remove the base

Similar Questions

• Can I remove the base of an iMac of 2013?

  I read that the later models of iMac, (I have a 2013) the base cannot be deleted.

  I need to lower my iMac, either by removing the base and attach a mount,

  'He' placed on a support of ledger, or some kind of support.

  Any suggestion would be appreciated.

  Thank you!!

  RM. Austin

  Unfortunately, the answer is no, you cannot remove the base. It is affixed permanently on the computer chassis. However, you can find third-party wall brackets. For example, https://www.ergotron.com/portals/0/html/AppleAdapter/VESAguide2.html

• A740 - remove the Base cover

  Hello

  I am trying to remove the cover of a model A740, but it seems virtually impossible. The coverage seems to be one piece and will be simply not to remove. Equipment, manual, in this case, doesn't give me all the tracks. Someone at - he had luck with this and that could possibly help?

  Thank you

  Petter

  Problem solved!

  You must remove the rubber feet on the base. Below, you will find the 4 remaining screws that must be removed before you can remove the base of the cover.

  You can use a small screwdriver to lift loose rubber feet. They will be set to the base once you are finished.

• How can I remove the base on a screen LCD S232HL?

  I am moving and you need to remove the base of a screen LCD S232HL can anyone help?

  I think you have to shoot, place the monitor on a flat surface with a cloth under the screen to prevent scratches and pull on the base.

• Accidentally that hidden/removed the base Panel (the one with the shadows, made highlights, contrast, exposure) to develop module. I was clicking on the exposure slider when my mouse slipped and I clicked on something. How to do back panel?

  Accidentally that hidden/removed the base Panel (the one with the shadows, made highlights, contrast, exposure) to develop module. I was clicking on the exposure slider when my mouse slipped and I clicked on something. How to do back panel?

  Make a right-click on any other Panel name develop. In the menu that appears, put a check mark next to the base.

• remove the base by script files

  Hi all.. my oracle 11g generates files of basis whenever there is a problem in the whole of the structure. I managed my server db on solaris 10 machines. can u please guide me how to write a script in solaris that monitors the/U01 directory, at the frequency of 15 minutes, and if it fills up more than 90%, remove (rm - rf *) all the files in/u01/cdump base?
  I am new to solaris. any help wud highly appreciated.
  Thanks in advance

  Grand... I am really grateful for your help... I'll write and implement the work immediately (with 70%). then I willl test it by placing the data in dir... Thank you

  There are a few labels for the forum, see [Forums label / Reward Points | http://forums.oracle.com/forums/ann.jspa?annID=718]

  Thank you.

• Unit will stop dying just after removing the base

  My Palm continues to falter after that I loaded and synchronized it.  Can you replace the batteries on the devices?

  Try a search on google for "Battery Palm T3" and you will find several places that sell a replacement battery for the T3 and include instructions for replacement.

  If you don't want to do it yourself, I would go around (again, google is your friend, 'palm t3 repair' or the glance at the research of battery to see if the places that sell batteries also offer installation services).  I would bet that these types of places will be much cheaper than to go through Palm, since this unit is out of warranty and you should pay $199 to fix it through this page: http://kb.palm.com/wps/portal/kb/na/tungsten/t3/unlocked/supportservices/page_en.html

  P.S. I'm moving this to the Board, also.

• How can I remove the stand of my HP W2371b monitor?

  I try to install my monitor on a wall, and I have to get off the stand before I can.  I went down the flat part "football" with little or no question - but the real part of 'stand' will not move! I don't want to damage the monitor - I missed a tab or something?  Please notify.

  Hello MDMOM,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you want to remove the base of your HP W2371b monitor. Simply remove the screws in the image below and the base should be released.

  

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• How to remove the backup files in the rescue and recovery on local drive

  I need more space on my hard drive and for a year have been backup to a drive for expansion.  However, I kept the base and a backup on the local drive. I tried to remove the base backup, since it was listed in "show all the backups" on the "local" drive However, it still appears in 'show all the backups' - in the local drive.  I see now that I actually deleted the 'base' on the USB. I see no way to delete the backups in the local drive. How can I delete the backups to the local disk?

  RNR does support only 1 location of target, in your case, local backup or USB.

  If you change the location to the USB, it will ask "delete backups on Local.  If you say no, it will keep local backups and start on USB. View backups should ONLY list target current place of residence.  In your case, USB.  You said delete Basic, yes he deleted based on USB.

  Go to the RNR, menu, advanced and post a screenshot of the view backups.  Do not use the main pane.

  (1) change the local location.  You can remove LOCAL.  Then replace location USB.

  (2) uninstall the RNR.  This will remove \RRbackups on drive C.  Replace.

  The main panel (simple opinion) may use registry values to list all backups while the Advanced menu should list ONLY the target location.

• Triangle without the base.

  I wanted to draw a triangle without the base as one on the roof of a House. So, I drew a triangle and tried somehow to remove the base, but I have had no results. How can I do?

  Murr,

  Then drag the segment of the path with the selection background direct tool, including this anchor in the middle and press the delete key once.

  If you wish, you can get rid of the intermediate Anchor Points, simply by clicking on it with the tool remove an anchor point.

• reduce the size of the seeds by car - remove ALL except the Base and last Incremental?

  I need to make a seed for a few VMs player.  but I don't need all of the incremental backups.   Is it safe to keep only the Base and the most recent Incrementaland remove all of the incremental backups between?  I think that this will help reduce the size of the seed and speed things up.

  I think that the answer is Yes.

  jordanl17,

  You do a range to remove and do what you're asking.

• How to remove the lower cover of the Satellite S50D-B-103

  How can I open the back of my Satellite S50D-B-103 (botton)? I have to put in some more memory.

  You just need to remove all screws in the base, then place the lid off the coast.

  But you can get an ASP to do as this may void the warranty or something can break.

  www.toshiba.eu/innovation/generic/ASP_SUPPORT/

• Equium L20-264 - how to remove the DVD drive?

  Hello

  I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.

  There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.

  Any help would be appreciated

  Hello

  Please, check here

  http://www.irisvista.com/tech/

  It can help you

• Lenovo Ideapad 100: Removing the battery

  Hello, I have problems with my removing the battery. As my title says, I have a Lenovo ideapad 100, and I'm supposed to send it off for repairs. For my problem, I need to take out the battery because it is not part of the problem; However, I can't get out. I've read here to take off the base, but in trying to do this, it seems he breaks the internal clamps keep attached. I don't want to keep these break just to pay for them to be repaired afterwards. Is there an easier way to take this base off?

  Those who may be generic instructions. In the case of your machine, you can contact the Service to confirm, but my feeling is that it does not apply to batteries regarded as cards.

  Kind regards.

• Is it safe to remove the date in the name of the xml document?

  Hi, the iTunes library xml document is titled "iTunes Library" 2015-07-11. Is this correct and problems can occur if l remove the name date?

  L ask because my Sonos system has trouble with importing iTunes playlists and they are suggesting that the document name length perhaps the question.

  Thank you

  This file is a copy of the database (.itl) iTunes created by iTunes, during an update.  The XML version of the library is always called iTunes Library.xml.  Is there is no basis for comment by Sonos, that it may be related to the length of the absolute path of the XML file - where it is on your system?