repeating the DCs error in the console

Similar Questions

• kernel: disk0s2: error IO repeatedly appearing in the activity of the Console. He says this hard drive is faulty?

  I've recently updated for the SSD, and it was a bit of a bumpy road so far.

  I get these messages in the console app a lot

  kernel: disk0s2: i/o error.

  My new hard drive isn't a lemon or is it a software problem?

  It does not necessarily mean that the SSD is a failure. It could also be a problem with the SATA cable. Check if it is probably connected and/or replace it.

• I get windows cannot verify the updates and error 80070424 and tried repeatedly the solutions suggest you and get always the same cannot verify the icon

  error 80070424 message and we tried all of the solutions you propose to the admin. tools and without success

  I suspect you got error 0 x 80070005 only because you don't raise invites http://www.vistax64.com/tutorials/181765-elevated-command-prompt.html
  Even if you are on the standard Vista admin account ever run the console administrator rights. To run the console with admin rights, it requires extra tip (details you have in above links)

  My suggestion: just run 'MS Fix it' KB971058 in aggressive mode - it can re-register all WU, modules of BITS and more... If you are lucky it is only conventional option it should solve your problem. If this does not resolve, go to Start > Search > services.msc
  and check below services exist, have correct parameters and work

  BITS : automatic (extended), began

  Windows Update : automatic (extended), began

  Windows Modules Installer : manual

  If you have an other parameters you have to fix it. If you can't change the setting or any service do not exist, you must fix a service (read below)
  http://www.Vistax64.com/tutorials/258701-Windows-Update-error-80070424-a.html

• 503 error when you access the console of the APEX for the CDB

  I can access the console of the Apex for the preliminary draft BUDGET, as per the documentation. But not the CBD.

  • For the CBD in a database of the 12 Release 1 database Oracle:https://node-ip-address/apex/
  • For a file in a PDB database of the 12 Release 1 Oracle database:https://node-ip-address/apex/lowercase-pdb-name/

  I get a 503 error.

  I tried with and without SSH tunnel. Neither work. Any advise?

  You can create a PDB files using the PDB self-service app, EM Express, SQL or SQL Developer directly. No net APEX strictly for that.

• Error deleting project or a resource of Xquery in the Console of the OSB

  Hello

  I am trying to remove a console of the OSB project, but it generates this error: "error: end of file unexpected after null. Is there a way I can go on file system and manually delete the project? Is not let me re - deploy the project to the server of the OSB. Please notify.

  Thank you

  Jahangir

  Is there another way to remove the server from the OSB project? Any help would be greatly appreciated in this regard.

  Under the root of the domain, there is the OSB / directory that contains all projects of the BSO and other whatnot. I had to clean this one (renamed to osb.old) because it has been corrupted and OSB just didn't let do me anything through the console. It went well, the server became clean and I transferred the same tree of project from scratch.

  I shouldn't remind you however that you save better the whole area before you do.

  Vlad

  http://genericparallel.com

• The Adobe application manager maintains unexpectedly close immediately after that b being open when I try to download After Effects and repeat the process when the error message appears asking me to reopen.  Why isn't she let me download After Effects?

  The Adobe application manager maintains unexpectedly close immediately after b being open when I download tryto After Effects and repeating the process when the error message appears asking me to reopen.  Why isn't she let me download After Effects?

  Drogers1102 please use the uninstaller of creative application Cloud Desktop, then reinstall.  You can find more details at the request of error "Failed to install" Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html.

• Dell Openmanage 6.1 reports SCSI errors in the console, what do mean?

  We have installed 2 new Dell servers with VMWare ESX 4 and also installed Dell Openmanage 6.1. So far so good, dell openmanage seems to work very well, we get not errors in starting services. But we get strange message (see screenshot) every two seconds the kernel in the console, including reffer a sort of sici device. Does anyone know what this message is about and how get rid of?

  Thank you.

  

  Looks like you are having the same problem I had with of my new race ESX 4 and Openmanage 6.1 R710. I found myself by opening a ticket with Dell and they came back and said that there was a problem with the inventory collector. Specifically, I think it has something to do with the FCAC as I recall the conversation.

  They do the following and it solved the problem. Oh and put the host in just in case maintenance mode.

  CD/opt/dell/srvadmin/cm/invcol

  MV invcol invcol.bak

  srvadmin - services.sh reboot

  At the time, Dell had a tentative date of update OpenManage to solve the problem.

  Ray

• CreateChild simple script returns an undefined error but runs in the console?

  Hello

  Well, I'm really a newbie... I have read many threads made a lot of research and no matter what I cannot do the following to run correctly in the js file. Even if the code is running in the console...

  / * Bookmark * /.

  var myRoot = this.bookmarkRoot;

  function createBookMark()

  {

  myRoot.createChild ("test", 0);

  }

  app.addToolButton({)

  cName: 'Add bookmark Test', the name of //Button

  cExec: "createBookMark()", call //Function

  cLabel: "Bookmark test", //The text on the button

  cTooltext: "Create bookmark test" //Help text

  });

  Error:

  myRoot is undefined

  25:app:exec

  TypeError: myRoot is not defined

  25:app:exec

  In the console:

  var myRoot = this.bookmarkRoot;

  myRoot.createChild ("test", 0);

  code runs without error.

  What I am doing wrong?

  You must pass myRoot as a parameter to the function. If the function

  header must be:

  function createBookMark (myRoot) {}

  And the call to the function should pass this variable, as follows:

  cExec: "createBookMark (this.bookmarkRoot).

  You need to remove the first line of code (the myRoot statement

  outside of the function). There is no point in the code.

• Error in the Console of the OSB SOAP request

  Hello
  I learn just OSB, and I tried to test a web service project that I had built. I deployed the project on Weblogic, created the WSDL for the service of the company in OSB and mounted that as well, but when I try to test it, the SOAP response gives the following error: could not find the method dispatch for {http://calculatorservice} doAdd
  
  I use JDeveloper 11.1.1.4, WebLogic 10.3.4 and OSB 11 GR 1 material.
  
  The complete source code is as follows:
  
  Calculator.Java
  
  CalculatorService package;
  
  Import javax.jws.WebService;
  
  @WebService (targetNamespace = "http://calculatorservice")
  public class Calculator implements {CalculatorIF}
  
  @Override
  public int doAdd (int a, int b) {}
  return a + b;
  }
  
  @Override
  public int doSub (int a, int b) {}
  return a - b;
  }
  
  }
  
  CalculatorBusinessService.wsdl
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < name of definitions = "CalculatorBusinessService."
  targetNamespace = "http://calculatorservice."
  xmlns = "http://schemas.xmlsoap.org/wsdl/".
  xmlns:TNS = "http://calculatorservice".
  container = "http://www.w3.org/2001/XMLSchema".
  xmlns:SOAP = "http://schemas.xmlsoap.org/wsdl/soap/".
  xmlns:MIME = "http://schemas.xmlsoap.org/wsdl/mime/"
  xmlns:SOAP12 = "http://schemas.xmlsoap.org/wsdl/soap12/".
  xmlns:types = "http://calculatorservice" >
  
  < types >
  < xsd: Schema container = "http://www.w3.org/2001/XMLSchema".
  xmlns:TNS = "http://calculatorservice".
  targetNamespace = "http://calculatorservice."
  elementFormDefault = "qualified" >
  < xsd: complexType name = 'AddInput' >
  < xsd: SEQUENCE >
  < xsd: element name = "arg0" type = "xsd: int" / >
  < xsd: element name = "arg1" type = "xsd: int" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: complexType name = "AddOutput" >
  < xsd: SEQUENCE >
  < xsd: element name = "result" type = "xsd: int" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: complexType name = "SubInput" >
  < xsd: SEQUENCE >
  < xsd: element name = "arg0" type = "xsd: int" / >
  < xsd: element name = "arg1" type = "xsd: int" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: complexType name = "SubOutput" >
  < xsd: SEQUENCE >
  < xsd: element name = "result" type = "xsd: int" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: element name = "doAddRequest" type = "tns:AddInput" / >
  < xsd: element name = "doAddResponse" type = "tns:AddOutput" / >
  < xsd: element name = "doSubRequest" type = "tns:SubInput" / >
  < xsd: element name = "doSubResponse" type = "tns:SubOutput" / >
  < / xsd: Schema >
  < / types >
  
  < name of message = "doAddInput" >
  < name of part = "parameters" element = "tns:doAddRequest" / >
  < / message >
  < name of message = "doAddOutput" >
  < name of part = "parameters" element = "tns:doAddResponse" / >
  < / message >
  < name of message = "doSubInput" >
  < name of part = "parameters" element = "tns:doSubRequest" / >
  < / message >
  < name of message = "doSubOutput" >
  < name of part = "parameters" element = "tns:doSubResponse" / >
  < / message >
  
  < portType name = "Calculator" >
  < operation name = "doAdd" >
  < input message = "tns:doAddInput" / >
  < output message = "tns:doAddOutput" / >
  < / operation >
  < operation name = "doSub" >
  < input message = "tns:doSubInput" / >
  < output message = "tns:doSubOutput" / >
  < / operation >
  < / portType >
  
  < connection name = "CalculatorBinding" type = "tns:Calculator" >
  < style: binding soap = transport "document" = "http://schemas.xmlsoap.org/http" / >
  < operation name = "doAdd" >
  < style soap: operation = 'document' / >
  < input >
  < use of soap: body = "literal" / >
  < / Entry >
  < output >
  < use of soap: body = "literal" / >
  < / output >
  < / operation >
  < operation name = "doSub" >
  < style soap: operation = 'document' / >
  < input >
  < use of soap: body = "literal" / >
  < / Entry >
  < output >
  < use of soap: body = "literal" / >
  < / output >
  < / operation >
  < / binding >
  
  < service name = "CalculatorSerivce" >
  < name of port = "CalculatorPort" binding = "tns:CalculatorBinding" >
  < soap: address location = "http://localhost:7001 / calculator-CalculatorService-context-root/CalculatorPort" / >
  < / port >
  < / service >
  
  < / definitions >
  
  Now, here's the SOAP messages generated by the console of the OSB:
  
  SOAP request:
  
  < soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
  < xmlns:soap soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" >
  < / soap: Header >
  < soapenv:Body >
  < cal:doAdd xmlns:cal = "http://calculatorservice" >
  < cal:arg0 > 3 < / cal:arg0 >
  < cal:arg1 > 3 < / cal:arg1 >
  < / cal:doAdd >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  SOAP response:
  
  < xmlns:S s: Envelope = 'http://schemas.xmlsoap.org/soap/envelope/' >
  < Body >
  < S:Fault xmlns:ns4 = 'http://www.w3.org/2003/05/soap-envelope' >
  < faultcode > S:Client < / faultcode >
  < faultstring >
  Cannot find the method dispatch for {http://calculatorservice} doAdd
  < / faultstring >
  < / S:Fault >
  < / Body >
  < / s: Envelope >
  
  
  I would be really grateful if someone could point out my mistakes.
  Thank you
  
  Published by: Abdel Paul Sinha on February 4, 2011 19:35

  Are the only differences between what you and I did: -.
  1. I have used message format "document / literal".
  2. I used the wsdl by downloading the server help: http://:/? WSDL.
  3 created xsd by downloading one from a schema imported in wsdl
  4. in OSB, I created the XML schema to xml schema I created in step 3.
  5. in OSB, I created wsdl and edited the reference of the schema imported to point to the xml schema that is created in step 4.
  6. has created the service company and tested ran perfectly and it.

• Cannot access the console of EM on SOA Suite 11 g (404 error)

  I have installed SOA Suite 11 g on a new environment. The administrator of the server and the managed server (soa_server1) start without any error in the newspapers. However after getting started, I am unable to access the console business to http://Host/em because of the 404 handler. Interestingly, I can access the console of administration WebLogic at http://Host/console with no problems.
  
  I have installed SOA Suite 11 g before on my local machine and have never had any problems like this before.
  
  Is it possible to manually start to the top of the Enterprise Manager application? I've seen some advise in previous posts that mention the use of emctl (Enterprise manager command line control) However, this seems not applicable to the app of the MA that runs on 11 g WebLogic application server.
  
  Troubleshooting tips would be greatly appreciated!

  You can access the EM using URLs http://host:7001 / em.

  But for the MS to be present in the area, you must have created your model Enterprise Manager domain is selected. I think, you have not done this step. Log in to your administration of WLS Console, Access deployments. Find an application named em '. If she is not there, then this is the question.

  To get your domain extended with EM, follow these steps.
  1 shut down your servers in the field.
  2 call the configuration wizard ($ORACLE_HOME/common/bin/config.sh/cmd)
  3. choose the option Extend area. Select your domain.
  4. Select the model of Enterprise Manager. Complete the wizard.
  5. start your servers.

  Now, you will be able to access the MS using the URL above.

  There is no need of emctl in SOA 11 GR 1 material. From the server administrator will help you work in EM.

  Hope this helps!

• Repeat the error when installing 11i

  Snoussi,
  
  
  I install 11i in one of the test server Oracle linux 4.6, installing his shot below error.
  ---------------------------------------------------------------------------------------------------------------------
  v f /u02/oracle/upgdb/9.2.0/bin/otrcrep /u02/oracle/upgdb/9.2.0/bin/otrcrep0
  MV: cannot stat ' / u02/oracle/upgdb/9.2.0/bin/otrcrep': no such file or directory
  do: [iotrcrep] error 1 (ignored)
  MV otrcrep /u02/oracle/upgdb/9.2.0/bin/otrcrep
  MV: cannot stat 'otrcrep': no such file or directory
  do: [iotrcrep] error 1 (ignored)
  chmod 751 /u02/oracle/upgdb/9.2.0/bin/otrcrep
  chmod: cannot access to ' / u02/oracle/upgdb/9.2.0/bin/otrcrep': no such file or directory
  do: [iotrcrep] error 1 (ignored)
  -Otrccref link
  RM f otrccref;
  GCC-o otrccref-L/u02/oracle/upgdb/9.2.0/otrace/lib/-L/u02/oracle/upgdb/9.2.0/lib/-L/u02/oracle/upgdb/9.2.0/lib/stubs/ o otrccref-L/u02/oracle/upgdb/9.2.0/otrace/lib/-L/u
  02/Oracle/upgdb/9.2.0/lib/-L/u02/Oracle/upgdb/9.2.0/lib/stubs/ /u02/oracle/upgdb/9.2.0/otrace/lib/otrccref.o-ltracefe9-ltrace9-lnls9-lcore9-lnls9-lcore9-lnls9-lxml9
  lcore9-lunls9-lnls9.
  -ltracept9-lnls9-lcore9-lnls9-lcore9-lnls9-lxml9-lcore9-lunls9-lnls9 'cat /u02/oracle/upgdb/9.2.0/lib/sysliblist' - ldl - lm ' cat /u02/oracle/upgdb/9.2.0/lib/syslib
  list '-Wl,-rpath,/u02/oracle/upgdb/9.2.0/lib:/lib:/usr/lib - lm 'cat /u02/oracle/upgdb/9.2.0/lib/sysliblist' - ldl - lm
  /usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: refers to 'dl_iterate_phdr@GLIBC_2.2.4' the undefined
  collect2: ld returned 1 exit status
  do: [otrccref] error 1 (ignored)
  MV-f /u02/oracle/upgdb/9.2.0/bin/otrccref /u02/oracle/upgdb/9.2.0/bin/otrccref0
  MV: cannot stat ' / u02/oracle/upgdb/9.2.0/bin/otrccref': no such file or directory
  do: [iotrccref] error 1 (ignored)
  MV otrccref /u02/oracle/upgdb/9.2.0/bin/otrccref
  MV: cannot stat 'otrccref': no such file or directory
  do: [iotrccref] error 1 (ignored)
  chmod 751 /u02/oracle/upgdb/9.2.0/bin/otrccref
  chmod: cannot access to ' / u02/oracle/upgdb/9.2.0/bin/otrccref': no such file or directory
  do: [iotrccref] error 1 (ignored)
  -Otrccol link
  
  
  lib - lm 'cat /u02/oracle/upgdb/9.2.0/lib/sysliblist' - ldl - lm 'cat /u02/oracle/upgdb/9.2.0/lib/sysliblist»-Wl,-rpath,/u02/oracle/upgdb/9.2.0/lib:/lib:/usr/lib-".
  LM 'cat /u02/oracle/upgdb/9.2.0/lib/sysliblist' - ldl - lm
  /usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: refers to 'dl_iterate_phdr@GLIBC_2.2.4' the undefined
  collect2: ld returned 1 exit status
  do: [ctxsrv] error 1 (ignored)
  MV-f /u02/oracle/upgdb/9.2.0/bin/ctxsrv /u02/oracle/upgdb/9.2.0/bin/ctxsrvO
  MV: cannot stat ' / u02/oracle/upgdb/9.2.0/bin/ctxsrv': no such file or directory
  do: [ictxsrv] error 1 (ignored)
  MV ctxsrv /u02/oracle/upgdb/9.2.0/bin/ctxsrv
  MV: cannot stat 'ctxsrv': no such file or directory
  do: [ictxsrv] error 1 (ignored)
  chmod 751 /u02/oracle/upgdb/9.2.0/bin/ctxsrv
  chmod: cannot access to ' / u02/oracle/upgdb/9.2.0/bin/ctxsrv': no such file or directory
  do: [ictxsrv] error 1 (ignored)
  CCG o ctxhx-L/u02/oracle/upgdb/9.2.0/ctx/lib/-L/u02/oracle/upgdb/9.2.0/lib/-L/u02/oracle/upgdb/9.2.0/lib/stubs/ /u02/oracle/upgdb/9.2.0/ctx/lib/ctxhx.o-L/u02/oracle/upgdb /.
  -Lm-lsc_ca-lsc_fa-lsc_ex-lsc_da-lsc_ut-lsc_ch-lsc_fi-lsc_lo 9.2.0/ctx/lib/ - lctxhx-lc-Wl,-rpath,/u02/oracle/upgdb/9.2.0/ctx/lib-lnls9-lcore9-lnls9-lcore9 - lnls9 -.
  lxml9-lcore9-lunls9-lnls9 'cat /u02/oracle/upgdb/9.2.0/lib/sysliblist '.
  /usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: refers to 'dl_iterate_phdr@GLIBC_2.2.4' the undefined
  collect2: ld returned 1 exit status
  do: [ctxhx] error 1 (ignored)
  MV-f /u02/oracle/upgdb/9.2.0/ctx/bin/ctxhx /u02/oracle/upgdb/9.2.0/ctx/bin/ctxhxO
  MV: cannot stat ' / u02/oracle/upgdb/9.2.0/ctx/bin/ctxhx': no such file or directory
  do: [ictxhx] error 1 (ignored)
  MV ctxhx /u02/oracle/upgdb/9.2.0/ctx/bin/ctxhx
  MV: cannot stat 'ctxhx': no such file or directory
  do: [ictxhx] error 1 (ignored)
  chmod 751 /u02/oracle/upgdb/9.2.0/ctx/bin/ctxhx
  chmod: cannot access to ' / u02/oracle/upgdb/9.2.0/ctx/bin/ctxhx': no such file or directory
  do: [ictxhx] error 1 (ignored)
  Finished...
  The value of IS_RAC:false
  Restoring links with RAC OUT
  
  Beginning: "do - if /u02/oracle/upgdb/9.2.0/rdbms/lib/ins_rdbms.mk rac_off.
  RM-f /u02/oracle/upgdb/9.2.0/lib/libskgxp9.so
  CP /u02/oracle/upgdb/9.2.0/lib//libskgxpd.so /u02/oracle/upgdb/9.2.0/lib/libskgxp9.so
  RM-f /u02/oracle/upgdb/9.2.0/lib/libskgxn9.so
  CP /u02/oracle/upgdb/9.2.0/lib//libskgxns.so /u02/oracle/upgdb/9.2.0/lib/libskgxn9.so
  / usr/bin/AR cr /u02/oracle/upgdb/9.2.0/rdbms/lib/libknlopt.a /u02/oracle/upgdb/9.2.0/rdbms/lib/ksnkcs.o
  Finished...
  
  Beginning: "do - if /u02/oracle/upgdb/9.2.0/rdbms/lib/ins_rdbms.mk ioracle".
  
  -Link Oracle
  RM-f /u02/oracle/upgdb/9.2.0/rdbms/lib/oracle
  GCC-o /u02/oracle/upgdb/9.2.0/rdbms/lib/oracle-L/u02/oracle/upgdb/9.2.0/rdbms/lib/-L/u02/oracle/upgdb/9.2.0/lib/-L/u02/oracle/upgdb/9.2.0/lib/stubs/ - Wl, e ' f /u02/ test
  Oracle/upgdb/9.2.0/RDBMS/lib/skgaioi.o & & echo u02/oracle/upgdb/9.2.0/rdbms/lib/skgaioi.o' /u02/oracle/upgdb/9.2.0/rdbms/lib/opimai.o u02/oracle/upgdb/9.2.0/rdbms/lib/ssoraed.
  o /u02/oracle/upgdb/9.2.0/rdbms/lib/ttcsoi.o /u02/oracle/upgdb/9.2.0/lib/nautab.o /u02/oracle/upgdb/9.2.0/lib/naeet.o /u02/oracle/upgdb/9.2.0/lib/naect.o /u02/oracle/upgdb/9.2.0
  /lib/naedhs.o /u02/oracle/upgdb/9.2.0/rdbms/lib/config.o-lserver9-lodm9-lskgxp9-lskgxn9-lclient9-lvsn9-lwtcserver9-lcommon9-lgeneric9 /u02/oracle/upgdb/9.2.0/rdbms/li
  b/defopt.o - lknlopt ' if/usr/bin/ar tv /u02/oracle/upgdb/9.2.0/rdbms/lib/libknlopt.a | grep xsyeolap.o > / dev/null 2 > & 1; then echo '-loraolap9 '; fi'-lslax9-lpls9-lplp9-l
  Server9-lclient9-lvsn9-lwtcserver9-lcommon9-lgeneric9-lknlopt-lslax9-lpls9-lplp9-ljox9-lserver9-locijdbcst9-lwwg9 'cat /u02/oracle/upgdb/9.2.0/lib/ldflags'-l
  nsslb9-lncrypt9-lnsgr9-lnzjs9-ln9-lnl9-lnro9 'cat»-lnsslb9-lncrypt9-lnsgr9-lnzjs9-ln9-lnl9 /u02/oracle/upgdb/9.2.0/lib/ldflags - lmm-lnls9-lcore9-lnls9-lcore9 ".
  -lnls9-lxml9-lcore9-lunls9-lnls9 ' cat "cat /u02/oracle/upgdb/9.2.0/lib/ldflags '"»-lnsslb9-lncrypt9-lnsgr9-lnzjs9-ln9-lnl9-lnro9 /u02/oracle/upgdb/9.2.0/lib/ldflags
  -lnsslb9-lncrypt9-lnsgr9-lnzjs9-ln9-lnl9-ltrace9-lnls9-lcore9-lnls9-lcore9-lnls9-lxml9-lcore9-lunls9-lnls9 ' if/usr/bin/ar tv /u02/oracle/upgdb/9.2.0/rdbms/
  lib/libknlopt.a | grep 'kxmnsd.o' > / dev/null 2 > & 1; then echo ""; else echo '-lordsdo9 '; fi'-lctxc9-lctx9-lzx9-lgx9-lctx9-lzx9-lgx9-lordimt9-lnls9-lcore9-lnls9-l
  core9-lnls9-lxml9-lcore9-lunls9-lnls9-lsnls9-lunls9-lxsd9-lnls9-lcore9-lnls9-lcore9-lnls9-lxml9-lcore9-lunls9-lnls9 ' cat /u02/oracle/upgdb/9.2.0/lib/syslibli
  St'-Wl,-rpath,/u02/oracle/upgdb/9.2.0/lib:/lib/i686:/lib:/usr/lib - lm 'cat /u02/oracle/upgdb/9.2.0/lib/sysliblist' - ldl - lm ' f /u02/oracle/upgdb/9.2.0/rdbms/lib/skg test
  Aioi.o & & echo - laio'
  /usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: refers to 'dl_iterate_phdr@GLIBC_2.2.4' the undefined
  collect2: ld returned 1 exit status
  do: [u02/oracle/upgdb/9.2.0/rdbms/lib/oracle] error 1 (ignored)
  MV-f /u02/oracle/upgdb/9.2.0/bin/oracle /u02/oracle/upgdb/9.2.0/bin/oracleO
  MV: cannot stat ' / u02/oracle/upgdb/9.2.0/bin/oracle': no such file or directory
  do: [ioracle] error 1 (ignored)
  MV /u02/oracle/upgdb/9.2.0/rdbms/lib/oracle /u02/oracle/upgdb/9.2.0/bin/oracle
  MV: cannot stat ' / u02/oracle/upgdb/9.2.0/rdbms/lib/oracle': no such file or directory
  do: [ioracle] error 1 (ignored)
  /u02/Oracle/upgdb/9.2.0/bin/Oracle chmod 6751
  chmod: cannot access to ' / u02/oracle/upgdb/9.2.0/bin/oracle': no such file or directory
  do: [ioracle] error 1 (ignored)
  Finished...
  
  /U02/Oracle/upgdb/9.2.0/bin/Oracle did not repeat correctly.
  Please check for errors to repeat the link in this log file

  Hello

  /usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: refers to 'dl_iterate_phdr@GLIBC_2.2.4' the undefined
  collect2: ld returned 1 exit status

  This is due to lack of OS pre - req packages. Please consult the following document to check the packages, you need to install.

  Note: 392311.1 - usr/lib/gcc/i386-redhat-linux/3.4.5/libgcc_s.so: a reference to 'dl_iterate_phdr@GLIBC_2.2.4' the undefined
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=392311.1

  Kind regards
  Hussein

• error tpm_tis and without access to the console to alt - f1.

  Hello

  I have a whitebox test system with the following configuration:

  -Intel DG35EC moherboard

  -8 GB RAM

  -Quad-core Intel Q9550 processor

  I have ESXi 4 installation and it may start on a USB key. After the server is active, I try to reach the console with alt - f1. I can not get a command prompt and can see a message:

  "* Failed to load module of TPM.

  Help, please.

  I don't think that there is a console on esxi... you must use remote cli, although I think there is a way to send not 'supported' the system to get a console... do a search for esxi and not supported

• error on the console after you have added the second vSwitch.

  Hello

  the message on the console appears after:

  I added second virtual switch with vmkernel and service and storage console by declaring open to esx.

  What has happened and what needs to be done to solve this problem?

  The interesting part that it keeps me not to access esx http://192.168.1.2 even on console, it displays 0.0.0.0 (this machine)?

  Note: this is a laboratory configuration.

  Hello

  Yes, in WS and Yes, I would add to the team. I have in my team 2 ESX, OF Smoothwall Firewall and W2K3 servers for vCenter.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• Can someone help with the problems of email account? Messages from the console?

  vcyman , March 9, 2016 13:16

  I had ongoing issues with my Mail months including Spindumps and just doesn't look good, so I changed the e-mail settings in the past according to the directives of the ISP, but now the incoming server is grayed out, more it's time to see if my overall situation needs some changes. As I am researching the current issue of the evolution of the e-mail settings, I see the information that can be linked to a larger problem, so I'm including that in a larger context.

  I use my Web site for most of my email accounts and received error messages indicating that the certificate is not valid. I contacted Hostway and learned that they have their own encryption and don't require SSL, but they said Apple mail works best if I use their specific settings instead of those I have. The server settings entering my accounts existing messaging site are shaded out and immutable. What is the best way to make changes without causing more problems?

  I tried to move the mail account plist.to the trash and restart hoping that would disable the accounts but it didi not work. Or I sign out to iCloud and make changes?

  MORE INFORMATION

  In/Library/Application Support / Mail / Online Account Types/com.apple.updated.mailaccounts/MailAccounts.plist, the Account.plist includes an e-mail account which is Ameritech and not logged into my site.

  in Library/Mail/it is V2 and V3. V2 is V2/MailData/Accounts.plist. V3 contains no Accounts.plist. in MailData. I printed the Accounts.plist. and there are 22 pages of data. Each e-mail account is repeated at least three times and it seems connected to the when I made changes to the account settings in the past.

  This may be related to a larger problem because I have error messages related to the e-mail in the console.

  09/03/16 12:05:22.644 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM DCs [365]: securityd_xpc_dictionary_handler cloudd [429] copy_matching error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.649 PM Mail [634]: cannot load the draft for documentID: C265D900-C6A3-48B9-AF60-C83FE29A7AED

  09/03/16 12:05:22.705 PM Mail [634]: cannot load the draft for documentID: E1D3029B-C2BF-425E-8F67-32C190B420CF

  09/03/16 12:05:23.142 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.144 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.417 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.432 PM]: looking for iCDP status IDDM 61149625 (checkWithServer = 0)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: error XPC while checking if iCDP is enabled for IDDM 61149625: error Domain = NSCocoaErrorDomain Code = 4099 "the connection to the service named com.apple.cdp.daemon was invalid." UserInfo = {NSDebugDescription = the connection to the service named com.apple.cdp.daemon has been invalidated.}

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: connection Daemon invalidated!

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.436 PM]: [AOSAccounts]: [__49-[ACAccountStore (iCloudAccount) icaAppleAccounts] _block_invoke]: accountsWithAccountType returned the error: Domain = com.apple.accounts error Code = 9 '(null) '.

  09/03/16 12:05:23.446 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.716 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:24.076 PM sandboxd [139]: com.apple.Addres (501) ([501]) deny com.apple.cdp.daemon mach-search

  09/03/16 12:05:24.626 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: key :-25300

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: status: power off

  09/03/16 12:49:52.821 PM Mail [634]: * the Assertion failure in French-[IMAPParseContext _parseStatusResponse], /Library/Caches/com.apple.xbs/Sources/Mail/Mail-3112/IMAP/Connection/Responses/ IMAPParseContext.m:956

  09/03/16 12:49:52.821 PM Mail [634]: exception IMAP response analysis: tried to parse a response from status without knowing the separator character.

  I'd appreciate any suggestions.

  Is your IMAP account?

  You have stored messages slot "on my Mac"?

  If create you your account in a new user, it works correctly?  (see below)

  See my answer in a similar debate. Let me know if you need more assistance.

  Re: The first time to open Mail.app: opens the window Import Mail Message - crashes during the infinite-import cycle how to break it?

  Re: Certificate error. When the message appears you must choose "see the certificate", then select "always Trust ' in keychain."

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Place in the new user by logging in under the Apple in the menu bar.

  Log in to the new user.

  You can skip the connection with an Apple ID, unless you want to test an iCloud account. Select continue, then jump.

  Open Mail and add your account. If it's a POP account, make sure that you do not select "remove copy from server after retrieving a message," on the Advanced tab.

  

  You still see the issue?

• Set the Position of the cursor in the Console (console or Windows default or CVI) window

  Hi all

  I'm working on a project for my college class with a large amount of data acquisition. Unfortunately, the part of the assignment asks to do entirely in the console rather than through a User Interface.

  I've programmed in C++ and have used the command gotoxy(). However, this is not part of the ANSI C standard. I can't find any additional information about the position of the cursor in C or CVI standards. Is it possible to position the cursor in CVI? If I have to, I'll resort to create a matrix of character as a screen buffer and encode them manually.

  Thanks again!

  -Bryan

  CVI 8.5

  These functions are part of the windows kernel. simply #include . If you get a link error, these functions should be in 'kernel32.lib' comes with LabWindows/CVI: Add kernel32.lib to the project and everything should be good (search folder x:\Program NIUninstaller Instruments\ to locate, its complete location depends on the version of the CVI you use).

  of course, this means that you must install the Windows SDK: it is an option in the installer of LabWindows/CVI. (you can also download the Windows SDK from the microsoft Web site, but you would be better with one that comes with CVI).

  a short guide on the documentation for the Windows SDK: each function is documented in a single page on every page of documentation for function, there is always a short summary at the end of the page telling you how to use the function: which header file you include, what library file, you must link with and on what version of Windows , the function is supported. Unfortunately, until the CVI 8.5.1 (I don't know for the CVI 9.0), the documentation for the SDK does not include the table of contents, which prevents to find something useful, unless you know what you are looking for the function.