How to replace the call number part on a SIP section if none is present

Similar Questions

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• Replace the Caller-ID by 'name' of the HuntGroup or BACD called

  Hello guys,.

  installing a new UC560 for a client and he asked that I don't know if it can be configured on the system (probably not by the CCA, but maybe CLI?)

  I put a few B - ACD queues, and some groupings of posts too, to manage the bilingual calls.

  When these groups of B - ACD and hunt are called, the customer is no need to see the phone number, but rather to know which queue or huntgroup was called, so that they could answer the call in french or English from the beginning.

  Is it possible to replace the caller id, when these specific benefit and bacd numbers are called?

  I would need the following

  BACD1 (#870): French of Customer Service

  BACD2 (#871): English Service customer

  HUNT1 (#850): billing

  HUNT2 (#851): accounts payable

  Let me know if this is possible and how (of course)

  Thank you!!!

  The only thought that comes to mind is using a TCL script to do.

  Very good documentation on TCL scripting is available in UC500/FMC.

  Please note that it definetely would NOT be taken in charge of Cisco.

  If you need help, I could probably help, otherwise Paolo Bevilacqua is a bit with TCL and might have a solution for you.

• How to replace the CD/DVD-Rom on Satellite Pro 2100

  Hello

  My laptop's dvd - rom drive is old and broken, now that I have here an other dvd - rom drive, but I don't know how to remove the old dvd - rom without removing all parts of my laptop. Is there some service manuals how to replace the dvd - rom drive?

  Hello

  I m not 100% sure on the CD/DVD drive replacement on this laptop, but I assume that the procedure is very similar to other portable players.
  For the most part the ODD is secured with the screw at the bottom of the unit.
  You will need to remove this screw to get out and to swap the drive.

  But be careful and don t there if you have no experience!
  Moreover, not all readers are compatible and supported in reason parameters master/slave/c-salt. If you n t know which drives are compatible you should ask the ASP in your country for advice!

• Qosmio G20: How to replace the keyboard

  DOES ANYONE KNOW HOW TO REPLACE THE KEYBOARD ON A QOSMIO G20?

  Hello

  I m not an owner of the Qosmio G20, but the replacement of keyboard on the G20 is very similar to another series of laptop.
  If you want to remove the keyboard please follow these steps:

  1.) open view.
  2.) Insert your finger into the slot between the reinforcement of the keyboard and the computer. Then,
  Lift the keyboard bracket to unlock and remove.
  3. remove 1 screw from the keyboard hold the plate.
  4. remove the screws fixing the keyboard
  Lift the upper part of the keyboard and turn down the palmrest.
  6. remove the 2 screws of the plate support keyboard and remove the
  keyboard support plate.
  7 disconnect the cable from the keyboard connector on the system board CN3200.
  8. remove the keyboard.

  All that s

  But note; If you have no experience, please don t remove the keyboard.

• Satallite A100: How to replace the keys?

  Is there a manual on how to replace the keys once they come out?

  My Satallite A100, a year, lost two keys a few weeks ago, and I am unable to replace them, even if I have all the parts (little). It got even worse when some more broke recently, when my grandson some peeled off, using exhibit created by the keys already disappeared.

  Thank you!

  Hello Mike

  Read your ad I don't understand exactly what is wrong with your keyboard but deleting and creating keycaps (plastic with written symbol) is not problematic. You have to just put this right into place and push it gently. You will hear a click and the key CAP will be back to the square.

  Under this cap is placed small plastic mechanism. It contains two small plastic parts. If they are deleted from the bottom, you can put them inside once again. To see how it looks like to remove any other key cap and see how it is placed.

  I did the same today, and with a little patience you can put it in the right position again.

• How to replace the motherboard on the Pavilion p6550z

  How to replace the motherboard on the Pavilion p6550z

  Depending on where you have acquired your replacement Board Aloe, it may be 'tattooed' with the name of the model, product number and the serial number of your computer.

  Use these HP guides as needed.

  (1) unplug the computer and hold power in 5 to 10 seconds.

  (2) on the side of the cover (see guides above)

  (3) place the case on the closed side with the open side facing upwards

  (4) take a photograph detailed inside your computer... take more if necessary

  (5) unscrew the restraint of external expansion card (see guides above)

  (6) disconnect the power supply connections to the motherboard and all devices... tag and/or take more pictures

  (7) remove the... rock expansion cards cards gently just pulling up

  (8) unplug data cables from the motherboard and readers... tag and/or take more pictures

  (9) disconnect remaining USB switch, connections etc... once again, the label or take more pictures

  (10) remove all motherboard screws on the case and remove the motherboard

  (11) reverse the steps, starting with #10 and working #1

  Good luck

• How to replace the 'full' Menu Option and "close".

  Hi all

  I need to know how to replace the full menu option and the narrow, while I don't have a menu option in my class of the screen, and also I do not call superclass «super(DEFAULT_MENU |)» defult builders DEFAULT_CLOSE); »

  can someone give me some samples?

  Thank you very much

  Override the makeMenu() method in your form class and leave it empty.

• How to determine the total number of images in the external .swf file loaded

  I have to be able to load both external .swf files and make them play in order. To do this, I need to know the number of images in the first .swf file so I can check _currentframe against _totalframes to determine when he is finished playing so that I can load another.

  Most of the stuff I see indicate that _totalframes on an external .swf can be determined by loading the .swf in a container clip and then check using a listener in the .onLoadInit. Like this:

  ------------------------------------------------------------------------------------------ ----------------------------

  this.createEmptyMovieClip ("tester_mc", 1);
  var mcListener:Object = new Object();

  mcListener.onLoadInit = {function (target_mc:MovieClip)}
  target_mc.onEnterFrame = function() {}
  If (this ._currentframe > = this ._totalframes) {}
  trace ("total frames =" + this ._totalframes);
  delete this.onEnterFrame;
  } else {}
  trace (target_mc._currentframe + "OF" + target_mc._totalframes);
  }
  }
  }

  var test_mc:MovieClipLoader = new MovieClipLoader();
  test_mc. AddListener (mcListener);
  test_mc.loadClip ("Ad_Group.swf", tester_mc);

  ------------------------------------------------------------------------------------------ -------------------------------------

  Unfortunately, this doesn't seem to work. The trace will always return a total number of frames of 1.

  I guess it's because the container clip has only 1 frame, and the external .swf timeline seems to be ignored.

  I would appreciate any ideas on how to raise the total number of frames of an external .swf file or, Alternatively, put it another way when it's done playing. (Not only the loading, but play until the end.)

  TIA,

  C

  I guess it's because the container clip has only 1 frame, and the external .swf timeline seems to be ignored.

  I wouldn't imagine. My guess is that the main scenario for the external swf file has only 1 frame and the rest of the animation is inside a movieclip in this timeline. You publish this swf? Can you open the FLA and check how many images is open on the main timeline?

  The approach that you have mentioned is about what there is. But he knows check a chronology. If there are many nested movieclips, it may be impossible to understand what timeline you really want to be 'THE' full chronology.

  If you have the FLA, you can have the video call function on the _root timeline which tells the main swf that has completed a movieclip or something like that.

  Also, I have in my head somewhere that I recently saw something that someone made similar to this one, but do not remember... If it appears in my head that I will post.

• How to replace the title of forms using Call_FORM?

  I have two forms, a form and form-b. Form-a call form-b using Call_FORM, and form-a title now is replaced by form-bs' return to form-a. How to replace the wrong title in form - a?

  Jinlan,

  Please read on [Forums label | http://forums.oracle.com/forums/ann.jspa?annID=719].

  Kind regards

  Manu.

  Published by: Manu. September 30, 2009 23:28

• How to replace the contents of the settings/passwords backup server / current browser bookmarks?

  Classic scenario: after the bookmark long manual organization Firefox Sync adds trash of its server to my laptop or tablet.

  Where can I find how to replace the content of the backup of the server by settings/passwords / current browser bookmarks? Stupid me, I put a new synchronization and lost this ability.

  It is not recommended to go back to the old version of Sync

  The old version is removed he'll stop being available soon, it takes getting used to using the new version.

  IIRC, it is actually possible to force synchronization of the old working with Fx29 & Fx30 using an old profile or preferences of piracy, but I don't think I should encourage users to try this, but it would be better than using an older version of Firefox which is really bad. In fact using an old outdated version of Firefox is so bad, that it is customary to recommend using a browser on alternative day of someone else instead.

  Firefox ESR is aimed at corporate users, definitely, at the moment, it will use the synchronization of the former. Who will update soon to use synchronization well again, and this time, I guess the synchronization of the former will probably totally frowned upon for example are not available at all.

  It is possible to use the feedback system to leave a short comment on Sync. I would recommend this making, but at least to make very many people of spirit comments that I doubt will have no effect.

  • Use https://input.mozilla.org/en-US/feedback
    • Display interactive content available here https://input.mozilla.org/en-US/ eg Sync comments

• How to replace the optical drive on the Tecra R940

  Hi all.
  I search everywhere trying to see how to replace the ODD (optical disc drive) of a laptop Toshiba Tecra R940? pt439a-00n003
  its supposed to be easy, but can't get out.

  Anyone know where I can get some info on how to make the?

  Thanks for reading!

  I think that there are just one or two screws holding it on the basic coverage, it then behind the scenes.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Qosmio G50 - 10J: how to replace the optical disc drive (ODD)?

  Hello

  the optical drive of my Qosmio G 50 does not work properly, it reads only some movie-DVD, but unfortunately not videogameDVDs at all, so I can't install any games.
  The guarantee is also outdated. So I wanted to ask if it is possible to change the disk myself, if it is then how I had to do and if by the laptop would be in
  risk to get damaged?

  I would be very grateful for each tip and all the help guys can give me!

  Best regards
  a.z.

  Hello

  In various cases the ODD replacement is very delicate.

  If you wish, you can consult this forum category.
  Here you will find some videos how to replace the ODD on the different laptop models:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=115

  This is also a nice Youtube Channel which provides the instructions how to replace the ODD:
  http://www.YouTube.com/user/toshibaeuropesupport

  But the ODD laser lens may be dirty. In my case I could solve similar problem, cleaning the lens of the laser by using a cotton ball and alcohol tip.
  But make sure that this!

• How to replace the HDD on Satellite 1130?

  How to replace the hard drive in this notebook?

  Hello

  If I remember well HDD is under the optical media drive. Optical media drive is fixed with a screw that you see above the player. Remove the screw and remove the drive from the Bay.

  HARD drive is fixed, I think, 4 screws (probably black). When the screws are removed you can use two fingers to remove the HDD from the connector plug. I hope you now know how to put the new HARD drive.

  Good bye