Removal of hidden values

Similar Questions

• How clean/remove HPA (hidden protected area) Lenovo/IBM hard disk

  I have released an old hard drive to a machine breakdown T41 and want to use the drive as an extra drive (drive D) in my T43 machine.  As with all hard drives T41, there is a hidden to recovery etc. partition.  I would remove this hidden partition to create more space on the old disk T41.  How can I do this? MUCHAS Gracias in advance

  I think you're confusing two different standards of measurement. Hardrive manufacturers measure readers in bytes with 1000 k = 1000 k = m, 1000 m = g, but the windows operating system counts with exponants, if k = 1024 (2 to the 10th power).

  A 40 GB hard drive will be approximately 40,000,000,000 bytes, but the operating system sees about 37,25 Go. I know it's confusing, but if my explanation does not clear, so suffice to say there are two different things and you don't miss anything

• Remove the NULL values and update the value according to the logic

  Hello

  The problem data

  CREATE TABLE VOLA (SRNO, NUMBER, zero

  NUMBER, A

  NUMBER);

  INSERTION of REM in VOLA

  TOGETHER TO DEFINE

  Insert in VOLA (SRNO, ONE) values (1,237.94);

  Insert in VOLA (SRNO, ONE) values (2, null);

  Insert in VOLA (SRNO, ONE) values (3,203.565);

  Insert in VOLA (SRNO, ONE) values (4,170.69);

  Insert in VOLA (SRNO, ONE) values (5,113.67);

  Insert in VOLA (SRNO, ONE) values (6,93.6);

  Insert in VOLA (SRNO, ONE) values (7,82.03);

  Insert in VOLA (SRNO, ONE) values (8,66.675);

  Insert in VOLA (SRNO, ONE) values (9,63.59);

  Insert in VOLA (SRNO, ONE) values (10,61.415);

  Insert in VOLA (SRNO, ONE) values (11,60.015);

  Insert in VOLA (SRNO, ONE) values (12,58.235);

  Insert in VOLA (SRNO, ONE) values (13,57.805);

  Insert in VOLA (SRNO, ONE) values (14,56.965);

  Insert in VOLA (SRNO, ONE) values (15, null);

  Insert in VOLA (SRNO, ONE) values (16, null);

  I have to remove the NULL values in column 1, the problem is that the position of the NULL values are not fixed, and it can be any position. If all the lines of the columns are null, then throw it away.

  If multiple NULL values are here so I have to do the math as follows to update null with the eigenvalues

  1. If the first line is null then take the 2nd value in row and update it.

  2. If the lines between both is null then take avg of prev and next value not null and refresh it.

  3. If the last value in the column is null, then then take prev and update, in this case last two are null, so I have to take value of prev 14 value line update in

  15th and 16th ranks.

  I want to put this pl/sql logic, somehow, that I thought have loop and counter aapproach and loops through the elements and check and update.

  But always looking for something better before looking to write code. No idea or help will be useful for me.

  I * think * you are looking for something like:

  WITH VOLA (SRNO, ONE)

  AS (select 1,237.94 from all the double union)

  Select 2, union null value double all the

  Select 3,203.565 from all the double union

  Select 4,170.69 from all the double union

  Select 5,113.67 from all the double union

  Select 6,93.6 from all the double union

  Select 7,82.03 from all the double union

  Select 8,66.675 from all the double union

  Select 9,63.59 from all the double union

  Select 10,61.415 from all the double union

  Select 11,60.015 from all the double union

  Select 12,58.235 from all the double union

  Select 13,57.805 from all the double union

  Select 14,56.965 from all the double union

  Choose 15, null of union double all the

  SELECT 16, NULL FROM dual)

  GET_VALUES (SELECT SRNO, ONE ACE,

  , LAST_VALUE (WE IGNORE NULLS) (ORDER BY SRNO CSA ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING) AS PREVIOUS_VALUE

  , first_VALUE (ONE IGNORE NULLS) over (ORDER OF SRNO CSA ROWS BETWEEN 1 SUITE AND FOLLOWS without TERMINALS) AS NEXT_VALUE

  FROM VOLA)

  SELECT SRNO, ONE, CASE

  WHEN IT IS NOT NULL, THEN WE

  OTHER CASES

  WHEN PREVIOUS_VALUE IS NOT NULL AND IS NOT NULL THEN (PREVIOUS_VALUE + NEXT_VALUE) NEXT_VALUE / 2

  WHEN THE PREVIOUS_VALUE IS NOT NULL, THEN PREVIOUS_VALUE

  WHEN THE NEXT_VALUE IS NOT NULL, THEN NEXT_VALUE

  END

  END AS NEW_VALUE

  OF GET_VALUES

  /

  HTH

• the hidden value of param - after restarting SQL Developer

  I would like to know if there is a way to make this type of permanent change:

  the hidden value of param querySynonyms = true;

  
  

  This means that the value set in the statement persists even after I restart SQL Developer.
  

  There are "Include synonyms" option in the Code Editor-> preferences completion Insight which is equivalent to querySynonyms = true;

• How to find duplicates of a field value? For example - in a field, I have values like {123,345,346,123}, now I want to remove the duplicate value in the field so that my output looks like {123,345,346}

  How to find duplicates of a field value? For example - in a field, I have values like {123,345,346,123}, now I want to remove the duplicate value in the field so that my output looks like {123,345,346}

  If it's an array you want to deduplicate then here is a script [for use in the Script Processor] I prepared earlier:

  var result = new Array();

  var added = new Object();

  If (input1 [0]! = null)

  {

  for (var i = 0; i)< input1[0].length;="">

  {

  var point = input1 [0] [i];

  If (! added [item])

  {

  added [item] = 1;

  result [result. Length] = item;

  }

  }

  }

  Output 1 = result;

  Kind regards

  Nick

• Need to remove the advanced values in VMX file

  Former Director elected to harden all VMs VMX files in order to avoid interruptions in service unwanted individuals manual installation of the VMware tools upgrades.

  I agree with him and understand in previous versions, it was a good idea to disable these but now with 5.1 with the fact that we have more to restart for the modernization of the tools happen my life has become much more complicated and we constantly have problems with VM with mounted tools and no way forced to disassemble the tools.

  I am looking for PowerCLI script to remove these advanced values in the VMX file for all the virtual machines attached to a vCenter. I guess these are the following values:

  isolation.tools.autoInstall.disable = true

  isolation.tools.guestInitiatedUpgrade.disable = false

  insulation. Tools.connectable.Disable =true

  If there are other values that I should check, please let me know and I will review the VMX file.

  This is another option, but lines will remain in the VMX, albeit with different values

  You can do it with this script

  $vm = Get-VM -Name MyVM
  
  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec$spec.tools = New-Object VMware.Vim.ToolsConfigInfo
  
  $extra1 = New-Object VMware.Vim.OptionValue$extra1.Key = "isolation.tools.autoInstall.disable"$extra1.Value = "false"$spec.ExtraConfig += $extra1$extra2 = New-Object VMware.Vim.OptionValue$extra2.Key = "isolation.tools.guestInitiatedUpgrade.disable"$extra2.Value = "true"$spec.ExtraConfig += $extra2$extra3 = New-Object VMware.Vim.OptionValue$extra3.Key = "isolation.tools.connectable.disable"$extra3.Value = "flase"$spec.ExtraConfig += $extra3
  
  $vm.ExtensionData.ReconfigVM($spec)
  

• How to remove the decimal value (. 00) of the slider control

  Please ask me how to remove the decimal value (. 00) of the slider control and Add (if possible) % in after effects cs6.

  I guess you mean to animate text with a slider.

  Add a slider (options for expressions) to your text layer and then add this expression in your Source text:

  x = Math.Floor (effect ("Slider Control") ("Slider"));

  x+" %"

  That's all

• Remove the default value drop-down list

  I am currently working with Acrobat Pro XI version. I want to know if it is possible to remove the default value in a drop-down list.

  When the list less than 4 elements, it is possible to deselect the default value by pressing the spaces below. However, when there are no more elements, it is more possible.

  I read that you need to include white space as a component in the list of elements, however, then you will see an empty list item when people work with the pdf that is not preferable.

  So, nobody how to remove the default value in a drop-down list?

  Thank you!

  OK, I found a perfect solution to my problem by using FormsCentral for Acrobat. Here's what you need to do:

  Step 1:

  -Open FormsCentral

  -Create new form (choose the blank form)

  -Click the drop-down menu to create a new drop-down list

  -Fill out the items in the list by clicking on the timeline (you can also add a label if you want)

  -Click on: file > save as PDF form...

  Step 2:

  -Open the PDF saved (you will now see a blank pdf with a menu drop-down)

  -Click on: Tools > forms > Edit Form (when a pop-up window indicates that you should save a copy of the document in order to make changes, press 'Save a copy' and open the file with Acrobat pdf copy)

  -Select the drop-down list, the drop-down list to copy and paste it into the desired document

  Now you have a drop down without a default choice. Remember that you can not change the items in the drop-down list, because we will choose a default choice and you must use the copy pdf file once again. As long as you do not click on a list item, it is not choose a default choice.

  It is not a perfect solution, but it works for me.

  Good luck and thanks!

• REMOVE THE DEFAULT VALUE

  I'm using oracle 11g.
  
  I created the table
  
  SQL > create table test2 (name varchar (20) not null);
  
  Table created.
  
  SQL > alter table test2 change (name default "vir").
  
  Modified table.
  
  
  now, I want to remove this default how do?
  
  Thks

  Try this

  ALTER table test2 change null by default name

  and read

  How to remove the default value

• remove the threshold values of table

  Hello

  I would like to get help to complete my program where I am removing values above a threshold in a table and establish the curve according to the values above the threshold (from-45 in this case) is deleted.  I still seem to have a few values greater than the threshold that appears in the desired graphic.  Any help is greatly appreciated.

  Thank you

  hiNi.

  Your VI is extremely complicated. All you need is a conditional tunnel.

• Removal of artifact values and outliers

  I am a researcher behavioral learning just Labview. I just bought the full professional development program after using the express signal and a DAQ card for 2 years. I now have hundreds of collected files I want to automate the process to create a program to deal with the new collections of data. I was able to create some of the steps but am really difficulty out bad data first. I tried many examples found on the forums and in the books - but my inexperience showed. I hope someone can help me past this stage (and if you have suggestions for future steps, so much the better!).

  My signal comes from an actocardiograph machine that records two signals on the same time scale: fetal heart rate in beats per minute (in general 100-190 BPM) so no wave QRS, just a measure doppler signal not electric) and a second signal of activity in arbitrary units (0-100). Movement is present throughout the recording of the heart rate signal. I need to remove the artifact and interpolate if possible.  I can't get one of the screws to process the signal for this - and I think its because I don't know who agrees to use or how to configure correctly. There are also cases of artifact I need to remove it completely following the intervention of my ultrasound that is in this range, but clearly a pattern of a stable bpms 146-148.

  Suggestions or examples of exactly HOW to use screws such as the removal of outliers (for example how to specify the upper and lower part go to the values Y of 100 to 190) or Wavelet would be GREATLY appreciated!

  
  

• remove the negative values in table

  I have a table 1 d of data depending on the positive and negative values. I'm trying to search for negative values and remove them from the table.  This corresponds to the data in the column in the second table 2D that should also be deleted. A minor problem is that there are an additional column in the 2D array that must be skipped.  I have the code that should do it.  The problem is that if I have two negative numbers in a row the code doesn't thow on the other.

  This first picture is the answer I get when alternate positive and negative values.  It shows the correct answer.

  

  When I change the first1 of the positive a-1 value as shown below...

  

  ... I get the following response.

  

  FYI, some other things such as conversion are here because I'm trying to manipulate the actual data set is enormous.  I test everything I do with the numbers that I can actually follow before I apply in my real program.  That's why I do extra things.

  Thanks for the help!

  Here is the solution, that increase the index when you do not remove an element. In addition, whether you use the "less then or equal" when you use the "lower to."

  

• Removal of hidden files

  Hi all

  I want to remove a few hidden files on the SD card.

  Senario: there is a file 'A', that there are 2 files, which one is hidden.

  {I have written a function in which he deletes files and technology removes the parent too (e.g. 'A' in this case) folder, in this function, I put one if block like 'if (fconn.isHidden) {fconn.setHidden (false)'} so that she will do this not hidden hidden file and which will remove, but his does not work, he simply deletes the other file which is visible and it also gives the exception as directory not empty while record of deletion due that hidden file.

  In the other case, if I put the two files normally in the folder, no it deletes all the stuff and the parent folder also, but in the case of folder of hodden it does not, the hidden files

  Is it possible to do?

  Please let me know!

  Thank you...

  Maybe you can use fileconnection.list (filter, includeHidden) to list the hiddent files.

• Remove the hidden in one appointment - 7 Captivate Slides

  Hello community, I used to screens to hide instead of remove them during a project. Helps a lot when you deleted a screen by accident.

  Is it possible that I can delete all slides hidden at once? I googled and searched this forum without success. I have a suspicion that it is not possible.

  Greetings from sunny South Africa.

  No, I don't think there is a way to do it. Maybe log a feature request.

  You probably know that hidden slides have no effect on the publication

  size of the file?

  On May 9, 2016 09:53, "asProfile restore 2010072.

• Remove ' / ' with a value of feld to create two rows

  I have a table with a structure like
  
  CREATE TABLE TEST
  (
  MOLDCODE VARCHAR2 (20 BYTE) NOT NULL ACTIVATE.
  PRODCODE VARCHAR2 (255 BYTE),
  DIAMCONTAINER NUMBER (4.1).
  SEGMENT NUMBER (2.0)
  )
  
  And it contains data such as
  
  MOLDCODE PRODCODE DIAMCONTAINER SEGMENT
  
  ADE16920-1 CJ02A/SD51A 96 10
  ADE20206 CT25A 95 8
  ADE16912-1 DG31A 57 10
  ADE16913 AS30A/DE28A 96 10
  ADE17845 CJ24A/SD36A 96 10
  
  
  I want to create another table saw which will remove / of prodcode and he will separate the values and forms two rows with the same values for the other fields.
  for example.
  
  Source: -.
  MOLDCODE PRODCODE DIAMCONTAINER SEGMENT
  
  ADE16920-1 CJ02A/SD51A 96 10
  ADE16913 AS30A/DE28A 96 10
  
  Purpose: -.
  MOLDCODE PRODCODE DIAMCONTAINER SEGMENT
  
  ADE16920-1 96 10 CJ02A
  ADE16920-1 96 10 SD51A
  ADE16913 AS30A 96 10
  ADE16913 DE28A 96 10
  
  Is it possible?
  Need help for the same thing.

  Check this box:

      SELECT moldcode,
             REGEXP_SUBSTR (procode,
                            '[^/]+',
                            1,
                            LEVEL)
                procode,
             diamcontainer,
             segment
        FROM t
  CONNECT BY     LEVEL <= REGEXP_COUNT (procode, '/') + 1
             AND moldcode = PRIOR moldcode
             AND PRIOR SYS_GUID () IS NOT NULL;
  

  See you soon,.
  Manik.