Replacement of the external antenna

Similar Questions

• The external antenna (antenna gain value dB) Configuration option

  Hello

  Anyone of you can clear a doubt about what antenna gain dB the value (for the configuration of the external antenna)
  I have set in the field where the beach is so (-128 to 128) I have a 1242 AP, I use an antenna 1728 (5.2 dBi)

  and I would have the maximun WORSE.

  Kind regards

  The gain setting it will not change your WORST.  If you have a WLSE, which serves for information purposes.  So to get the most out of your installation, you would set your TX power to 100mW (20dBm).  Maximum E.I.R.P. is your TX in dBm, more your gain of the antenna less connectors, cables and or lightning protection.

• Satellite M50: How change it to fix the external antenna for WLan card

  I want to change my M50, so I can join the onboard wireless card external antenna.

  Anyone know of any modding guides?

  Hello

  What do you do exactly?
  What is name of your Satellite M50 - xxx?

  Usually if the notebook is Wlan ready but there is no Wlan installed if it is possible to use a minPCI wireless network card.
  So if you want to install the Wlan card and attach it to the antenna, you must connect the cables.
  A white cable normally goes to the HAND and a black to the auxiliary voltage

• need help syncing replacement of the external hard drive for Lightroom

  Hello Lightroom community.

  I've exhausted my research and am now seeking help. Please direct me to this information in the forum if it exists. Also, I am a novice and while I am learning lightroom quickly with all my time spent in forums and online videos, I am limited in my understanding of how it all works.

  Problem: I store my Lightroom Catalog and backups on my portable MacBook Pro. I use two external hard drives to store all my images and store my time machine backups. My external hard drive (1-hand) and my external hard drive (2-Back-up) were also well synchronized with the catalog and recognized by lightroom when I edited the pictures. I mainly used the DHM 1-hand when I edited, especially when I went. Last month, my main 1 - EHD died and was unrecoverable. I got lucky that my backup drive (DHM 2-back-up) has always had the images and changes.

  In order to quickly save my 'JEP 2-back-up"to a new 'Hand' work external hard drive replacement, I dragged and dropped the backup disk images to the new"Main"drive so that I can sleep at night. This gave me the peace of mind that all of my images and backups time machine were now on two disks again. (Note: the new ' hand ' disk has a different name. ") Is this important?)

  How can I get Lightroom to recognize and sync with my new drive and photos? Is there a simple way to do this or do I have to restart the process from the beginning? If so, where should I start? I'm afraid to attempt without some advice/suggestions from the experts.

  Thank you for any information, you can pass it along! Please let me know what I can provide additional information.

  Side note: when I looked to import the images of the new 'Hand' DHM - although this would make duplicates-Lightroom recognized that there are duplicates. So, where is the missing link?

  If you can rename the new primary drive to match exactly the name of the previous main drive, that should correct the problem.

  If this is not the case, then you want to open your Lightroom Catalog and then reconnect the top-level folder that contains your pictures by right-clicking on this top-level folder and then to find Missing folder pointing Lightroom on the equivalent top level on your new drive main folder. The details are described here (see Figure 4): Adobe Lightroom - find folders and files moved or missing

  Side note: re-import never corrects this problem, it only makes it worse. Never use to reimport into solution in Lightroom.

• Pavilion a6700y: connection for external antenna

  I managed to disconnect the external antenna adapter cable wireless when cleaning the computer.

  It seems that there may be two possible locations to reconnect the wire (it looks like a big boost on the connector at the end of the antenna) to the adapter.

  Any information would be appreciated.

  Thank you!

  Hello:

  There's probably a hand and an outlet to the.

  Here is a picture of the map on your PC support page.

  Watch orientation and copy what you see here, would be the only suggestion I can offer, or closer to it and terminals can be labeled on the circuit board.

  With a single antenna, you want to connect to the main terminal.

  

• The Pavilion Elite HPE475 need an external antenna to a wireless connection?

  I just bought this machine and have had problems with a poor quality since the wireless signal. HP technical team came up with all sorts of different explanations, and I even had to send for the "repair" because one of them think that the wireless card was defective. The last time it's because he needs an antenna.

  Can someone confirm if this machine wireless card requires an antenna to be connected to the two screws Golden at the back of the computer? What is the answer, or just another diversion?

  I was not sent an antenna with the computer, it may be a mistake the part of HP. I can connect to the internet, but usually get that two bars on the signal, while my old computer has always had five bars, as do other computers on the network. The connection keeps dropping out and is extremely slow to load at times.

  Any help would be appreciated.

  Hello

  I suggest that you take a look at what came in the box.

  The low-profile wireless network card should have with an antenna and two cables with connectors from red and blue to differentiate the connection to the wireless card.

  The service center may be assuming that you already know that... All the wireless cards that come with desktop computers have a connected external antenna with cable to the wireless card.

  This image is an example. Some cards equipped with antennas that screw directly on the gold screws. Most 802.11 b/g/n card look like this.

  Please report anything that is on the label with bar code on the back of your PC, except the serial number. The HPE475 is not a complete description of a PC.

  Best regards
  ERICO

• Where can I find external antennas for the extreme UFO from the airport

  Where can I find an external antenna for my extreme model of the A1034 (UFO) airport?

  You can check with the support of Quickertek , since they used to provide an option for the A1034 AirPort Extreme antenna upgrade. Maybe they might have even a few shares left, even if the product is not on their current site.

  http://www.QuickerTek.com/

  If you have a Radio Shack or Fry near your House, take the AirPort Extreme to see if you can find an antenna with a connector that will come into contact with the connector on the AirPort Extreme. Any small, simple antenna will do, the trick is to find one with a connector that fits the AirPort Extreme.

• CAN I turn stop wireless to router but always send signals to an external antenna via the port?

  Can I stop/start of my Wired main WRT54G wireless and always send the signal through a WAP browser & directional external antenna plugged into the hub?

  How to allow only my own devices to use my bandwidth?

  Using WPA password on WRT hub.

  Drive Blu - Ray and AT & T Microcell Tower allow other titles-WPA2...?

  Can I block the antenna attached to the main hub of sought but allow the port to send signals at access point?

  Shields of aluminum foil over the main router antenna would cease its output signal? (if I remove them to allow the occasional portable navigation)

  If you want, you can disable the feature on your primary router WRT54G wireless and use WAP to send the wireless signal.

  Open the router configuration page and go to the Wireless tab, change the mode of network to people with reduced mobility. Save the settings.

  If your wireless network is secure only your wireless computer can connect to the wireless network and use the bandwidth. So, make sure your wireless network secure.

  Consult the manual for your Bluray and AT & T Tower and see if they take in charge WPA2.

• lost the external drive, catalogues on the correct main computer, I have the original files on cf card how to connect the news catalogue replaced images?

  Hey I lost an external hard drive with a lot of work on this subject, the catologs are on the main computer, in the image files... when I go on the external hard drive icon I get previews and selects so im assuming that this info is on the main computer... So I cf cards original for a lot of this stuff... is it possible to connect them so that I don't need to re - edit four years of stuff... I'm using a mac osx 10.9.5 his lightroom 5... any ideas?

  As I said earlier, you copy the files to the card from the camera to the new external drive with the HELP of YOUR OPERATING SYSTEM. This isn't an action of Lightroom. Files are in the same exact files than before on the old external hard drive.

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• How to put a hdr - az1 for automatic replacement of the SD card?

  I have a sony HDR - AZ1 action cam and use it as a dashcam. I want to replace automatically the oldest video recording when the SD card is full, but may not know how to do this. Currently the device stops automatically once the 32 GB, the card is full. I use the smartphone android Playmemories Mobile application to control the camera.

  Hi NomadS308,

  Welcome to the community of Sony!

  The camcorder is not the ability to overwrite old files stored on a memory card. When the card is full, you could delete the formatting of the card. I also suggest backing up files to an external device such as a computer before formatting.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Need for an external antenna for desktop - what to buy

  My mom just got a new HP desktop.  She lives next door to my sister who has/wireless router.  In the configuration of his computer, the photo shows an external antenna cable that plugs in the back of the tower.  However, in the store, they have a variety of USB things that sound like they do the same work.  His house is about 500 feet of my sisters.  What is the best, most economical solution.  Be precise because clearly I'm not tech savvy.

  I think you're at the limit of the standard Wi - Fi if you want to connect to a PC that is inside a House to a wireless router that is in another House of 500 feet away.

  If there is a line-of-view between the two houses, then you can consider adding a pair of outdoor access points.  I have a set of an older version of these products, and they work very well for me:

  http://Meraki.com/products_services/hardware/outdoor/

  Best regards / Jim B

• Shaking image on the external monitor when the Satellite A200 is running on AC

  Hello

  I have this problem that drives me crazy... I bought an external monitor for my laptop Toshiba Satellite A200-1 9 s, but the problem is that the image on the external monitor, shakes. I tried another monitor, the same, another cable, same problem; the only way to stop it is to unplug the AC of the laptop.

  I also tried to move the monitor further away from the laptop, but nothing.
  I can stop shaking so hard that if I switch to the profile AC from FULL POWER to save power... but even with this image is still shaking a little.

  So basically there is a magnetic field around here, probably in the portable, which makes my picture shaking like crazy... someone knows how to stop it?
  TX

  Hello

  Hmmm...
  I don't think it has to do something with magnetic fields.

  Cause she is related to the energy consumption of the computer, it seems that there is a problem with the AC adapter.
  If he needs to deliver all the 'juice', this is capacitors to keep absolutely stable voltage may be too low.
  These instabilities (with the frequency of 50 Hz supply) can parasitize the signal on the screen.

  A solution for this?... If you know how to solder some fat capacitors somehow between the two...

  Or:
  It is a grounding problem
  I have never heard of such problems with the LCD (VGA monitors?) monitors. Generally, this is the case when you use an analog video output,
  leading to no color on TV.
  You have an annoying hum when you connect the audio output to an amplifier? It would be a sign for it.
  I had such a problem and solved by plugging my laptop on the sector on another circuit in the House as my audio devices
  So experiment with it.
  First: unplug all the other stuff (printer, Poles, antennas, all) these are unpleasant problems with a lot of possible interference.

  Let me know!

  Welcomes Matz

• WiFi external antenna

  Is it possible to connect an antenna external wifi to my computer hp laptop dv5 1110ee.

  Thanks in advance

  Or, without having to speak Polish:

  Your wireless adapter is internal.

  In order to have an antenna that there must be something that you can connect to an antenna protruding.

  You can buy a new wireless card that fits your ExpressCard with an external antenna location.

  You can also cut a hole in the bottom of your laptop and attach a cable from the antenna of your wireless card and run it to an outdoor antenna.

  Or you could buy a USB adapter wireless with an antenna.

• Mid 2012 MacBook Pro starts only with the external hard drive

  I have a MacBook 2012 mid Pro and whenever I try to start it only shows the folder with question mark flashing. But, whenever I plug in my external hard drive, it boots. I also tried selecting the boot drive and the interns don't show, but once in the external plug-in, it shows externally as Macintosh HD. I also tried to reinstall OS X but it says I can't you this player.

  Thank you

  While in the drive external hard, that I hope has the same operating system, can you go to utilities utilities disk-file and run a repair of the internal drive and repair permissions? You could also do the same thing in starting mode of recovery-command keys R at startup. Using the recovery disk utilities. If you can't get the internal drive to show everyone, most likely the drive is bad. Then, you will need to replace it.