Removed Mac OSX Lion on app store.

Similar Questions

• Mac OSX Lion does not install

  Hello

  I use ESXi 5.1 HP on the server of the Gen8 identification mark

  Install a new virtual machine to run a MAC OSX Lion

  Copied on the Mac to install OS X Lion.app in the data store.

  Started the VM which seems ok. The apple screen is popping up and spinning CD is running.

  It ends there, with no further action.

  Computer configured virtual: 8 GB 4 CPU - 300 GB disk

  Also tried on by converting the dmg to iso-> no luck

  Any idea is welcome.

  Joe

  To legally install this OS in a virtual machine, the underlying hardware that ESXi is installed on must be Apple.

  Discuss this further in these communities would be a violation of the terms of use.

• How can I remove an application from the App Store in the section update application?

  How can I remove an application from the App Store in the section update application?

  You can not delete Apps from the update tab. It's just a list

  The list is just for information purposes. Finally, they are deleted from the list on their own.

• Bookmarks drop down the list too wide Firefox Mac OSX Lion 31

  When I click on the drop down bookmarks menu, it's too wide. If there is a folder in the contents list shown far right. At the point where I'm moving the mouse on there where the contents of the folder is it disappears. Am on Mac OSX Lion. I tried to scroll on the corners and sides of the drop down list to search again for the sizing handles, but none are. It is not just Firefox 31 version as has happened for some time. Any ideas please?

  Which may be caused by the presence of a few bookmarks with a long title in the main menu of bookmarks.
  The width of a column in the list of bookmarks is in the current versions of Firefox automatically adjusted the bookmark with the longest name.
  You can check the names of the bookmarks and the longer more short.

• No drivers on the HP PhotoSmart C4580 for Mac OSX Lion site

  I have a Photosmart C4580. I upgraded my Mac OSX Lion book about 6 months ago. Reinstalled the printer software and had no problems. It is up to AT & T Uverse sent me a new gateway/modem. I have of course with the new wireless modem get the printer connected to the network. I couldn't get this to work so I decided to uninstall and reinstall the printer. When I go to the HP website there are no drivers for this printer for Mac OSX. I'm not a tech savvy person, btw. Thank you.

  It seems that you have installed the printer twice and there is some sort of bug with the printer 'offline '. I would just move forward a delete it if everything works as it should with the new printer 'lazy '.

  -Sean

• Mac OSX Lion in ESX 5.1 does not start

  Hello

  I have a virtual machine to work in "VMWare Workstation 8.x" with Mac OSX Lion (I corrected my computer to do).

  I converted this virtual machine with VMWare Converter Standalone 5.1.x in vSphere ESX 5.1 and, after the successful conversion, I properly configure the type of operating system like Mac OS Lion.

  In ESX, the virtual machine starts, but stuck with the Apple logo and the spinning wheel of progress. So my questions are:

  • Do you have advice on how to fix this?
  • How to enter in "verbose" mode in vSphere? I tried to delay the start and be ready to press the two 'CTRL + v' or 'WIN + v' or 'ALT + v', but nothing has worked.

  Thank you!

  Eddie C.

  The problem here is that you violate Apple's EULA, no one here will be able to help since it is breaking this rules of communities.

  To virtualize OS x, you must run on Apple hardware.

• Scanner HP hangs while loading, Mac OSX Lion

  Some time, I've upgraded to the new Mac operating system and scanning HP began to simply crash at startup.  I tried waiting a long period never came to see if an update would come to my computer that could solve the problem, but nothing.  I waited for the next upgrade Mac OSX, and with Mountain Lion here still does not work.  I tried to find the drivers so I could remove and reinstall them using, but drivers HP page she finished with just a message saying something to the effect of "these updates come to you automatically through a software update...". ".  I can't believe that HP gave this device and it not support.  I just got an update for it through the normal OS update, but it still broken.  If I try to use Image Capture (de facto under Mac OSX program) he struggles to do the scan, or I would just use it.

  What should I do to fix this?

  Printer:

  HP Photosmart Premium (around 2011)

  I'll tell you more details on the model, but none of the software loads on my system by which I could tell you.

  Please notify.  Thank you.

  John

  Hi JASFamily,

  Which model of the list of printers below is your printer?

  HP Photosmart Premium all-in-One Printer - C309g
  Printer HP Photosmart Premium Fax all-in-One - C309a
  Printer HP Photosmart Premium Fax e-All-in-One - C410a
  Printer HP Photosmart Premium Fax e-All-in-One - C410b
  Printer HP Photosmart Premium Fax e-All-in-One - C410c
  Printer HP Photosmart Premium Fax e-All-in-One - C410d
  Printer HP Photosmart Premium Fax e-All-in-One - C410e
  Printer HP Photosmart Premium all-in-One - C309n TouchSmart Web
  HP Photosmart Premium e-All-in-One Printer - C310a

  Follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02456650

• Use the Magic Trackpad with Mac OSX Lion emulation

  I'm working on an Asus n71jq laptop running Windows 7. Recently, I've found VMware Workstation 8 and am currently emulate Mac OS x 10.7. What I found is that my notebook computer trackpad has hamper my experience (between spaces and back flip in the pages in safari) and so, I noticed that mac had the ability to hook up with an Apple Magic Trackpad.

  I bought an Apple Magic Trackpad and started to sync it with my Mac OSx comments lion. It recognizes the pad and arrives at the stage of establishing a connection, but is still unable to pair, it is said. Then, when he said that the mac comes up with a pop up that says the trackpad wants to pair, but even if I click it nothing happens. Nothing seems to work.

  So in essense, I was wondering if VMware has the ability to sync with a Magic Trackpad, if I'm emulating a Mac OS x guest.

  I scoured internet for anyone else having this problem but I seem to be alone in this problem.

  Thank you

  You do violent potatoes SLA for this product and is illegal!  Also, any discussions of illegal activities is prohibited by the terms of community use VMware and so actually what makes the end of this discussion!

• Using OsX Yosemite and App Store continues to display the update for iPhoto...

  I have a Macbook Air 13 inch, (early 2015) use Yosemite (10.10.5).  It came with the Photos app, but iPhoto is still in my applications folder, but is grayed out.  However, from the beginning, the App Store showed that I have an update for iPhoto, (I bought it to 15 August) and it never goes away.   To try to get rid of him, I tried to update and I get two different messages "unavailable for this ID... updated" or "not available in the United States.  I had called for support and he could not know.  Of course, it does not affect the performance of the laptop but it's annoying to have constantly there.   Any ideas on how to do this, go away?  I have attached a few screenshots to show what I mean.  Thanks if someone can help (and sorry if I posted this in the community, did not find one for the App Store issues...)

  

  

  Here are some suggestions: cannot be updated iPhoto because it is not available in the App Store

• Full CS4--> CS5.5 update on Mac OSX Lion = brick wall

  I need to install my CS5.5 update on nine (empty) macbook pro installed osx lion, but I can't get through CS4 known installation issues. Help!

  You do not have to install the CS4 inorder to install CS5.5, all you need is to have the CS4 serial number.

• Where can I find software for e-all-in-one HP Photosmart C310 series Mac OSX Lion v.10.7?

  I bought the printer HP Photosmart Premium e-all-in-one C310 series yesterday night and desperately need to print today.  However, the installation disc is not supported by my Mac happening on v10.7 Lion OSX.   I read on a site that I should be able to access a software upgrade via the Apple website, but could not find the last night.  Help, please!

  Also, I loved the easy set-up using the touch screen and my wireless mode.  No cables needed!   Now, if I can get any software updated today, that will be great!

  Kelly

  Your printer works perfectly in Leo.  Indeed, pilots are probably aready in your operating system.  Get the installation program and be able to use it.  We have a doc that will guide you through the process.  (It's pretty simple)  OS X 10.7 Lion: install and use the printer with Lion

• First Pro crashes after you quit - Mac OSX Lion

  Greetings,

  Symptoms:

  I have a behavior coherent crash after quiting Premiere Pro (version 5.5.1 and 5.5.2). The complexity of the project does not seem to matter, and once it crashes, I get the prompt indicating that the application has encountered a serious error and will try to save the project. I then get the usual prompt to send to apple crash report, followed by the crash adobe report a few minutes later (must be why I see "dynamiclinkmanager" at the top for a bit after PP crashes).

  If I reopen it PP, I am prompted with a dialog box asking if I want to the last open project. If I say yes, I'm back in a crash before any active load (unexpected serious error and the will of the app must close) followed by accident yet for apple and adobe reports. Basically, I have a chance to do a project and it spoil when the application is closed.

  I am using an installation from a DVD, but had also tried the web version. I was able to create a project to couple with the web version (trial) and then when I got the DVD, I believe that I used for the update/authenticate, etc. - maybe it's where things went south (everyone is a similar trend?).  I don't think that too many mix the contents with the installation of web, DVD so the steps around how I mixed the two sources is somewhat blurred.

  For reference, I am pasting the online crash report. To reproduce, I just had to open PP, click on no when asked to open the last project of unexpectedly, and then just quit and got the crash. I didn't do anything other that accept the default values for the project in order to try to hit command-Q.

  If I can give you more information to help a repro, please let me know.

  Any help is appreciated and thanks in advance.

  Todd

  < < start crash report > >

  Process: Adobe Premiere Pro CS5.5 [280]

  Path: / Volumes/VOLUME / * / Adobe Premiere Pro CS5.5.app/Contents/MacOS/Adobe Premiere Pro CS5.5

  ID: com.adobe.AdobePremierePro

  Version: 5.5.2 (5.5.2)

  Code type: X 86-64 (Native)

  Parent process: launchd [126]

  Time/date: 2011-12-08 21:42:17.998-0800

  OS version: Mac OS X 10.7.2 (11 C 74)

  Report Version: 9

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  objc [280]: garbage collection is OFF

  terminate called without exception active

  Abort() called

  Post edited by: Jeff Bellune.  Edited for brevity.

  Perhaps due to some of your other installed?

  Given that I started this thread, I had very recently PP5.5.0 working on Lion, even w / my ATI card and it turns quite stable. I need to test more but given that the PP is the only 3rd party something on this installation of the OS and it is inconvenient to change the startup discs when I want to use other applications.

  I ended up doing dmg at each point of restoration during debugging, i.e. after the new installation of OS, then after installation, PP, etc..

  It's a bit easier to go back to the last known good state, if I got in trouble.

  I can also test updates to Adobe, but w / stability given, I (fingers crossed) not sure I want to update something that is not broken. Same w / disk images to speed things up, I'd rather be in the mix. I'll eventually do this, but right now, I enjoy being able to use PP.

  Hope that helps, I'd back things until it works, or bring up the place, make images along the way and see where things break. I'm not sure how invasive is a facility (e.g. it is really all the reversible effects) and without a new installation of the operating system as starting point reliable, I am sometimes wary of some persistent pref/dependence silently screwing things up (for example after uninstall/reinstall, same behaviour). It is a PITA, but so is the major downtime.

  Let me know if I can give you any other details/info.

  BTW, I have not mixed AE w / PP installation, but I intend to. Other major software I want to have on this installation of the OS are Digital Performer, but that will have to be on another image.

  see you soon,

  Todd

• How to configure my Mac (OSX Lion) to receive faxes directly from my HP Officejet 6500 +.

  I have a Mac OS x Lion and a HP Officejet 6500 +. I would like to save incoming faxes directly to my computer, rather than having the 6500 to print them. I installed the driver of HP6500 on Mac: print and outgoing fax jobs. Using the configuration Print & Scan on Mac System Preferences, I can select the Officejet 6500 fax, click on "receive options" and turn on "receive faxes on this computer": I got him to answer after 1 ring and save faxes to an appropriate folder.

  The problem is that the incoming faxes even print directly on the 6500 and are not registered on the computer.

  I tried following the instructions on the manual for 6500 located here: http://h10032.www1.hp.com/ctg/Manual/c02519721.pdf but the indications on page 57 for the implementation using the HP tell me to select the "applications" icon in the toolbar and it isn't here.

  Any help would be appreciated, thanks.

  Well, this got me half way there, thank you.

  Once you have installed the software which recommends ShlomiL, then you must enable the option Archive digital as described, which won't be available unless the device is physically connected via a USB cable. Wireless is not an option. The value "Digital Fax archiving" 'Save to Folder' and then choose a folder that is accessible in writing-world. The folder must be specific for incoming and used faxes for anything else! The 'Notification of incoming Fax' value to what you want.

  Then go into the front panel of the 6500 and disable printing fax. (There is an option buried under "base set up the fax / Fax HP Digital")

  Finally, create an automator workflow that automatically prints any picture of new place in the folder of incoming faxes created there are two steps. Set it to print on a printer laserjet cheap rather than ink-jet 6500 ridiculously expensive. (Or skip this step if you're ok with not having a copy of incoming faxes).

  You can ignore the options useful and well-designed integrated on your Apple about "receive faxes on this computer". HP only plays nice with that.

  I still hate the HP, but at least now I didn't spend $35 for a new inkjet cartridge every two weeks.

• Photosmart C4795 MAC OSX Lion

  Since the installation of Lion, I can no longer connect wirelessly with Macbook Pro my wife.  We have AT & T U-Verse with their 2Wire Modem/Acess Point.  I deleted the drivers and installed via software update.  I can connect USB and the only instructions I see HP for the addition of a wireless option is to add a Hello type for your printer?  I don't see this option.  I saw something on an SSID is perhaps too long.  I'm not sure that I can change it on AT & T device.  I ran the test wireless to the printer and all past.  I also checked to make sure that the mac is on the same network, and it was.

  After the reboot the 2wire driver Hello appears now and I added it and it works now.  Thanks for your help on this

• YouTube video on mac osx Lion Safari 6 and Firefox 14.1 chills

  Hello

  I use Mac OS x Lion 10.7.4 on a brand-new book of Mac of retina and have installed the latest version of flash 11.3.300.268

  My YouTube video http://www.YouTube.com/watch?v=W8m1Fc3eCM8 shiver very strongly on 6, Safari and Firefox 14.1

  If I uninstall Flash it no more - shivers on my old MBP with Snow Leopard 10.6.8 and Flash 11.2.202.235 version all works very well.

  ... so I guess that flash should have any problem with Lion?

  Thanks in advance for your ideas if I change any parameter or if there is a bug.

  There are some known problems with the macs of the retina, but these should be present in all versions 11.2 and 11.3 players and I've not seen anything video specific.  Could you try to install our 11.4 beta version to see if that makes a difference?

  07/08/2012 - flash Player 11.4 Beta 2