ENVY 15-j037tx Notebook PC: Wireless poster full bar but can not conect

Similar Questions

• HP ENVY 17-j053ea Notebook PC: windows post 10 install; touchpad does not work!

  Hello

  I pray that someone can help me.

  Brought my HP ENVY 17-j053ea Notebook PC early 2014, work very well running windows 8.1.

  In the month of August / Sept upgraded to windows 10 and that s when the problems started.

  My touchpad has stopped working... I tried a multitude of things that sometimes worked, but after a few days the pad has stopped working again.

  The problem started in the month of August on vacation so I installed the following:

  Driver and utility Chipset

  Intel Management Engine Interface (MEI) driver - sp63410

  Rapid Start driver Intel - sp63411

  Smart Connect driver Intel - sp63413

  Synaptics TouchPad Driver - sp63417

  HP Notebook System BIOS update - sp69886

  HP Notebook System BIOS Update (Intel processors) - sp66941

  The event system HP utility - sp65792

  Intel Rapid Storage Technology driver - sp63554

  This solved the problem for a few weeks, but then the touchpad stopped and started periodically and eventually didn't work for about 2 months.

  While the Forum last night I fought, I found the resolution posted by DanG82 with the title:

  HOW TO TROUBLESHOOT UPGRADE POST-WINDOWS 10 ON HP LAPTOPS

  Follow all the instructions step by step and was hopeful this could work... but it didn't.

  Whereas really return to 8.1 windows because it's so frustrating using a mouse on the go.

  Please please can someone help me?

  You are the very welcome.

  The only other suggestion I can offer would be to uninstall the touchpad driver and software in the menu programs in Control Panel, restart and try this driver synaptics, even once, I posted.

  Or try the driver directly from synaptics.

  Always uninstall the previous synaptics driver before installing the new.

  http://www.Synaptics.com/en/drivers.php

• I've updated my full subscription, but can not use Ps or have. Help, please!

  I've updated my full subscription, but when I try to open Ps o have Adobe Application Manager opens and load always waiting for validation... I need to use emergency programmes. Should I try to uninstall the application of CC?

  Has been installed and working before the update? Do you get any error messages?

  Mac or PC? What operating system?

  You use creative cloud to install or update?

  See also:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

  FAQ: How do I update Creative Cloud Apps?

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

• Replaced fried DLink router with Cisco Valet wireless, internet connection OK but can not print on Canon MX860 printer?

  As in the title, power storm seems to have fried the step-down transformer and router DLink.  Replaced this morning and only took a few minutes to operate wireless router Cisco Valet for wire hard PC and wireless laptops.

  However, it seems that my Canon MX860 printer is not found by the network.  It can be located by control panel of Windows Vista and I have uninstalled and reinstalled twice.  But when I try to print I get the error message "printer not found."

  Help.

  Hello

  If this is a network printer ready to reconfigure the printer to match the new router.

  If it resets in a different IP, you need to set the printer to the computer for the game too (see the manual of the printer).

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• keep getting dial ras in windows it can not conect wireless how to fix

  Keep ras dial in windows this on my netbook can not conect wireless how to fix or there at - there no virus program to do a scan of all the programs I checked is not compatible win this

  Hello

  I suggest you to see link below and check if it helps.

  http://support.Microsoft.com/kb/159360

  Hope this information is useful.

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• 6510B211a wireless stopped working suddenly and can not get it back

  One day my hp printer works fine the next just stopped can't get it back tried to uninstall and reinstall doesn't and still no luck. computer has it under devices with a green check mark, States printer wireless connected to full power. When I go to print printer disappears and green check mark States not connected. Tablets and the laptop can not find or the other. The results of the tests of all good wireless network? Help please.

  Sorry you had a problem with the printer does not print.

  Try to perform a hard reset on the printer. Unplug the power cord at the back. Leave for 30 seconds and plug it back.

  In addition, run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03286146

  Let me know what happens.

• Windows 7 recognizes a wireless network; trying to connect but can not

  My laptop with Windows 7 detect my home wifi network. I typed in the access code and my computer attempted to connect with him, but it still fails. I ran the store and followed all the steps, he gave me. I unplugged unit, waited 10 seconds, plugged it back in, and represented the resolution of problems, and it came with the message "Windows cannot solve your problem of wireless connectivity."

  How can I fix it? If necessary, I can provide more information in the troubleshooting report.

  Hi Mellodramatikk,

  -You receive an error message after you type in the access code?

  You can try to start your computer in safe mode with network and check if you can connect to the wireless network.

  . To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode:http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Also, check if you have any third party security installed on your computer and try to temporarily disable the security software of the computer and try to connect to the wireless network. If you are able to connect to the wireless network after you disable the security software, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Post back with the above information and let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Wireless J6480 prints fine, but does not scan

  All J6480 printer a HP. It was connected to a desktop HP running Windows XP with a USB cable and printed and scanned OK. Computer for office is dead and has been replaced by a Samsung Windows 7 laptop so the XP installation CD does not work. A printer connected to the laptop and it prints fine wireless but does not scan.

  1 downloaded the HP website OJJ6400_Full_13 and I tried to add an another J6480 but he says that there is already one installed in a wireless port. I didn't go ahead because the printer does not print not good. Should I continue with the installation?

  2 Ran HPSDU.exe diagnostic tool and it said ojj6400 USB HP Officejet J6400 is the only installed printer.

  3 HP Digital Imaging Moniter displays the HP Officejet Series_TMP000 disconnectedstatus.

  4 start-all programs-HP shows only HP Smart Web Printing and Officejet J6400 Series. There is no HP solutions Center.

  Thanks for any help

  I uninstalled the J4680 printer and all HP programs associate. Start - all programs showed no HP at all. I installed the full version of HP J4680 programs and everything works fine. The wireless connection was automatically created during the installation and the scan works very well.

  Thank you for ME

• I have a wireless HP printer which I can not complete the installation because I get an error message ' USB 2. OWLAN Code 28 driver for this device is not installed

  I uninstalled and reinstalled the CD for installation on a HPJ610 wireless printer.  I still can't print.  All I get is the error message above? Then I try to find it and it tells me that it is not installed?  What should I do now?  Does anyone know.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
   
  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Photosmart premium all in a defiler of c309a wireless radio is on, but will not recognize network

  Using a laptop computer Dell windows 7 with my printer and it works well. All of a sudden, my wireless to the printer indicator is on, but I can not get the printer to recognize the network at all, and obviously can not print from my wireless laptop. Works very well by USB.  I ran all the diagnostic tools on the site of hp, nothing helps... The printer is only 18 months - old do not throw out just for that! Any ideas how to solve this problem? I have reset the router, hard to reset the printer and followed all the steps of the Diagnostics. I'm puzzled!

  I feel like a real dope. But this correction is so simple and cost nothing. You need not map the c309A wireless. What I did, is running a network cable to the back of the printer to my router (one of taking four behind) which automatically added the printer to my home network. So all I had to do after is go to the "Add a printer" Wizard on my computer laptop windows 7, let the wizard find the printer, which she did, and it works very well, from anywhere in the House. I don't know why I didn't think this earlier.  I'm not an expert, just do a lot of trial and error and I usually understand. I woke up in the middle of the night and thought of this. Feel really stupid! But what surprises me, why the guy from HP offers this? What is with that?  (by the way, I found the part, but they wanted bucks 48.00 plus 12 for shipping.) What a scam! That's not your job, it's Mr. HP guy?

  WOOHOO!

• Wireless mouse is installed, but does not?

  Wireless is new to me!  Implement USB & mouse shows like device, but does not?

  Hi Mollieb,

  Welcome to the Microsoft Answers site!

  Who is the manufacturer of the wireless mouse?

  Your wireless mouse does not work in Windows, or that your PC is in the early phase of the startup procedure when you turn on your PC?

  If in Windows, you might have to check batteries and polarity, corresponds to the mouse and the receiver to the other, also install the drivers from the manufacturers website or try to use the DVD that came with the mouse.

  If you use a USB of Microsoft mouse, you can follow the article below.

  The Microsoft wireless keyboard or mouse does not work as expected or respond intermittently

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP ENVY 15-j011dx Notebook PC - wireless issue

  HP ENVY 15-j011dx laptop - wireless worked well with installed Windows 8 out of box. During the upgrade to Windows 8.1 does not connect 95% of the time - and this load slow super pages. He needs a driver for 8.1? Not available on hp as of 03/12/2013. Help

  OK, the first thing I did was download the Realtek RTL8188ee driver from Realtek - installed this and had little or no improvement to my delima Wi - Fi. then a Windows Update for Realtek driver - that helped a bit. So this problem of material point im thinking, sick of conjecture 45 minute walk to Best Buy and see what they can do... so after an hour, I got to thinking - maybe ill just pop the lid above the bottom of the laptop and see if the wireless card seems ok (done this before on other laptops)... and... Guess what I found - the black antenna was not loaded on the Cup on the map, he was just hanging out, so broken that bad boy on and now the big wireless work as it should. So this post is SOLVED.

• My laptop is connected to a Modem wireless with full signal but the modem is having "of connectivity issues.

  I tried the usual unplug the Modem and rebooting. However, all other computers in the House are connected to the same modem and all is well and they are connecting to the internet with no problems. Solutions?

  Thanks, looking a bit around and found that many people had the same problem due to an update to McAfee four days ago. So I restored just the laptop to before this date, and the back, everything works well.