REPEATED failed to establish connection Message

Similar Questions

• SE "failed to establish connection w / Story server.

  In the last days (30 April - 1 May) I suddenly get a message when I try to import a document (.docx) in history.

  
  

  "Impossible to import the document. . Unable to establish a connection with the server of history. Service could be down. Please try again later. »

  
  

  I have restarted the app, and restarted my iMac, but still get the error message.

  
  

  Is it on my end, has anyone else received this message?
  

  
  

  
  

  Can you please it give one try on another? There was a problem at our end and we set.

• My attempt to connect to hotmail fails with the error message "this domain Services have been abandoned.

  Hello

  My attempt to connect to hotmail account fails with the error message "this domain Services have been abandoned. The problem persists in all web browsers. I'm unable to open a session (* address email is removed from the privacy *) which I've used for more than ten years, and I can't afford to lose. The problem started today and I don't know that I ever change any setting in my PC.

  Can someone help me with the first note.
  Thank you.
  Raj Kishore
  E-mail address is removed from the privacy *.
  E-mail address is removed from the privacy *.

  Hi Rajkis,

  When you use Windows Live Hotmail and the problem you posted is with Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Solution Center Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

  I hope this helps.

• Repeated failed installs Ko 977074, 978506, 978506. O/s of hanging in the journal began or pass the user's request.

  OK, here's my story:

  Windows 7 Home Premium, solid running, since 13/10/09
  History of failure of 974431 update that the next day, he managed without my taken part troubleshooting.  No complaints since more about 1 week ago got a BSoD outside no where while my child is on a restricted user account using IE.  Has not returned since, but suffice it to say.
  So now it's 26/01/10 and an update to install Windows Defender K915597 with success.  Cool deal.  It end tonight here and he says it is to install the updates and then stops.  Next day:
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  1/27 - office Live add-in 1.4 successful
  1/27 - KB976972 failed
  1/27 - driver update successful
  1/27 - KB977074 failed
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  See a pattern here?  So I should also mention that all of a sudden if I click log off or switch users while one of these updates says waiting and not pass/fail it hangs on Please wait... I waited about 10 minutes (normally it's about 10 seconds for the newspaper and immediate to change user) then have to restart the computer or force the feeding cycle.  So I decided to uncheck the Group of updates and just try one at a time through the automatic updates.

  Wait what he...

  1/28 - KB976972 successful

  1/28 - KB978506 successful

  1/28 - KB977074 successful

  1/28 - KB915597 successful (Windows Defender again)

  Hooray! life is good again!

  It end tonight here and he said please wait... Configuration of windows or something like this.  Odd.  Given that all of the updates succeeded and I had no updates available message.  Well it stops down.

  On the morning.  Please wait while windows configures (or other) updates failed returning changes.  What updates?  They managed you cursed!

  29/1 - KB976972 failed (what  Wait.  What?)

  1/29 - KB978506 failed (what  Wait.  What?)

  1/29 - KB977074 failed (what  Wait.  What
  ?)
  1/30 - KB976972 failed
  1/30 - KB978506 failed
  1/30 - KB977074 failed
  1/30 - KB978506 failed (me trying just the update to the compatibility mode)
  1/31 - KB977074 failed (my download and try to install the update manually)
  So there is some sort of timeline for what it's worth.  So basically three updates repeatedly failing and play with my head.   Here are the error codes for each of them:
  Update for Internet explore 8 Compatibility View List for Windows 7 (KB978506)

  Installation status: failed

  Error details: Code 80004004

  Update for Windows 7 (KB977074)

  Installation status: failed

  Error details: Code 80004004
  Update for Windows 7 (KB976972)

  Installation status: failed

  Error details: Code 80004004

  More potentially useful data.  I have manually install a (977074), said she is successful and I want to reboot, Yes, please wait windows configuration, stops, comes up, please wait configuration updates, no error, log, look at the history of the update, says "pending" 977074 next, I reboot on mine, please wait windows configuration, stop , rises, please wait for configuration updates, UPDATES COULD not return changes, allows me to connect... She does it every time.

  So I think I'll just deselect all and hide updates, screw it right?  I don't really have the situations these difficulty going home anyway.  So all deselected.  No found update, green check in Windows doesn't update.  Everything is cool.  Stop this night here, please wait windows configuration, stops, appears, wait for updated configuration to update, UPDATES FAIL back.

  And yet, he is suspended when the logoff or switch user thing.

  Seriously.  What is going on?

  Hello
   
  First, install the system tool using the link provided: http://support.microsoft.com/default.aspx/kb/947821
   
  Then, run boot.
   
  To help troubleshoot error messages and other issues, you can try to troubleshoot this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:

  Clean clean boot.

  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
   
  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.
   
  If you are still experiencing a problem, try the following:
   
  I suggest to download the update manually and install it. Use the link below to download the update.
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6711bec7-130F-4244-A13C-675bd9e42298&displaylang=en
   
  If this does not resolve the issue, I suggest you to reset windows update by following the steps listed in the article below:
   
  How to reset the Windows Update components?
   
  http://support.Microsoft.com/kb/971058
   
  You can also use the "Fix it" described in the article above solution.
   
  For more information on August 2009 Windows Vista and Windows Server 2008 Application Compatibility Update, follow this link:
   
  http://support.Microsoft.com/default.aspx/KB/972036

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Helps detect and block repeated RDP has no connections

  I wonder if anyone has found a way to detect (and then effectivly block) repeated failed RDP tries to connect.  I guess it's difficult because they are legitimate connection attempts that we don't normally block.  Run us several terminal servers and (correlated with new RDP according to virus recently announced) that we have seen of many attmepts login failed via RDP over the past months.

  I found a similar question that did not have a clear answer.  Anyone know how to set up a detection of flooding for repeated RDP connections?

  https://supportforums.Cisco.com/message/3365703#3365703

  I would like to find a way to block repeated attempts, but not to block all attempts, I need to keep the other source IPs unblocked the blocking mechanism.

  Erick

  You can try a signature of engine aotmic IP which is on port 3389. You can set the County event to the aggressor and the victim address pair and event the number to a decent amount (say 5) and a count interval to an appropriate interval event (say 30 seconds).

  You can also match on additional details (like a RST flag as well in the header of theTCP which ideally should follow a connection attempt has failed). If you do this, you specify the source TCP 3389 port and also activate swap victim-perpetrator addresses so that the destination IP address is detected as an aggressor.

  You can then set the action to "refuse the perpetrator victim pair inline" and all the traffic between these 2 guys will be blocked for a period of time (the default is 30 miniutes if I remember correct).

  Indeed, the signature will try to match 5 TCP packets in 30 seconds with a source port of 3389 and between the same set of IP addresses. If this condition is, it stops all traffic between these 2 hosts for a set period of time.

  Yet once, the numbers I mentioned above may not meet your requirement. You should maybe start wireshark and see the boss and match accordingly.

  I hope this helps!

  Kind regards

  Assia

• Jolt 1.2 Tuxedo 6.5 on Solaris 10 sparc is not establish connection

  Hello
  
  I installed Tuxedo 6.5 on Solaris10 sparc because my application was not compiled with a later version of Tuxedo. Then I installed Jolt1.2 there. I configured the tuxedo and all the application servers. While startup FINGS server starts but JSL fails with the JOLT_CAT:1008 error: could not establish connection to the server / / 10.10.100.110:9500. After that, it gives Tuxedo error 'tpsvrinit() failed '. As had been suggested in some other messages I already checked if shipping is free or not with the command "netstat - a | grep 9500» There is no coming out to the above command. But the same configuration works very well with Solaris 8 sparc. IP address of the machine is 10.10.100.110 and the hostname is "systest".
  
  The ULOG file extract is as below:
  092910: TUXEDO Version 6.5 SunOS 5.5.1 sun4u sparc SUNW, Ultra-1 credits.
  095316.SysTest! JSL.19863: LIBTUX_CAT:262: INFO: Standard master boot
  095316.SysTest! JSL.19863: INFO: JOLT listener version-Jolt 1.2 [08/31/1999-40]
  095317.SysTest! JSL.19863: JOLT_CAT:1563: INFO: serial number: < 1124052 >, Expiration Date: < none >
  095317.SysTest! JSL.19863: JOLT_CAT:1564: INFO: owner: Wipro >
  095317.SysTest! JSL.19863: JOLT_CAT:1008: ERROR: could not establish listening on the //10.10.100.110:9500 network address
  095317.SysTest! JSL.19863: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
  095317.SysTest! tmboot.19860: CMDTUX_CAT:825: ERROR: process JSL in the main failed with / t tperrno (TPESYSTEM - internal system erro
  (r)
  
  
  When I run several version of Tuxedo JSL starts without any problem. It establishes the connection easily. But my applications cannot be recompiled with a superior version of tuxedo that's why I am forced to use 6.5. I am confused, whether all the problem of different versions of jerk and Tuxedo or it's my configuration problem. Kindly help me.
  
  Kind regards
  Shashi Ranjan
  
  Published by: user5547545 on September 28, 2010 10:39
  
  Published by: user5547545 on September 28, 2010 22:12

  Shashi,

  Tuxedo 6.5 needs a patch to run on versions of Solaris or the WSNAT_CAT:1008 or JOLT_CAT:1008 "error: could not establish listening on the network + netaddr address +" message may appear.
  The thread could not establish listening on the network address describes a similar problem with the WSL and the ULOG in that thread also "TUXEDO Version 6.5 SunOS 5.5.1".

  You can get the fix last roll of Oracle support. (It would be even better to move to a later version of Tuxedo, Tuxedo 6.5 being beyond its end date of life on Solaris. I hope some compilation problems, you later with Tuxedo releases can be solved rather easily.)

  Kind regards

  Ed

• ViewPlanner fails when the "Connect-Start-workload.

  Hello

  I am working on installing a reference ViewPlanner, ViewPlanner 3.5 environment local.

  I created the Office of the GoldenRDSH and the Viewplanner device, without AD.

  I used Windows 7 32 bit under my desk and Office installed (2010..) and all the necessary applications and tools.

  Managed to do the check option, and there is no problems/errors.

  However, when I do the execution phase, it fails on the "Connect-Start-workload.

  Attached, the screenshots of the desktop and web appliance GUI.

  

  The journal of Viewplanner.txt of the device:

  15/06/17 09: 12:30, 160 INFO Matching VM control & Mgmt-Perf with prefix: GoldenRDSH

  2015-06-17 09:12:30, 160 INFO Matching VM GoldenRDSH with prefix: GoldenRDSH

  2015-06-17 09:12:30, 161 INFO VM GoldenRDSH matched with prefix: GoldenRDSH

  2015-06-17 09:12:30, 161 VMs Office INFO found: ["GoldenRDSH"]

  2015 06-17 09:12:30, INFO 161 loading AD Info to data structures is done with adinfo: [{'schedlist': zero, the 'Protocol': 0 L, "name": "ssss", "wrk_FK": "QuickWordTest_1i", "poolname": ", 'grp_id': 11 L,"extrainfo": zero, 'percentage': 100 L, 'connections_per_client': 1 L, 'deskvms': ['GoldenRDSH'], 'rdshtype': 0 L, 'workprofile': {'IEbpm': 1 L, 'ARbpm': 1 L, 'Thinktime': 5 L,"extrainfo": zero, 'name':"QuickWordTest_1i"}}] [{{, 'hosttime': 1, 'random': 1, 'iterations': 1 L, 'OMP': 60 L, 'video':-1 L, "applist": "WORD"}, "clientprefix": "}]

  2015-06-17 09:12:30, 164 DEBUG get the configuration option monitor_control.pseudo_perfctr in VM GoldenRDSH

  2015-06-17 09:12:30, 184 INFO the value of the performance counter for VM GoldenRDSH: true

  2015-06-17 09:12:30, 184 INFO updated 1 desktop VMs

  2015-06-17 09:12:30, INFO 184 turn on VMs in the Scott/ad group: ["GoldenRDSH"]

  2015-06-17 09:12:30, 185 DEBUG turn on/off the VM: GoldenRDSH

  2015-06-17 09:12:30, 188 DEBUG VM GoldenRDSH is powered. Restart the virtual machine.

  2015-06-17 09:12:31, 250 INFO Operation: poweron_desktops, start time: Wednesday 17 June at 09:12:30 2015, Total time taken: 4.31

  2015-06-17 09:12:31, 251 INFO-

  2015 06-17 09:12:31, INFO 251 waiting for the number of virtual machines for you register

  2015-06-17 09:12:31, 251 INFO-

  2015-06-17 09:12:34, 860 DEBUG returning to the current state: 0 with status message: [IP recorded: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors)]

  2015-06-17 09:12:50, 327 new customer INFO entry: 10.11.19.165

  2015-06-17 09:12:50, 328 registered current INFO status machines: [required servers: 1] [server: 0]

  2015 06-17 09:15:50, 328 INFO analysis all virtual machines for all required patches.

  2015-06-17 09:15:50, 328 INFO receives the IP address for the computer virtual GoldenRDSH vCenter

  2015-06-17 09:15:50, 340 INFO Got, the IP address for the virtual GoldenRDSH computer: 10.11.19.165

  2015-06-17 09:15:50, 341 INFO makes the analysis of the virtual machines.

  2015 06-17 09:18:50, 342 INFO analysis all virtual machines for all required patches.

  2015-06-17 09:18:50, 342 INFO makes the analysis of the virtual machines.

  2015 06-17 09:21:50, 426 DEBUG, there could be problems with the following virtual machines in this run (check vCenter Console to search for errors). Continue the race with other virtual machines.

  2015-06-17 09:21:50, 427 INFO receives the IP address for the computer virtual GoldenRDSH vCenter

  2015-06-17 09:21:50, 443 INFO Got, the IP address for the virtual GoldenRDSH computer: 10.11.19.165

  2015-06-17 09:21:50, 443 DEBUG IP: 10.11.19.165-> name: GoldenRDSH

  2015-06-17 09:21:50, 444 INFO Running query: SELECT * from hostinfo where IPADDR = "10.11.19.165."

  2015-06-17 09:21:50, 445 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State is 'Unpaired', name = 'GoldenRDSH' where IPADDR = "10.11.19.165."

  2015-06-17 09:21:50, 452 INFO registration remaining VMs.

  2015-06-17 09:21:50, 452 INFO reached threshold number of machines. From the reference plane.

  2015-06-17 09:21:50, 452 INFO waiting for virtual machines to settle; sleep for the rise time.

  2015-06-17 09:22:20, 490 INFO Running query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('1', '10.11.19.165', '10.11.19.165', 'NA', 'ssss_1', "passw0rd", "waiting", "2015-06-17 09:22:20", 0)

  2015-06-17 09:22:20, 495 INFO Running query: SELECT * from testinfo where testname = '1' and test_state = 'pending' and ClientIP_FK = '10.11.19.165' and ServerIP_FK = username and "10.11.19.165" = "ssss_1."

  2015-06-17 09:22:20, 505 DEBUG begins to gather its periodic vCenter stats...

  2015-06-17 09:22:26, 220 INFO-

  2015-06-17 09:22:26, 221 INFO launch the execution plan for the run profile

  2015-06-17 09:22:26, 222 INFO-

  2015-06-17 09:22:26, 222 INFO from the local workload for virtual desktops.

  2015-06-17 09:22:26, 223 INFO Unmapping default data on the 10.11.19.165 virtual machine folders

  2015-06-17 09:22:26, 223 INFO Running query: SELECT * from testinfo where ServerIP_FK = '10.11.19.165' and test_state = 'waiting '.

  2015 06-17 09:22:26, 225 INFO the id of the test server is 4

  2015-06-17 09:22:26, 225 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.11.19.165."

  2015-06-17 09:22:26, 235 INFO Running query: UPDATE testinfo test_name = "1" SET, Protocol is "NA" of user name = "ssss_1" password = "passw0rd", test_state = "Running", start_time = '2015-06-17 09:22:20 "where test_id = 4

  2015-06-17 09:22:26, 236 INFO Pushing workload from the virtual machine configuration: 10.11.19.165

  2015-06-17 09:22:26, 237 INFO running commands remotely with arguments: server: 10.11.19.165, test_name: 1

  2015-06-17 09:22:26, 237 callback function to add INFORMATION for the remote root object for IP address: 10.11.19.165

  2015-06-17 09:22:27, 085 adding INFO reminder for the command startWorkload on the 10.11.19.165 Server

  2015-06-17 09:22:27, 115 WARNING remote call failed: [failure instance: traceback to remote host - Traceback unavailable]

  ]

  Error unhandled offline:

  Unhandled error

  The remote host - unavailable Traceback traceback

  2015-06-17 09:22:30, 119 configuration workload of INFORMATION sent to group: ssss

  You will appreciate your help.

  Thank you

  Guy

  It seems that the ViewPlanner agent is installed incorrectly.

  There are two packs zip for Agent of VP (1) for desktop PC (2) to the client.

  It seems that this client package is installed in the office instead of an office. You can install the agent desktop of VP and try again?

• I can't reach the order on Amazon. I get a connection message has been reset

  I can't reach the order on Amazon. Can I not move freely to my account. I tried to sign up with other names and addresses of e-mail, but also without success. I disabled anti virus (Avast) and the Windows Firewall, clean cookies etc. I spent some time with Amazon and my server (PlusNet) tries to solve this problem. It also occurs with Internet Explorer and Safari.

  The problem lies within my own computer, but does not appear to affect any site other than the Amazon. Reset the connection message is common, what is normal or not I don't know, but when retrial normally goes away when you surf elsewhere

  I can access it on Amazon using computers from a neighbor.

  Have you tried to read this article

  https://support.Mozilla.org/en-us/KB/error%20loading%20Web%20sites#Interrupted_or_reset_connection

• FTP error could not establish connection

  Hello

  I am trying to connect to the ftp server to get a file of.

  I used the 'FTP get file.vi.

  here a screenshot showing the front and the block diagram:

  

  on the left, there are filezilla showing that the ftp server is very well connected and the remote path showing the files that I want to get one of them "log.txt".

  I filled out the same info in my labview vi... and when I type throws this error pops up

  {

  Error 0 occurred at the FTPOpen data connection: could not establish connection

  Possible reasons:

  LabVIEW: Error connecting to the GPIB driver or device.
  =========================
  VISA: (Hex 0x0) operation completed successfully.

  }

  I don't know what wrong I do... any ideas?

  Thank you!

  Thanks for your reply... I solved the problem ago... tour of false active to passive using the data connection in an active terminal...

  another error pops up that I have to put the same file type as the file that I ask for... I did the g:\file.txt local path and it workd very well...

  Thank you

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB2686509 repeatedly fails with ErrorCode 0x8007F0F4

  KB2686509 repeatedly fails with ErrorCode 0x8007F0F4

  It is obsolete

  I wrote a VB Script to solve two problems when running microsoft KB2686509 security update

  HKLM\SYSTEM\CurrentControlSet\Control\Keyboard Layout
  and
  HKLM\SYSTEM\CurrentControlSet\Control\Keyboard layouts

  for those who are not freaks of registry.

  Here you can download my little fix in the ZIP file.

  What is doing? No magic!

  1 made a backup of the registry

  2 remove the entries with the keyboard

  3 checks each keyentry in Keyboard Layouts against file in %SystemRoot%\System32

  Hope I have someone help with this script.

  Concerning

  Germany Christian

  Updated 2012/06/03

  I wrote a batch file too. If you use this place the vbs solution.

  It is a little more difficult, because the batch file exports the two keys, the destroyed, creates the empty entries. Then, you must rerun the KB2686509! After this do not restart, press on continue in the command window (restoration of the old entries) and then restart.

  If one of the buttons (bad) does not exist, the command file creates an empty entry, so KB2686509 should work.

  Here you can download the http://www.vivus.net/dl/ batch file

• KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  Run the automatic fix here and try again once the update manually by downloading it from HERE

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• I repeated the small size of message in the folder C

  I repeated the small size of message in the folder C

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you follow the steps below:

  Run the disk cleanup on the computer. You can check the link for the procedure: Description of the tool in Windows XP Disk Cleanup: http://support.microsoft.com/kb/310312

  Also check out the link and try the steps listed in the link: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx#2

• Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

  Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

  them, but the update continues to fail.  Any help would be appreciated.

  Hello

  Perform the steps from the link below and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Hope this information helps.