Replacement of motherboard problem

Similar Questions

• Problems after replacing the motherboard

  I had my motherborad replace and drive hard and now still wmi repeated problems startup problems and disk problems
  now computer freezes up on me I think I will close it
   
  Please you delte this message because you seem to move my posts elsewhere anyway, and have not responded to me
   
  Pleae respond as soon as possible I think THAT MY COMPUTER IS GOING to BLOW UP
  ERROR 8004005 0XC00000D 0X000000 0 X 79
  REPEATED WMI ERRORS AND OTHER MISTAKES TO THE COUNTY PLEASE WRITE ME AS SOON AS POSSIBLE
   
  I could not download the file, I hit copy and got many files, but it wouldn't let me download the file do - what I do?
  now, o took two blue screens and several error what should I do. error fatal 0xfffbf8 error ox0000020 essent and 24 and error 0 x 79
  I had shut downs and crashing and placing of time then going on.?

  Hello

  "I had my motherborad replace and drive hard and now still wmi repeated problems startup problems, and disc problems.

   

  You don't say who 'fixed' to your computer.

  If it was Dell, which is in contact with you soon, get them to repair it properly, or if it was someone else that Dell, take it back to the person who has replaced the motherboard and hard drive and get them to repair it properly.,.

  See you soon.

• I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Two points:

  1. it is unlikely that your current installation would work if
  you have changed motherboards. You need to reinstall itself.

  2 but you cannot use your current copy of Windows if you change
  motherboards, not even if reinstall you it cleanly. The largest
  disadvantage of an OEM version, is that its license it binds permanently
  the first computer, it is installed on and Microsoft believes that
  If you change the motherboards, another computer. It can never
  legally be moved to another computer, sold or transferred (except with)
  the original computer). If the computer dies or is stolen, your
  license dies with him.

  Ken Blake, Microsoft MVP

• Want to 800-060: reactivation after replacing the motherboard

  I bought a HP Envy 800-060 with Windows 8 pre - install Amazon in July of 2013. It was an incredible computer since that time, and when the free update of Windows 8 for Windows 10, I did immediately released. Recently, however, the motherboard has failed on the computer. It would not stay same POSITION, and after much troubleshooting, I finally decided to replace the motherboard. Now that the computer is running again, I guess that the motherboard change was sufficient for the operating system to think that it is no longer enabled. I was never provided with a key of Activation of OS (Win8 has been pre-installed), and Microsoft has suggested that I contact HP to find the original key. I've looked everywhere on the chassis and inside the tower for a valid Windows activation key, nothing helps. I tried to find a phone number to call for support, but my product is outside the guarantee. I don't need advice or troubleshooting tips (so I don't pay the $59.99), all I need is my activation key valid Windows based on my serial number of the product. Anyone know the best way to achieve HP with this problem and have it is resolved?

  Thanks in advance!

  JC

  jcontino889

  The unfortunate, is that your original product key has been incorporated in the firmware original by HP motherboard UEFI when the PC was built.  There is no way to recover this key now.

  HP retains no record of keys to individualized product corresponding to individual computers, so they won't be able to provide you with the original key - and they are under no obligation to provide you with a SECOND key, that you didn't do the replacement of HP hardware.

  With the product now being out of warranty, it's really call HP or not you upload support - and the experience I have had with older equipment-, they do that, there's just no way around IDs.

  HP customer support is really the only way you have to get support.  If they don't help you for free, because your PC is out of warranty, there is nothing we can do about it on this forum.

• a610n - fan error of the system after replacing the motherboard

  Hi all

  I just replaced the motherboard on my system (phone http://h30434.www3.hp.com/t5/Desktop-Hardware/M2N68-LA-Narra-2-Replacement/td-p/3711774) and now I get this error when starting: Fan failure system, PC service to avoid any damage. I thought it was the CPU fan but he was running and after some research, I realized that he could talk a case fan.

  As a side note, the motherboard, I had was a little different and missing 2 connections that seem to be the front mic/headphone and USB ports.

  Now, the case's fan then what really is the problem? Any ideas anyone?

  Thank you

  -Panos

  The rev3.02 of M2N68 - THE Committee a case fan rear 3 poles. See here.

  The CPU fan is a 4 pin cable and attaches to the appropriate header to 4 pins on the motherboard. See the representative schema above.

  As for you, another question, the front USB port attaches to a USB connector on the card.

• I have progaram after I replaced the motherboard on ipod classic 7th generation?

  I need to reprogram after that I replace the motherboard on ipod genderation 7?

  If hard drive iPod is not deleted and the previous content, does not.  However, you can do a restore of the iPod using iTunes, to give him a fresh start.  This erases the iPod, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Have you ever done work (to replace logic card), or you're going to do?  If you have not yet done the work, which is the real problem that needs to be replaced the iPod logic board?

• Qosmio F10 recover after replacing the motherboard

  Hello

  I'm having a problem with my Qosmio F10 recovery. It won't boot from the CD, I get a message "media test check the cable failure".
  I tried everything I could find here on this issue without any results. Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is excatly the case.

  I got a new motherboard and CD/DVD player put some time ago.
  How can I make it work again?

  A.

  > Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is exactly the case.

  Who replaced the motherboard? THE ASP?

  Well, usually the recovery CD should work after the replacement of the motherboard.
  I presume that the parts have been replaced with exactly the same parts and so it should t be a conflict between the recovery and the new motherboard CD.

  Have you tried to boot from another bootable Win XP or Linux CD? Check it!

• Satellite A300-23F motherboard problem

  Hello!

  I have a Toshiba A300-23F that last week, refuses to turn on.
  The power turned on but when I press the power button it does not illuminate.
  As my warranty has expired, I gave him a technician to find out what the problem is and he informed me that the graphics chip is damaged but so the whole motherboard must be replaced.
  The possibility to give Toshiba to replace my motherboard is not an option, of course, because they require 300-400 for it. I bought the laptop 1000, 2.5 years so it is obvously out of the question.

  However, my problem is that I can't find any card handed to nine or such parent on ebay or other shops. Any suggestions on that?

  Do you think I have all the options to the left or should I go and take a hammer and release my anger on this high level sourrealistic joke manyfactured from Toshiba.

  > However, my problem is that I can't find any card handed to nine or such parent on ebay or other shops. Any suggestions on that?

  You must use a motherboard that specially left for Satellite Pro / Satellite A300 series.
  The new motherboard is really an expensive part. Perhaps you could get a second hand A300 with a card mother work and then you get good mobo.

  But its your own decision, I got a laptop from another manufacturer who died after 3 years of use.
  It was obviously a malfunctioning motherboard :(
  I tried to solve this problem because of the price of the motherboard I sold the laptop died and bought a new

• Replace a motherboard T430

  Hello. I replaced the motherboard of my code with the last HM 00 303 04Y1406 FRU T430.
  Everything ok, works perfectly, but I can't change the number stored in the type of machine "qqqq? with my 2351
  With Lenovo disk maintenance, I entered all the data and the type of series, but with system update can not download drivers because the machine type is not recognized.
  Is there another program to update the type of machine?

  Well, since nobody has been able to help and in the Italian proverb says "who acts as if she for 3 ', convinced that, sooner or later, I found the solution, I was crying, I SOLVED THE PROBLEM.
  I brought my PC to the Service for 3 days and I contacted a second technician I solved the problem because there was for both the motherboard to replace!
  Start by saying that the EEPROM stores a string and are ready to be crushed. No question. And there is not a good, to remove it and then rewrite it.
  It is therefore for the type of machine.
  During the update of the BIOS, at some point the program asks if you want to update the Bios or machine type.
  With the second option, when you see the number dialed by the first 4 characters blackened (not to be seized), in the box on the side, or who typed in, press the space bar to clear the contents.
  Proceed to the upgrade of the series and follow the instructions on the screen.
  During the restart, again, choose "update series", and in this way, you will see the type of car that you previously entered in the bios.
  Renewed the usual 3 alphanumeric characters and follow what you are responsible for the video. Once this bios to remove the update of phase CD and reboot the PC.
  LENOVO CENTER's SOLUTIONS will appear in the type of machine and here for warranty registration information and at this point it will work also program update drivers.
  Said today is simple, but there are technicians of Lenovo is arrived!
  That I can be useful.

• I want to replace my motherboard

  model No.-pavillion g6 1301 tx. SERIAL No.-[number of Series edited by Moderator] PRODUCT No.-A3V677PA. The problem is the usb port does not work on the left side of the right speaker laptop.its is not working.so I want to know if I will replace his motherboard it how much cost should pay more...

  Here is the Service Manual:

  Manual

  It's your motherboard:

  636375 001

  HP has the Commission for the exchange of $154:

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=509B1EC8D8CA4241B2E8756CA1E5A2D4&SearchIn=PartNumber&SearchPN=636375-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY 17-3290NR: wrong information after replacing the motherboard

  Hello
  I have a problem after replacing my motherboard because the old stop working
  I had a new HP spare parts for my HP ENVY 17-3290NR after installation I realized that in hp say assistance:
  HP pavilion dm3 instead of hp envy, series and product number say 123456789
  so I can't use my drive recovery or the app by default because I've read that I must retatoo the motherboard, but hp do not provide me with dmifit or something similar, then what can do? I call the tech support of hp and they just told me to go back to that motherboard despite the part is correct, he's simply wrong information
  
  so, how can I change the information on the bios?
  
  

  I retattooed my motherboard using dmifit and now everything works fine

• Compaq CQ58: Replacement of motherboard.

  Salvation;  I have a problem with my laptop Compaq CQ58: I had to replace the motherboard and the one I bought work very well only that I went to HP for the drivers and installed the detect my laptop and it says I have a clubhouse DM3. What was wrong, could someone please indicate the product number is 1234567 #ABA. Thank you

  Thanks for your quick response; I will contact HP.

• Can I replace the motherboard on w510 with

  Hello

  Can I replace motherboard 63Y1495 with 63Y1540 or 63Y1542. It is a w510.

  Recantly, I bought an old w510. The portable freezer randomly and never recoveres. It has been repaired for this before and worked fine for a while. There is no problem, but the motherboard video

  What is your advice? Can I replace the motherboard? Is it a long way? Or is it better to find another laptop?

  According to my notes, 63y1545 is a T510 Board with integrated graphics (Intel). The other 2 boards are W510 boards. They are all the same size and shape, but W510 boards have 4 memory slots and use a different cooling fan. The W510 is a nice machine and worth it if you can get a good price on a Board and fan of fixing. Basic coverage is also different machines 'W', but I don't know if it's important or one you have now.

• How to re-enable Windows 7 after replacing the motherboard.

  I managed to replace the motherboard in an Acer Aspire v3 and all is well (or almost).

  Only problem is that Windows 7 requires now that I'm using an illegal copy of Windows.

  I know that the reason is that the version of Windows OEM is selected with the original motherboard.

  I talked to both supports of Microsoft and Acer support several times but neither can or reactivates my windows. Is it really to do I have to pay for a new product key as a consequence of a repair?

  Hello

  That said, that the next question is if I can solve the problem by buying a new product key?

  Yes, look at this response from Microsoft.

• Had to replace the motherboard: System does not boot, the XP installation disc runs to a failure.

  Thus, the motherboard in my PC started to die.  I replaced it.  Start-up of the new system has prompted a Safe Mode boot.  Choose Safe Mode, the system restarts after mup.sys.  Choose the last known good startup the initial windows screen appears briefly, then restart the system.  Boot from the original installation disk, all kinds of drivers charge then the last message that appears is loading Windows Executive.  A
  BSOD appears stating something to the effect of an error with the hard drive, verify the presence of virus, remove the new hard disks, etc..  Hard drives is a virus.  So, how do you round a re - install defective and/or repair or a defective Mode start safe mode with new material?

  Thank you

  Hello

  Since you have replaced the motherboard, you may need to reinstall the operating system.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]