repeated KB2464594 and KB2446704 automatic update installations

Similar Questions

• "windows cannot check for updates ' and my automatic update is on

  * Title *.
  My computer says "windows cannot check for updates ' and my automatic update is on. Can someone help me with this problem?

  Gavextraordinare,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Perform operations ofKB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keep automatic updates installation and restart request, cycling.

  After a clean install of Windows XP Edition family, I was unable to install the automatic updates.  Installed service pack 3 manually as suggested in this forum.  But now he repeats to me there are updates to install, it downloads and installs, then said done and it needs to restart.  But when it gets to the top of the Update icon is still there and you have to do it again

  .

  Hello

  1) that updates are you referring?

  (2) are these same updates that are repeat?

  Method 1: You can manually download by going to the Microsoft site and enter the KB with the number that is installed on several occasions.

  Microsoft Download Center

  http://www.Microsoft.com/en-us/download/default.aspx

  Method 2: Windows Update or Microsoft Update offers several times the same update

  http://support.Microsoft.com/kb/910339

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know the results to help you better.

• Both my vista system entered a repeated after the last automatic update reboot

  I had just done file clean with Norton Utilities on both systems, during the restart of automatic updates has downloaded the latest vista updates.

  Step 2 first load okay but when the phase 3 is to load I get the same message: configuration of updates of stge 3 of 3 0% complete do not turn off your computer and keeps it just reboot again and again.

  One system, I could get back on line running a repair utility and go back to a restore point. No luck on the other still.

  Tried all the advice, it's the only thing that finally worked.

  http://nctritech.com/vista_update_loop.php

  Here is the short version for people who know how to get to tools to do this and if run restore system from the installation DVD does not work: DELETE the files \Windows\WinSxS\cleanup.xml AND (if applicable) will be fixed \Windows\WinSxS\pending.xml and the infinite loop updated.

  There are two ways to get the files, you need to delete. The easiest is to start your installation of Windows and the button 'Install now' DVD, click on the link located at the bottom left that says 'Repair your computer' open a command prompt and type:

  del C:\Windows\WinSxS\cleanup.xml

  del C:\Windows\WinSxS\pending.xml

• Automatic update installs

  My computer downloaded PowerPoint 2007 KB2596843 (automatic update) but it does not install and I get waiting for the installation message.

  Same problem with a xp media center edition 2005 Update Rollup 2 x 86 Edition KB2619340

  Any help will be appreciated.

  Hi Ruben,.

   
  1. who is the operating system installed on the computer?
  2. you receive an error message related to the update of Windows?
   
  I suggest you to follow the steps and check if it helps.
   
   
  If you use Windows XP as the operating system, follow the steps and check if that helps.
  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
   
  Note: This link is applicable to Windows XP and does not apply to Windows Vista.
  
  If you use Windows Vista as the operating system, follow the steps and check if that helps.
  Problems with installing updates
  
  I hope this helps.

• Errors during update of vista and use automatic updates. (Codes 0x8000fff and A 8024, 000)

  I have a laptop HP HDX16. Recently, the hard drive has not then I replaced and the restore CD to return to factory settings. It's windows vista edition Home premium 64-bit with service pack one.

  I use a usb huawei modem to connect to the internet, however, the drivers would not install properly.

  I used another computer to download a version of service pack 2. However, 3/4 of the way through the installation I have error E_unexpected 0c8000ffff handler. I installed fixit 50202 I had seen on the forum, but this has not fixed the problem.

  I then tried to run the installation program stand-alone windows update (KB947821-v4) However, this resulted in the 0xc8000247 error code.

  I then tried to install the mobile fix it program to see is there something that could contribute. However there is no whenever he tried to install powershell.

  I was able to use the usb modem by starting in safe mode and allowing unsigned drivers. From here, I tried to run the automatic update, but which gave the error code A 8024, 000. The usb modem wouldn't always work outside of safe mode.

  I also tried a complete reinstall with the recovery discs, but I still get the same errors.

  Norton antivirus is pre-installed. This was also replaced, but the same errors occurred. However, I was able to successfully install other software not microsoft.

  For any help or suggestion would be greatly appreciated.

  Thank you for your response.

  However, I found this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/cant-update-anything-error-codes-8024a000/24591fff-a8d3-4151-b889-87402e30755d

  and install the proposed pilot it (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02219204&cc=nl&lc=en&dlc=en&product). I was then able to install SP2, my usb modem worked and I was able to run the windows update, so I think that the problem has been corrected.

  Thanks again

• Windows update 7.6.7600.256 agent repeatedly fails, turns off automatically updates then crashes on a loop, between insatll and updates

  the Windows update for vista 7.6.7600.256 agent attempted to repeatedly update fails.  I used the fix it app and how many resources can find your site, on the chance.

  Frustrated, please help.  I go to the update and it says to install the new agent to update so, I can receive the updates, close the window then after 30-40 minutes updates automated message disabled, so turn it back on and still does not work.  Several times after I click on install new update agent he schecks for new updates and I have a backward loop to the installation.

  Help, please!

  Thank you

  Hi Larrygrybos,

  ·         You receive an error code or error message for the update failed?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to manually download the Windows update client according to the edition of the operating system 32 or 64-bit:

  32-BIT downloads: http://go.microsoft.com/fwlink/?LinkId=178959

  64-BIT downloads: http://go.Microsoft.com/fwlink/?LinkId=178960  

  You can also see the following article for more information:

  Windows Update Error 80004002

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-Error-80004002

   

  Method 2: I suggest that you put the computer in a clean boot state and try to install the update.

  You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Method 3: If the method above doesn't help then try steps listed in the following article and verify.

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know if that helps.

• 2nd display after automatic updates installation of HP lost

  I have a HP Envy Touchsmart Sleekbook 4 running Windows 8.1 (64-bit).  Everything worked fine the software auto-HP told me to install updates 8.  I did it and after her, my 2nd screen not working anymore (today is 28/06/14).

  The charm of "Devices" / project tells me "your PC can not project to another screen.  Try reinstalling the driver or a different video card. »

  According to the HP '?' software, my current driver is an Intel HD Graphics 4000, version 10.18.10.3412 (22/01/14).

  Where can I get the driver for this PC and how do I install it?

  Thank you

  Hi Yago-NJ

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that after the installation of updates you are more able to project on a second screen.

  HP produce many models of n HP Envy Touchsmart Sleekbook 4.  You can get the drivers for your device out of the page HP drivers & downloads for your model. You will need to enter the exact model and follow the prompts. How can I find my model number or product number?

  When you have the page and you have selected the driver, click more details.  Installation instructions will appear.

  You could do a restore before it happened. Using Microsoft System Restore (Windows 8)

  You can also try a Refresh Your PC to solve problems (Windows 8)

  Did you try to uninstall and reinstall the driver in Device Manager?

  You can try to install the original driver in the Recovery Manager.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  You upgrade Windows 8 to 8.1?

  I hope this helped, if not what would you back with your contact information and the results of your attempts to correct the problem.

• Windows 7 automatic update installation KB973688 fails

  When KB973688 tries to install fails and returns code 643. Windows 7 update has worked well up until now. It seems as if the failure is associated with this particular update.

  Any help would be appreciated.

  Hi R.Spitz,

  Welcome to Microsoft Windows 7 answers Forum!

  1. for the error message, please see the article below, as this seems to be a known issue.
  MS08-069: Description of the update of security for XML Core Services 4.0: November 11, 2008
  http://support.Microsoft.com/kb/954430
   
  2. to work around this problem, manually install the update of security from the Microsoft Download Center, and then click ignore when the error message appears.
  Download the stand-alone package of this patch from the link below and install it.
  http://support.Microsoft.com/kb/973688
   
  3. to confirm that the installation was successful, verify that the version of the Msxml4.dll file in the %SystemRoot%\System32 folder is 4.20.9870.0.
  See if that helps.
  If this does not help, you can try to reset the Windows Update components and reinstall again.

  Click on the difficulty he provided in the link below to do so.
  How to reset the Windows Update components?
  http://support.Microsoft.com/default.aspx/KB/971058

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

• XP security updates fail automatic update installation

  Update for Windows XP (KB973869) security
  Update security for Windows XP (KB956844)
  Update security for Windows XP (KB956744)
  Update for Windows XP (KB946648) security
  All with the error Code: 0x8007F0ED

  Hi Rboater581,

  Welcome to Windows Vista answers Forums!

  You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  These steps should solve the problem, give it a try and check if you are able to perform windows updates.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have a box of HP update; too small and click the update installation, cannot enlarge the box button install access, can not enlarge the box.

  How can I get rid of or access to a box to update from HP that I am unable to read entirely and also unable to extend the size of box click the button install. Cannot drag the box in the trash. Anyone know how to remove the box?

  To close the box, click on the red button X in the upper right corner of it.

  Size of the box is in it was due to a glitch. It happens from time to time and will probably not repeat.

  Rifdhan

• Why the Automatic Updates installs

  I have 8 updates waiting to be installed include 4 for Vista and 1 for Internet Explorer.  Apparently install it, restart the computer but Setup fails, then the updates are back.  Why?

  Hi Joodpn,

  Have you tried following the steps described in this article? If this article does not help there is a thread that deals with this issue with other updates that may help as well.

• a kind of automatic update suddenly without warning started to close all the documents I was working on, rebooted and lost all the changes I had made in the past three hours

  I've worked hard for three hours in the middle of the night, made extremely dfficult work on several Word documents and Excel spreadsheets. at the same time - the kind of work that you can do if you're sure not not to be interrupted. All of a sudden a few (probably Windows) update began to close the files one by one, "don't turn off your computer" was the message.
  I waited. It restarts, but then I realized all of work my three hours had disappeared. The files are still there, but in their unchanged form. How is it you lose nothing if your battery runs out and you can restore the files, that you deliberately deleted, and there is a permanent record of each tiny websearch? However, Windows can come in the night and boldly to destroy three hours of irreplaceable forced labor without warning! I won't ever be able to replace it.

  Set the automatic update process so that you can control if the updates to download and install.

  And, as a general rule, always save files regularly while you work.

  HOW to: Configure and use automatic updates in Windows XP
  http://support.Microsoft.com/kb/306525

  How to configure automatic updates by using Group Policy or of registry settings
  http://support.Microsoft.com/kb/328010

  for Vista: http://windows.microsoft.com/en-us/windows-vista/Change-how-Windows-installs-or-notifies-you-about-updates

  for Windows 7: http://windows.microsoft.com/en-AU/windows7/Change-how-Windows-installs-or-notifies-you-about-updates

  Take control, adjust your settings in THE and save your work as you go along.

  TaurArian [MVP] 2005-2010 - Update Services

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• Automatic updates program turned out impossible to turn it on, with error message "site has encountered a problem and cannot display the page you are trying to view.

  Original title: Auto updates

  My automatic updates program is disabled.  When I try to turn it on, I get this message "the site has encountered a problem and cannot display the page you are trying to view.  Automatic updates forever, why was off and why he now won't come back?

  Bill T

  E-mail address is removed from the privacy *.

  Hi Bill,

  This problem can be caused if the automatic updates service may be missing in the Services snap-in.

  1. is the Service Pack 3 installed on your computer?

  2. what anti-virus software you use in your computer?

  Follow the steps below:

  Method 1:

  To resolve this issue, follow these steps:

  1. Click Start, click run, type explore, and then click OK.
  2. Look for the following folder:

  %windir%\System32\inf

  Note The %windir%\System32 placeholder represents the path of the WINDOWS System folder. Typically, C:\WINDOWS is the path of the WINDOWS System folder.

  The inf folder is a hidden folder. To view the inf folder, follow these steps:

  a. on the Tools menu, click on Folder Optionsand then click the view tab.

  b. in the list of Advanced settings , click to display the hidden files and folders under hidden files and folders.

  c. click applyand then click OK.

  3. double-click on the inf folder, right-click in theand then click install.

  4. click on Browse. Look for, and then click the \ServicePackFiles\i386 %windir%\System32folder if the following conditions are met:

  • You install Windows XP SP3 from a CD Windows XP SP3 which included as part of the basic installation of SP3.
  • You have downloaded and installed Windows XP SP3 from the Microsoft Web site.
  • Windows XP SP3 was included with the computer.

  Note If the files from the Service Pack folder is not present on the computer, you can copy the files from a Windows XP SP3 slipstreamed installation CD.

  5. click OK to copy the files.

  6. change the setting on the computer to not display the hidden files and folders. To do this, follow these steps:

  1. On the Tools menu, click Folder Options, and then click the view tab.
  2. In the list of Advanced settings , click show not the hidden files and folders under hidden files and folders.
  3. Click applyand then click OK.

  7 restart the computer and check.

  Method 2:

  Follow the steps in the link below.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update:

  http://support.Microsoft.com/kb/883614

  For reference:

  How to configure and use automatic updates in Windows:

  http://support.Microsoft.com/kb/306525

   

  If you need further assistance on this topic, let know us and we will be happy to help you.