Removed hardware?

Similar Questions

• Safe to remove hardware ball

  All of a sudden (when I have no idea), the "Safe to Remove Hardware" message is not in sight when I delete a USB of the PC. (Icon at the bottom). I can remove the device when I click the button, but then the icon immediately disappears and the ToolTip with the text "Safe to remove hardware" does not apear.

  This happens in all usb ports.

  Perhaps one of the Toshiba Utilities caused this error. What program can I reinstall to make the ToolTips visible again?

  Hello

  As much as I know Toshiba has nothing to do with the described issue. All preinstalled Toshiba Utilities or tools don t affect any kind of typical negative Microsoft operations, messages or something similar.

  To be honest, your question must be posted on some forum of Microsoft.

  By the way: have you noticed when you use different devices connected to the USB ports?

• Re: Removing optical drive of 'Remove hardware safely' list (F60)

  It's a bit annoying when icon 'Remove hardware safely' is always on, is there a way to remove ODD in his list?

  > It's a bit annoying when icon 'Remove hardware safely' is always on, is there a way to remove ODD in his list?

  Have you tried to hide? I'll be more irritating, so.

• Cannot eject the disc hard ultrabay in ' Safely Remove Hardware and and eject the media.

  Just installed my T430s with Win7 x 64.
  But I have a problem to the ejection of my hard drive in ultrabay using the icon "Safely Remove Hardware and and eject the media.

  I installed the latest Intel Rapid storage driver (RST) worm. 12.8.10.1005 download of Lenovo.
  
  UltraBay drive hard not in the list using the driver Lenovo RST!

  If I use the native Win7 driver (Standard AHCI 1.0 Serial ATA Controller), it works:
  

  Works very well using native driver.

  I guess that the Intel RST pilot could have some improvements to the native driver... so I would frefer using them.

  This is what it looks like in Device Manager:
  Driver Intel RST:
  

  Win7 x 64 native driver:
  

  Suggestions... someone at - it a newer driver of RST?
  Tried to find one at Intel without luck :-(

  I tried today with 4 different drivers and here is the result:
  1: "Lenovo" RST driver version 12.8.10.1005: best performance of all. Does NOT support ultrabay ejct!
  2: Intel RST driver ver. 12.9.0.1001: a little slower than 1. Support ultrabay eject!
  3: Intel RST driver ver. 13.1.0.1058: a little bit faster than 2, but not as fast as 1. Support ultrabay eject!

  4: Win7 x 64 native driver AHCI: a little slower than the others. Support ultrabay eject!

  Test drive: Micron C400 256 GB

  Also tried Intel 320 128 GB and using this disc the native driver was also fast drivers Intel RST (did not try the 'Lenovo' RST).

  How to join Lenovo for the 'Lenovo' fixed driver?

• EliteBook 2540p: do not receive the "Safe to remove hardware" message when I click the icon 'remove hardware safely '.

  After backup hard drive in a 1 to USB. I click the icon 'remove hardware safely '.  Never, I get the message "Safe to remove hardware".  You just end up taking it out, I know that's not good.

  Cyber_Master_G wrote:

  After backup hard drive in a 1 to USB. I click the icon 'remove hardware safely '.  Never, I get the message "Safe to remove hardware".  You just end up taking it out, I know that's not good.

  Hello

  You also click "eject...". » ? In this case, my SD card:

  

  Kind regards.

• its deleted by error in Add Remove hardware. / How can I fix my sound?

  How do to restore sound to my computer somehow deleted sond in Add Remove hardware in Control Panel. any suggestions?

  Hello

  Do you see an 'x' mark on the sound icon in the taskbar?

  
  You can visit this link and use the troubleshooting described in the article steps.
  
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Problem with the icon 'Remove hardware safely' on the bottom of the screen

  How can I get the icon 'Remove hardware safely' to stop making its sound? It makes the bonk sound which indicates that you can remove your device. It slows down the PC games and is just annoying. I used the troubleshooter and checked all USB options that have been listed under my 'pilot' and the message I get says that they are enabled and work correctly. When he makes his tone, the icon in the taskbar disappears and reappears then. It does not seem to be no harm in or affecting any other thing except the PC games we play on our computer. Any help is greatly appreciated.

  Hi Chrisjurrians,

  To turn off the sound for the connection / disconnection of devices, follow these steps:

  a. click Start and select Control Panel

  b. click on device sound and Audio

  c. under device sound and Audio, click its tab

  d. under program events, select the device connection and in the Strait, make scrolling the drop down for None.

  e. also repeat the same for disconnection device

  This should do the trick.

  Let us know if that helps.

• I have an external hard drive and the althogh sound in 'remove hardware safely', it is not listed in 'my computer '.

  I have a HDD external and well that his "safely remove hardware" that is not listed in 'my computer' the problem is I am backing up Paolo and if I can not find I can't do.

  When I go to the hardware / device mananger it is in "O" but I can not find drive O

  Can someone please help.

  This external hard drive works on other systems?

  The drive will appear in the top of the disk management window?  If so, look at the column layout, Type, file system and status.  The "file system" must be FAT or NTFS.  From your description, it appears that Windows does not recognize the partition as being to the format in a way that he can use.  You may need to delete the existing partition (attention: this will remove all files that may exist on the disk), and then create a new partition in FAT32 or NTFS format.  Advice to do this, right-click the disk, choose 'Help', then go to:
  -> How To disk management...-> manage the volumes of base-> Delete, Create, or Format.

  HTH,
  JW

• I lost the icon 'remove hardware safely '.

  Hi all

  I lost the icon 'Remove hardware safely' in the notification bar, I can see on the left side of sreen in respect of the points made, can someone tell me how to get it back?

  I use os XP with SP 3 with 1.3 proccesser. I think that the problem arose when I plugged the USB 2.0 back., and everything has been cut. Thanks for any help.

  silverlearner

  See if this solution sooner solves your problem:

  "My icon"Remove hardware"disappeared. Where can I get that back? »
    <>http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/my-safely-remove-device-icon-has-disappeared-where/744a8e57-a3e1-4006-a7db-223ebd96b623>

  HTH,
  JW

• I used 'remove hardware safely' and accidentally deleted my D: / drive. Help!

  I used the tray icon to 'remove hardware safely '.  The D: / appeared as the only option to select.  (A disc was inside when I did this).  I chose the D: / option and bingo! the DISC has been removed, not the disc.

  How to restore this car?

  Thank you.

  Hi Louise,.

  I understand that you have an external CD/DVD drive connected to your system... He will return when you restart your system, you can also try to remove and reconnect. If the drive is fits into the system, click on start-> settings-> Control Panel-> system-> hardware-> Device Manager-> to highlight the name of your computer-> Select scan for hardware changes.

  I hope this helps.

• remove hardware icon safely begins in taskbar each time computer is started.

  It is said that the material can be now safely deleted (F drive mass storage device) even if no external device usb is connected

  I hope it's the last word on this...

  I, rather than shut down Unit (as usual to disconect it) tried "turn off the device" on the pop-up window. I just rebooted and the icon 'Remove hardware safely' did not appear this time!

  Can be - cross your fingers - it's settled.

  Thanks for the time and all, it was certainly a few days learning because of your starters... Thank you very much

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• New appearance of the icon 'Remove hardware safely' in my taskbar

  Hello.. I'm using windows vista on a computer acer laptop. Today I have been updated from my iphone and press the eject button as itunes tells us to do. Then I tried to update my inano and he would not recognize it when I plugged into the USB port. When I checked it appeared that my iphone is still connected. I stopped him, left and a few hours after I got home, I got a blue screen on my laptop with orders written about it. So I ctrl-alt-del and started in normal mode and it started. Now I have an icon 'remove hardware safely' in my taskbar and have no idea why its there. Can someone help me? THX

  Hello

  The icon is normally so it was probably worth hide if inactive and because of
  the incident you said he was not idle. It should sooner or later hides.

  To check its setting - right click on taskbar - properties - Notification area - customize.

  I hope this helps.

• Problem with the Flash Player and safely remove Hardware icon

  I'm a casual pc user, so it's not very technical!

  I bought a new computer from Dell Studio One desktop in July.  I use it once or twice a day in general.  When I use it, I usually insert a flash drive so that I can save my documents, etc.  I also use the safely remove hardware option before removing the flash.

  Here's the problem: these days, the little 'remove hardware safely' remained in my taskbar with the green check mark on that.  When I click on it, it shows an option to safely remove drive F.  Until this problem, when I want to insert flash, Windows would label it drive F.  Now, all of a sudden, when I insert the flash, it becomes the G.  And I have this ghost f.

  It's not a huge deal, I don't know, but I do not understand what has happened.  Furthermore, I use Vista, and when finally, I guessed my way, I found the Code 47 as the cause of the problem.  Of course, Code 47 indicates that I left something trendy, but obviously, I have not.

  Any help out there?

  Hello

  I suggest check in disk for the driver letters which are present management and remove no matter what additional driver letter (e.g. f :/) and check if the problem is resolved.) Follow the steps mentioned in the article below.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Vista after disconnecting external USB key without using 'remove hardware safely '.

  A week ago, I unplugged my external Seagate USB drive without using a 'Remove hardware safely' first of my Vista pc.  Since reconnecting the drive, I had a series of problems.  The drive itself seems to be ok.   I am able to read and write to files on the disk.  I'm not able to do is the following:

  (1) open disk management.  It hangs on "Connecting to Virtual Disk Service".

  (2) stopping or starting without windows to snap or take an extra long time to stop or start.

  (3) failed to start Google Picasa3 or Adoble Photoshop Elements 7.  They both hang him.  I am able to use other programs such as Microsoft Office, Outlook, Miro, Norton Antivirus.

  Points 1 and 2 above work fine if the drive is not connected.  I plugged the drive into another computer (Windows 7) and ran Seagate disk checking utility.  He came clean back (no bad sectors) so that the drive is NOT corrupted.  (Check of the Seagate utility disk hung on my pc Vista.)   It seems that something related to the disk under Vista service is corrupted.

  I also see "driver has detected an error in the controller on \Device\Harddisk2\DR2." event message for different devices.  I also tried a restore to a point just before that the problem occurred.

  I don't want to reinstall Vista therefore looking for a solution.  Thank you.

  Janis

  Hello

  You can see the two links below, try the given suggestion and check if this helps you solve the problem.

  http://social.technet.Microsoft.com/forums/en/windowsserver2008r2management/thread/8b5d2c5b-C212-4E3F-96e3-91e668d3b178

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/b2b29ed8-f620-4FE1-93b5-8ced0d472aeb

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Remove HARDWARE TSSTcorp CDDVDW TS - L633L ATA (E :)) error/Virus?)

  I'm the 'Safely Remove Hardware' in the lower right of my toolbar whenever I restart my system.  It shows that it is 'OK' to remove my CDDVD burner that is not a USB device, or is it plugged into my computer external (it is a device internal).  I have uninstalled/reinstalled the drive, I have uninstalled/reinstalled all Bus controllers series and I reinstalled physically the disc so all to nothing does not.  Someone told me it might be a virus but I ran Security Essentials and it did not pick up.  I just update my BIOS, do not know if it has nothing to do with it?  Any ideas?

  Hello

  Have you tried the solution I posted above? He was called to work.

  Low-level chipset drivers are available from the maker system (the card mother and maker if a custom)
  suystem) and the actual machine of the chipset such as Intel, AMD, Nvidia and so on (we are not talking
  on the video here).

  To see which chipset Start - type in the box search--> find information system at the top and double click
  on this subject. This information is also available from the system manufacturer or the motherboard.

  It would be an unusual problem for pilots of the chipset level low cause although anything is possible.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.