Replace table elements

Similar Questions

• Calculation for table element, then replace in same table

  I have a 2D, c [j, i] table, and I want to perform calculations on each element of this array, c [j, I] = c [j, I] + d * one update [i], so that the same table with the new values.  I installed the structure using a loop and got back each new c [j, I] that I'm supposed to do, but I can't seem to get these new values into the table.  I tried to use the node 'Replace table subset' but I can't seem to connect the output to the same HP. array [j, I] table.

  Any help is greatly appreciated!

  Hi cmersit,

  Why do you need that for? You have not said before...

  Well, create a local to c [j, I], move it to the for loop and connect with the release of ReplaceArraySubset. It's going to hurt needs memory and processing speed and doesn't help here. Replace [result] with a local of c [j, I] for this example. Otherwise use a shift register in the outer loop!

• Catalog cannot be displayed in a table element? Is it possible to do them in a format similar to an unordered products list unordered list?

  Hello to the BC community,

  As indicated above, catalog cannot be displayed in a table element? Is it possible to do them in a format similar to an unordered products list unordered list? Overall, I'm looking to create a sensitive site and I like what the general store looks like, I just want to set the flow of catalogue items as I can with products. List items would be great for a catalog item, but I can't seem to locate it in the documentation that comes with BC. I could be completely missing it and if I did, I'm sorry! Thanks in advance for any help I can get with this topic!

  You just need to change the options of the tags - the Developer Reference
  This is the last parameter of the tag.

• How to replace the element on the page master on master spread [JS CS5]

  Hi all

  There is a big media (scripts) on how to replace the element template on a page of a specific document, but my problem is, I've added new Master spread based on a further propagation where newly added distributed Master I need to replace all the elements to master basic page.

  pageItems [curPageItem] .override (destinationPage)

  works well if you replace the elements of master page on the pages of a document, but what works for replace page elements master master page for example

  pageItems [curPageItem] .override (destinationMasterPage)

  Thank you

  Mac

  Similar code worked for me (in CS4 - the machine, I had very practical is the one I use to accompany clients on older versions). Are you sure that your destinationMasterPage is a page and not a spread? This would cause a failure.

  Dave

• In place the structure with replacement of table element uses wrong index

  Hello

  I use the place in structure of elements and notice any strange behavior: if I replace elements in a Subvi and then calling VI, the index is off by one calling VI, most of the time. I saw one or two tracks where the index was correct. Searching for the forums have provided other problems with in place it the structure but not exactly it.

  Attached are a couple of screws demonstrating the problem and some screenshots.

  It seems that you have a problem of optimization of LabVIEW.  It seems that the value of the line is get incremented in your Subvi and that it is somehow going to the main VI.  If you always put a copy in your reset_selections.vi call, I was not able to get the error to occur.  There was a couple of bugs similar to this one.

  You can always add another copy in front of the call to reset_pages.vi, but I never had the problem to occur without it.

  

  I have attached the modified so VI.

• How to replace the element in the cluster in a table?

  Hello

  I understood better choice is to initialize the array first and replace the items in a table instead of insert the new item in a table for example in a while loop.

  So I started to evaluate since I asked where I want to read a lot of measures from a txt file and display them in a XY Chart. XY graph must show Y value and corresponding value X is red if it is out of reach and green if it is in range. I found a solution to do it with an array of clusters.

  In the attached example, I have represented two different methodologies. My problem is that a superior solution does not display the contents of all measures. Can someone tell me what I am doing wrong?

  Kind regards

  Petri

  I changed your VI top so that it works. Please take a look and see what I've done. It is also much faster.

• 'Replace the element of the array' replaces not only indexed items

  Hey masters LabView,.

  Fairly new to Labview and I'm trying to sort out how to create a table of images. I know that the total number of images I want in my 'stamp' (not the buffer of LabView), so I'm the initialization of an array of this size. Can I bring this table in a loop For with a shift register, and I want to capture images and write them in the table of the buffe continuously (a comment: I do a circular buffer, but I don't want to implement in LabView, because there a lot of things that I don't need and I will eventually have to the process to be as thin as possible).

  Here's the problem (I assume an implementation, that does not decompose LabView):

  I expect:

  AN element of the array, in the position indicated by the index of the loop [i], is replaced by the image newly caught

  I get:

  All THE elements of the array becomes the image newly caught.

  (I can tell because I taste under the table, grabbing a single image from a constant "Check Array" index - may 7, for example.) But my index of the loop [i] value is 13, and the subsample becomes again the image newly caught.

  What a ridiculous thing I am doing wrong?

  Any help would be greatly appreciated.

  

  Ah, I just noticed something.  Initialize you an array of references at the beginning of your program, but it is a complete picture OF THE SAME REFERENCE: you must call the IMAQ Create in a loop so that you actually get unique references in your table.  You must have a different NAME for each image.

• Problem using the list separated by commas with nested table element

  Hello
  
  I have a list separated by commas like this:

  H23004,H24005,T7231,T8231,T9231

  And want to create a function that creates a where clause clause for each element with an output like this:

  UPPER('H23004') IN (UPPER(charge))
  OR UPPER('H23005') IN (UPPER(charge))
  OR UPPER('T7231') IN (UPPER(charge))
  OR UPPER('T8231') IN (UPPER(charge))
  OR UPPER('T9231') IN (UPPER(charge))

  Here's my test function that is not working properly:

  create or replace function FNC_LIST_TO_WHERE_CLAUSE(v_list in VARCHAR2) return varchar2 is
   -- declaration of list type
   TYPE batch_type IS TABLE OF pr_stamm.charge%TYPE;
   -- variable for Batches
   v_batch batch_type := batch_type('''' || replace(v_list,',',''',''') || '''');
   return_script varchar2(1000);
  
   BEGIN
   -- loop as long as there are objects left
   FOR i IN v_batch.FIRST .. v_batch.LAST
   LOOP
     --DBMS_OUTPUT.PUT_LINE(offices(i));
     -- create where clause
     IF i = 1 THEN
       return_script := 'UPPER(' || v_batch(i) || ') IN (UPPER(charge))';
     ELSE
       return_script := return_script || ' OR UPPER(' || v_batch(i) || ') IN (UPPER(charge))';
     END IF;
   END LOOP;
  
   return (return_script);
   end;

  The out put looks like this:

  UPPER('H23004','H24005','T7231','T8231','T9231') IN (UPPER(charge))

  I don't know what I did wrong? It calculates the amount of the incorrect array element! (v_batch. Must be 5)
  v_batch. FIRST = 1
  v_batch. LAST = 1
  
  Kind regards
  
  Tobias

  Try this...

  declare
  text varchar2 (1000): = "H23004, H24005, T7231, T8231, T9231;
  v_where varchar2 (1000);
  Start
  Text: = text | «, » ;
  While instr (text, ',') <> 0
  loop
  v_where: = v_where | ' UPPER ("': substr (Text, 1, InStr(Text,',',1)-1) |") ' IN (UPPER (load)) OR ';
  text: = substr (text, instr(text,',',1) + 1);
  end loop;
  v_where: = substr (v_where, 1, length (v_where)-3);
  dbms_output.put_line (v_where);
  end;

  convert it to function...

• Replace table 1 d at a specific point in the 2D array

  Hello

  I have a chart 2D with a lot of information and the only want to replace data at a specific point, see image:

  When I use the subassembly to replace I can replace only a specific line and column item...

  Best regards

  Thijs Boeree

  I think I already had... Without a loop!

  I use the table of indexes on the 2D table then I use the subset of the table insert table 1 d, here you can give a hint and replace the 2D array again with the newly formed 1 d array!

• Obtaining of row and column of a table element

  Hello

  I have a table of 24 rows and column 24 giving me a total of 576 items. How can I get the row and column of a particular element in a table in LabView. For example if I write to item 127 How can I get the column and line item 127 is located.

  Kind regards

  Bastien

  Hi Marion,.

  Maybe just need to find the right "address" element in your 2D table?

  Use something like this:

  

  Maybe you have to out of line & column according to your numbering scheme...

• New object Vi - replace table subset, resize and son Script

  Hi all

  I can create a subset of table replace.

  My problem is:

  I have what it takes to resize it (add more inputs) and wire the in and outputs.

  Pls help!

  

  I want to generate semthing like this:

  

  There are two methods of the class GrowableFunction, AddChunk, and RemoveChunk, which can be used to add or remove entries X pieces from the top or the bottom of the node.

  

• problem by removing table elements

  I want to remove some specific instruments in the table (receives program beginning with loop and end element) for which I use table 1 d search for clues then usign remove table, but is not remove all items, or the output is coming as planned.

  The vi which I use to delete items from table is attached.

  saved for 2011

• Insert table elements

  Hello, I am new to Labview. I need to build a 1 d array of 10 items. I have a digital control to insert items to the table. Every time that, if I change a digital command value, element should be inserted in table. I would do it with registers at offset. Help, please. Thank you.

  Like this?

• Replace the elements of vertex

  Dear,

  We are in the process of implementation Oracle EBS R12 - INCE for user US, as you know that Vertex calculates the tax as a third party for Oracle, our requirement is to override some taxes (Ex. FUTA, SS, ETC.) for some payroll run periods.

  Please indicate how to achieve this requirement

  Thank you

  Hi Arif,

  I fixed this problem by implementing the procedure below, note: (FUTA) element for example.

  1. from the employee tax information, check the waiver for the FUTA element. then

  2 Add the element (FUTA) manually on the inputs of the alternate value to pay the employee element. then

  3-pay delivery / Quick Pay.

  4. then you will got the replacement value of the item (FUTA) in addition, you receive the calculations of vertices for the other elements.

  Any comment for this solution?

  Best regards

  Anas

• Issues of conversion table: element

  For example, in a table of conversion (FM12) an element must contain what might be in there? For example:

  Question has)

  E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | E:section [S2]) * in the Section [S1] element.

  In other words, included it 1 or more E:Section [S2] can itself contain an E:Section [S3], but the [S1] Section would not just outside the Section [S2]. So, should I include E:Section [S3] within the definition of Section [S1]?

  ==========

  Issue B)

  Also, I don't get specified TEXT anywhere in the samples, I look. TEXT must be in my conversion table?

  Am I right that I should add my lists to the right, if I want lists to be valid in the Sections?

  ==========
  

  Question C)

  
  

  In addition, I understand that the following specifices 0 or more of the content items: E:Head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | E:section [S2]) * in the Section [S1] item.

  However, the reality is for E:Secton [S2] there must be two or more none (there can be only one). Then, the following text describes what I just said?

  E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | (E:Section [S2],E:Section[S2]+)) *

  
  

  Thank you

  
  

  Sean
  

  Sean,

  This can be complicated to address with simplicity (like language), but I'll take a shot at him.

  -------------------------------------------------------------------------------

  Question has)

  E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | E:section [S2]) * in the Section [S1] element.

  In other words, included it 1 or more E:Section [S2] can itself contain an E:Section [S3], but the [S1] Section would not just outside the Section [S2]. So, should I include E:Section [S3] within the definition of Section [S1]?

  RW: No. each rule as this specifies the child direct candidates only. You would have a separate line in your table in the Section [S2}, which indicates its respective candidates children (a which Section [S3].)] Similarly, Section [S3] would have its own line, etc.

  ----------------------------------------------------------------------------------

  Issue B)

  Also, I don't get specified TEXT anywhere in the samples, I look. TEXT must be in my conversion table?

  Am I right that I should add my lists to the right, if I want lists to be valid in the Sections?

  RW: no, by nature, a text node is locked to his current position, as a child of its current parent. Everywhere where parents who will, the child text node needs to go also. So no choice in the matter. Of course, however, the general rule in your EDD must allow text as long as it is necessary to maintain the validity.

  
  

  Another explanation, imagine how a text node is displayed... usually by wrapping text in a component of character Beach, where there is additional text before and/or after the inside of the paragraph. The conversion table normally does this skin based on the character formats, then text nodes are just there and fixed.

  -------------------------------------------------------------------------------

  Question C)

  In addition, I understand that the following specifices 0 or more of the content items: E:Head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | E:section [S2]) * in the Section [S1] element.

  However, the reality is for E:Secton [S2] there must be two or more none (there can be only one). Then, the following text describes what I just said?

  E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | (E:Section[S2],E:Section[S2]+)) *

  RW: The logic seems wrong to me. I don't know exactly what your EDD or source file looks like this, but I think more in the sense of something like:

  
  

  E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor) *, article [S2], article [S2] +.

  
  

  Otherwise, you might get more

  , etc. after the sections. While we are on this issue, let me throw out some thoughts...

  
  

  -You must decide if you try to apply strictly the structural rules here or simply to get the optimal structure applied. As a general rule, a rule of conversion table can be more lenient, so it may capture abnormalities that can be cleared up later using the validation of ESD. You come with additional consideration of another agreement, that an article must begin with a

  I would usually use a simpler rule, such as:

  
  

  E:head [H1], (p | ul | ol |) GRAPHIC | Table | Anchor) *, Section [S2] *.

  
  

  It is perhaps more lenient than the structure that you intend to apply in your documents. But it is much more likely to get your most feasible initial structure from the beginning. During the cleanup after conversion, it is easier to correct a little lost

  elements only to the rearrange a bunch of hierarchies section, everything simply because you were looking for perfection in the first passage.

  
  

  -Once again, although not knowing your EDD, this jumps at me... by putting GRAPHICS, table and anchor in a single rule, this means they must be brothers and sisters. However, from previous conversations, I'm suspicious that they are not. In other words, I suspect that the anchor can be one parent to the other two. If so, this rule should be anchor only and it should be separate rules to push the GRAPHICS elements and table under anchor, then this rule simply has to pull on the anchor and children.
  

  -------------------------------------------------------------------------------

  I hope this helps!

  Russ