Replaced the motherboard on XPS 8500, now no visible display?

Similar Questions

• Replace the processor in XPS 8500

  Can I replace the processor of my XPS 8500 with an XPS 8700 processor?

  Do I need to use the thermal grease if I can replace it?

  Hello Joediver13,

  Class taken processor supported by 8700 and 8500 is different, so don't suggest you to Exchange.

  Here is the table with the comparison of the processors that are tested to work properly on 8700 and 8500.

  

  If there are questions more respond to this message, we will be happy to help you.

  Have a good day to come,

  Sincere greetings,

• I built a computer and just replaced my motherboard and CPU and now I am asked to buy a new product key for Windows Vista.

  I built my computer 4 years ago, I just rebuilt by replacing the motherboard and processor and now after starting my PC that I am invited to buy a new product key, one I had when I bought windows is already associated with another installation, Yes this installation, it is always on the same hard drive just a new motherboard and processor

  original title: why I have to buy a new product key

  1) click on the Start button

  2) type: slui.exe 4 and press the Enter key

  3) select your location from the menu drop-down and click on the next button

  4) the next screen provides the number to call to Activate by phone

• Want to 800-060: reactivation after replacing the motherboard

  I bought a HP Envy 800-060 with Windows 8 pre - install Amazon in July of 2013. It was an incredible computer since that time, and when the free update of Windows 8 for Windows 10, I did immediately released. Recently, however, the motherboard has failed on the computer. It would not stay same POSITION, and after much troubleshooting, I finally decided to replace the motherboard. Now that the computer is running again, I guess that the motherboard change was sufficient for the operating system to think that it is no longer enabled. I was never provided with a key of Activation of OS (Win8 has been pre-installed), and Microsoft has suggested that I contact HP to find the original key. I've looked everywhere on the chassis and inside the tower for a valid Windows activation key, nothing helps. I tried to find a phone number to call for support, but my product is outside the guarantee. I don't need advice or troubleshooting tips (so I don't pay the $59.99), all I need is my activation key valid Windows based on my serial number of the product. Anyone know the best way to achieve HP with this problem and have it is resolved?

  Thanks in advance!

  JC

  jcontino889

  The unfortunate, is that your original product key has been incorporated in the firmware original by HP motherboard UEFI when the PC was built.  There is no way to recover this key now.

  HP retains no record of keys to individualized product corresponding to individual computers, so they won't be able to provide you with the original key - and they are under no obligation to provide you with a SECOND key, that you didn't do the replacement of HP hardware.

  With the product now being out of warranty, it's really call HP or not you upload support - and the experience I have had with older equipment-, they do that, there's just no way around IDs.

  HP customer support is really the only way you have to get support.  If they don't help you for free, because your PC is out of warranty, there is nothing we can do about it on this forum.

• Replacing the motherboard on the Satellite L750 - 16 X

  Hello

  I am trying to replace the motherboard on a L750-16 X. I think that I need this A000080670 card, which is available. Under the RAM slots the sticker says A0000806709B141422W. I'm not sure of what the average figures and additional letters and I was wondering if anyone knew if it is compatible.

  Thank you very much

  Unfortunately, it is not easy to help you with this. As you probably know it's user forum for this kind of info is not easy to find.
  I don't know where you want to get the new motherboard, but if you want to buy it by some authorized service they should now what they offer.

  I don't know if anyone here has the same machine and can help you with this. What you can try is to contact the nearest Toshiba service provider in your country and ask for help.

• a610n - fan error of the system after replacing the motherboard

  Hi all

  I just replaced the motherboard on my system (phone http://h30434.www3.hp.com/t5/Desktop-Hardware/M2N68-LA-Narra-2-Replacement/td-p/3711774) and now I get this error when starting: Fan failure system, PC service to avoid any damage. I thought it was the CPU fan but he was running and after some research, I realized that he could talk a case fan.

  As a side note, the motherboard, I had was a little different and missing 2 connections that seem to be the front mic/headphone and USB ports.

  Now, the case's fan then what really is the problem? Any ideas anyone?

  Thank you

  -Panos

  The rev3.02 of M2N68 - THE Committee a case fan rear 3 poles. See here.

  The CPU fan is a 4 pin cable and attaches to the appropriate header to 4 pins on the motherboard. See the representative schema above.

  As for you, another question, the front USB port attaches to a USB connector on the card.

• Can I replace the motherboard on w510 with

  Hello

  Can I replace motherboard 63Y1495 with 63Y1540 or 63Y1542. It is a w510.

  Recantly, I bought an old w510. The portable freezer randomly and never recoveres. It has been repaired for this before and worked fine for a while. There is no problem, but the motherboard video

  What is your advice? Can I replace the motherboard? Is it a long way? Or is it better to find another laptop?

  According to my notes, 63y1545 is a T510 Board with integrated graphics (Intel). The other 2 boards are W510 boards. They are all the same size and shape, but W510 boards have 4 memory slots and use a different cooling fan. The W510 is a nice machine and worth it if you can get a good price on a Board and fan of fixing. Basic coverage is also different machines 'W', but I don't know if it's important or one you have now.

• How to re-enable Windows 7 after replacing the motherboard.

  I managed to replace the motherboard in an Acer Aspire v3 and all is well (or almost).

  Only problem is that Windows 7 requires now that I'm using an illegal copy of Windows.

  I know that the reason is that the version of Windows OEM is selected with the original motherboard.

  I talked to both supports of Microsoft and Acer support several times but neither can or reactivates my windows. Is it really to do I have to pay for a new product key as a consequence of a repair?

  Hello

  That said, that the next question is if I can solve the problem by buying a new product key?

  Yes, look at this response from Microsoft.

• Windows will not start after replacing the motherboard

  To begin, I must say that I am pretty clueless when it comes to computer skills.

  To summarize, I sent my CPU to a repair shop when my computer has stopped working. I removed my hard drive before starting the repairs because it contains confidential data.  They have narrowed the cause to a faulty motherboard and replaced by a new dissimilar.
  At the store, the guy had a vista 64 bit recovery disc so I have it home and tried to fix it. He said it will be a breeze and relatively bug free. As part of the Startup Repair, I tried to drive the Startup Repair, and tests were all successful except one. An error of diagnosis readings

  "Unspecified system configuration changes may have caused the problem.

  Repair action: repair and checking the integrity of system files

  Result: failed. Error code 0 x 490

  time taken = 720023 ms

  Everything I've done has led to a brief blue screen to the Windows loading screen and then it restarts itself.

  I also tried to restore to the previous two points, but it has also led to the square - a brief blue screen after the loading screen and restarts on its own windows. I'm not ready to reinstall vista and I can't afford to do it too, because I don't have enough disk space to perform another installation. Nor am I willing to reformat one of my two disks.

  If you need additional information on the specifications of the material that must be provided, ask me.

  IM at my end intelligence now, and I really hope to solve this problem.
  Thank you.
  Bryan M

  Hello

  I'm sorry, but you have to completely reinstall the operating system after replacing the motherboard with a different motherboard.

  "Startup Repair" is exactly that: a start NOT a repair system repairs

  What has happened, it is the operating system on your hard disk contains the drivers for the old motherboard and does not and you can't change drivers in doing what you do.

  The only way to solve this problem is to reinstall Vista.

  You wipe the hard drive and restart and make sure that the repair shop gave you the disc to install the new drivers of motherboard after you reinstall vista or download on the website of the manufacturer of the motherboard.

  And here a question for you to consider, too.

  If you bought a copy of Vista retail yourself, you can use the method above to a new installation and then install the new disk motherboard drivers.

  But, if your computer is a trademark of purchased manufacturer, HP, Toshiba, etc., you can not change the motherboard that the license of Vista OEM is stuck at motherboard the origin of the manufacturer that it has been installed on and now you canceled your Vista license.

  See you soon.

• Replace the motherboard only Windows 7

  My tale of woe: my wife and I love to play Poker Online and communicate with our children and grandchildren by e-mail and Skype.  However, it seems that because we bought a laptop Compaq CQ61 cheap Gray online auctions, we are now in a bit of a pickle.  We bought the laptop used with 12 months warranty from factory and it lasted 18 months only, in other words just out of warranty.  The laptop wouldn't turn on one morning and had a horrible smell of burning plastic, I myself am immediately turned it off.  Be retired we could not afford a new laptop, so I decided to have a look for me to see if I could do something.

  After a few hours of disassembly of the laptop, I discovered that there was an area on the motherboard that has been burned to a crisp.  Being somewhat handy I looked on ebay and to my surprise, I found an exact match for the motherboard to $160. Do not think of any other possible consequences, I ordered the M/B as the cheapest option.  About a week later the renovated Intel M/B happened and I went to transfer the old M/B to the new items.

  About a day later I pressed the button ON and to my amazement, he lit in windows 7.  This is where my problems started.  After a few starts, it displays all of a sudden in the bottom right of the screen:

  Windows 7
  Build 7601
  This copy of windows is not genuine

  As well as this occasionally at the start, he appears with the message saying "this copy of Windows is not genuine" and shows a screen trying to find a solution.

  I called the center of Activation Microsoft phone and told me that this copy of windows is linked to the M/B.  The M/B is the only bit that I replaced.  It has the same processor and the heat sink, has the same fan, he has the same drive, the same same chip memory 2 GB, it has the same wireless card but because the motherboard has been changed, now it's different.

  This sound like the old problem of axe. The handle has been changed seven times and the head was changed three times, but I know it's the same axe because I cut down a tree with her and it's the only one I have.

  The Microsoft representative said that if I had a windows recovery disk, he might have able to help me, but the only disc that was given to me with the laptop was a cardboard cut-out, explaining how to do a restore of Windows 7 and make a recovery disk.  He also said that I could simply ignore the message.

  The only other problems I have is that my HDD ATA internal and my CD/DVD drive now appear in devices and printers
  and as an icon to remove the device safely on my taskbar.  Research on the forum, this could be a problem of drivers.
  The only number on my laptop is Presario CQ61 on the front and Serial No. CNF9122FQP and a product no. NT350EA #ABU on the back on the tile and the lower part of the HP Support Assistant.  None of these numbers present on the HP site.

  Does anyone know what are my options, can I get a CD of windows 7 HP recovery, if so how? If I do get one then I'll be able to re-activare my copy of Windows 7.  If it sparkles on my only options would be to load a legitimate copy of Windows 2000 that I have or load Ubuntu 11.04, advice?

  Kenshep

  This produced many leads here:

  http://h10025.www1.HP.com/ewfrf/WC/product?product=3927381&CC=US&DLC=en&LC=en&Query=NT350EA&Tool=

  HP recovery disks will not work on a motherboard not original. Ubuntu may be your best choice if you can not afford the retail of Windows 7.

• Problems after replacing the motherboard

  I had my motherborad replace and drive hard and now still wmi repeated problems startup problems and disk problems
  now computer freezes up on me I think I will close it
   
  Please you delte this message because you seem to move my posts elsewhere anyway, and have not responded to me
   
  Pleae respond as soon as possible I think THAT MY COMPUTER IS GOING to BLOW UP
  ERROR 8004005 0XC00000D 0X000000 0 X 79
  REPEATED WMI ERRORS AND OTHER MISTAKES TO THE COUNTY PLEASE WRITE ME AS SOON AS POSSIBLE
   
  I could not download the file, I hit copy and got many files, but it wouldn't let me download the file do - what I do?
  now, o took two blue screens and several error what should I do. error fatal 0xfffbf8 error ox0000020 essent and 24 and error 0 x 79
  I had shut downs and crashing and placing of time then going on.?

  Hello

  "I had my motherborad replace and drive hard and now still wmi repeated problems startup problems, and disc problems.

   

  You don't say who 'fixed' to your computer.

  If it was Dell, which is in contact with you soon, get them to repair it properly, or if it was someone else that Dell, take it back to the person who has replaced the motherboard and hard drive and get them to repair it properly.,.

  See you soon.

• I have a license key for windows 7 Home premium 64-bit. I recently had to replace the motherboard. How can I get a replacement operating system?

  I have a license key for windows 7 home premium 64-bit on a renovated Gateway PC I bought.

  I recently had to replace the motherboard and now have to reinstall the operating system.
  How can I get a replacement operating system? All I see is where I have to pay to download another.
  Thank you

  Download the Windows 7 ISO Image
  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• I have progaram after I replaced the motherboard on ipod classic 7th generation?

  I need to reprogram after that I replace the motherboard on ipod genderation 7?

  If hard drive iPod is not deleted and the previous content, does not.  However, you can do a restore of the iPod using iTunes, to give him a fresh start.  This erases the iPod, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Have you ever done work (to replace logic card), or you're going to do?  If you have not yet done the work, which is the real problem that needs to be replaced the iPod logic board?

• Qosmio F10: RAM upgrade issue after replacing the motherboard

  In 2006, when my F10 - 128 fell down as a fault of the video card, Toshiba has replaced the motherboard (865 PM) of my F10 by a new one with the video card installed in Go 6600.
  When I came back, I noticed that the same RAM modules have been installed (2 x 512 MB DDR 333 Mhz) as I previous had on the old motherboard.

  Then, I assumed that I could easily upgrade to DDR2 RAM, I realized that this type of RAM supported by the new motherboard installed (915 PM?). But the modules DDR2 Ram (Kingston 1 GB SODIMM (KVR533D2S4 - 1 G) 533 MHz) that I ordered is simply not in the storage media... The notch in the module is placed differently that the modules of RAM DDR.

  If the jury has been replaced by a newer version, with the video card Go 6600 (PCIexpress), how is, I have a Council that can not support DDR2?

  Here, I am really confused. Someone at - it advice please?

  > If the jury has been replaced by a newer version, with the video card Go 6600 (PCIexpress), how is, I have a Council that can not support DDR2?
  I think the jury is still supported DDR2 memory modules, but the allocation of the memory pins could be different.

  You should contact the ASP in your country and ask for the compatible modules.