How to see several audio tracks?

Similar Questions

• How to see several audio files after dynamic link with After Effects

  Hello.  I'm using Adobe CS4.  I created a dynamic link between After Effects and Premiere Pro.  I have several files audio in my effects after composition, all positioned in approximately the right place in the timeline panel.  Can I still access each of these audio clips in Premiere Pro or first made a composite audio file of all the clips in After Effects?

  If the first is simply lump these in a big audio layer, what' his good workflow for fix all my audio clips?  Can I simply drag each file in a separate first track and reposition manually or is there a way to capture data from After Effects?

  Thank you

  Dynamic Link allows you to import an AE comp in the body, the imported clip is a composite - video and audio. Even if there is no sound in an imported model, Dynamic Link will create an audio track empty - one of the oddities of the DL. Therefore, you have no direct access to individual elements of video or audio clips used in the model of EI, when placed in a timeline of the organization.

  However, you can easily copy elements of film - in your case, audio - editing of your AE comp and paste it into a timeline of the Organization, as described here. I assume you have an animation timed to your audio tracks and want to preserve this - no problem. Just copy the audio clips of the AE timeline, position the CTI in the same relative position in the body and paste. Your audio clips will be placed in as many tracks that are needed (depending on duplication) and you will have access to each individual audio clip in the timeline of the organization.

• Nesting of several audio tracks - how?

  Hi all, I cut a doc shot the dual system DSLR and pulling on my hair.

  My post workflow is to nest 1 video track with two separate audio tracks (one is a LAV and the other a boom). However, when I bring the new nested in a timeline sequence, there is only 1 audio track. Can't really tell if she married the two tracks into one or if it's just to take the track 1.

  Whatever it is, I want to maintain both my audio tracks (so that I can independently manipulate them) during nesting. Is this possible? If so, how?

  Any help would be greatly appreciated.

  Thank you

  Nesting default collapses all the video and audio tracks into one of each.  You can change this behavior by clicking the icon to the left of the magnet in the sequence of timecode.

  Merge with audio video separated may be the best option, however.

• How to replace an audio track

  How can I replace an audio track of low quality for a high quality one on Final Cut Pro X? For example, the audio of the film, by audio recorded simultaneously?

  Once I have sync clips, I can't see the two lanes in separate and remove that unwanted, I could do before (see https://www.youtube.com/watch?v=_qfIe6GbkzY). It does not work like that, and I don't know what to do!

  Thanks for the help!

  Myrna

  If there is a clip of multi, you can open it in the editor of the Angle and click on the speaker icon on the clip that has the sound you want to disable.

  Russ

• Several Audio Track FX Editor Windows

  Hello

  I was wondering if there was a way to open several windows of the Audio Track FX Editor. See the picture of the seal. I would like to be able to have several windows open so I can monitor various audio plugins/effects at the same time, is this possible? Currently if I double click to open a plugin/effect of the mixer Audio Track the open effect closes and is replaced by the I just double clicked.

  Images accompanying if it means anyway.

  Adobe, if there is a limitation of first would be great if it was included in a future update.

  See you soon.

  

  

  Obtained assistance help Nugen Audio Nugen Audio | NUGEN Audio -the solution is to hold down SHIFT when you double click and you can have several windows open.

• iMovie and several audio tracks

  Hello

  I'm trying to import video with multiple audio tracks (track 1 - background sound + voice; Track 2 - background only. Track 3 - voice only) in an iMovie but it just merge all tracks to unique soundtrack.

  How to split audio tracks in my video?

  Thank you.

  iMovie gives no control on separate audio tracks, you should use a professional for editing software do.  I think you can remove the audio tracks you don't want to hear using the handbrake (https://handbrake.fr/) before you import into iMovie (although I've never tried myself).

  Geoff.

• How to expose several audio channels of the MXF file in body CC 2015?

  I import MXF (from C300) files that should have two audio channels separated from two different microphones. (When these files are opened in Final Cut you can see two audio channels to separate). Agency CC 2015 it shows me only one audio channel. When I go to "Edit"->"audio" window I see no way in there to expose the second audio channel. How do I do that?

  You'll need a parameter like this:

  

  You need to do before you put anything on the timeline.

• First Elements 13: Mounting a WMV distilled from a PowerPoint... Can't see the Audio track

  I am someone help with what we thought would be a minor change task. We have a WMV file created from a PowerPoint presentation (and no, we don't have access to this old PowerPoint). We need to move some of the video autour, but leave the audio the same. When we added the media, we can see the video and hear the sound, but the audio is not on a track in the timeline panel.

  For some time I used the first. The answer lies in the conversion of PowerPoint to .wmv? Is this why we cannot see a separate audio track? Any help would be greatly appreciated.

  Richards_Daddy

  I hope this will be new to the program rather than a question of serious program concern.

  I am basing my optimism on your statement of "when we added the media, we can see the video and hear the sound, but the sound is not on a track in the timeline.

  What version of Premiere Elements are do you use and which operating system is involved?

  For now, I'm going to presume first items 11, 12/12.1, 13/13.1 on Windows 7, 8 or 8.1 64bits.

  In what specific workspace to the project are you? You are in the area of Expert work or fast.

  Fast working space is not a dedicated numbered audio track.

  If you are in space and quick work of his film, then go to the workspace Expert with his script numbered video tracks, audio tracks numbered, track of Narration and soundtrack.

  If this isn't the problem, then we can move on to other factors related to the issue.

  Thank you.

  RTA

• How to play two audio tracks together?

  Original title: Please give me an answer as soon as possible.

  How to play two audio files.

  Is English spoken numbers and another with Hindi spoken numbers. These files are read on a single system after robin its mix of figures.

  How can I do?

  Hello

  You want to play both audio files simultaneously?

  If you want to play two music files at the same time, you need to use 2 media players. You will then be able to hear the two pieces of music at the same time of the machine.

  However, if you want to play the 2 files in such a way that for a moment plays English and then for a few minutes the other plays, you will need to use some sound capture software to cut clips from the original files and merge them accordingly and play.

  Microsoft doesn't have any audio/video capture software. However, you can use your favorite search engine to download any software cutting.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to play several audio files at the same time and mute toggle some voices?

  Hi all

  Forgive me if this is mentioned elsewhere and kindly point me in the right direction.  I'm a kid with flash and action script so if you are in doubt, error on the side of more specific in your response, there is a lot of vocabulary I still don't know.

  The goal:

  I have 4 audio files which are Soprano, Alto, tenor and low voice of a musical example.  The result should allow the user to play all 4 voices at once and dumb voice specific to hear all the possible combinations of voices playing together or solo.  I imagined a check box at the beginning of each rated musical line that puts that voice muted when checked.

  It would be ideal to have the game, interrupt and stop reproduction choices where 'Stop' resets playback at the start and 'Pause' maintains the current place in time and takes over from there, once playback is started again.

  I am able to get the simple audio files to play from a single button, but I am struggling to find how to link multiple audio files to start at the same time by a single button.  I found this link: https://forums.adobe.com/thread/1069107?start=0 & tstart = 0

  where the last message mentions the use of tables, but being a complete beginner, I don't completely understand what they are doing.

  I know it's a big piece of questions at once, but if you could meet any part of it, or direct me to a tutorial/instructions, I would really appreciate it.

  Thank you for taking the time to help others

  use:

  kglad wrote:

  use:

  import flash.events.MouseEvent;

  import flash.media.SoundTransform;

  var soprano: Sound = new Soprano();

  Var high: Sound = new Alto();

  var tenor: Sound = new Tenor();

  var bass: Sound = new Bass();

  Ash var: Array = [soprano, alto, tenor, low];

  var offsetA:Array =]

  var st: SoundTransform = new SoundTransform();

  play_btn.addEventListener (MouseEvent.CLICK, playF);

  pause_btn.addEventListener (MouseEvent.CLICK, pauseF);

  stop_btn.addEventListener (MouseEvent.CLICK, stopF);

  playF function (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = [i] Sunda () .play;

  }

  }

  function pauseF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = this ["sc_" + i] .position;

  This ["sc_" + i]. Stop();

  }

  }

  function stopF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = 0;

  This ["sc_" + i]. Stop();

  }

  }

  function unpauseF(e:MouseEvent):void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = Sunda [i] .play (offsetA [i]);

  }

  }

  function muteF(i:int):void {}

  St.volume = 0;

  This ["sc_" + i] .soundTransform = m;

  }

  function unmuteF(i:int):void {}

  St.volume = 1;

  This ["sc_" + i] .soundTransform = m;

  }

• export a project with several audio tracks changing volume level regardless of the export format

  Recently, I had to submit a TVC and discovered this first changed the power after export level, when the TVC has no quality control.

  I checked the sound intensity of other formats that I had exported and the same thing happened the sound intensity, she had changed.

  After a bit of troubleshooting, I've found a workaround. I have mixdown all tracks in adobe hearing to a track and then imported it in first.

  Once I did the sound intensity did not change after the export.

  "Workflow" for when it did not work.

  I used the edit in adobe for audio tracks from first hearing.

  Corresponding to the audio for the power level, I wanted to and then recorded each track.

  Export first.

  To check the sound intensity

  Put in the file exported in new project first

  Edit audio in adobe hearing.

  Drag the audio file in game audio to check the sound level.

  I use

  Adobe first Pro CC v8.1

  Windows 7 on PC

  Fix this adobe.

  So you should use Loudness Radar in the mix... .to requires the specification of the broadcaster.

  Your workflow such as described did not understand that.

• System Audio XLR - K1M &amp; Sony A99 / how to import 2 audio tracks?

  As stated in the subject, I use a XLR - K1M with a Sony A99 and I can't seem to find a way so that it can record 2 channels at once.

  I can keep it on the channel 1/2 to save, but when I bring it in adobe first he comes in as 1 track audio instead of 2 audio tracks separated.  Am I missing a step here?

  Non-linear editing, a tool that should be part of Adobe first. Unfortunately we don't really support third-party software. The goal is to separate the channels into two separate tracks. Contact Adobe for additional help.

• How to make two mono audio tracks in a stereo pair?

  My clip video, brought in first CS6 of Final Cut Pro 5, the left regular and audio tracks right, but first, they are not related in a stereo pair. Thus the volume level must be set separately in each track.

  In Final Cut, I can convert two independent audio tracks in a pair of stero selecting tracks and then by going to the Edit menu > stereo pair.  I can't understand how to do this first.

  When two audio tracks are not related, the volume level must be set separately in each track that is slow. But after two tracks are linked in a stereo pair in Final Cut, or another track adjustment allows to set both, together. That's what I want to do now in first.

  So, how do two separate audio tracks in a stereo pair in first?

  Tom

  Welcome to the forum.

  Have you looked at the padding on the left and fill right Audio effects?

  They should get what you want, or almost. Now, the result will be stereo double mono and not true, but will be 2 channel, and that is, I believe, what you really want.

  Good luck

  Hunt

• Audio tracks to follow tempo changes

  Hi all

  I'm really confused about something on Garage Band for iOS. Currently using an iPad with iOS 9.3.1 Pro 12.9.

  I started a new project, captured a loop of battery from another application (Anytune Pro in this case) and trimmed the loop so I could loop it and practice on top of it.

  I changed the tempo of the project and audio followed the project tempo change in an "elastic audio" way.

  What is happening now is that I tried to do again, and audio tracks do not follow the tempo change more! I don't know what I did different, I tried to reproduce several ways, but it simply does not work...

  Here is the link for the session, you can open it in your iOS device and change the tempo and you will see that the sequence (salsa one) will match the tempo of the session.

  https://www.dropbox.com/sh/swbfnj24qbuzhmn/AABSGk-zwc1GlMqxlYTMAhQda?DL=0

  If anyone can help me and explain how to make the audio tracks to follow tempo changes, I'll be very grateful! Thank you very much!!

  Hi flaviolira123!

  I can't open your file in Garageband (latest Version).

  But I think that you can only use Apple Loops loops to automatically match the tempo.

  I tried to loop an imported audio clip (import song, trimm)- but I do not have to be matching of tempo.

  I imported a DM1 via Interapp drum - but if I change the tempo of the project, my pace is in the old tempo...

  Have you found a solution?

• Importing video with 2 audio tracks

  Hello

  I've saved my computer with Action Mirillis screen! that allows me to record several audio tracks (in my case: the sound of the computer in 1 audio track + my voice through an external microphone in a second audio track)

  When I open the MP4 file in VLC, I can manually switch between 2 tracks, it's great workign.

  But when I want to import the video file in first pro, it only shows me that the 1st song (the sound of the computer) and it is impossible to get the 2nd audio track

  Yes I can demux with avidemux or virtualdub (even if I have some problems to import .wav in first) but I would have preferred a "cleander" option to get my track

  (I said it's 2 separate audio tracks, is not 1 stereo track with L = his computer and R = my voice)

  Windows 7 64 bit + Adobe Premiere Pro CS6

  Thanks for your help guys, I hope I will get some

  Guillaume

  lol bad advice for CC being able, sorry. I tried both, but found my sample not as I thought. What I saw in a CC project was a sequence with an audio multi-channel which must have been in a preset, and I thought it was a new automatic sequence. I won't go in depth about my mistake, but please, do not assume that CC will solve unless someone can fix.

  When it comes to the audio of your Sony Vegas. If it's anything like the first, I disable the video track, mute the audio track top and export only the background audio track that you don't see at first. After that only import the audio into first and place it under what you already have.

  Regarding the future, the next time - would be a voice on track help, after your first record?