slide it across to the demarcation line between the video and Audio tracks.

  The target range selectors affect also, whose securities are the subject of chronology, as 'razoring. operations

  I hope it helps a bit. The best bet is just to play with it; It takes a while to wrap your head around, but will make sense after a little exploration.

• How can I change / remove the first seconds of the view / specific part of an audio track in Premiere CS6?

  It is very difficult to accomplish.  Is it possible that I can do the biggest wave form?  I want that its not let me cut the specific part.  Its always keeping first frame or two

  Make a zoom in on the timeline with the navigation bar or the scroll wheel and also make her taller audio track by scrolling in the header.

• Help please - CS5.5 Why is the audio track not projection in the timeline?

  Of course, I would appreciate your help.  I have been using Adobe first 6, then 6.5 years as a hobby.  I'm a big fan of the first.  Around November 2011, I upgraded to CS5.5.

  I was working on a video with my son recently.  We use MPEG4 video of his digital camera.  I never have this problem.

  Imported fine video.  The problem is that the audio do not arise in the audio track.  When we played the video track, the audio played, but doesn't

  no show.  Out of curiosity I opened the first Elements to see if the audio track would show the video track separately, and he did.

  Is there something I can do to make the audio track appears in CS5.5?

  Thank you for your time and your help.

  Until you see one that you can't see, scroll down the audio tracks. It can be on track 4 or even raining down.

• Adobe Premiere is doubly my audio track

  

  Whenever I import a video, two audio tracks are displayed instead of one. I have to cut it, and when I push in the sequence, I have the choice to either remove the audio every time that I import it or I cut the track and keep it to the end and has 3 audio tracks or more all the time. I can't hear the audio track additional in the default Windows video I watch the program, so if it's really a part of the recording, I can't say. How can I fix it? If it is a registration issue I use OBS Studio.

  With your clips in your project window, select all and then right-click > edit > audio channels and choose '1'.

• Audio filter missing corrupt project...

  Keep getting this error when I open my project,

  

  and now my sequence disappears before my eyes.  He plays through, but securities become invisible, apparently at random. Seems people have had similar problems with images that is synchronized with the Eyes (as mine has been) in the plural. Im running first 2015 CC more output current.  Anyone fromAdobe want to take a look at my project folder?

  Well, I found a solution.  Here's what I did:

  1. remove all the audio effects of corrupted chronology

  2. make offline media

  3. export XML

  4 import in FCP7 (sorry Adobe)

  5 unlink video and audio tracks and remove a stereo pair.  Remove the audio effects again.

  6. export xml.

  7. new import ' clean xml in first.

  Problem solved.

  Seems that some unnecessary steps I know not, but it didn't work until I did all in that order. Hope that helps anyone who has the same problem.