Rendering with GPU Quadro K2200

Similar Questions

• GPU Quadro K2200 is supported by Adobe CS6 Suite?

  GPU Quadro K2200 is supported by Adobe CS6 Suite?

  I use it at the office right now there are always better maps out there but mine seems to do the job (budget restrictions office side)...

• I use an AMD Radeon R9 390, rendered with GPU in Media Encoder takes forever. Am I missing something?

  The title says it all.

  I do video in Adobe Media Encoder, but my 20 Minute video takes up to 55 Minutes to restore (1080 p, 10 Mbps). Normally, I should be able to return with OpenCL, but my use of the graphics card is 1% (24% CPU) and Ram at 25%.

  I used an NVIdIa graphics card, and I'm pretty sure that made with the card NVidia is much faster although the R9 is much better.

  So, I'm not an expert. Is there something that I am missing? Is there something I can do?

  Thanks for your time,

  MondRubberduck

  All use CUDA... read this

  creation http://blogs.adobe.com/premiereprotraining/2011/02/CUDA-Mercury-playback-Engine-and-Adobe--pro.html

• Impossible to activate CUDA on Quadro K2200

  Hi, I recently bought a Nvidia Quadro K2200 equipped of 4 GB ram and 640 CUDA core. However, when I try to enable CUDA in After Effects (CS6 and CC) I can not, the option is not available.

  I did the thing to add the map manually in the 'raytracer_supported_cards' list but then executing EI GET the message "After Effects error ray traced 3D: initial shader compilation failed (5070: 0). In this case, the program runs normally and the option to enable the GPU is now available on "Edit/Preferemces/Preview", but there is no improvement in performance and when I try to use the 3D Ray Traced feature I get the error message again.

  I know that this graphics card is fron the latest Quadro family and even his name is not on the official list supported CUDA cards as well as the K4200 and K5200 and other press releases, will therefore be the problem? Fact there is incompatibility between the software and the new Board of Directors?

  Remembering that I tested the two AE CS6 and CC, duly updated to date to the last date and the last drivers Nvidia.

  Can someone help me?

  (Sorry for my bad English)

  This card is not supported for GPU of the 3D rendering engine acceleration traced to the RADIUS, and it will never be.

  NVIDIA has changed new cards Maxwell CUDA features, as they are incompatible with the version of Optix (the library that powers the traced the beam 3D rendering engine) that comes with After Effects.

  For many reasons, we have stopped development on the traced the beam 3D rendering engine, so we will not issue updates that allow these new cards work with this feature.

  If you work with 3D in After Effects, you have many choices, which is superior to the use of the traced to the RADIUS engine 3D rendering, including Cinema 4 d, which is included in After Effects.

• ZBook 17 G3: ZBook 17 G3 with nvidia Quadro M2000M

  That's right - who's wrong... If any?

  I have a G2 470 ProBook Revit and Autocad Architecture running G6W69EA and it does not work well.

  So I think buy a ZBook 17 G3 instead, and comparing the different specifications, I came across this:

  According to NVIDIA to http://www.nvidia.com/object/quadro-for-mobile-workstations.html the Quadro M2000M made for the Platform 15.6 ".

  Among other things, HP ZBook 17 G3 - T7V62EA #ABY is built according to the specifications of HP with the Quadro M2000M, however it NVIDIA should be the M3000M when it is on a platform 17.3 ".

  Is this perticular ZBook good built, or is - this 'money by windows' not go for something like the Y6J67EA with Quadro M3000M place?

  There is nothing wrong with the 17.3 "and the combination of M2000M.

  The M2000M is enough for most use Revit and Autocad.  Very complex models may require the graphics power of addition, where intermittent 3D rendering or low complexity models can work very well with less graphical power.

  Windows 7 configurations are always available because some big company facilities have not yet standardized on Windows 10.

• No rendered OpenCL GPU

  OpenCL is clearly supported on my iMac, because the OpenCL_NBody_Simulation_Example sample code Apple provides performance of incredibly fast GPU rendering, with less than 2% CPU Overload.

  However, the GPU is not used by FCPX or compressor for any type of output. He doesn't doesn't matter if I use the FCPX easy sharing, or the function export on the compressor or the compressor directly. No setting uses GPU. The activity monitor shows nearly 300%-400% CPU rendering/share.

  Help!

  Configuration:

  'Use the GPU to process the content of Final Cut Pro' is checked in the Advanced tab preferences of compressor.

  iMac (retina 5K, 27 inches, end of 2014) with 32 GB 1600 MHz DDR3 memory

  AMD Radeon R9 M290X 2048 MB

  OS X El Capitan 10.11.1

  Compressor 4.2.1 Build version 269216

  10.2.2 Build version 269216 FCPX

  What exactly are you calling? Video files in H.264 or master ProRes H.264 won't need treatment of the GPU.

• When Adobe change a Cuda_Supported_Cards for Adobe Premiere Pro CS6 for Quadro K2200, Quadro M4000 and M5000 Quadro Quadro M6000

  Dear Sirs, as a user of Adobe software, I bought the Adobe Production Premium CS5.5 for much money, after I purchased an upgrade for the Adobe Production Premium CS6.

  For my part, I see no need to upgrade to Adobe Creative cloud that these packages are not enough for me and my hobby.

  If so, you accept me as a good customer, Wouln't edit you an update in the GPUsniffer.exe and the 'cuda_supported_cards' and 'raytracer_suported_cards' to the current criteria.

  Adobe Production Premium CS6 is always available in the Adobe store, how did Adobe doesnot keep their software up to date?

  I plan to buy one of the cards mentioned above, Quadro K2200 or Quadro M4000 appear not on the list.

  My PNY Quadro 4000 last year broke down, 2 weeks before my warranty expired, but did not have a support or replacement of PNY.

  So I lost again €900,00.

  Mr President will consider you my question?

  While it is still sold, CS6 is OUT of USE and is no longer supported or updated

  creation http://blogs.adobe.com/premiereprotraining/2011/02/CUDA-Mercury-playback-Engine-and-Adobe--pro.html

  If your nVidia card at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a 'support for the cards' file - and Mac http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

• Adobe Premiere Pro does support the rendered assisted GPU on NVIDIA GeForce GTX 960 M?

  I am planing on buying a laptop Asus Rog G551VW-Fl052T containing an NVIDIA GeForce 960 M GTX and video editing with it using first pro and the gpu to help rendered. After searching trough the requirements here I couldn't find it. Then I saw this video on a similar laptop computer with a gpu are not not in the requirements works very well with gpu assisted rendering. Now I don't know if it works or not?

  I expect an answer, thank you!

  They do not have a list within the PrPro of video cards 'supported' as they did... so... your job is to make sure that the video card in use is at least to the standards. IF the map these standards... very well. Someone asked why PrPro has not choose to use its old GPU... that had only 512 MB of vRAM. He used this card with previous versions of PrPro, thought that it should always work. Nope... the minimum usable is now 1 GB of vRAM. It. you're fine... the list gives a choice of 2/4 GB of vRAM.

  In addition, for a cut card from nVidia, something above 1000 hearts CUDA is as important. This is a problem with the map you speak... support nVidia it lists to 640 carrots. It is quite low.

  I suggest you check during the Hardware forum... There are a lot of discussions on laptops as well as desktop computers.

  https://forums.Adobe.com/community/premiere/hardware_forum

  Neil

• Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  jasonf18090788 wrote:

  I saw on the Adobe site that the video card is compatible with AE Pr, but not work.

  Where have you seen that? It is not on the list of the AE: system requirements | After Effects

  Keep in mind that After Effects uses only the GPU for one, outdated thing. GPU very little matter for AE. See this: features GPU (CUDA, OpenGL) After Effects CS6 and after effects CC

• iMac crashes with gpu reset from model

  Hi guys,.

  Since that I've updated to El captain, my iMac does not last over 5-10 minutes. He continues to break up with a black screen or gray, for the most part by watching youtube.

  In the Console, I found a lot of crashes with "GPU reset":

  Wed Jan 27 19:34:24 2016

  Event: GPU Reset

  Date/time: Kill Jan 27 19:34:24 2016

  Application:

  Path:

  OS version: Mac OS X Version 10.11.3 (Build 15 d 21)

  Graphics hardware: AMD Radeon HD 6970 M

  Signature: 0

  Report data:

  GPURestartReportStart

  ------------------------

  Hung channels: PM4

  ------------------------

  AccelChannel [00]: PM4

  Pending order from: UnknownCtx

  PendingCommandTimestamp: 0x00000001, TotalDWords: 0 x 00000415, GART Offset = 0 x 0000000040080000, stamp_idx = 0, estamp = 0 x 00000001

  PendingCommandStart:

  PendingCommandEnd

  ------------------------

  [00] HWChannel PM4: enabled, NotIdle

  LastReadTimestamp: 0x00000000

  NextSubmitTimestamp: 0x00000002

  [PM4, ts:0 x 00000001]: no waiting semaphore

  [PM4, ts:0 x 00000001]: semaphore signal: 0xffffff8049d66e00

  HWSemaphore 0xffffff8049d66e00 Signal Event: [PM4 channel [0] TS:0 00000001 lastReadTS:0 00000000 x x]

  ------------------------

  HangFlags 0 x 00000006 GPU: AsicHangState 0 x 00000006, AsicResetRequirement 0x00000002

  IndividualEngineHang: 0

  NonEngineBlockHang: 1

  FenceNotRetired: 1

  PerEngineReset: 0

  FullAsicReset: 1

  HangEngineBitmap: 0x00000000

  ------------------------

  PCIe AMDBartsGraphicsAccelerator material: [1:0:0] State: ENABLED

  Configuration: deviceBits: 0 x 00816720, capabilityBits: 0 x 30940100

  TotalVideoRAMBytes: 0 x 0000000040000000 (1073741824)

  ------------------------

  [00] engine PM4: enabled, NotIdle

  [00] PM4 Channel: enabled, NotIdle

  ------------------------

  [01] engine AIMS: enabled, Idle

  [01] DMA channel: enabled, Idle

  ------------------------

  [03] UVD engine: disabled, Idle

  [02] UVD Channel: disabled, Idle

  ------------------------

  [04] engine SPU: disabled, Idle

  [03] SPU Channel: disabled, Idle

  ------------------------

  : * GPU Debug Info check out *.

  : 0 00006720: 0 00000092: 0 x 00000001 x x: 0 x 00000018: 0x0000a880: 0x00000001: 0x00000001: 0 x 00006720

  ...

  complete log can be found here:

  https://drive.Google.com/file/d/0B0vWxunrQlxuLXRHd184dlhUZTQ/view

  If I'm lucky, it will restart, but sometimes I'm stuck on a gray boot screen

  I tried:

  -Reset the PRAM

  -force the disk check

  -unplug and wait 30 seconds.

  I'm out of ideas

  The SMC reset 2 - 3 times to reset the management system (SCM) controller on your Mac - Apple Support disconnect at the back of the iMac not the wall.

  Try a boot sure try safe mode if your Mac does not end commissioning - Apple Support

• Develop gets another color profile with GPU speed

  I had problems after the last update of Lightroom CC 2015.5.1 version:

  1. I lost my color profiles. I know how to solve this problem, it is not a point of interest;

  2. I see different colors in library mode and develop with GPU acceleration mode on. It's the same situation with regard to the FIRST both in regards to JPEG files. It can be fixed only by disabling GPU acceleration which is not a better way.

  Did anyone get the same problem with the last CC Lr? How do solve you?

  See this post for a possible solution: library vs Developping

  You probably have a faulty monitor profile.

• SpeedGrade CC 2014.2 build 8.2x51 reading smoothing / jerky 4K with GPU R9 295 x 2 - it uses only 2 GB of RAM (8.1 Windows 64-bit), Mac OS - same problem

  Hello, guys

  I have following configuration:

  I7-5960 x 4.3 GHz

  32 GB DDR4 RAM

  ATI 295 x 2 8 GB (Gpusniffer.exe watch 3072 MB on each unit of Hawaii)

  Samsung XP941 Ultra M.2 (> 1000 Mb/s)

  Some 850 Pro SSD for H.264 4 k source

  Latest version of Speedgrade CC 16/02/2015 (DUAL MONITOR SETUP - 2560 x 1440 for Interface and 4096 x 2160 for previewing)

  I work with a lot of short 10-15 seconds 4 K 4096 x 2160 24 fps H.264 clips of Panasonic GH4. Import their first CC as some stabilization warp, cut them, save the project and opened in Speedgrade CC all are fantastic smooth in first CC.

  Speedgrade - a simple color - exhibition, some keyframes and simple scoring correction for certain substances. I use the GPU acceleration for sure have lots of 4096 x 2160 4K 24 fps. But it is not flexible and smooth after that a correction is applied. Everything is jerky and freezes the first seconds, when I press 'PLAY'. I used resources, the Manager monitor tasks (Winodws 8.1 64-bit) and Afterburner. And there's what I discovered:

  • Afterburner shows the use of mono-GPU (as we know it for playback only 1 GPU used) the same amount as in first. SpeedGrade CC use 2, 5 GB of VRAM. Also, if I use one zero effect - accelerating gpu, like "transform", for example, imported first, I get "not enough GPU resources" message in Speedgrade. Afterburner shows, CC Speedgrade tried to use more, and then Max 3GB available VRAM during that time. So I turn off these effects, before you open a project in Speedgrade.
  • CPU is low (15%) use, perhaps a little lower, then in the first CC
  • Disc - 3-10%, H.264 is weak on this subject
  • RAM! -is the problem. I have been authorized to use the 29 GB of RAM for Adobe apps. Speedgrade CC use no more then 2-3 GB according to the the Task Manager (for most 2 GB) and 8.1 Windows resource monitor 64-bit Pro. After I finished with the color correction, a project open in first DC, work with lumteri on smooth and! First CC use 9 to 10 GB of RAM to play the same music video in full resolution smoothly!

  
  

  I already reinstalled everything, including drivers for the GPU, 8.1 for Windows and Adobe CC even result.

  MacBook Pro 15 retina end 2013 with i7-4960HQ/16 GB of RAM/Geforce 750 m UPDATE!

  Under Mac Os Yosemite 10.10.2 - same situation here. First CC use 5 GB (of 11 GB of available) 4096 x 2160 Prores 422 HQ and is usable, smooth with a few drops of frame.

  SpeedGrade CC uses 2.5 GB RAM of 4096 x 2160 and it is impossible to use plenty of 4096 x 2160. Only 1/2 resolution of overview is smooth and usable on the screen of the laptop. 4096 x 2160 externally connected through Thunderbolt monitor, it's a lot rougher, I think it's hard for 750 m with 2 GB of VRAM.

  UPDATE! Previous version (CC 2014) of first CC and CC Speedgrade Windows 8.1 64-bit - even situation.

  
  

  What do you think?

  
  

  My opinion - Speedgrade CC is not optimized for 4K resolution. First CC is good for 4K.

  BTW, for more information, latest AMD catalyst driver 14.12 omega has a problem with my R9 295 x 2 and engine reading Mercury (MPE) OpenCL - just black with sound screen, when I turn on the GPU acceleration. So I use the previous version of 14.9. With 14.12 GPUsniffer.exe found a device with 4 GB of VRAM GPU and a GPU with 3 GB of VRAM (normally obligatorily 3 + 3 GB 295 x 2 Dual GPU radeon chip).

  Yes

  So, finally, Speedgrade CC works 95% smooth time with 4096 * 2160 H.264. But it was necessary to turn off all effects in first Pro CC. Nothing new. I found a few discussions on this fact, but after that I spent some time with experiences.

  Stabilizer Warp even alone is enough to make Speedgrade CC really agitated. 'Transform' effect simply blocks Speedgrade CC with "GPU resources.

  Each effect uses some VRAM (for Warp stabilizer 200-300 MB). After you have disabled all effects had load VRAM under/near 2 GB for the little clip 4096 * 2160.

  First CC flies simply with unique x 290 or 295 x 2 (which is the only x 290 during playback). Even 3GB VRAM available software Adobe CC.

  PS Macbook Pro retina 15 "with Geforce 750 M 2 GB VRAM would work smoothly with Prores to half a preview/playback resolution - 2048 * 1080. CC CC SpeedGrade or Premiere Pro with 1/2.

• Cuda not refreshing preview with a quadro... WHA?

  Well, I have a weird problem with Premiere Pro 2014.

  I'm editing on a completely new fairly decent Windows system: 8.1 Win pro 64-bit, 32 GB Ram, SSD and records all external references on the stroke of lightning 2 with a quadro graphics card running 2200.

  I am currently editing the images of Dragon k 6-1/16 preview with all plugins turned off (a lot of time remapping, however).

  Problem I have is that when running with cuda when I turn on the securities or (i.e. to watch the trail under the top) or even the simplest plug-ins or motion Panel (position or opacity) to change the preview window is not kept up-to-date until I move the cursor in the editing window.

  This makes editing infuriatingly slow, any thoughts would be very welcome.

  Tried clearing the cache, OpenCL is so incredibly slow and read by software while it works just kills me with the offset. Currently in RED movie editing mode.

  This could be a problem with the video preview format?  Other options on the PC that I have-Frame Mpeg (to 2.4:1 i.e. 1920 x 800)?

  Thank you

  Exactly what version of CC2014? From the output of 2014.2, today there was 4 versions.

• Engine Mercury works only with NVidia Quadro cards?

  Fellow Forum members,

  Prices for NVidia Quadro cards are INCREDIBLY expensive. Finally, I checked the prices were as shown below:

  Quadro 6000 = $4,000

  Quadro 5000 = $1,800

  Quadro 4000 = $1,000

  My question to someone there is '' done the Mercury Motors CS5 for After Effects and Premiere Pro exclusively work onlly with Nvidia Quadro series cards? ''

  If the answer to my question is NO, then I would that this thread can be dedicated to the sharing of alternative solutions for graphics cards that will not burst his portfolio.

  My motherboard supports technology ATI CrossFireX Quad, 3 - Way CrossFireX and CrossFireX and NVIDIA Quad SLI, 3 - Way SLI, and SLI technology.

  My way of thinking, that's if I could use two or three ATI cards bridged together to match 80% of the performance of Quadro 6000 at a fraction of the cost, I'd be happy.  However, the bump in the road is if the motor Mercury of CS5 is compatible with bridged ATI graphics cards together?  Motor Mercury of CS5 cares what type of graphics resident cards into the motherboard in order to deliver 100% of the performance?   Any information will be greatly appreciated. Thank you.

  Hello

  In addition, CS5 does not use SLI technology

  It uses only 1 graphics card

  This thread explains some good stuff

  http://forums.Adobe.com/message/2791699

  information seems accurate

  hope this helps

  j

• No help no wiggle effect when rendering with Media Encoder

  Hey!

  I wanted to make my project (by 'add an AE project') media CS4 encoder. After the rendering process

  My effects wiggle that I asked my images did not regard and seemed not at all. When I

  make right with AE4 work.

  I need to change settings or choose a special format in media encoder?

  I would be happy to answer!

  best,

  Alex

  Unfortunately, this is a bug in Adobe Media Encoder - it does not properly handle expressions, if they are created in the default language. If your AE works in English but in German, SOUL SOUL runs the instance of AE context it uses to manage the AE projects also in German and your break expressions, because they are language-specific. Nothing, that you can change. To work around the problem, consider using the wizard to Convert the Expressions into keyframes keyframe before rendering with SOUL. For some layers with simple stuff that should be acceptable, but of course it will be a nightmare with many expressions.

  Mylenium