Rendering lost after closing the project.

Similar Questions

• Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.

  Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.
  With any other HTTPS sites that support HTTP Strict Transport Security (HST), I noticed connection only 1 history.
  How can I disable these background connections?

  Hello, I'm no expert on the matter, but it is quite possible that the spdy Protocol, which is used by google on its secure sites (twitter atm) and is causing the behavior that you have seen.

  "SPDY connections are persistent connections. For optimal performance, it is expected that clients will not close the open connections until the user navigates away from all web pages referring to a connection, or until the server closes the connection. Servers are encouraged from the connections open as long as possible, but can stop idle connections if necessary. »
  http://mbelshe.github.com/SPDY-specification/draft-mbelshe-SPDY-00.XML#RFC.section.2.1

  You can try to disable support for the spdy Protocol in firefox (in all: config) and see if that changes the number and length of connections to the server.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• Restart the problem after closing the lid of the laptop for a few minutes

  I use Windows 7 Home Premium on my Asus A53S. I have reboot issues a few minutes after closing the computer laptop lid eventhough I put what to do after closing the lid to "do nothing" for both on battery and the plug. And it will keep restarting over and over again. Rest

  Hi DennisHii,

  You did changes to the computer before the show?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• After the rendered file appear in the project Panel

  Hello guys,.

  This thing has never happened before

  In the example, I have this file in my project Panel:

  VIDEO1

  VIDEO2

  Photo3

  Music4

  When I visited a video I call, in Hello World example

  After rendering the video will appear automatically in my project Panel...

  I'll have to

  VIDEO1

  VIDEO2

  Photo3

  Music4

  Hello world

  This thing never happened to me and I'm not changing anything, this problem showed for the first time this morning and all new project I create, even a whole new project even after a reboot of the PC if I return something, the end result will be automatically added to the project Panel

  How can I fix this thing? It's very frustrating because I make a file several times to correct a few errors and every time that I have to first delete the file in the project Panel

  As mentioned yesterday everything perfect, this morning started this weird thing

  It's a post-render action. See this page for more details:

  Using After Effects | Basics of rendering and exporting

• Color change after sharing the project

  I use an iMac OS X 10.11.4, mid-2011 and FCP worm 10.2.2.  I'm processing the photos that have been color corrected from Raw files in Photoshop and imported directly into FCP.  I did no color correction in FCP (color balance) or color Board.  When I export the project over to a mp4 file format for playing on a HD TV pictures made a significant change in color.  What awaits a lot on the computer in FCP now has a bright orange tint, it is darker and more contrast has been applied.  The color setting that is applied in PS is sRGBIEC61966.  Someone has suggestions on how to fix this or is there a work-around.  FCP applies to any color automatic processing when rendering a project for sharing?

  Thank you

  No to the last question.

  This color setting in Preferences display system do you use? It must be the default.

• Equium A60-692 restarts after closing the lid

  More annoying, the only thing I can do is hold the power button to turn off & on again. Is there a key combination should I put pressure to bring its edge form after you have closed the lid, or is it a fault?

  Thank you

  Usually when the size of the memory changes, the system can recover.

  Remove the battery and the AC adapter / CC, and then remove one of the memory Modules and power on.

• Tecra 9100: Sleep Mode is no longer enabled after closing the lid

  Hello

  First post here and not the smartest when it comes to computer skills...

  Have a Tecra 9100 about 4 years old, under XP Pro SP2.

  last 3 days whenever I close the lid of the laptop it won't STAND BY mode me leaving no option but to propel to the top and I get "SUMMARY FAILURE PRESS ANY KEY."... »

  I changed any settings whatsover and since then, I tried to access the Power Saver icon in Control Panel, but when I click on it nothing happens. I then click on a few of the Control Panel Power Options and I get the message "...". "a Microsoft power options and use the Toshiba power Saver saver" which obviously I can't access either!

  Is there any reason why closing the lid of my laptop is no longer 'Stand by' mode, basically going in OFF format only, it became a major drawback and don't know where to turn to.

  Any help or advice would be greatly appreciated.
  Thanks in advance.

  Hello

  Reading your post I guess windows on own power options and doesn t use Toshiba power saver power profiles.

  Generally, the issue should be resolved by switch again to the Toshiba power saver in the-> power options control panel! But your announcement about turning the power on, it is not possible! It s very strange?  :|

  In this case, I recommend to remove the Toshiba installation energy saver. This can be done in the Add & Remove programs.

  So finally, check out the following steps:
  Remove the energy saver, restart the laptop, reinstall the Toshiba Common modules, reboot the laptop and install again the energy saver.

  After this procedure, the splash screen should work! By the way; the hibernation mode is disabled by default. If you want to use the Hibernate mode, you will need to enable it first!

• Missing database after closing the App

  One after the other, I recently doing listviews to my SQL database, but I had a problem. When I close the application and reopen it, some of the databases have disappeared. Here is the picture:

  Before closing the application:

  

  After the closing of the app and relaunch:

  

  What makes that happen, and what is the solution for this problem? Any help would be appreciated.

  Thank you.

  problem solved, it is just because of variable conflicts in the service of loading, thank you

• After closing the dialog box screen, menu by default is displayed

  I have a simple program that consists of a screen and a button. When the button is clicked, it displays a dialog box in the button handler. Once the dialog box is closed, the parts of the menu are displayed. Very strange.

  Here's the code that displays the dialog box:

  public void fieldChanged( Field field, int context )
      {
          String label = "";
  
          if ( field instanceof ButtonField )
          {
              label = ((ButtonField)field).getLabel();
          }
  
          //if this was the login button, display the popup.
          if ( label.equalsIgnoreCase( "Login" ) )
          {
              String icon = "questionmark.png";
              Bitmap bitmap = Bitmap.getBitmapResource( icon );
              String [] options = new String [] { "Yes", "No", "Cancel" };
              int [] optionIndexes = new int [] { Dialog.YES, Dialog.NO, Dialog.CANCEL };
              Dialog dialog = new Dialog( "Select an option", options, optionIndexes, optionIndexes[2], bitmap );
              dialog.doModal();
  
          }
  
      }
  

  Once the dialog box is closed, this is:

  

  I have no idea why this show after the closure of the dialog box. Any ideas?

  Well done

  I think that many people would find answers to their questions if they tried harder with search.  And you find faster as well!  And whenver I creative search, I usually find something else useful that I was looking for.  Kind of like Google where you can go off on a complete tangent...

  In any case, can mark you this as resolved?  See you soon

• Refresh the Parent page after closing the popup

  Hello

  I open the pop for that insert data and then I want to see the page parent page refresh after closing of pop either perform cancel or closing popup using X.

  try like this

  	< af:commandLink text = ' #{rank. " DEPTNO}"id ="cl1"partialSubmit ="true"returnListener =" #{backingBeanScope.backing_DeptDBFace.backFromPopup} ">
  	"" < af:showPopupBehavior popupId = ': p1 ' triggerType = 'action' / >
  	< af:returnActionListener value = "10" / >
  	< / af:commandLink >

  When this method ({. backing_DeptDBFace.backFromPopup}) contains the PON - Stmts which are not executed after the closure of the pop-up window

  Thank you

  Venaktn

  Hello

  Try to use the popupCanceledListener. (af:popup)

  This event will happen only when you click the X or cancel the popup.

  Kind regards

  Ruben

• First elements 12 is cutting images after completing the project

  I recently completed a video clip and after the finalization of the draft project and saving it down like a wmv. file, I saw the video and parts have been cut. I use a lot of green screen keying in my videos and sometimes the top of the head of the people will be cut off and images are not aligned to the way I had them in the editing program. This only happens after I save and share the project, but still everything seems fine in the editing window. No heads or members are cut off and the back ground images for the look of effect green screen well in the editing window, once again the project is saved in the background images are not be stretched across the screen as they appear in the editing program. I don't understand why this is happening and I am looking help before I resort to changing my work once again.

  Case & point, why do I see in the edit window different from what I see after the project is completed? Help, please!

  screamindemon

  What operating system is running your 12 items first? For now I'll assume Windows 7, 8 or 8.1 64 bits in the cases where I need to mention details.

  What you describe is probably an incompatibility of the parameters of the project to import and export. If we start with the details.

  The project is set automatically to the preset or project that you have? (See change project Menu/Settings/general and readings for the Mode edition of time base, image size and Pixel Aspect Ratio even if they seem to be grayed out).

  What are the properties of what you put on the timeline of the project? Do the properties of the match source media details of the preset program you use.

  Then most likely to cause the problem... your export settings.

  What you have written, you probably use

  Publish + share

  Computer

  Windows Media

  Now the important part, that you choose for 'Presets' and what are your settings on the tabs in advanced and Audio of the selected preset button/video?

  The answers will be your contact information.

  If you have any questions about what is written or need clarification on this, feel free to ask. But the answers are the need for all of the foregoing.

  Thank you.

  RTA

• Web site will not disappear after closing the tab AND restart Firefox.

  I went to a website to watch a video, and when I had finished I closed the tab on what the site was. When I had finished on my computer, I closed Firefox. The reopening of Firefox later he restored the page. I don't know why it does this, and I can't make it disappear. I deleted all my cookies/cache, etc., as well as do a virus scan and nothing can tell me why this is happening. It's pretty boring, and I would that my browser to work properly. I've recently updated to the latest version of Firefox, so everything is up-to-date. I'll take any suggestions anyone can throw on me because I am fresh out of ideas.

  Thanks in advance.

  Hello
  Thanks for letting us know about your problem. The problem can be solved very easily. Just reset your Firefox and your problem can be solved. To reset instructions, please see this article Firefox Refresh - reset the parameters and modules

  Please let us know if your problem cannot be fixed by above mathod.
  Concerning