Remove HARDWARE TSSTcorp CDDVDW TS - L633L ATA (E :)) error/Virus?)

Similar Questions

• Driver TSST Corp CDDVDW TS - L633L ATA Device will not load. The problem code is 19 / how to fix?

  HP Pavilion dv4
  TSST Corp CDDVDW TS-L633L ATA Device

  Control Panel / problem report and solutions
  Problem: Could not load software driver status: sent report

  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 64
  Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 00000013
  Driver name: cdrom.sys
  Driver version: 6.0.6002.18005
  Driver date: 11/04/2009
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Additional information about the problem
  Bucket ID: 619663520

  Control Panel / Device Manager
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried:
  Update driver software
  Uninstall / find the hardware changes
  Uninstall / reboot / new hardware found
  Properties / verification solutions

  How can I fix it?

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  You have to restart the laptop after that.

  Kind regards

  DP - K

• The fatal limit TSSTcorp CDDVDW TS - H653Z ATA Device

  I just hit the limit of CHANGE of REGION in the TSSTcorp CDDVDW TS-H653Z ATA Device. Impossible to change the limit over 4 times and the DVD DRIVE BECOMES USELESS? Integers HP Slimline is worthless to me. I can save the day somehow? Thank you.

  Try to reload the firmware.

  All PC DVD/CD drives have a max of 5 region code change.  You may be able to find a piece of software that will bypass this restriction.

• TSSTcorp CDDVDW TS - L633M ATA drivers needed

  My dvd drive has stopped working so I uninstalled in Device Manager and then restarted and it can not find drivers to reinstall.

  I also do not find anything on the internet.

  TSST is obscure.

  the samsung live update tool does not work (I read that it was the tool to use)

  Someone help?

  I have presario CQ61 223SA

  See you soon

  All fixed. Had to remove the upper and lower filters in the registry

• Reinstall for TSST corp CDDVDW TS - L633B ATA device

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  Here is the solution to update your device with the latest driver of Toshiba/Samsung.

  Introductory material.

  
  

  1 here is the update for TSSTcorp CDDVDW TS-L633B ATA DEVICE.

  2. There is a update for the Samsung TS-L633B, but there only version SC01, which WILL NOT be updated the version of the TS-L633B HP because HP version is 0301 with an OEM Code of HM.

  3. However, Samsung has renamed TS-L633B with a new device driver ATA which is called SN-S083B and has a pilot SC02 update.

  4. the way that you update TS-L633B Code 0301 Version with HM Code OEM with the new Samsung SN - S083B Version SC02 Code is to patch the file and flash TS-L633B HP with the patched file.

  Instructions.

  
  

  IMPORTANT - THIS ONLY REFERS to those who have the HP TSSTcorp CDDVDW TS - L633B ATA Device - check device manager to make sure that you have this model number device driver before you start - YOU DO THIS at YOUR OWN RISK. Proceed only if your product is not guaranteed and do not wish to pay for another DVD player.

  1. click on the following link and download the firmware SB02. Global Distribution of SN-S083B: http://www.firmwarehq.com/download_1380-file_SN-S083B_SB02.exe.html

  2. If you don't have a utility program unzipped, click on the following link and download and install 7zip that corresponds to your computer from the following link: http://www.7-zip.org/download.html

  The BIN SN-S083B unzip using 7zip by right clicking on it and choosing 7ZIP > extract here.

  3 download the Flash Samsung Standalone utility:

  http://www.samsungodd.com/KorLib/file/tsdnwin.exe

  4. download and unzip http://ala42.cdfreaks.com/MCSE/MediaCodeSpeedEdit.zip to ala42 MCSE

  Download source: http://ala42.cdfreaks.com/MCSE/

  5 create a folder and name it FLASH and place the following 3 items in the folder.

  SN - S083B_SB02.bin that you have checked out

  Flashing Samsung Standalone utility

  MCSE of Ala42 you have downloaded and extracted the zip file

  6. After you have placed all three objects in step 5 in the folder named FLASH, place the FLASH folder and all of its contents in the C drive.

  7. After placing the FLASH folder in C drive, open the folder and CLICK on RUN AS ADMINISTRATOR and ALA42 MediaCodeSpeedEdit.exe RIGHT.

  8. when ALA42 MediaCodeSpeedEdit.exe opens, click the LOAD button and place you in the FLASH folder in C drive and load the file SN - S083B_SB02.bin - when the file it load it will show all of its regions.

  9. once the file SN - S083B_SB02.bin is fully loaded, place a check MARK in the area of CPR1 in the lower right of ALA42 MCSE.

  10. After putting a check in the box by ALA42 MCSE CPR1, click SAVE in the upper right and save the file in the file FLASH as SN - S083B_SB02_speedpatched.bin.

  11. now go to START > all PROGRAMS > ACCESSORIES > COMMAND PROMPT and right click on command prompt and choose RUN AS ADMINISTRATOR to open the command prompt in the Administrator role.

  12. once the command prompt opens, type the following command: CD C:\FLASH and press the ENTER KEY.

  13 after hitting the button enter, the command prompt should read FLASH.

  14. to the FLASH command prompt, type the following: nocheck tsdnwin and press the Enter button to open the flashing Samsung Stand Alone.

  15. when the flashing Samsung Stand Alone opens, click on the on button SEARCH and navigate to the file 'SN - S083B_SB02_speedpatched.bin"to load it into Samsung's Flash utility.

  16. the file "SN - S083B_SB02_speedpatched.bin ' will load and click on DOWNLOAD to start flashing your TS-L633B ATA Device.

  Wait until the flash is finished and when it finishes, it will ask you to restart the computer and you must restart.

  When you rebott and are back at your desk, Windows will recognize the drivers for your TS-L633B ATA Device and install the new drivers SN-S083B_SB02.

  When it finishes installing your drivers, restart the computer once more, and then you're done.

  NOW ENJOY your CD/DVD-RW drive updated.

• Engraver of CD/DVD TSSTcorp CDDVDW TS-L633M 0200 (ATA) fails on all brands of CD

  I had problems with my CD/DVD burner for years.
  
  My laptop is a "Pavilion dv7t-2000", P/N: NB406AV.
  I am running Windows Vista Home Premium 64-bit version.
  
  The CD/DVD writer on my laptop is a
  TSSTcorp CDDVDW TS-L633M 0200 (ATA).
  
  In the past every time I burned a CD, the CD would defects in one or more tracks.
  Sometimes the burning application would indicate that there are errors when writing
  and I would just take this CD and insert a different CD.
  
  Lately, this failure of writing happens much more often, but more often than that.
  the application hangs up during the writing of the directory on the CD.  "Cancel".
  button never works and even an "end task" from the Windows Task Manager.
  results in "the program does not.  On a stack of 50 Memorex CD - R CD,.
  44 failed, and the 6-CD which created a CD audio with success, all had obvious
  defects that jumps then read.  I bought a stack of 30 Sony CD - R
  CD 9 of the top 10 failed with the same problems and the successful single
  Burning audio CD produced audio flaws similar and jumps.  Rather than waste more
  CD, I started to look for other causes.
  
  I searched the CD write failures and found Memorex and other Web pages that lists all of
  compatible with its CD CD burners and my CD/DVD writer is not yet listed-
  This implies that their CD products do not work with my burner that came with my laptop.
  
  http://Support2.Imation.com/downloads/IMN/optical/compatibility/CDRCompatibility.PDF
  http://Support2.Imation.com/downloads/IMN/optical/compatibility/4XCDRWCompatibility.PDF
  http://Support2.Imation.com/downloads/IMN/optical/compatibility/10XCDRWCompatibility.PDF
  
  How can I get a replacement of CD/DVD reader/writer who settled in my HP laptop
  It is also compatible with the discs, CDs and DVDs currently available products today?
  
  -East-HP sells a replacement burner?
  
  -How much does it cost?
  
  -What phone number can I call to order?  (I have installed it locally.)
  
  Thanks in advance.

  Here's a selection of what is available to replace the laptop disks.  Choose a

  Unless the laptop has an unusual provision, most people should work.

• Driver for TSSTcorp CDDVDW TS-L633C has a Code 19 issue.

  I tried the advice from this post, and it didn't fix my problem so I will post the question again.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_cp-hardware/driver-for-TSSTcorp-CDDVDW-TS-l633c-has-a-code-19/b71b2899-4EEB-4C70-94dB-a714eda49cbc

  I tried the DVD online windows 8 works do not fix application - that didn't work.

  I was also on the Microsoft technical support without success. We even tried to install the driver of windows 7.

  Is it possible to use the Windows 7 driver somehow, or I'll have to wait for Toshiba to pull himself together and provide a driver of windows 8?

  Don't know if it's the same problem I had on my Toshiba with a Code 19 error with my Matshita DVD drive but I cured it by removing Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. Might be interesting to try :)

• Cannot eject the disc hard ultrabay in ' Safely Remove Hardware and and eject the media.

  Just installed my T430s with Win7 x 64.
  But I have a problem to the ejection of my hard drive in ultrabay using the icon "Safely Remove Hardware and and eject the media.

  I installed the latest Intel Rapid storage driver (RST) worm. 12.8.10.1005 download of Lenovo.
  
  UltraBay drive hard not in the list using the driver Lenovo RST!

  If I use the native Win7 driver (Standard AHCI 1.0 Serial ATA Controller), it works:
  

  Works very well using native driver.

  I guess that the Intel RST pilot could have some improvements to the native driver... so I would frefer using them.

  This is what it looks like in Device Manager:
  Driver Intel RST:
  

  Win7 x 64 native driver:
  

  Suggestions... someone at - it a newer driver of RST?
  Tried to find one at Intel without luck :-(

  I tried today with 4 different drivers and here is the result:
  1: "Lenovo" RST driver version 12.8.10.1005: best performance of all. Does NOT support ultrabay ejct!
  2: Intel RST driver ver. 12.9.0.1001: a little slower than 1. Support ultrabay eject!
  3: Intel RST driver ver. 13.1.0.1058: a little bit faster than 2, but not as fast as 1. Support ultrabay eject!

  4: Win7 x 64 native driver AHCI: a little slower than the others. Support ultrabay eject!

  Test drive: Micron C400 256 GB

  Also tried Intel 320 128 GB and using this disc the native driver was also fast drivers Intel RST (did not try the 'Lenovo' RST).

  How to join Lenovo for the 'Lenovo' fixed driver?

• Reading CD/DVD and written Publisher details that problems detected by car is not able to burn (TSSTcorp CDDVDW SH-S202J) he can read, but he can't write DVDs/CDs

  ,
  My name is shabani, I have a CD/DVD writer is to say Samsung (TSSTcorp CDDVDW SH - S202J) it can play DVDs/CDs but stops when burned in any burning software. The drivers are 'ok' and is there something that can be done?

  Hello SanjuSS,

  If this still happens after two distinct formats, then you may very well be hardware problems here.

  When burn us a CD/DVD, we use a separate component that reads.

  There are diagnoses of material that accompanies this disc and can we run them.

  It would be wise to contact the manufacturer at this time.

  Best regards

  Matthew_Ha

• TSSTcorp CDDVDW TS-L633A has a Windows 7 pilot program

  It's after the diagnosis of microsoft. Reinstall watch device driver Succeeded on the right side.

  I was last to play around with iTunes downloading a CD later to an iPod. The CD/DVD does not automatically recognized. Even Window Media Player can not see the CD/DVD drive. Even the computer does not display the CD/DVD device.
  The window indicates that I have install the appropriate driver and in another part of the newspaper, he said the driver must be reinstalled
  I tried to run FixIt, but it does not solve the problem.
  How can I reinstall the driver?

  Hello

  Which Microsoft Fixit have you done to solve the problem?

  Run the troubleshooter and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  I suggest you to perform multiple steps in a similar discussion.

  Driver for TSSTcorp CDDVDW TS-L633C has a Code 19 issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/driver-for-TSSTcorp-CDDVDW-TS-l633c-has-a-code-19/38d693cb-83d4-450e-88ca-be0cd9e94b6a

  Hope this information helps.

• Driver for TSSTcorp CDDVDW SN-208AB does not work.

  Hi, I have a problem with the driver for TSSTcorp CDDVDW SN-208AB. My computer is a Toshiba Satellite L850 - 1 L 1 with windows 8. I bought it 3/4 months ago, and I think this is the first time that I had to use the CD input, but the computer does not recognize the CD driver, so I can't access and use. When I go to Device Manager, there is a symbol of error and the specific error is something like (I've translated it in English to Italian): "cannot start this hardware device. The configuration in the registry information is incomplete or damaged. (Code 19) ». I read that other people have had a similar problem, but I really don't understand how this could happen, because it's a new computer.
  How can I solve this problem?

  Thanks to advice

  Thank you
  I had already tried this solution, without success. But this time, I don't know why and how it worked!
  I can finally use the CD driver!

• Safe to remove hardware ball

  All of a sudden (when I have no idea), the "Safe to Remove Hardware" message is not in sight when I delete a USB of the PC. (Icon at the bottom). I can remove the device when I click the button, but then the icon immediately disappears and the ToolTip with the text "Safe to remove hardware" does not apear.

  This happens in all usb ports.

  Perhaps one of the Toshiba Utilities caused this error. What program can I reinstall to make the ToolTips visible again?

  Hello

  As much as I know Toshiba has nothing to do with the described issue. All preinstalled Toshiba Utilities or tools don t affect any kind of typical negative Microsoft operations, messages or something similar.

  To be honest, your question must be posted on some forum of Microsoft.

  By the way: have you noticed when you use different devices connected to the USB ports?

• Re: Removing optical drive of 'Remove hardware safely' list (F60)

  It's a bit annoying when icon 'Remove hardware safely' is always on, is there a way to remove ODD in his list?

  > It's a bit annoying when icon 'Remove hardware safely' is always on, is there a way to remove ODD in his list?

  Have you tried to hide? I'll be more irritating, so.

• EliteBook 2540p: do not receive the "Safe to remove hardware" message when I click the icon 'remove hardware safely '.

  After backup hard drive in a 1 to USB. I click the icon 'remove hardware safely '.  Never, I get the message "Safe to remove hardware".  You just end up taking it out, I know that's not good.

  Cyber_Master_G wrote:

  After backup hard drive in a 1 to USB. I click the icon 'remove hardware safely '.  Never, I get the message "Safe to remove hardware".  You just end up taking it out, I know that's not good.

  Hello

  You also click "eject...". » ? In this case, my SD card:

  

  Kind regards.

• HP G60-535DX Notebook PC CDDVDW TS-L633M ATA Device

  I have a HP G60-535DX laptop and Norton has found a corrupt driver: CDDVDW TS - L633M ATA Device.  I uninstalled and tried to find an answer here on HP.COM, but fails.  How can I get a new driver?

  Hello:

  Please read the info at the link below.

  One of the steps in resolution 2-5 should work for you.

  http://support.Microsoft.com/kb/314060