Remove the read-only constraint of the table?

Similar Questions

• Remove the Table created in the forms - IOM Designer

  Dear all,
  Is it possible to remove the Table created in the form designer?
  
  The Recycle Bin icon is disabled in the console of the design.
  
  Thank you for your help

  Restore the database.

  This is an instance of dev is for. :)

  Best regards
  / Martin

• Removes the table causing a lot of disk reads

  Until recently that we hadn't made many deletions on one of our large tables in the comic book. After a recent project has been implemented, system performance has gone downhill a bit. Research in one of the top offenders through v$ sql, we find this:
  
  REMOVE IRQ INSPECTION_REQUEST WHERE WORK_ORDER_SEQ =: B1 AND SEQUENCE_ID IN (SELECT SEQUENCE_ID FROM (SELECT SEQUENCE_ID, CHAR_VALUE FROM INSPECTION_REQUEST_CHAR WHERE WORK_ORDER_SEQ =: B1) X WHERE THE CHAR_VALUE IS NULL).
  
  Here are some stats I see in table v$ sql:
  
  Performances: 4
  Analyze the calls: 4
  Disk reads: 565457
  Gets the buffer: 634626
  Time CPU: 69280000
  Elapsed time: 290015297
  
  If I read this correctly 100 000 disk reads are performed on average whenever this statement is executed. The situation that I am is that the table we are trying to remove from has not been analyzed in almost 2 years and many of the indexes on the table have not been analysed in more than a year. Is my problem here something to do with the fact that this analysis has not been done or is there something else, I'm missing?
  
  We checked the SQL to use the correct index and it is set to perform at its best. We have also tried to run this in our dev environment, and we have the same problem with the slow delete. We even watched the rowid for a row we try to delete and tried to delete by the rowid and the DB is still thousands of readings of the disk to perform this deletion. Our dev table and all the clues have been analyzed recently (last month or almost).
  
  So maybe it takes away the possibility that the absence of analysis of the tables and indices of production contributing to the issue. At this point, I am at a loss. Here is the statistical information for this table in the production.
  
  Parameter, value
  Size in MB, 20464.00
  Numbers Extents, 1279
  Size in bytes, 21458059264
  
  TABLE_NAME, INSPECTION_REQUEST
  NOM_TABLESPACE, DATA_LARGE_2
  CLUSTER_NAME,
  IOT_NAME,
  PCT_FREE, 10
  PCT_USED,
  INI_TRANS, 1
  MAX_TRANS, 255
  INITIAL_EXTENT, 1048576000
  NEXT_EXTENT, 16777216
  MIN_EXTENTS, 1
  MAX_EXTENTS, 2147483645
  PCT_INCREASE, 0
  FREELISTS,
  FREELIST_GROUPS,
  LOGGING, YES
  BACKED_UP, N
  NUM_ROWS, 18095357
  BLOCKS, 1196456
  EMPTY_BLOCKS, 0
  AVG_SPACE, 0
  CHAIN_CNT, 0
  AVG_ROW_LEN, 485
  AVG_SPACE_FREELIST_BLOCKS, 0
  NUM_FREELIST_BLOCKS, 0
  DEGREE, 1
  CASE 1
  MEMORY CACHE, N
  TABLE_LOCK, ENABLED
  SAMPLE_SIZE, 18095357
  LAST_ANALYZED, 2007-04-01 06:41:24
  PARTITIONED, NO.
  IOT_TYPE,
  TEMPORARY, N
  SECONDARY, N
  NESTED, DON'T
  USER_TABLES, DEFAULT
  ROW_MOVEMENT, DISABLED
  GLOBAL_STATS, YES
  USER_STATS, NO.
  DURATION,
  SKIP_CORRUPT, DISABLED
  SURVEILLANCE, NO.
  CLUSTER_OWNER,
  ADDICTIONS, DISABILITIES
  COMPRESSION DISABLED

  user9539428 wrote:

  delete from inspection_request where sequence_id = 9911147198;

  SEQUENCE_ID is the primary key on the table INSPECTION_REQUEST. This only delete statement performs 7 000 disk reads. Is this normal? We have this problem even if it is disable triggers that would fire following this statement.

  To everyone who looks at the thread, the version of db, on that we are is 9.2.0.8.

  If you have verified that all triggers are actually disabled on the table, there are a few potential candidates that could cause this large amount of activity during the removal of a single line:

  * Enabled foreign keys referencing this table
  * Maintenance of Index, your index finger on the table could be degenerate and could benefit from an operation of "merge".
  * Bugs in SAMS if you use a tablespace locally managed with automatic management of the space for indexes

  You can follow this thread that might have similar problems:

  Ellapsed time too tkprof output

  Try to run the simple removal using SQL trace enabled (Event 10046) scopes as described in the above thread. After the release of "tkprof" of the trace file generated here, as described in the following thread: [when your query takes too long | http://forums.oracle.com/forums/thread.jspa?threadID=501834]

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Remove the Table of contents of a Quiz

  Hello

  Is it possible to remove access to the training when the user passes a test? Looks like there must be a way...

  Dan

  Action Rod pointing to that is to assign the value 1 to the system variables cpLockTOC. Its default value is 0. It is not even necessary to have a tip action, at least if you're on a later version of Captivate because the system variable is not in the drop-down list of the accordion to Actions in the slide properties. A simple action on enter to the first question slide will do. Don't forget to switch it to 0 when you enter backstage after the quiz to allow access again. And the linear?

  It is also possible to hide the table of contents with another variable of system but only if you use the table of contents in overlay mode.

  http://blog.lilybiri.com/system-variables-in-Captivate-6

  Lilybiri

• Why can't remove the table?

  I find a table under soctt Solaris 11g, named BIN$ dnz9wkbnQZaxdctGcob3RA == $ 0, as follows:
  SQL > select * from tab;
  
  TNOM TABTYPE CLUSTERID
  
  BIN$ dnz9wkbnQZaxdctGcob3RA == $0 TABLE
  BONUS BOARD
  DEPT TABLE
  EMP TABLE
  SALGRADE TABLE
  
  I do not know when the table created, if I want to delete the table, can I use following command:
  SQL > drop table BIN$ dnz9wkbnQZaxdctGcob3RA == $0;
  drop table BIN$ dnz9wkbnQZaxdctGcob3RA == $0
  *
  Line 1 error:
  ORA-00933: SQL not correctly completed command.
  
  Why I can't remove this table? How to do?
  Thank you

  Handle: EdwardKing
  Status level: Beginner
  Join date: 27 May 2002
  Messages total: 61
  Total Questions: 24 (24 remaining)
  so many questions without answers ANY .
  :-(

  http://forums.Oracle.com/forums/Ann.jspa?annID=718

  Why I can't remove this table? How to do?

  When a table is dropped, it goes in the TRASH; It may therefore be FLASHBACK.

  What you're trying to DELETE a table already in the TRASH; is NOT authorized.

  When all else fails, read the Fine

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28310/tables011.htm#ADMIN11682

  Published by: sb92075 on February 11, 2011 17:47

• Remove the table for a photo table control framework

  Hello

  I need to create an array of 2D images. Due to the large amount of elements in the array, the width of the image is reduced to a minimum. However there are still a considerable gap between the 2 adjacent elements in the table (see the attached example), which is caused by the picture in the image control.

  I tried to affect the color of transparent photo frame, but even if it is invisible, it is still there. I tried to customize the control too, but I couldn't find a way to remove the framework (for classic and modern styles).

  (BTW, for the control of classical style, there is an option without color box control framework, but no option for 2D image control.) I need model/photos inside the element of control 2D image, so simple color 1 color box is not enough)

  Could someone help to suggest a way to remove the frame and optimize the density of space in the table? Thank you much in advance.

  PJI

  Hello, PJI,.

  You should be able to define the lower field in the area of the image of the control.

  -Right click Control and choose "Advanced Properties"-> "Customize.."

  -To the editor change order to 'Edit Mode'

  -from the menu, click on 'Window'-> 'display the parts.

  -In the part window, select the frame

  -set new values for top, left, height, and width, so that the image is behind the area of the photo

  I hope this helps.

  UliB

• Remove the table if the value not in APEX_APPLICATION. G_f01?

  Hello again!

  I have an apex_application.g_f01 that contains the values in the boxes, now I want apex to remove rows from the table that contains values that are not present in the G_f01 (what are disabled) on submit.

  I can't understand the sql code to do this, could someone give an example?

  This can be a simple thing, but I'm getting confused a lot with sql, maybe because I just php and java.

  EgaSega wrote:

  I have an apex_application.g_f01 that contains the values in the boxes, now I want apex to remove rows from the table that contains values that are not present in the G_f01 (what are disabled) on submit.

  I can't understand the sql code to do this, could someone give an example?

  This can be a simple thing, but I'm getting confused a lot with sql, maybe because I just php and java.

  One possibility would be to create a collection of APEX containing key checked values and use that as the source of the lines to be kept in the SQL delete. Something like:

  begin
  
    apex_collection.create_or_truncate_collection('CHECKED_VALUES');
  
    for i in 1..apex_application.g_f01.count
    loop
      apex_collection.add_member(
          p_collection_name => 'CHECKED_VALUES'
        , p_c001 => apex_application.g_f01(i));
    end loop;
  
    delete from t
    where not exists (select
                         null
                     from
                          apex_collections c
                     where
                         collection_name = 'CHECKED_VALUES'
                     and c.c001 = t.id);
  
  end;
  

• How to remove the table border

  Dear Kings.

  I was trying to remove the borders of tables (my coding below).

  This encoding does not "result: undefined"? How to remove all borders from the table. Please suggest friends.

  var mTables = app.activeDocument.stories.everyItem().tables.everyItem();  
  with (mTables) {  
    topBorderStrokeWeight = 0;
    bottomBorderStrokeWeight = 0;
    leftBorderStrokeWeight = 0;
    rightBorderStrokeWeight = 0;
    }
  alert("Done")
  

  Thank you in advance to all

  Try this,

  if(app.activeDocument.stories.everyItem().tables.length>0)
  {
  app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().bottomEdgeStrokeWeight = 0;
  app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().topEdgeStrokeWeight = 0;
  app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().leftEdgeStrokeWeight = 0;
  app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().rightEdgeStrokeWeight = 0;
  }
  

• How to remove the Tables of HFM Application in SQL

  Hi gurus
  
  1. how to remove the HFM Application Tables in SQL?
  Its manual removal but each application having 120-150 tables? How to do this in one fell swoop?
  
  I deleted some applications using the workspace / shared services, but still its display under HFM under the Tables of SQL Server.
  
  Please help me
  
  concerning
  Smilee

  Hi Smilee,

  1. If the application opens in the web management interface, go to Taskflows management module and make sure that no taskflows exist yet for this application. Remove any existing taskflows.

  2. If demand exists in Shared Services, right-click on the demand for Shared Services and try to remove the application from here

  3. stop Hyperion Shared Services and all the Windows of financial management processes and backups of the relational database of the two patterns.

  4. check the relational database of Hyperion Shared Services repository, in the "ces_apps" table and make sure that there are no lines containing the appname "EXAMPLE." If the line still exists you should enlist the help of Oracle Global Support software to clean Hyperion Shared Services before proceeding.

  5. it is possible to remove all content removed from the relational database of financial management application. Must be very careful when handling manually tables database that permanent damage can be done at the application and other applications if the wrong content is removed.

  (a) first remove all tables, indexes, sequences, and the package objects that begin with the name of the application
  (b) remove all tables starting HSV_appname_xxxxxx
  (c) remove all rows in tables referring to demand HSX_CLUSTER_xxxxx.
  (d) delete all the HSV_ACTIVITY_KILL_USERS, HSV_ACTIVITY_NO_ACCESS, HSV_ACTIVITY_SESSIONS and HSV_ACTIVITY_USERS and HSV_USERS_ON_SYSTEM lines that refer to the name of the application.
  (d) remove the line containing the name of the application from the HSX_DATASOURCES table.

  6. the next time that all Hyperion services are restarted, the application must be removed safely from Windows client.

  You can contact your DBA to write a query on how to remove it.

  Hope this helps,

  Thank you
  Charles Babu J

• remove the table filter criteria

  I used af:table to display data and used the data in the column filter to filter. After you have specified any search criteria, that he must remove it manually, and then press ENTER. I want to remove the search by program criteria and display the data in the table without any search criteria.
  How to remove table filter criteria in backing bean and update the table?
  Thanks in advance.

  Use google and search for "programmatically manipulate filter a table QBE fields" (from steve muench) ;)

• remove the table select row

  Hello

  I'm trying to find a way to delete a selected line in a text file. You can find a classic text file that join this message.

  I first try to insert the text file in the command using node property value drop-down list box, but I see that the first line. I did the same thing with a command table and it works! Now, I need to select a row and delete it. I try to use the node property of the active cell, but I always get (0,0). Why? Someone knows how to do?

  Better idea to do the same task is also welcome.

  LabVIEW 8.5 windows XP

  Thank you

  Francis

  Hi Francis,.

  You should try using the attribute SelStart to the table rather than the property of the Active cell.  Active cell is just used to set the active cell.  Here is a quick change that I made to your code that deletes the selected table row when you press the button Delete and resulting out of the table.  I hope that you should get pointed in the right direction.

• want to remove the table in 10g

  Hi all;

  I was 1 million inserting dummy records in the table.

  Unfortunately, closed session without commit or rollback.

  > > now, I want to delete the table

  SQL > drop table petra.ycx;

  drop table petra.ycx

  *

  ERROR on line 1:

  ORA-00054: resource busy and acquire with NOWAIT specified

  SQL > select count (*) in the petra.ycx;

  COUNT (*)

  ----------

  2

  SQL > select a.sid, a.serial # session $ v a, v$ locked_object b, c dba_objects

  2 where b.object_id = c.object_id

  3 and a.sid = b.session_id and OBJECT_NAME = 'YCX. "

  SID, SERIAL #.

  ---------- ----------

  11 159

  SQL > alter system kill session 11 159;

  alter system kill session 11 159

  *

  ERROR on line 1:

  ORA-00026: missing or not valid session ID

  The command is

  alter system kill session '159,11';
  

  Justin

• Removal of 'Read only' problem Windows 7.

  I want to remove the read-only form a game folder - void / files etc, I do via folder properties menu and it indicates that changes have been made (window comes up with bar grey fillings up to green) and yet I come back and it's like I have nothing. I want to just delete a few old stops and changes to some of the maps (there are a map editor). The game is Civilization III complete. I read somewhere on how to solve this problem through the command prompt, but it did not work... any help? I can't find the 'Saves' folder in the folder of the game. It seems ingame, but outside of the game, I thought that the path is not... This has also to do with the attribute "read only"?

  You can try to run the program as "Administrator" by right-clicking on the icon from the desktop or the .exe file of the game in the game folder, select "Properties" then the "Compatibility" tab and placing a check mark in the box "Run as Administrator" at the bottom of the Panel. This should, in theory, give the game the ability to write but also to read.

• To make a read only selected in a table

  Hello
  I need to customize a standard page. This page contains a table with a collar that has a grain of choice in it. Based on some validations that I need to do a few lines of beans of choice read-only. For example, the values in my grain of choice are one, two, three, then when there is a value of two displayed it should be read only area.
  To implement that I expanded CO processRequest to get the values of the VO, check values and set the read-only pass. But this defines the whole neck to read-only, not a few lines.
  
  I've extended the VO (xxHzDlCerAssignRsltPVO) to set a temporary variable - XXchoiceReadOnly, then replaces the original Version using the JPXImporter command.
  The controller when I instantiated the new VO - vo object returns a null value. RowImpl with accessor methods is the only class file generated for the VO.
  
  When I try to add this transient variable for a single table as parameter reading bean collar - ${oa.xxHzDlCerAssignRsltPVO.XXchoiceReadOnly} through customization it error saying -.
  «oracle.apps.fnd.framework.OAException: Message not found.» Application: DNF, Message name: FND_VIEWOBJECT_NOT_FOUND. Chips: VONAME is xxHzDlCerAssignRsltPVO;. APPLICATION_MODULE = oracle.apps.ar.hz.datalib.certification.server.HzDlCerAssignAM; »
  
  Please help me debug this.
  
  Thank you
  Prabha.

  First of all, you need to use seeds VO name even after extended VO.

  that is, instead of ${oa.xxHzDlCerAssignRsltPVO.XXchoiceReadOnly}
  Use ${oa. HzDlCerAssignRsltPVO.XXchoiceReadOnly}

  Secondly, this approach is also all of the lines read-only. To change only a specific line property (read-only (or disable etc.), go to switch.

  -Anand

• How to disable the change (the value read-only) on an editable Table cell?

  Hi friends
  How to disable the change on an editable on certain conditions Table cell?
  are there example links?
  concerning
  
  Published by: sak on December 22, 2009 11:28

  No, in the apex_item attributes for example

  select
    APEX_ITEM.CHECKBOX(1,empid,nvl(empid,'readonly')) test
  from emp
  

  Shunt