Remove the Table of contents of a Quiz

Similar Questions

• Remove the length of time of the table of contents

  Hello

  I am using Captivate 4.

  We add TOC in our movies and want to remove the length of the table of contents, as shown below:

  

  I tried to uncheck the checkbox 'Show time' located in the 'skin TOC settings' dialogue, but it did not work.

  Can anyone help?

  Thank you

  Merav.

  Hello

  Do not insert it as a widget, but as an Animation (which is not very clear on the site of Michael). You can simply ignore the warning of _root. It works very well. Sorry I forgot to explain. You need to verify that your PC is AS2, however, it does not work in AS3.

  Lilybiri

• removal of table of contents and the interface on dps app

  Hello

  my project is to make an application using the digital publishing suite,

  When each page is a sequence of jpeg auto playing and loops ,

  keeps looping until striking to swipe to the next page and so on.

  I don't want to have to the table of contents or interface options.

  I want it to look in a digital book when the only option is to turn the page back.

  don't you think it's possible?

  thanx

  Yes, there is a solution that will allow you to avoid show nav bars. You create a slideshow full invisible screen on all pages that are selected by scanning and tap. In this way, when the user clicks anywhere on the page, it interacts with the slide show but seems to have no effect on the user. You must add on the top of the slide show navigation buttons so that users can access other items.

• Recording on DVD - "Unable to retrieve the table of contents" error

  Hi all

  Whenever I try to record on a DVD a face "could not retrieve the table of contents.

  I tried to change the recording speed, but no use.

  When I go to properties of DVD and click on activate record it does not recognize the DVD or any CD in the drive.

  Please help

  Hello

  1. what software to use to burn cd/dvd discs? Try using Nero, Ashampoo burning studio, alcohol CD and DVD software of engraving,
  2. then, I advise you to use high quality as TDK or Verbatim media.

  3
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait for the CD/DVD drive would appear once again

  If your problems persist, there may be a problem with your cd/DVD-ROM

• filter does not work in the table of contents of VMS 2.2

  I created a filter rule in the table of contents to remove some false positives on an ids sensor, the event still shows upwards, what should I check to solve the problem?

  You can change the filter on the sensor through CLI or IDM.

  Connect to your sensor via its C & C interface with your browser to this address "https://".

  After logging in, click 'Configuration'-> 'Detection engine'-> 'event filters ".

  This should bring up a list to update your filters. From this location, you can change or add a filter.

  Hope that helps.

  Don

• RoboHelp 2015 (12.0.2.384): The search returns topics do not are included in the table of contents

  ENVIRONMENT: Windows 7 Enterprise SP1, 8.00 GB of RAM, 64 - bit OS, Office 2010, Adobe Acrobat X Pro, Acrobat Reader DC 2015.017.20050

  DESCRIPTION OF THE PROJECT:

  • A single RoboHelp HTML project with three exits. One of the outputs is a 'validation' reference that has its own Table of contents.
  • Validation reference Table of contents contains a subset of the subjects in the main help system. For example, the help system main table of contents contains a folder named 'Administration '. This folder is not in the table of contents of reference for Validation.
  • The reference of Validation is displayed on a public web site. Therefore, we applied the tag "Non_public_info" contained in the topics shared that we do not want to appear on the public website.
  • WebHelp parameters are:
    • Validation reference TOC
    • No map file, no sequence to browse
    • Conditional compilation expression: NOT_Non_public_info_AND_NOT_StyleGuidelines_AND_NOT_TRP (we keep our Style rules in the project to facilitate access during development. TRP content must be rejected because it was not released.)
    • Exclude non referenced topics of output is selected.
    • Search options. Only 'Show Total number of search results' and 'View AND search Option in outputs' are selected.
  • After generating the WebHelp, we remove the files that we don't want (RoboHelp generates empty folders, even if the files are not in the table of contents.)

  PROBLEM: A search in the help of Validation reference reveals the topics that we think should not be included because the subjects themselves are not in the table of contents of Validation reference. For example, the section "Data quality analysis" is in the main table of contents help, but not in the table of contents of reference for Validation. Therefore, we do not expect the topic appears in the search results pane at all. But he does. When the user clicks on the subject, the "Resource not found" message appears.

  Nothing shows the topic Style_Guidelines because the StyleGuidelines label conditional construction applies to the entire folder and the "Style guidelines" book in the main table of contents. (Same thing for the TRP folder).

  QUESTION: Why are topics which are not in the table of contents and whose records are not in the project at all appearing in the WebHelp during a search? We need to rewrite the expression of conditional compilation or establish conditions differently. We assume not have topics in the table of contents, not including the topics not referenced in the output, and remove empty folders would be the way to go. Any help is welcome!

  Thank you very much.

  Carol Levie

  The table of contents does not control what ends up in the output for output online. All content tagged and tagged content which is not excluded by the expression of construction will be included. The parameter 'Exclude topics not referenced output' more exclude all subjects which are not in the table of contents AND are not related to any topic which is included in the output.

  On the other hand, for the print output the table of contents control which is found in the output. I think that it will fire a lot of people.

  If you generate the help and that you do not remove the unwanted files, do you still have the error? If this isn't the case, you know that the topic is referenced somewhere in the content of the reference of the Validation.

  Here is the help of RH11. I can't imagine it would have changed, but you could do a search to verify a second time for RH2015.

  Exclude output not referenced topics

  Select this option to exclude any topic that exists in the project, but is not the default theme in page layout or is not referenced table of selected contents, index or sequence to browse, or any referenced subject.

  Note: RoboHelp shows the topics not referenced that are excluded from the output in the output view module.

• How can I get the action to hide the table of contents to work as part of a conditional Action?

  GOAL: when a user takes the Quiz and fails, I wish they were able to get back underway and reviewing the materials before taking the quiz. As noted in other discussions, I have created actions advanced conditional and standard to achieve this:

  • Quiz results Slide Property executes the standard action "ResultsSlideVisitedAction", affecting a variable (AssessmentVisited) to 1, an indicator that the result slide has been visited.

  

  • If a user clicks the Retake Quiz button, instead of going to a "knowledge management", a quiz question classified early in the race with zero points, it goes to the first real quiz question. The slide to check knowledge runs the 'ExcludeKCAction', a conditional, looking to see if the result slide has been visited, which means that the quiz taken. If so, he jumps at the 1st question of the quiz slide.

  

  • I changed my Quiz message fail to tell the user to click the button Retake (which works fine) or navigate using the table of contents to review topics and then resume the quiz. The problem with this is that if a user uses the table of contents and gets to go to the slide to verify the knowledge to conditional action, they are sent directly to the Quiz.
  • So, I took a different tact and decided to ask the user to use a "Back in the race" button to review the course and then resume the quiz. Because you cannot add buttons to the slide of results, I created an invisible button to reset the AssessmentVisited variable to 0, so when the GET to the verification of knowledge, they are not sent for the quiz. I did this by adding the image on a button, and then by superimposing an invisible rectangular shape on top of the button image. This allowed me to add advanced invisible form actions. It worked!
  • The last thing I want to do is to hide the table of contents, so there is no chance of the user to return without resetting the variable. I tried to add the action to hide the table of contents, but it doesn't seem to work. Is this possible?  I tried to move the TOC to hide as actions of 1st, 2nd and 3rd and sill does not. Here is a screenshot of the conditional action that runs when a user clicks on my return to the button a course:
  • 

  I appreciate any thoughts on a solution to hide the table of contents as well. Thank you.

  Hide the TOC works only for OCD in overlay, you use a table of contents separate?

  With respect to the Score slide buttons, you make it very complex, it is possible since version 6: buttons on Question/Score 6 Captivate Slides?-Captivate blog

• Unlocking of the Table of contents

  Hello

  My project includes a few questions in Quiz mode.

  When you navigate to the Table of contents, the learner cannot go beyond the question until it fills the question.

  Is there anyway to unlock the table of contents so that the learner can freely navigate through the table of contents?

  I'm guessing that your answer might be "change the questions in survey mode." The problem is that mode of inquiry does not feedback 'OK!' and 'Wrong' when replying to questions.

  Is it possible to get the best of both worlds?

  Any help would be greatly appreciated.

  THX!

  Also check what setting you have under Quiz > settings > required.  If you want the user to be able to go anywhere, then you should probably have it set to optional, as some of these settings may force the user to answer all questions or even getting them correct before being able to navigate elsewhere.

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• Bookmarks does not work in the table of contents

  I have a RH 9 HTML project that was created by importing of Word documents. Each Word document has become a level 1 in the table of contents, and level of heading 2s and 3s became bookmarks in the headings, then sub-levels in the table of contents. HR, when I click on an item in the table of contents created from a bookmark, it appears section open. But when generating a CHM, clicking on anything underneath the heading level 1 only open the title of level 1 - it does not jump to the desired under level 1 area.  This TOC works in HR 7.

  These bookmarks have spaces? If so, change a couple to remove the spaces and try again.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• InDesign CS5 - customizing the table of contents

  Hello

  I have a book of 200 pages that uses x 3 table of contents for different purposes. All the works that I expect.

  However, one of my OCD contains a list of advertisers that lists the name of the advertiser and is the relative page number.

  Apart from the text main pages are ads that appear on the IFC, the IBC and the OBC in the book.

  I have the cover pages set up as OBC/column spinal/OFC and IFC/column spinal/IBC with personalized and prefixes section page sizes.

  Is there any way to prevent the table of contents to generate number page after prefix in these cases, I guess that the pages are auto numbered to the table of contents feature?

  Announcer 1... IBC6

  Advertiser 2... .. OBC1

  Advertiser 3... IFC4

  Steve

  I'm not sure I understand what you're asking, but I think you are saying that you want the section prefix, but not page numbers, for ads. As far as I know, you cannot automate the removal of the numbers, but there is nothing prevents you to change the table of contents to remove them manually (or with find/replace using GREP) after the table of contents was generated.

• FM10 cannot generate the table of contents with main points

  Hello world

  I've read some useful discussions here on this issue but I still can not to be able to solve this problem of main points for my OCD.

  I already assured that the reference for all my image in my book files have the same reference table of contents of the page entry page. When I generate my OCD the main points are missing!

  I then, open the reference page for the TOC file and paste in the same entries of table of contents of my other image files and then update the book to regenerate the table of contents.

  Also, this does not solve the problem.

  Any help to fix this would be really appreciated!

  Here are some screenshots of my reference page for my OCD (below). I have ensured that this section is present for all of the image files from my book too (in their sections of the reference page for the table of contents).

  ChapterTitleTOC

  

  Heading1TOC

  

  Heading2TOC:

  

  And my OCD generated

  

  Open view - reference pages and search for all occurrences of

  <$paratext><$pagenum>

  remove the space between the tags, then press tab once, then make sure you that you have selected to view - toolbars - formatting to display the paragraph on the right-hand panel, then switch to design a so I don't see there you already have 5.76 tab stops then click it and make sure before that the vertical slider of creation is <$paratext>(it should be a sign of angular once you press tab) |<$pagenum> then Now click on your 5.76 and change of play left to right or CHANGE WIDTH see screenshot AFTER YOU press CONTINUE you need to update while paragraph sign for reference pages

  

• Blades appears in the table of contents

  Hello

  I'm trying to set up my OCD for a project, but for some reason, the slides I need to include appear not in the table of contents, so I can't select them. You can see from the image below that OCD jump slide 79 zip 83.  The slide, I need to include (an intro to the review section) is slide 81. The slides are not hidden and are not consolidated. I don't know why they may not appear in the table of contents. I tried to work around it by adding a new slide with a very short playing time, but he did not show either. The first slide that lack is a Quiz slide. Who would have something to do with it?

  Thank you!

  

  Hello

  Do you have update you the table of contents: in your screenshot using the small button on the top of the settings button, I see that it is active, not greyed out.

  Lilybiri

• Find/change the question numbers and create the Table of contents

  Hello! I need help to find all my item numbers and apply a paragraph style so I can use them to create a Table of contents page.

  The sample numbers

  #12345

  #12345-5

  #12345-20

  #12345-ABC

  #12345/N

  I tried to enter #^? ^ ? ^ ? ^ ? ^ ? in the search/replace and but it is exactly 5 characters after the sign #. I wonder if you can find all characters starting by # and up until the last characters.

  Once I found all item numbers, how can I apply the paragraph style to have these characters after the sign #? Because I only want to show item numbers without the # sign on the Table of contents/Index page.

  In addition, I have InDesign CS2, which have no function GREP maybe I can do this without the GREP?

  I really appreciate any help. Thank you very much.

  Are your numbers by themselves in a separate paragraph? OTHERWISE you can not USE the table of contents feature to list all the numbers.

  If are, then just look at # in find/replace, then set it to change formatting a new paragraph style (you must create this style in CS2) that you want to include in the table of contents, then as you say, you can use find/replace once more on the history of the TOC to remove the # of all numbers.

• Customize the table of contents

  Hello guys,.

  I ve had a little problem with the table of contents in Captivate.

  I would remove the time in the table of contents. (see photo)

  But I Don t know where to find the function to turn it off.

  

  was soon Smoky

  Hello

  This tutorial is perhaps what you are looking for?

  http://www.cpguru.com/2010/01/29/tutorial-hide-the-total-duration-in-the-TOC/

  Lilybiri