Reorganization of the elements in the records of libraries

Similar Questions

• Did I download photoshop elements 13 because I lost my CD.  The recording shows on my Adobe account.

  I misplaced my installation of Photoshop 13 CD and my computer has been reformatted.  I record and have the serial number of the registration.  I can download the program because I lost my CD.  The recording shows on my Adobe account.

  Hello

  See the link below for download: -.

  https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html

• I had to reset my computer and now I am unable to install Photoshop elements 12.0. I have the record, but can not find where to install

  I had to reset my computer and now I am unable to install Photoshop elements 12.0. I have the record, but can not find where to install

  Hello

  Please Photoshop elements help | Download Photoshop Elements | 10, 11, 12, 13

  Hope that helps!

  Kind regards

  Sheena

• I am trying to record my Photoshop elements 8 product so that I can access my serial number.  Yet, when I go to the registry, the 'Record' Option is greyed out and I can't select.  All other options in the menu are available to be

  I am trying to record my Photoshop elements 8 product so that I can access my serial number.  Yet, when I go to the registry, the 'Record' Option is greyed out and I can't select.  All other menu options are available for selection.  I have a PC.

  He was already registered?  If so, how can the computers?

• Thunderbird eliminated most of the records online and will not let me create new ones to replace them and read email stored in them.

  In order to remove online a large number of files in a folder (a folder IMAP?), I deleted the folder and then created a new folder with the same name. The next time I open Thunderbird, all my online except sent and trash folders disappeared, and I could not re - create files that have been deleted. I can't access the files stored in these folders or move files in folders bearing the names of deleted files. I can create files with names not used before. But I can't create a new folder of Junk to hold files that Thunderbird regularly sends to junk. I do not receive e-mail in the process. Local folders are not affected hereby. What can I do? I have Thunderbird 24.5.0. Thanks for any help.

  Go to file / subscription and see if you just without subscription to records.

  Check folders and make sure EVERYTHING is checked.

  Learn how to use several methods of selection and do not delete the records that you want to keep.

  control + a = select all

  Click heading 1, move upwards or downwards several items and maintain the SHIFT key while clicking the point 2 = selects items 1 and 2, and between the two

  Hold down the CTRL key while clicking random objects = selects any element clicked on

  Hold down the CTRL key while clicking on a selected item = deselect this item

• Initialize the record with constants type

  Hi all

  I need to initialize the record type that has 3 fields with constants.

  Please find the code example:

  DECLARE

  P_rec RECORD TYPE IS

  (

  ID1 VARCHAR2 (50).

  CLID VARCHAR2 (50).

  P_ID VARCHAR2 (50)

  );

  TYPE p_rec_tab IS TABLE OF THE p_rec;

  v_p_rec_tab p_rec_tab

  : = p_rec_tab ((«PA1», '1', «A»),)

  ('PA2', '2', 'B').

  ('PA3', ' 3 ", 'C').

  (WOULD BE "PA4', ' 4 ','),

  ('PA5', '5', 'E')) ;

  number of v_count;

  BEGIN

  v_count: = 0;

  BECAUSE me IN v_p_rec_tab. FIRST...

  v_p_rec_tab. LAST

  LOOP

  v_count: = v_count + 1;

  dbms_output.put_line (' a record number: ' | v_count);

  Dbms_output.put_line (' v_p_rec_tab.id1:' | v_p_rec_tab.id1 (i));

  Dbms_output.put_line (' v_p_rec_tab.clid:' | v_p_rec_tab.clid (i));

  Dbms_output.put_line (' v_p_rec_tab.p_id:' | v_p_rec_tab.p_id (i));

  END LOOP;

  END;

  Exception, I get:

  ORA-06550: line 12, column 24:

  PLS-00306: wrong number or types of arguments in the call to 'P_REC_TAB '.

  ORA-06550: line 11, column 18:

  PL/SQL: Ignored Element

  ORA-06550: line 22, column 13:

  PLS-00320: the declaration of the type of the expression is incomplete or incorrect

  ORA-06550: line 22, column 4:

  PL/SQL: Statement ignored

  Try the below

  SET SERVEROUTPUT ON

  DECLARE

  P_rec RECORD TYPE IS

  (

  ID1 VARCHAR2 (50).

  CLID VARCHAR2 (50).

  P_ID VARCHAR2 (50)

  );

  TYPE p_rec_tab IS TABLE OF THE p_rec;

  v_p_rec_tab p_rec_tab;

  number of v_count;

  BEGIN

  v_count: = 0;

  SELECT * COLLECT in BULK IN the v_p_rec_tab OF

  (SELECT 'PA1', ' 1', 'A' FROM dual UNION ALL)

  SELECT 'PA2', '2', 'B' FROM dual UNION ALL

  SELECT 'PA3', '3', 'C' FROM dual UNION ALL

  SELECT 'PA4', '4', would be "OF double UNION ALL

  SELECT 'PA5', '5', 'E' OF THE double);

  BECAUSE me IN v_p_rec_tab. FIRST... v_p_rec_tab. LAST

  LOOP

  v_count: = v_count + 1;

  dbms_output.put_line (' a record number: ' | v_count);

  Dbms_output.put_line (' v_p_rec_tab.id1:' | v_p_rec_tab (i) .id1);

  Dbms_output.put_line (' v_p_rec_tab.clid:' | v_p_rec_tab (i) .clid);

  Dbms_output.put_line (' v_p_rec_tab.p_id:' | v_p_rec_tab (i) .p_id);

  END LOOP;

  END;

  ----- OR --------

  SET SERVEROUTPUT ON

  DECLARE

  P_rec RECORD TYPE IS

  (

  ID1 VARCHAR2 (50).

  CLID VARCHAR2 (50).

  P_ID VARCHAR2 (50)

  );

  TYPE p_rec_tab IS TABLE OF THE p_rec;

  v_p_rec_tab p_rec_tab: = p_rec_tab();

  number of v_count;

  BEGIN

  v_count: = 0;

  v_p_rec_tab. EXTEND (5);

  v_p_rec_tab (1) .id1: = 'PA1 ';

  v_p_rec_tab (1) .clid: = '1';

  v_p_rec_tab (1) .p_id: = 'A ';

  v_p_rec_tab (2) .id1: = 'PA2;

  v_p_rec_tab (2) .clid: = '2';

  v_p_rec_tab (2) .p_id: = 'B ';.

  v_p_rec_tab (3) .id1: = 'PA3 ';

  v_p_rec_tab (3) .clid: = '3';

  v_p_rec_tab (3) .p_id: = 'C ';

  v_p_rec_tab (4) .id1: = 'PA4.

  v_p_rec_tab (4) .clid: = '4';

  v_p_rec_tab (4) .p_id: = ';

  v_p_rec_tab (5) .id1: = 'PA5.

  v_p_rec_tab (5) .clid: = '5';

  v_p_rec_tab (5) .p_id: = 'E ';

  BECAUSE me IN v_p_rec_tab. FIRST... v_p_rec_tab. LAST

  LOOP

  v_count: = v_count + 1;

  dbms_output.put_line (' a record number: ' | v_count);

  Dbms_output.put_line (' v_p_rec_tab.id1:' | v_p_rec_tab (i) .id1);

  Dbms_output.put_line (' v_p_rec_tab.clid:' | v_p_rec_tab (i) .clid);

  Dbms_output.put_line (' v_p_rec_tab.p_id:' | v_p_rec_tab (i) .p_id);

  END LOOP;

  END;

• For all the records for each record double, I need to get a single column with null or 0.

  Hi all

  I have a requirement where I need to get all the records, for each record in double, I need to get a single column with null or 0.

  create table a1

  (

  Identification number,

  VARCHAR2 (100), the point

  part varchar2 (100));

  Insert into a1

  values (1, 'ABC', 'A1');

  Insert into a1

  values (2, 'DEF', 'A2');

  TABLE A

  PART ITEM ID

  1 ABC A1

  1 ABC A1

  1 ABC A1

  DEF 2 A2

  DEF 2 A2

  3 DEF A2

  O/P

  PART ITEM ID

  1 ABC A1

  1        ABC             0

  1        ABC             0

  DEF 2 A2

  2       DEF              0

  3       DEF              0

  Thanks in advance.

  Thanks for your help FrankKalush...

  This one will work.

  WITH got_r_num AS

  (

  SELECT NVL (a1.id, a1.id) as id

  NVL (a1.item, a1.item) AS element

  NVL (a1.part, a1.part) IN the framework

  a1.id AS a_id

  ROW_NUMBER () OVER (PARTITION BY a1.id

  ORDER BY NULL

  ) AS r_num

  BY the a1

  )

  SELECT id

  element

  CASE

  WHEN a_id IS NOT NULL

  AND r_num = 1

  THEN part

  ELSE ' 0'

  END in the framework

  OF got_r_num

  ;

• How to insulate the record insertion on a block of other blocks

  Hi all

  I am facing a problem in inserting record on several blocks. Let suppose that there are three blocks A, B and C user is inserting record in the block in the user Meanwhile jumped to block B and inserting record start here and then commit those changes. Inserting record on block B is failed due to validation on block A, where user left between the two and jumped to block B and application form for incomplete registrations. However, on the block B, all elements are validated but still ask to enter data block has.

  It is possible that if the user enter the record in the current block and forms insert record in that block and validate any changes on other blocks. I tried insert_record; integrated into the insert record but did not work. An idea to get out of this situation that I would be grateful.

  Thank you.

  A form module is treated as a single unit of work or of a single transaction. Either you save all data in it or anything. If you have a logic which must be stored separately from each other, so you should design your modules accordingly, in your case, create different form-Modules for different blocks. Everything else will only cause problems and is not the way to form of work.

  Message geändert durch AndreasWeiden

• Rich Table: entity validation fails, but the user can change the record! : O

  Hello
  I develop with JDeveloper 11.1.2.1.0 and I have the following problem. I have a rich table editable according to entity/view with a line entity level validator method that checks the consistency of rank according to custom rules.
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?
  Thank you
  
  Roberto

  Roberto R SCC wrote:
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I > know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?

  When you change a line, it is the currentRow on the iterator. You do not want any line to become the currentRow.
  I would go to this topic, in this way: substitute the selectionListener table and the listener to custom selection, check if the current currentRow (the one you are editing) isValid (EntityImpl::isValid).
  Proceed with the treatment of the selection event only if it is validated... You could even show an error or a warning message asking the user to provide valid data and even commit the line before choosing another.
  (Sorry, don't have an example of a code of practice now)

• How do the records in the query immediately after committing?

  Hello. I have a form that saves the data in the two tables. After filling out the elements of a block, the file is saved and is generated a specific sequence number. Then immediately goes to another block to fill several items he is using some values of the previous block and using the generated sequence only. based on the record previously committed. The problem is, although I can see the recording of the first block in the database, my request on the following using the generated sequence block only. does not produce output, probably because I haven't left the form again and I use the same session. However, I need this in the same session. How can I solve this problem? Thank you very much and I hope you understand what I'm saying.

  Thanks, but I already did. And it just says: query caused no records to retrieve. Anyway, I solved the problem. I put my request in the trigger after posting and it worked fine. Thank you

• Cannot query the records to a temporary table

  Hello. I have a procedure that fills a temporary table. After that, I need query the records from the temporary table. I tried to run a report after the execution of the procedure, but it doesn't show any output. I checked the procedure and it works very well cause I can query the records when I tried passing the output of an 'ordinary' table But I need to move to a temporary table and need to interview there. How can I do this? Help, please. Thank you.

  Now, it works. I found the solution. Instead of using the text of two elements, I used global variables. I thought I already did, but I guess it was at the beginning, when I have not used the query in the From Clause. Thanks a lot to you Abdetu, Inol, and Andreas for assistance. I learn a lot from you guys. I couldn't solve this without your help. Keep it up and God bless you.

• Audio synchronization is disabled at the end of the records

  Hello

  I have a few tapes. Format AVI which were made earlier this year. The files were made using a black magic capture card and their recording Media Express program.  These recordings are about 2-3 hours long.

  I discovered that although the audio is synchronized at the beginning of the records, it is disabled by as much as 1 to 2 seconds before the end of the recording.

  Is there a way to first Elements 8 to correct the audio so that it is correctly synchronized during the registration?

  Thank you!

  Welcome to the forum.

  Unfortunately, you have filed for the subforum tips & tricks, which is a repository for tips on how to do things in the meadow. Our MOD, Steve, will probably pass this point on the main forum, so that several users can see and respond.

  Now, in regards to the AVI, which term is simply a wrapper, and it's what's inside that really matters. This ARTICLE will give you general information.

  It is likely that the CODEC of the BM is originally the derivative of synchronization. Dynamic correction of OOS is a little more difficult, that static OOS, but this ARTICLE will return you though the process.

  Good luck

  Hunt

• Look at the records

  I installed Premiere Elements and wanted to use the Organizer.  I wanted to clarify a watch folder, but whenever I click on file-> spyware files... I get an error: the file watch Service is not available.  I even went and reinstalled the software and that doesn't seem to help.  I use Adobe first Elements 8 on Windows 7 64 bit.  Anyone have any ideas on how to make it work?  I would use it rather than manually add videos.

  Thank you

  I see that you run PRE8 on W7-64 bit. I am running PRE7 under W7-64 bit and have no Active File Monitor service. Instead, I have the service "PhotoshopElementsFileAgent.exe * 32 (you will only see the service if you select the checkbox"Show processes from all users").»

  There is no option 'Spy files' in PRE7 and, seeing the service is called explicitly for the EP, I hope that this is normal.

  I wonder if the functionality of the Organizer in PSE8 trial expires after 30 days? You could install the PSE8 trial version to see if the record shows feature continues beyond the trial period

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Fill area of the screen with the first value in the record group

  Hi guys, what the title essentially says. I have a display element that is populated by the by selecting the appropriate option in a LOV. Is there a method that I can put in when a new instance of the form or something else to fill the screen with the first item in the record group used to fill the lov to ensure when the load form display area is not empty. I know I have to hard just in code, but I would have the value come from the record group.
  
  
  Thank you
  
  Published by: user13390506 on August 25, 2010 05:39

  This works very well for me:

  Created a record group (RG1) with the following order of selection:

  select table_name, table_name from user_tables order by 1
  

  Created a button on the Web that are running the following:

  PROCEDURE pop IS
     rg_id RecordGroup;
     gc_id GroupColumn;
     col_val VARCHAR2(1000);
     n number ;
  BEGIN
  
     rg_id := Find_Group( 'rg1' ); 
  
     IF Id_Null(rg_id) THEN
     Message('Record Group rg1 does not exist.');
     RAISE form_trigger_failure;
     END IF; 
  
     n := Populate_Group( rg_id) ;
     gc_id := Find_Column( 'RG1.TABLE_NAME' ); 
  
     IF Not Id_Null(gc_id) THEN
       col_val := GET_GROUP_CHAR_CELL( gc_id, 1 );
       message(col_val);
     End if ;
  
  End;
  

  I guess the record_name.column_name at the top of case...

  François

• the associative arrays containing the record type, cannot be used first

  I am having trouble with the declaration of an associative array containing the Types of records and iteration using FIRST and NEXT functions.
  This problem of mine is only appear when I use that types of records, the FIRST and FOLLOWING operators work very well when you use the regular NUMBER.
  
  Trying to get the first element of the array, I get: ORA-06550: line 22, column 40: PLS 00382: expression is of the wrong type
  
  See the code snippet below. Anyone know if this can be done in PL/SQL?
  
  -----------------------------------------------------------------------------------------
  DECLARE
  
  
  -Set the record structure that will contain information on a post
  TYPE PostRec IS (RECORD
  post_type VARCHAR2 (4) - maybe DEB/CRED
  );
  
  lr_charge_back_post PostRec;
  
  TYPE post_table IS TABLE OF PostRec NOT NULL
  INDEX BY VARCHAR2 (4);
  
  assoc_posts post_table;
  
  BEGIN
  
  
  -lr_charge_back_post.post_type: = "asd";
  assoc_posts('1').post_type: = '1';
  
  lr_charge_back_post: = assoc_posts.first;
  
  END;
  /

  Returns the index, not the file FIRST:

  SQL> declare
    2  TYPE PostRec IS RECORD (
    3  post_type VARCHAR2(4) -- Can be DEB/CRED
    4  );
    5
    6  lr_charge_back_post  varchar2(20);
    7  TYPE post_table IS TABLE OF PostRec NOT NULL
    8  INDEX BY VARCHAR2(4);
    9
   10
   11  assoc_posts post_table;
   12
   13  BEGIN
   14
   15
   16  --lr_charge_back_post.post_type := 'asd';
   17  assoc_posts('1').post_type := '1';
   18
   19  lr_charge_back_post := assoc_posts.first;
   20  dbms_output.put_line('idx='||lr_charge_back_post);
   21  END;
   22  /
  idx=1
  
  PL/SQL procedure successfully completed.
  
  SQL> declare
    2  TYPE PostRec IS RECORD (
    3  post_type VARCHAR2(4) -- Can be DEB/CRED
    4  );
    5
    6  lr_charge_back_post  varchar2(20);
    7  TYPE post_table IS TABLE OF PostRec NOT NULL
    8  INDEX BY VARCHAR2(4);
    9
   10
   11  assoc_posts post_table;
   12
   13  BEGIN
   14
   15
   16  --lr_charge_back_post.post_type := 'asd';
   17  assoc_posts('idx').post_type := '1';
   18  lr_charge_back_post := assoc_posts.first;
   19  dbms_output.put_line('idx='||lr_charge_back_post);
   20  END;
   21  /
  idx=idx
  
  PL/SQL procedure successfully completed.
  

  Max
  http://oracleitalia.WordPress.com