Replace the images with the small number of pixels

Similar Questions

• Script to replace the small caps that are typed in capital letters with capital letters (A = > a, B = > b, etc...)

  I am looking for a way to replace the small caps that are typed in capital letters by their normal equivalents.

  I have a text that contains many names that should all be set in small capitals.

  In fact, they are, but because the letters are used for the first letters that they don't fit.

  In short: I would like to be able to look for A, B, c... (in small capitals) and replace them with (a, b, c...) in small capitals only once.

  (compare two tables?-> is this possible in indesign scripting)

  Hi Cramik,

  Try this.

  var doc = app.activeDocument,
      _char = doc.stories.everyItem().characters.everyItem().getElements();
  
  for(var i=0;i<_char.length;i++)
  {
          if(_char[i].capitalization == Capitalization.SMALL_CAPS)
          {
                  _char[i].capitalization = Capitalization.CAP_TO_SMALL_CAP;
              }
      }
  

  Kind regards

  Cognet

• Photosmart Premium: does not copy after replacing black toner XL and colors - but has not replaced the small black

  Printer recognized all the replaced cartridges. It shows a black small as 'used '.  You wonder why it won't copy from the XL Black cartridges.  page is completely blank, unless I select color copy and then only a header is printed.

  I was wondering if I should also replace the small black cartridge.  If so, what is the purpose of the XL Black cartridge?

  test page printed out as Virgin.

  Hi @lisasw2003,

  Welcome to the Forums of HP Support! I understand that you have recently changed the cartridges on your HP Photosmart Premium, you have not replaced a smaller, and now, you are not able to copy.  One of the black cartridges is regular black and the other is a photo in the black, which is the difference between the two. Although you can't print photos, it gets ink in the cartridges.

  Please replace the used cartridge and you should be up and running again. I hope this helps!

  Thank you

• Replacing hard drive with a smaller

  I'm fixing a friends G62 (G62-B27SA to be exact).

  It keeps failing hard drive tests so I'll replace the drive and restore the system with the recovery CD

  The current drive is a 500 GB WD Scorpio Blue.

  My question is - the recovery refuses to fill out if I replace the drive with:

  a / a 320GB Scorpio blue

  b / a 500 GB Toshiba.

  I'm not sure how limited the system of specific components.

  Hello:

  You can almost count on the fact that the recovery discs do not work on a hard drive smaller than that which was originally installed.

  I do not think that the brand of hard drive will also count as long as the size is not less than the original one.

  If you can still read all 25 characters of the product key of W7 on the Microsoft sticker on the bottom of the PC, and the recovery disks do not work, simply do your own installation of W7 media and allows to install W7 on any hard drive size/brand you want.

  Here's how...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

• Replace a pic with another pic / replace one image with another

  Hello

  I created a symbol with a photo and text. I duplicate my symbol and now I'll like to replace my pic duplicated using a new peak. Perhaps, it's simple, but I can't find the way :-(

  Hello

  I created a symbol with an image and text. Symbol of my I duplicated, and now I'd like to replace the image of my new symbol by another. Maybe it's simple, but I have not found how to do :-(

  If you want 2 symbols with different images, you need to duplicate the symbol in the library and then swap the image on them.

  or you can change the image in the code with attr or css.

• Replace an image with background

  I converted the movie 8 mm in the 1950s in the South Pacific to DV.  Unfortunately, a part of the cobweb of inside film camera 8 mm appears in the upper left corner of the image.  I would replace the Cobweb throughout the video with the background by using a method that has been shown to me during a video presentation several years ago.  I believe that this method using the professional version of After Effects. I use Creative Suite 4 Production Premium.  I got tired of looking for a post dealing with my problem, but I'm probably not using the correct terminology.  Is it possible to do it and how?

  http://help.Adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103906c6dea-7c5ea.htm l

  Mylenium

• replaced the monitor number invalid svc code

  Hello, I recently gave in my Dell UltraSharp U2913WM to repair his apparently broken screen matrix and I learned by the official authorized repair center that dell would repair her, instead, they embarquerions me a new. I got the monitor in a fortnight, but I was afraid that she had no packaging, it was dusty and had used air. I checked the service tag and expess svc code, none of them where valid.

  If it was a scam? Replaced monitors are shipped without any brand and accessories package, or with a tags valid and codes the svc?

  No, not a scam. They are correct, Dell does not repair the monitors.

  Policy of Dell on monitor to nine = trade
  * If the monitor Exchange is Setup inside the first 30 days of the date of the original invoice, the replacement will be New
  * If the monitor Exchange is Setup outside the first 30 days of the date of the original invoice, the replacement will be refurbished
  * Handed to nine monitors may have aesthetic problems which do not performance
  * Handed to nine monitors do not come with all the cables are not in the original box
  * Handed to nine monitors service tag may come from a different region, that's why you don't see it on your Dell regions website. The original purchased warranty period is related to your order number and customer of Dell

• Find and replace the phone number on 1000 PDFs

  Hello

  Anyone know of a faster way to find and replace text (phone number) on a PDF, we have a 1000 needing PDF files

  Edition, pitstop even can't do it quickly.

  Thanks in advance

  Paul

  PDF files were not intended to be edited on such a scale. The only way that such a task can be automated is by the new text which is superimposed on the old, with fields or comments and then flatten the file. But if the location of the text changes a file in a file, or the length of the new text is not exactly the same as that of the former or the font properties are not known in advance, this becomes almost a mission impossible.

• How to replace the call number part on a SIP section if none is present

  Hello

  I have a 2821 router that is connected to a SIP trunk.  This router also has a PRI interface that is connected to a PBX Mitel.  The Mitel used the router has a primary connection to the PSTN.

  The Mitel will send the party call number most of the time, but sometimes it isn't.  All calls that are sent to the SIP provider without a party call number are deleted.  I don't know if can substitute part number calling using the command in clid on the Dáil peer, however is it possible only override the calling party number if I do not get one of the Mitel?  He got a number of appeal left like a DID I want to pass along in the SIP call.

  Thank you.

  You should be able to do it with a voice translation rule that matches an empty ANI.
  30rule translation-rule voice 1 / ^ $\+631689\(...\) / / 01689\1/rule 2 / ^ $/ /555666777/
  translation-profile PSTN-OUTtranslate of the voice calling 30

  First rule to match a real number to a PBX, to adapt according to your needs. The second rule matches a null value and changes to 555666777, who adapt to what you would like to send to your phone company.

  Do not forget to rate helpful responses and identify useful or correct answers.

• How to limit the small number of users in the group to update the fields in the table of the adv

  I have integrated a custom in customer support specialist area. Custom zone advanced table with some columns editable.
  
  My cusotmization works fine, but only some users need access to
  addmorerows - button in SD in my rn custom table
  -col1 should be updated and for the rest read-only
  
  These users are in the same group of resources than others, but some people need more energy than others...
  How can I do?
  
  Thank you

  Hello

  Amol, I could filter the users and rendered all property, but they would add more users in the future, and this change would require the amendment of the code and therefore recompile

  You can create a list of choices and store valid usernames here.

  And in the application process first enter the username.

  User String = pageContext.getUsername ();

  Now check whether or not this user is in this search

  Create a prepared statemnt as select count (*) in the fnd_lookups where lookup_type = 'test' and lookup_code =: 1

  then pass the user name as lookup_code.

  If count > o which means that there is a row, and then set made by property...

  In this way, you have no need to recompile any code... just add new values in search of...

  Thank you
  Gerard

• replace one image with another

  I have two images of the same radial venn diagram, created in Powerpoint. I caught the with Jing and create png: ILM_model and ILM_Mod1 (see images below).

  I want an image to blend into one another, so it seems that I am just pointing out the Center and support node. I tried simply fade on while the other fades in, but I get this weird distortion of red and yellow on the edges in the cross-fading. In addition, the image quality is deteriorated. I took a screenshot to show you.

  http://screencast.com/t/nygksaVXTJ

  

  Check the quality setting on the slide/s where you have this diagram and the value of high quality.  Your screencast looks like you could use only the low quality (8 bits) at the present time.

• How to replace one image with another

  I have a page that displays the results of a search for information about a club. One of the elements is the logo of the club. It is displayed by using the following code

  < img src = "<?" PHP echo $row_clubedit ["club_logo_url"];? ">" alt = "Logo of The Club" class = "logo" title = 'in the Club Logo">

  It works fine, except when no club has been selected, in which case it indicates the default polling point in a blue box.

  It would be nice if I could display the Logo of the Federation, to which all clubs belong, until a club is chosen.

  Y at - it a simple way to define a default image that would be replaced from a set of data.

  $row_clubedit ['club_logo_url'] contains the url in the log format http://www.Club.org/clublogo.PNG

  < img src = "<?" PHP echo ('federation_logo_url');? ">" alt = 'Logo of The Club' class = 'logo' title = ' The Club'c Logo ">

  The logic I guess would be

  If there is no such thing as club_logo_url

  then print the logo of the Federation,

  otherwise print the logo of the club.

  How you code that in php?

  I am only a beginner in PHP.

  "http://www.club.org/clublogo.png": $row_clubedit ['club_logo_url'];? "". ">" alt = "Logo of The Club" class = "logo" title = 'in the Club Logo">

  must be done

• Replace the Windows 8 of HPs recovery image with windows 8.1

  Hello

  Is after going through the upgrade process to windows 8.1 on my HP Envy X 2, now possible to replace the recovery image by default on my partition recovery with one for version 8.1?  I don't want to have to re - update if I do a "refresh your PC without affecting your files' or 'remove all and reinstall Windows.

  Is it possible and supported by HP to change the recovery image in the recovery partition?

  If so, is there any procedure for support to do?

  Concerning

  Anthony

  Sorry, but no.... the Windows 8 by default on the HP Recovery partition recovery image is the only one available. It's the image of origin provided by HP and there is no procedure or the option to change or replace this image with a newer version.

  Please see HP Forun thread titled "8.1 recovery disks" for more information on this topic. My suggestion is to use Windows "Backup of System Image" utility to create a picture of the partition Windows 8.1 as it is currently, on an external hard drive. If your computer develops questions or you need to replace the hard drive, all you have to do is to "restore" the image on the computer. Please see Windows 8.1 Tip: use System Image backup for instructions on creating and restoring a 'Windows - System Image backup.'

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Replace the last dialed number

  Is it possible to always overthrow the composition of the last number with a different contact number? By doing so, I would like to achieve that by hitting the button Redial (also in my Kia car) I'll always dial my wife.
  Thank you.
  David

  Create a background application
  http://supportforums.BlackBerry.com/T5/Java-development/create-a-background-application/Ta-p/445226

  You can save a http://www.blackberry.com/developers/docs/7.1.0api/net/rim/blackberry/api/phone/phonelogs/PhoneLogLi... that is called whenever the call log is changed.
  You can then replace the number (and perhaps store, so when you replace the next number, you can restore the old one?)

• Results by replacing the Image on the button, display the TextInput.

  Hello

  I'm working on an existing Application, which is built in Flex 3.

  As I do some improvements of the existing Application, as part of it when I tried to add the threshold, which will be the server as my ToggleButtonbar data provider.

  < mx:Array id = "menuArray" >
  < mx:Object label = "People Search" icon="@Embed (source =" / images/final/contexts. ") PNG') "/ >"
  < mx:Object label = "Research system" icon="@Embed (source =" / images/final/contexts. ") PNG') "/ >"
  < / mx:Array >

  
  Now the problem is that,

  If I add these Images, it is displayed correctly and if I replace these IMages with other Images, there is a lot of variation in TextInput appear.

  Please let me know, why is this, what could be the problem.

  Thank you.

  I think we would need to see more code and a better description of what

  ways to change.