remove the pass

Similar Questions

• Pass simple - how to remove the conservation task bar it turned on?

  Hello

  I own a HP Pavilion DV6 6053ea and I had a few problems with simple pass.  Before I installed it and it stuck on the taskbar in Windows 8.  Someone gave me a new update of the driver that has removed from the bar spots.

  For some time he acted a little (my fingerprint reader would take several swipes before he woke up) and I have installed the latest version of the driver HPLite32_build_6.0.100.252.  It is not like I plan to work.

  Anyway, he's back in the task bar and I would like to remove it.  Also the fingerprint reader is off most of the time and allows quick access very slow.  How can I solve these two problems?

  The question might be one driver / software incompatibility.  In the past, when this happened, the software would simply "does not work".   I don't know where you came, that is the value which SimplePass version you were before and what validity driver version you have - the fact is that in this most recent version, there may be an error of "lesser" tangle, but not to destroy the facility.  ???

  For Windows 8

  sp58900 validity sensor V4.4.234.0 Win8

  sp58540 HP SimplePass V6.0.100.244 Win7-8

  The above is an example of the 'Windows 8' and configured software SimplePass pilot that is currently in use on a large number of mobile phones.  Note the version number similar to the SimplePass to your own version.

  If your driver version of validity is late, in other words, if the driver that you have on your computer is OLDER one pictured here, then I suggest you download and update this driver (as shown).  You are likely to have a better "match".

  Next: It is highly unlikely, but you can also check to make sure that you have not inadvertently your driver to "allow the computer to turn off this device to save power".

  Of your Deskop:

  Control Panel > display icon > device management > biometric devices >

  Validity Sensor right click > Properties >

  Power management > make sure the box "allow the computer to turn off device" is DISABLED

   

  
  When you make changes to SimplePass, expect not to complain (work stoppage).  When you look at it, not expect to stop working...

  General rules for success:

  • Installing the driver FIRST, RESTART
  • Install / repair software second, setting up the bases... Reset.

  ======================================================================================

  First of all, before EVERYTHING CHANGES, make a copy of your Webcards.  The Webcards are similar to your 'Favorites' for your websites with passwords SimplePass attached.  You should make periodic backups and always before making changes or try to repair the SimplePass software.

  Export the Webcard database:

  If you have working software SimplePass, export your Webcards before proceeding.  In the case where you must remove the SimplePass software, your webcard backup can be used (imported) to restore your Web site login information.

  Start SimplePass > settings > Export

   

  NOTE: File will be called *.tsd

   

  Don't forget to perform backups periodicals webcard when you change passwords and / or add Web sites!

  =======================================================================================

  To reset / repair software without deleting:

  Fix SImplePass software:

  Control Panel > programs and features >

  Looking for this program:

  Click on HP SimplePass
  Select "repair".

  • After "fix it", RESTART / REBOOT your computer

  ===================================================================================

  Remove it from the taskbar in Windows 8:

  • You should be able to go to the new startup window,
  • find the tile for SimplePass, right click on it,
  • and then pull it out of the new taskbar.

  If it is stuck, it can take a bit more work... the 'repair' above for the progam can help - try it if the simple "right click and delete" does not get this out of the way.

  I hope this helps!

• The University has passed to gmail so I have now two accounts of thunderbird. How can I safely remove the unused?

  The school where I teach is recently spent all gmail accounts. To use Thunderbird, I had to register again, which gives me two accounts Thunderbird on the same column on the left. As far I can tell, everything has migrated to the new account. Can I remove the old one - or hide in some way? Is it safe to delete? And how do I do it.

  If you are sure that there are no mail to be kept in the old account, it can be deleted.

  Press Alt or F10, where the menu bar is hidden.
  In the main menu bar:
  Tools - account settings
  Select the account to be deleted in the left pane.
  Select 'Delete account' in the drop down menu "Action counts" at the bottom.

• How to remove the synchronization data?

  FF 29
  The answer in my opinion is to go to 'manage '.

  I sign in with my sync email and password.
  

  The choices are:

     Sign out
     Change password
     Delete account
  

  I don't want to delete the account. I just want to remove the synchronization data, so I can start over?
  How do I do that?

  Hi silat.

  Mind if I answer? For most everyone here answering the questions is a volunteer support and we do not work for Mozilla. We are just regular Firefox users like you who contribute to our time to help the Firefox community.

  As for your sync account, the only way I know how is to remove your sync data completely is to delete your account then sign in using the same e-mail address. I tried it on a new profile of every night and it passes through very well.
  Simply go to https://accounts.firefox.com/settings and select 'delete account '. Then just sign up again.
  A few other contributors may have another way to achieve (they could respond if they do), but that's the way I know how.

• remove the formatting of a document pages

  I'm importing text (copy / paste) into a new document in Pages. There are commands of paragraph at the end of each line, visible by clicking Show invisible characters on the view tab. When I try to format the text, I get weird results as simple words on a line. If I remove the descendant 'P' at the end of each line manually, which solves the problem; everything is as it should be. I tried to use 'Find and replace' but it doesn't work because it removes all invisible characters so that you get a long sentence without a space between the words. I tried to use TextEdit to remove formatting controls unwanted, as found in another link, but that doesn't work anymore. Any suggestions on how to do to remove all "P"? I have a document of 50 pages to reformat, so doing this manually is nuts.

  HI Dwight,.

  When you copy text from? I guess that returns were inserted by an application of text at some point editor in the process. If you copy a text editor, you can find an arrangement that will toggle between having and not having returns at the end of each line. If so, set it to "off" before the selection and copy.

  Is it possible to distinguish these additional returns of those legitimate by looking at the characters that immediately precede and follow?

  Back at the end of a paragraph should immediately follow a sign of punctuation; period, question mark, or exclamation point and should be immediately followed by the first character of the next paragraph.

  End of line returns should not follow one of these brands, except when this brand (and the space after it) come too close to the maximum line length to fit the word following on the same line.

  If you're lucky, and the record was produced by someone not wise to (or not to trust of) the ability of the software to add a space after a point, you can see that two consecutive returns have been used (as I have in this post) to create this space.

  End of line returns should not follow one of these brands, except when this brand (and the space after it) come too close to the maximum line length to fit the word following on the same line.

  Knowledge of these patterns can give you a method three passes for the removal of these statements of additional income by using find/replace.

  On the first pass, MARK returns you want to keep.

  -If double returns have been used, use two returns as your search string and two markers as the same string replacement. The markers must be a pair of characters that do not appear or do not appear in pairs, in the document. ' # ' comes to mind.

  -If you need to rely on punctuation, you will need to make a separate pass mark for each sign of punctuation that was used at the end of a paragraph. For each, the Find string will be markreturn and the brand of string replace. #

  This first pass will replace all the feedback that you want to keep with "#" (preceded in the second method of punctuation that should also be kept).

  On the second pass, remove all the statements that have been left in the document. Find the string: return the replacement string: a single space.

  NOTE: This assumes that the end of the return line has replaced the space that normally elapses between the words, at this stage. If you have determined that there is a return of end of line AND a space between the word at the end of a line and beginning of the next line, leave the box replace empty.

  CAREFUL directions: understand the space, then see the fourth passage below.

  On the third pass, reinsert the required return. Search: # replace: return

  Note that if your first pass sought and kept a sign of punctuation, you do NOT want to restore it - there was kept in the first pass.

  Fourth optional phase: one of the things I've taught students when we started using processing in elementary school was never press the space bar twice in a row. You need a space between the words, no space between a Word and punctuation after the word and a space between the mark end of a sentence and the first word of the following sentence in the same paragraph. This pass of find/replace removes extra spaces using find: replace two spaces: a space.

  Repeat this step as many times as necessary (until find/replace reports "none found" or a similar message).

  Kind regards

  Barry

  PS: This method can probably also be written in an AppleScript, who would have shot on the necessary measures and simplify everything.

  B

• Satellite A350 - how to remove the password?

  Hello world
  I am neck and I joined just the website
  I have a problem with my Satellite A350

  I bought this laptop from an auction of trust, not on the net, with the attached unfortunately password that don t work of password, but clams House auction that he does,
  What happens is when I turn on the first screen you see is looking for a password, I put in the so-called password that was given to me, but it won't work. When I try to enter the BIOS setup, he still wants the password to continue.

  This computer using Vista and I can't even replace the Vista disc in the DVD player because will not work because the op system is not started
  I hope someone knows how to pass the password or can help me. I tried to remove the internal battery but no go, my email is [email protected] if you want to explain myself better things

  Thank you to everyone
  Col

  Hi neck!

  It's not so good news

  I m not a Satellite A350 owner but if you want to remove the password you must contact an ASP and ask for help. Laptop technicians are know how to remove the password and so I think they can help you best.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite C850-B79 - how to remove the BIOS password?

  How can I locate, reset or remove the bios password of Toshiba Satellite C850-B79?

  Hi jai0830

  Unfortunately, the unknown BIOS password cannot be removed or deleted without additional assistance from authorized maker Toshiba.
  The BIOS password is somehow the level of security that must be passed by an authorized person.
  If you n t know this password, you will need to contact the service guy in your country to get removed.

• How to remove the advertising popping up

  I keep getting some advertising popping up when you use Safari, I tried to remove it manually by using the option to go on the record, passing through all the article, also tried OS upgraded to Captian with security was last updated, but it's always come back. What can I do else?

  Remove the browser pop up problems

  Malwarebytes | Free Anti-Malware Detection & removal software for

  Apple Macintosh computers

  Adblock more 1.8.9, GlimmerBlocker, or AdBloc k

  Remove the adware that displays pop-up ads and graphics on your Mac

  How to remove adware FlashMall of OS X

  Stop advertising and pop-up advertising windows in Safari - Apple Support

  2.11 DetectX

  Useful links about Malware problems

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty of pop-ups in browser that support Safari.

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

• Satellite Pro 4600: How to reset or remove the BIOS password

  Hello

  I forgot the password to my Satellite Pro 4600 BIOS.

  How can [1] I reset the password?

  [2] can update BIOS floppy be helpful for bios reset?

  [3] otherwise, you know another method?

  Kind regards
  Aloni.

  Hello

  1.) it of not possible to remove the BIOS password yourself.
  If you forgot the password of the BIOS, then contact Toshiba service partner in your country to remove the password.

  2.) each laptop has a BIOS procedure. You should check the Toshiba FAQ - How can I update the BIOS-
  Please check this Toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=Direct_Support_e u

  But if the BIOS password you can not pass the BIOS. The password of the BIOS must be removed for updating the BIOS.

  3.) see FAQ

• How to completely remove the Messenger app?

  Hello.

  Anyone know how I can remove the Facebook Messenger of the Cloud application? I want to remove it completely from all my devices and then reinstall it from scratch, but it still shows as yet on the cloud.

  I'm not sure it relevant to this question, but I'm running a Mac OS X El Capitan 2009 and a 6 iPhone on iOS 9.2.1

  Any help much appreciated.

  Thank you

  The app is not physically on the cloud, it's just to show that you have downloaded before and you can download it again.

  If you remove the application of the iPad, it deletes everything associated with the application. If redownload you the app, it will always install a new copy and cool app iCloud does not store the app, so you pass never twice the same exact copy. It will be a new copy of the application each time you remove and then reinstall the application.

  In addition, you will need to remove the application from each device, and then start a new download on each device. You can remove an application by pressing your finger on the icon for a few seconds until what apps shake. Press the 'x' to delete. You can also view the sizes and remove apps from settings > General > storage and use iCloud > manage storage (under the storage section) > Messenger > remove app Note If you select storage manage under the section iCould Messenger does not appear.

• Remove the child window Parent using WIN API

  Hi all

  For a parent-child relationship between two screws using the User32.dll I use the SetParent function and pass the handle of the parent VI and VI child to this function. Now, after this relationship has been established, I want to remove the child from the parent window and use it as an independent VI using WIN API. Can someone help me on this?

  Thanks in advance!

  Fragger Fox!

  Hi Fragger Fox,

  I think that it should be possible, if you assign a new parent to the child. Maybe this works if you assign the desktop as a new parent.

  It will be useful.

  Mike

• remove the two zeros of hexadecimal string

  I'm passing an ASCII string of bench to a VI I wrote and I start with "04" and my VI the ASCII get normal "04".  I then have to convert an ASCII string to a Hex string (using a solution of VI, which I found on the web) and instead, having it display Hex '04', it adds two zeros in the Hex display "0004".  I need to remove the two zeroes don't is just "04".  I don't know there is probably an obvious solution (I'm fairly new to LabVIEW). Thank you

  A statement of format for a cast of just wiring operation confuses the programmer. Don't, don't. The value is not important as the type. (.. .and if you want a string, you can't even wire type.) String is the default!)

  What is the representation of the blue zero constant wired scheme down to the left of "hexadecimal string to munber '? Make sure it's U8.

  Please join the real VI, many things cannot determine in a single image. Thank you!

• an Apple iPod cannot be correctly removed by using the feature remove the device safely

  after syncing my ipod, I can remove my ipod from itunes.  However, I can't remove ipod from windows xp by using the feature remove the device safely to the toolbar.    I click on the safely remove, the process can not pass with only sand standing clock sign.

  When I ignore it and remove the ipod to the usb port.  a yellow exclamation point is next to the apple ipod usb device in device management.  Later, when I close the pc,

  He cannot close normally, I shoud reset cp and restart and then shut up.

  What can I do? is this problem related to my windows system or linked to my ipod.  I have try this ipod with some computers, problem solved, then with some computers not.

  Moreover, another usb device is ok, these problems will not occur.

  Support for products Apple is located in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Windows XP does not start. Message says to remove the antivirus

  Original title: could not start Windows XP with tips screen error to remove the anti-virus, Defragmenter and support utilities.  equipment checked 'pass '.  is not disk to start and save data files.

  Cannot start Windows XP with tips screen error to remove the anti-virus, Defragmenter and support utilities.  equipment checked 'pass '.  is not disk to start and save data files.

  my laptop is a COMPAQ Presario V2000 (p/n PV898AV) with the WINDOWS XP PROFESSIONAL product key:

  Recently, I used a lot of Yahoo E-mail and made an email with an attachment that carries a local .org Logo and my personal autobiography for an education program.  WORD files can contain certain campaigns policy materials and opinions who are information news and views.  20.11.2011 when I turned on the computer, he had immediate control by NT. F flow and State on 'a problem' with files and folders, and there wasn't enough 'space' to correct the error.  Subsequently, an error screen appears alternating with the DISPLAY of COMMAND CHECK OS.  I tried F8, F10, F12 keys to do all that necessary. He kept going back to the SCREEN of COMMAND VERIFIER 0s.  Tried safe mode... and all the list.

  The error on the technical information screen * arrested... some our I has not registered (help if I declare these figures?)

  He said if power failure, restart your computer.  If the screen kept appearing, he said: Use CHKDSK /F to remove the antivirus... support... and defrag utilities.  check the configuration of the hard drive etc.   I have used Tools Setup F12 for self-test on hard, he said 'PASS '.

  I don't have the Setup disk or checkdisk with me on this trip trip, it will be 5 months later to get there.   However, I just buy this mini laptop HP and take advantage of this great PC.  However, I miss the old one and want to save this data.

  can I change the values of the ease of CONFIGURATION to start the Windows?   or, when I used the F10.., it runs the n... Open timeout (how to use it to help me remove the files/programs); safe mode with command prompt also failed.   What command line?

  Please inform how to start the new WINDOWS XP that says to protect my files (I hate the overprotection in this area of the Hong KONG SAR but too pirates too, people are confused as ' ell) Thank YOU.

  Hi Cann2011,

  You must have an installation disc. Until and unless that disk is not available, we cannot go further to fix the problem.

  Once you organize for the disk, then you can see the article in the Microsoft Knowledge Base and check.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

• remove the error of write protect, transfer music files to the micro sd card

  remove the error of write protect, transfer music files to the micro sd card

  on micro SD card it self you have a little pass that you can move