SE "failed to establish connection w / Story server.

Similar Questions

• Could not establish connection to the server

  We have a user on a 64-bit Windows 7 device that is running the version of vWorkspace 7.6.0.791.  All the others have been the connection found in the environment with Web access, but this one users gets the generic error "Could not connect to Server" nothing no appears in the event viewer on the client device or server and did not know if anyone has seen this before.  Thank you

  Is this PC has the RDP 8 installed update (KB2592687)? If so, you will need to make sure you have the patch applied 8 RDP. See this link for more information:

  https://support.quest.com/SolutionDetail.aspx?ID=SOL101291

• Cannot send emails. Message says "sending message failed because the connection to the server outgoing (SMTP) has expired. Is the fault with Thunderbird or BT?

  Cannot send emails. Message says "unable to send message because the connection to the outgoing (SMTP) server has expired." By default the SMTP seems correct. Any ideas how to solve this problem?

  Oh, we still think. Using anti-virus software? It scans your outgoing messages? Try to turn off the power; It can slow down transmission in order to trigger a timeout on the server.

• REPEATED failed to establish connection Message

  I am the first owner at the time of a Palm Treo 700 p.  I have a laptop with Windows Vista (32 bit).  I use a USB connection and successfully Hot Sync - achieved (initially I was getting an error message indicating a database file could not be opened on the Palm, but I did a soft reset and this problem has since been resolved and it is now able to synchronize without errors).

  The problem I encounter is that on my Palm, I get an error message that every few minutes a Cound connection not established - it seems eager to connect with my wireless laptop.  I checked hot Synchronization Manager on my laptop and under connections, USB only is checked.  On the Palm, local and home/cable station are selected.  Is there a setting that I have to turn off so that the Palm is not continuously for the laptop computer, or is it just hung in a "loop"?

  Thank you in advance for help a beginner!

  My mistake I have applogys for not reading your whole post.

  Now for your problem sounds like the wireless sync is installed on this device. you have one of two choices. hard reset the device and rename your folder (installation program for the programs that you have installed) backup or turn on wireless synchronization.

  first of all to make sure that his wireless sync. in your applactions, look for wireless synchronization. Once there, if you see no download or install in the background. It is not your problem. If you do so. message on what you want to handle this. with the hard reset and rename the backup folder. you need to install one of the programs at the same time you know of your backup folder, if you do not install wireless synchronization.

  Message relates to: Palm Z22

• Store Windows 8 will not be open. Could not establish connection due to server problem or connection has expired

  I had upgraded to windows 8.1 two weeks ago and had problems I did a system restore. Went through the update and now the store windows will not open so I can upgrade to 8.1 windows again. Any help would be appreciated.

  Hi Pinaki,

  Hooray!

  I couldn't understand how to disable McAfee so I uninstalled and installed AVG, now I install 8.1.

  Hope everything goes well.

  Thank you once again.

  Frank

• Jolt 1.2 Tuxedo 6.5 on Solaris 10 sparc is not establish connection

  Hello
  
  I installed Tuxedo 6.5 on Solaris10 sparc because my application was not compiled with a later version of Tuxedo. Then I installed Jolt1.2 there. I configured the tuxedo and all the application servers. While startup FINGS server starts but JSL fails with the JOLT_CAT:1008 error: could not establish connection to the server / / 10.10.100.110:9500. After that, it gives Tuxedo error 'tpsvrinit() failed '. As had been suggested in some other messages I already checked if shipping is free or not with the command "netstat - a | grep 9500» There is no coming out to the above command. But the same configuration works very well with Solaris 8 sparc. IP address of the machine is 10.10.100.110 and the hostname is "systest".
  
  The ULOG file extract is as below:
  092910: TUXEDO Version 6.5 SunOS 5.5.1 sun4u sparc SUNW, Ultra-1 credits.
  095316.SysTest! JSL.19863: LIBTUX_CAT:262: INFO: Standard master boot
  095316.SysTest! JSL.19863: INFO: JOLT listener version-Jolt 1.2 [08/31/1999-40]
  095317.SysTest! JSL.19863: JOLT_CAT:1563: INFO: serial number: < 1124052 >, Expiration Date: < none >
  095317.SysTest! JSL.19863: JOLT_CAT:1564: INFO: owner: Wipro >
  095317.SysTest! JSL.19863: JOLT_CAT:1008: ERROR: could not establish listening on the //10.10.100.110:9500 network address
  095317.SysTest! JSL.19863: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
  095317.SysTest! tmboot.19860: CMDTUX_CAT:825: ERROR: process JSL in the main failed with / t tperrno (TPESYSTEM - internal system erro
  (r)
  
  
  When I run several version of Tuxedo JSL starts without any problem. It establishes the connection easily. But my applications cannot be recompiled with a superior version of tuxedo that's why I am forced to use 6.5. I am confused, whether all the problem of different versions of jerk and Tuxedo or it's my configuration problem. Kindly help me.
  
  Kind regards
  Shashi Ranjan
  
  Published by: user5547545 on September 28, 2010 10:39
  
  Published by: user5547545 on September 28, 2010 22:12

  Shashi,

  Tuxedo 6.5 needs a patch to run on versions of Solaris or the WSNAT_CAT:1008 or JOLT_CAT:1008 "error: could not establish listening on the network + netaddr address +" message may appear.
  The thread could not establish listening on the network address describes a similar problem with the WSL and the ULOG in that thread also "TUXEDO Version 6.5 SunOS 5.5.1".

  You can get the fix last roll of Oracle support. (It would be even better to move to a later version of Tuxedo, Tuxedo 6.5 being beyond its end date of life on Solaris. I hope some compilation problems, you later with Tuxedo releases can be solved rather easily.)

  Kind regards

  Ed

• Message "connection to the server was reset.

  Hello.

  I use iMac OSX 10.11.2 El Capitan. I am unable to connect to internet addresses. On Firefox, I get a message "the secure connection failed. The connection to the server was reset while the page was loading.' and ' the page you are trying to view cannot be shown becdause authenticity of the received data could not be verified. "

  Someone has any advice how to deal with this problem?

  Thanks for any help.

  https://support.Mozilla.org/en-us/products/Firefox/fix-problems

• Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• WARNING: Unable to update the preferences of the user has failed to establish a connection with the server of history. Service could be down. Please try again later.

  Error when you try to import

  WARNING: Unable to update the preferences of the user

  Cannot establish a connection with the server of history. Service could be down. Please try again later.

  Can you please try again? Please let us know if you still experience this issue.

• Cannot get mail that failed to connect to my server

  Cannot get mail

  Failed to connect to my server

  Hello parkspa,

  Thank you for using communities Support from Apple. I know have a problem with Mail on your iPhone, it's not what you expect. The good news is the next article will be useful for troubleshooting and solving your problem and get email working again on your iPhone:

  Get help with Mail on iPhone, iPad and iPod touch

  See you soon!

• failed to connect to the server.

  When I try to access mail, I get this message: connection to the server has failed. I recently changed my site Web hosting from a company of marketing at Godaddy. This problem occurred after that all Web site files have been downloaded to Godaddy. I have not communicated with them again, just to begin to try to solve the problem.
  I'm not good with this sort of thing, even if I can follow directions.
  Thanks for any help!

  GoDaddy are almost certain to use different server to your previous host settings.

  POP settings (account type whatever you use) or imap from Godaddy and update your account settings.

• Firefox sync fails to connect to the server.

  Firefox sync has not worked on my laptop for the last days. It fails with the error
  "Unable to connect to the server. Synchronize automatically retrying this action. »
  Sync works fine on my Android device on the same network. I tried to disconnect and reconnect my sync account and also tried to synchronize in safe mode without success. The error in the synchronization log report: https://pastebin.mozilla.org/8834320.
  About: config the services.sync.clusterURL is not set. services.sync.tokenServerURI has the value default 'https://token.services.mozilla.com/1.0/sync/1.5'.

  Understand the problem. I had activated FIPS compliance on my software security device. Apparently, WeaveCrypto used by sync is not FIPS compatible. I disabled FIPS now and sync works fine. Bug report: https://bugzilla.mozilla.org/show_bug.cgi?id=443386

• Failed to connect to the server. Why?

  I can receive emails. When I try to email a message says connection to the server has failed. Check the settings of the server.
  How do I do that?

  Go to your email provider's website and find out what the settings are supposed to be.

  Go to Tools | Account settings. Scroll down to the last entry in the list of Auditors, "outgoing (SMTP) server. Select this option, select your email provider's SMTP server and check the settings. If there is a disparity, click on edit and modify as needed.

• Firefox and safari... can not establish a connection with the server of http sites

  Hi I have a mcbook pro loaded with OSX X Yosemite 10.10.3. For some time on safari and firefox I can access https sites only and get an error message "Unable to connect", then then specifically line "Firefox can't establish a connection to the server www.seek.co.nz.

  On the same network, I have an iMac OSX X Yosemite 10.10.5 running and can access http sites that my laptop will not. I compared the network settings and they are identical, I disabled the extension and erased the caches, but always without success. Any siggestions?

  Hello. Take a look at this article, maybe this will help you. OS X Yosemite: If you can't connect to the Internet

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.