Remove drivers

Similar Questions

• whenever I have stop storage usb mass, all the removable drivers disapered

  ho I fix

  Hi jeanalonso,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. how to stop mass storage devices?

  If you use material to stop the mass storage device, then make sure that you stop the device required by double clicking on mass storage and more by selecting the required device to stop withdraw.

  If the problem persists after you follow the above then check out the link below and run them the troubleshooter available, check if it works.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion DV6 video drivers problem

  Hello world

  I bought a HP Pavlion DV6-6C52EL, last year, with Windows 7 pre-installed. After two months I have upgraded to Windows 8 and now to Windows 8.1 (I did a new install of Windows 8 and an upgrade from 8 to 8.1).

  But I have some problems with the video drivers. In particular, each time I get an error message about 'Application of the load MMDriver. First of all, I must say that my VGA is an AMD Radeon 7470 M + the built-in Intel HD 3000 (my processor is an Intel Core i5).

  So I uninstalled the video drivers (the AMD and Intel VGA drivers) and reinstalled the new on the HP Support site, but they are for Windows 8 (not for the 8.1) and not updated. in fact, I always get the error message, and I see that the AMD Radeon 7470 does not work. Only the Intel HD 3000 jobs. In Device Manager, I get the error Code 43 on the Radeon. Suggestions? I've already updated the BIOS to the latest version, without success. Should I downgrade to Windows 8 or 7?

  HP, please update your drivers for Windows 8.1.

  Thanks in advance for your help.
  

  12/15 PATCH: Finally, I have completely solved the problem. Now, both the VGA and the brightness adjustment work perfectly.

  After numerous tests, the pilot plants and the facilities (and a lot of patience ), I would like to share my solution for users with my same problem.

  Before you begin, please check the HP support Site if Windows 8.1 drivers are now available.

  • If Yes, you will get your graphics card works only by installing the proper drivers.
  • If No, please go to read this post.

  ==========================================================================================

  -If you plan to make an own 8.1 Windows Installer, just download the Windows 8 drivers for Intel HD integrated graphics card and the dedicated graphics AMD Radeon on the HP's Support Site and install them. They must work immediately.

  -If you have updated your system to Windows 8 Windows 8.1, as in my case, you may have some graphic problems. I'll show you how to solve these problems step by step.

   

       1. update your BIOS to the latest version available. Download from the Official Site of HP Support.

        2 uninstall the driver of Intel's integrated graphics and the dedicated Control Panel AMD graphics card driver. Do not restart your PC.

        3 using the free tool Display Driver Uninstaller (search on Google for the latest version), clean the registry keys and system files to completely remove drivers AMD. Restart your PC now.

  4. download the HD Graphics of Intel and AMD Radeon drivers for Windows 8 on the HP Support Site, but only install drivers from Intel.

        5 enter the BIOS Setup and change the mode of "Switchable Graphics"on"fixed".

   

        6 now install previously downloaded AMD Radeon drivers and reboot your PC.

  When you restart Windows 8.1, you should get the fully functional Radeon; check in the Device Manager to see if it's ok. If this isn't the case, please follow my guide illustrated in the 'Update 12/08' above post and try with that.

  You have now (finally!) the Intel and AMD Radeon graphics working with the brightness setting.

  Thanks anyway for users who have tried to help me.

  * NOTE: Those not worked for me, for my setup (Intel Core processor i5 2450 M with Intel HD 3000 and AMD Radeon 7470 M) so use these guides at your own risk. I decline all responsibility in case of problems or malfunction of your system. *

• Unable to load device drivers - says code: 39.

  Should I uninstall and reinstall the drivers? Or what is the best course of action.

  Thank you

  David

  Hello the Kentucky Derby,

  Thank you for your message.  Yes, try to remove drivers that are installed now and reinstall new drivers from the website of the manufacturer of the computer.  If you continue to have problems, please respond with your computer model and the material that you are having problems with.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photomart D110 all-in-one cannot install drivers

  I can't get the disk to load the software on my laptop Toshiba P500 windows 7, brings it to the top of the screen that says to continue with the installation it is necessary to restart the computer to remove the files. The installation screen that gets only a distance on restart and then tells you to reboot to remove the files again. The installation will not past the scene of the computer control. I tried to download the drivers and software from the HP site but the same problem occurs. I was able to load to load all the software from the disk on my old laptop XP with no problems.

  The plug-and-play usb on the Toshiba also does the same thing, it detects that there are no drivers for the D110 and when Windows downloads drivers installation fails exactly in the same way. Any ideas out there?

  As I was scrolling through solutions for the other all-in-one on another thread I seem to have found the solution. I managed to install the drivers to do printing via a USB cable, but nothing else. After you remove the D110a of devices and printers, then click another device and select the print server properties. Select the driver tab and select the drivers D110a and select Remove. Click on remove drivers and driver package. Restart the computer after the driver and the package is deleted. Then load the software from the cd.

  I wish I could remember which thread was here, but everything worked fine after that.

• Windows 7 Upgrade Guide for dv6000/dv9000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models are not officially supported

  with Windows 7.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5 users with nVidia graphics card should check the temperature of this device before upgrading.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  How do you know what model you have and the specifications for it:

  1. click on the Support & drivers link. (The upper part of this page).

  2. in the search box, type your computer laptop product (p/n) number.

  Resources:

  How to locate the laptop n/p

  3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).

  4. on the same page, click on Product Information -> specifications and you will find all the information on

  your little laptop.

  How to install Windows 7 and what you need to know during the upgrade:

  1 guide: How to do a clean Windows 7 install

  2. all drivers for Windows 7, you will find in the next post below.

  3. some drivers have comment while they are initially made for Vista system.

  During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,

  Windows Vista Service Pack 1 and Windows Vista Service Pack 2).

  Resources:

  Make older programs in this version of Windows

  How to run a program in Compatibility Mode in Windows 7

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):

  nVidia Chipset (Install and reboot before other drivers) here   (Vista) 

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then until you install the other version will be

  you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller

  ( process):

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  Realtek HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).

  "" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  
  
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS

  worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Lack of wireless connection continues

  I just bought a new laptop.

  The problem I have is keeps him without cutting wire. I think its something to do with the free Config software that has been installed on it. I can connect using the config of fancy free stuff, but the connection will go just every 10 minutes or more. Thanks to the tools of wireless connection of normal windows that lists your wireless settings it says I am not connected to my wireless, but if I try to click on it it says that I'm disconecting from him. I think what is happening is normal windows wireless attempts to connect every time that a whilse and it disconnects me free of config. Bottom right the ICO wireless normmal says not connected and free config says that it is connected. When the dialog box appears and says "can not conntect to your favorite network" he cut my connection.

  Help! It's driving me crazy, if I thought that I could just remove free config and use normal windows stuff then I would but disabling, it left me no internet at all and I'm afraid to remove drivers, or something important.

  Maybe someone could provide a solution because of you, but I doubt that this would be not possible without knowing the right laptop model and the preinstalled operating system

  In addition, I put t understand why you use Configfree to connect WiFi, you can use this tool for diagnosis offers, but if you want to establish the WiFi connection then I recommend using WLan parameters of Windows or the Intel ProSet utility (if card Intel WLan) or Atheros Wlan Utility (if Atheros WLan card.)

  PS: update driver WLan if possible...

• HP 5550 starts printing then feeds on blank paper

  My HP Laser Jet 5550 worked fine with XP for a year. Now when I try to print it feeds just a white pice of paper.

  I tried on two other PC's and it works fine.

  HP software it will be priny a test page, but every thing IE pictures, word etc documents he spits right on a blank page.

  I tried to UN install it remove drivers and printer then reinstal and nothing works.

  Found a thread which solved my problem. Is is turned out to be setting DEP, Data Execution Prevention windows has been changed.

  http://h30434.www3.HP.com/PSG/board/message?board.ID=software & message.ID = 583 & query.ID = 73476 #M583

  Turns out that what is called Data Execution Prevention setting has been changed.  Not sure how this has changed, perhaps on a recent update from MS, not sure.  In any case, go to control panel-> system-> advanced-> Performance, then select the setting button. In Performance Options, select Data Execution Prevention, and then select the radio button top of page "enable DEP for window essential programs and services only."

  Message edited by CZAR on 23/04/2009 15:14

• Bought P7-1154. Added GeForce GTX 560 Ti.

  Now, I get a popup the integrated AMD Radeon driver not compatible with the new driver.  Is there a way to disable the built in the integrated video card but does not disable anything else on this system?

  Hello

  You need to remove drivers from your PC AMD - see the link below for more information on how to do it.

  http://support.AMD.com/us/KbArticles/pages/GPU57RemoveOldGraphicsDrivers.aspx

  Kind regards

  DP - K

• Sony SVT11215SG wireless keyboard does not.

  Hello

  I recently bought a SVT11215SG - http://www.sony.com.my/product/svt11215sg
  Everything was working fine, no problem, upgraded to 8.1 Windows smoothly.

  But a few months later, all of a sudden the wireless keyboard doesn't work.

  I have tried almost everything to get it working again, but nothing has worked so far.

  Here is a list of things I've tried:

  1. use the Matchmaking tool. (Got an error saying "Failure get the handle to the dongle".

  2 reset the default BIOS settings.

  3 reinstall Bluetooth drivers and wireless.

  4. manually remove drivers from Device Manager and reinstall.

  5. use the Sony Vaio Care to get the latest updates.

  6. download and install the updates manually from here.

  7. check Windows Update for optional updates.

  Please help, I really need to get the job of keyboard.

  
  

• Tecra M11: How is 1080i/p of DisplayPort?

  I hung my Tecra M11 via one-adapter mini DisplayPort to HDMI on my TV, but it seems that the best he can do is 800 x 600! (WIndows XP)

  How can I get 1920 x 1080 on this laptop?

  Remove drivers Intel?
  Add new drivers Intel?
  Patch from Microsoft?

  Is it possible to also output audio HD via this port?

  Other laptops with ports HDMI can do everything above, why don't the M11?

  So, you have all the rights HD TV?

• How to install this update and resolve problems of USB and the touchpad?

  I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
  Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

  The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

  The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

  This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
  Driver revision history:
  Twinhan VP704A Driver Release Notes
  -------------------------------------------------------------------------------
  Note:
  1. in the event that the system hangs when running with VP704A, please install ULI
  Host USB 2.0 in \ULiUSB20Driver driver

  2. for XP/SP1, please update with the patch in
  

  3. in XP/SP1, update driver will crash the system, while the new facility is ok.
  The trick to update driver XP/SP1 is illustrated in the following steps,
  a. uninstall the driver
  b. disconnect and reconnect the USB device
  c. install the driver
  4 to support the controller remotely, please launch Agent.exe in \Agent.
  Further details at \Agent\Readme.txt

  Known issues:
  1 multi-instance is not supported
  2 remote wakeup is not supported
  3. strong use of the processor from analog video/audio capture
  4. bad Signal using color YUY2 format IST
  5 AV sync if audio captured the wrong filter.
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
  6. noise with analog TV and FM Radio
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

  Driver revision history:
  -------------------------------------------------------------------------------
  2005-10-24, version: 1.0.2.8
  Bugs fixed and new features:
  1 is not correctly configured.
  -------------------------------------------------------------------------------
  2005-10-21, version: 1.0.2.7
  Bugs fixed and new features:
  1. the firmware version read FLASH OK!
  -------------------------------------------------------------------------------
  2005-10-14, version: 1.0.2.6
  Bugs fixed and new features:
  1.MUtil - access driver empty part lower part of screen when IST!
  2.MUtil - access HCT pilot check fix crash!
  -------------------------------------------------------------------------------
  2005-10-07, version: 1.0.2.5
  Bugs fixed and new features:
  1 tuner turns off when S-Video, Composite.
  -------------------------------------------------------------------------------
  30/09/2005, version: 1.0.2.4
  Bugs fixed and new features:
  1.agent.exe update for repeat bug!
  2.TI5150 sign up to fix video Format!
  -------------------------------------------------------------------------------
  2005-09-29, version: 1.0.2.3
  Bugs fixed and new features:
  1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
  Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
  2 reset TI5150 when a new frequency is defined
  -------------------------------------------------------------------------------
  2005-09-27, version: 1.0.2.2
  Bugs fixed and new features:
  1. difficulty I2C unstable access on some devices.
  -------------------------------------------------------------------------------
  2005-09-23, version: 1.0.2.1
  Bugs fixed and new features:
  1. analog TV becomes sometimes darker.
  -------------------------------------------------------------------------------
  15/09/2005, version: 1.0.2.0
  Bugs fixed and new features:
  1. difficulty of installation INF for Windows 2000.
  2 FM scan radio policy changed!
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.9
  Bugs fixed and new features:
  1 USB string serial number not visible with USBView, updated firmware required.
  2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.8
  Bugs fixed and new features:
  1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
  -------------------------------------------------------------------------------
  12/09/2005, version: 1.0.1.7
  Bugs fixed and new features:
  1. improve the performance of check channel lock status
  2 pinnacle INF Fix.
  -------------------------------------------------------------------------------
  2005-09-09, version: 1.0.1.6
  Bugs fixed and new features:
  1. Add an audio initialization function.
  -------------------------------------------------------------------------------
  2005-08-31, version: 1.0.1.5
  Bugs fixed and new features:
  1 separation of PAL and NTSC resolution mode.
  -------------------------------------------------------------------------------
  2005-08-30, version: 1.0.1.4
  Bugs fixed and new features:
  1.AvgTimePerFrame.
  2 frame drop.
  3 pinnacle inf file HCT chkinf fail.
  -------------------------------------------------------------------------------
  2005-08-22, version: version 1.0.1.3
  Bugs fixed and new features:
  1. add remote control interface in digital source filter.
  2.A new remote test tool that contains of the source code in \Test_RC.
  -------------------------------------------------------------------------------
  2005-08-16, version: 1.0.1.2
  Bugs fixed and new features:
  1. Pinnacel & Twinhan driver & file reorg.
  2.VP704A_BDA_Test tool, add a test to the system code.
  3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
  4 firmware update
  -------------------------------------------------------------------------------
  2005-08-15, version: 1.0.1.1
  Bugs fixed and new features:
  1 serial number feature is lost when the audio volume of the TV control
  2.RC6A support CIR
  (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
  The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
  EEPROM must be flashed with \Firmware\M9207.bin)
  3 Serieal, MAC address and name of device OEM taken in charge.
  Please see for more details on the \Firmware\readme.txt.
  4 Ioclt example source code included.
  -------------------------------------------------------------------------------
  08/08/2005, version: 1.0.0.10
  Bugs fixed and new features:
  1. increase audio volume analog TV.
  -------------------------------------------------------------------------------
  04/08/2005, version: 1.0.0.9
  Bugs fixed and new features:
  1. analog TV Video mode failed.
  -------------------------------------------------------------------------------
  2005-08-03, version: 1.0.0.8
  Bugs fixed and new features:
  1.off - centerf frequency scan + / 125Khz
  2 difficulty program a copy scanned in MCE.
  -------------------------------------------------------------------------------
  02/08/2005, version: 1.0.0.7
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.6
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
  2. improve the stability of I2C communication.
  3 unify signaling resistance & quality as a THBda ioctl interface.
  4 capture filter lock state control.
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.5
  Bugs fixed and new features:
  1. the same strength & quality signals as VP7046.
  2 debug build pilot
  -------------------------------------------------------------------------------
  2005-07-21, version: 1.0.0.4
  Bugs fixed and new features:
  1. put the INF update.
  -------------------------------------------------------------------------------
  2005-07-20, version: 1.0.0.3
  Bugs fixed and new features:
  1 improve performance in PCM4
  2 passage of the analog TV Mode to FM Mode failure
  -------------------------------------------------------------------------------
  2005-07-04, version: 1.0.0.2
  Bugs fixed and new features:
  1. production tool FM test OK!
  --------------------------------------------

  And here is the Readme file from the other file in the update?

  ************************************************** ************************************************
  ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
  ************************************************** ************************************************

  ----------------
  INTRODUCTION
  ----------------

  This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
  and Windows XP.

  -------------------------
  CONTENTS OF THIS DOCUMENT
  -------------------------

  1. installation instructions
  2. uninstall instructions

  ----------------------------
  1. installation instructions
  ----------------------------

  (Windows 98SE & Windows ME)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files in your Windows system, and then restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files to your Windows system, then turn off your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows 2000)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows XP)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -Click "NEXT".
  -This program will install and load the driver and you do not have to restart the
  computer.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller', proceed with the installation.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.

  Notice:
  If you can not configure driver successfully. Please restart your system, then follow
  steps to reinstall driver above.

  ------------------------------
  2. uninstall instructions
  ------------------------------

  1. open the "Control Panel" folder.
  2 call the "Add/Remove Programs" icon
  3 choose the "ULi USB2.0 Driver" section.
  4. click on the "add/delete" button to remove drivers.

  -----------------------------------
  Change list:
  -----------------------------------
  1.74
  1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
  2. support all USB2.0 Host Controller.
  1.73
  1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
  2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
  3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
  4 solve problem as wirless lan will disconect when the plug in usb device.

  1.72
  1 fix that system crash when HD USB copy large files.

  1.71
  1. improve the management of power in Win98 / Me.

  1.70
  1. improve the devcie detection function.

  1.62
  1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

  1.61
  1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

  1.60
  1. in support of functions power management when a HUB with the USB plug in device
  a root HUB.

  1.57
  1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
  2. fix audio problem that can not display smooth when peripheral USB connect to the system.
  3. fix system cannot detect DVICE USB when the USB device attached to the system in
  suspend mode.
  4 fix when root USB HUB have a full load, USB HD sometimes
  failure of the transaction.

  1.56
  1 fix that device of DVD decoder cannot display correctly.

  1.55
  1. fix OTI USB 2.0 drive hand cannot detect question.
  2. attach the USB mouse cannot be used after the resumption of hanging.

  1.54
  1. to improve the safety of the driver.

  1.53
  1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
  2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

  1.52
  1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
  automatically fix file system errors
  2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

  v.1.51
  1. to improve the compatibility of USB 2.0 card reader.
  2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

  v1.50
  1. improve the transfer block

  v1.48
  1. difficulty of installation of the USB 2.0 LAN driver hangs up
  2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
  3. fix some laptops starting hanging Win98SE

  v1.47
  1. improve the performance of bulk transfer.
  2. fix the failure of USB 2.0 Preview in bulk webcam.

  v1.46
  1. support USB 2.0 and 1.1 devices isochronous
  2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
  3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
  4. improve the capacity of the device detection in Win9X / ME

  v1.45
  1. fix system hang up when the mode standby ACPI.
  2. attach the mouse sometimes does not disappear when it is unplugged.
  3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

  v1.44
  1. composite crutch
  2 improve the detection of devices

  v1.43
  1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
  2 difficulty at high peripheral speed detected as full-speed device
  3. fix some problem of failure detection USB mouses
  4. fix some problem USB 2.0 Hub failure detection
  5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

  v1.42
  1. fix PC Card eject hang up in Win98 / ME
  2 difficulty of interruption/resumption hang up in Win98
  3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
  4. fix some failure detection of PC Card USB 1.1 devices

  v1.41
  1. Add new feature that system can install the driver ahead of the device is plugged in.
  2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

  v1.40
  1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
  2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

  v1.32
  1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
  If the path of the OS is not c:\windows.
  2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

  v1.31
  1. Fix problem that driver cannot install on Windows 2000.

  v1.30
  1 fix than Win9X / shows ME no USB 2.0 hub.
  2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
  3 Fix problem that sometimes when you click on "search the hardware changes.
  for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
  file is not found.
  4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
  verison of ULi EHCI controllers devices are connected and disconnected.
  5 install the driver support for several features of controller EHCI ULi existing on
  system at the same time.
  6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

  v1.20
  1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

  ULi Coporation. (ULi) web sites:
  http://www.Uli.com.tw/ (Taiwan)

  CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

  I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

  It is said above 2 relevant and 1 right ANSWER available...

  I'm new here, so anyone could direct me to these answers?

• Windows 7 Upgrade Guide for dv2000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models do not have their support

  with Windows 7 system.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers for Vista and preinstalled by HP software for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5. users with AMD processors have indicated that their models dv2000 were very quickly overheated after installation

  Windows 7. So if you want to install this system and you have this processor to remember about this and be hypersensitive

  on this issue.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  CherylG (one of the best HP forum contributors who has model dv2000) has solved this problem by installing Windows

  Updates.

  Resources:

  How to install Windows updates

  6 If your model has nVidia graphics card then please check how high temperature this device possesses under

  Vista. In this way you will know is it works fine under Windows 7 also.

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then before you install either version, you will need

  first of all to remove old drivers from your system. Check below how guide do (that's not standard

  ( uninstall process) :

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 7150 M, 7200 M:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  Marvell Yukon 88E8039 Lan here (ver 10.70.5.3 for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use a finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  Alps TouchPad

  Install driver through Windows Update:

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for Alps TouchPad.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software here (ver 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Graphic editing section of 31/03/2010 update nVidia with uninstall guide, updated drivers for nVidia GeForce 8400 M GS to worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Published 24/06/2010 updated published 14/12/2011 updated Intel® Rapid Storage Technology driver

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Drivers added edited 04/01/2011 for nVidia GeForce 8400 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Beats Audio does not envy Touchsmart d039 23 after updates

  Nice day. I had problems with my wifi and bluetooth after than the 8.1 Windows update, but no problems with Beats Audio. After all the updates to automatically download for HP, it seems to have solved many problems, but now my new number is the Beats Audio does not work. After extensive research of the forums that I could find my Beats Audio Control Panel, however it does not engage and the its totally sucks now on my computer.

  Please help, is there a driver, the trick or the series of steps I can do to get this working?

  Thanks in advance

  M

  Hello

  Open Control Panel, Manager of devices.

  Expand sound, video and game controllers.

  Right click on IDT HD Audio

  Select uninstall. You may receive a prompt to remove drivers from your PC. Check this option.

  Restart your PC.

  Windows download and install bat if you have an Internet connection always on. Otherwise, open Windows updates and check the updated optional codec IDT.

  Download and install IDT.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• Satellite M30 - keyboard does not work

  Hello

  I have a problem with the keyboard of my laptop:
  Since I was able to type the password of the BIOS, it should be correct from a technical point of view.
  But once having written the pass BIOS keyboard no longer works. It just doesn' react - it is even impossible to hit F2 to open the BIOS menu.
  XP / system displays all hardware conflicts.
  The laptop do not fall down or something like that.
  I bought a USB keyboard, and it worked correctly from the start.

  I tried every shortcut I know and a lot I didn't know until now, but it still does not work.

  Is there a shortcut XP or Toshiba to disable the keyboard?
  Or do you think this could be a hardware problem - but why it should be possible to write the password...?

  CU
  Matthias

  [Edited by: admin on 22 July 05 18:02]

  (1) your bios can recognize an external input device and causing the keyboard not working after giving you access.

  (2) remove all other usb devices you have connected (mouse, webcam or other) because they could be interpreted as an external keyboard

  (3) if there is no USB device connected and the problem persists... remove your keyboard drivers external usb while you plug it (remove drivers dethrone device) and before you restart your computer, make sure to remove the external keyboard.

  (3) you can have a software virus recorder or a keyboard that connects to the interruption of your keyboard.

  If none of these permits, try to boot in an o/s different as the knoppix linux that runs directly from cd without need of installation. If your keyboard did not always works, then bring it to support, because the internal flat cable might came down in part.

  Good luck

  George