Replacement of the FCP iChat Theater for first CC

Similar Questions

• Choose between gtx970 and 780ti at the same price - especially for first pro (no game)

  I must choose between (new) gtx970 and 780ti (second hand a friend, he buyed it but never mounted or even he unboxed) specially for first pro / some aEffets and PShop (it's the working pc, no game... too )

  Both are at the same price-

  360 eur 970 gtx

  780ti gtx 355 euros

  Read the card (cudacores, bandwiths, etc.), it seems easy to choose the 780ti especially because this isn't for the games, but I'm not professional equipment, then maybe you could give me some advice... I'm edition 4 videos k short (10 minutes or more) almost future and im worried about the 'old' technology 780ti could have some limitation with it

  I like to work with my new baby - i7 5820 k - 32 GB ddr4 2400-128 GB ssd for the OS - ssd 256 GB for editing - 2 TB hdd 7200 RPM - and an old gt440 from nvidia... for now...

  I hope you can help me with this last choice

  Thank you very much in advance...

  A 980Ti would be the best choice, and around the same way as a black Titan on this basis.

  Eric

  ADK

• How to release the source code (only) for first level VI?

  Hello

  I develop an add-on for an application that I have. The demand is large (more than 1,500 VI) and the screws are set up to compile with for most of the default settings (there is a first level VI, some with visible front, most of them are not visible).

  The customer wants that source code for the work that I do, and he will use the many existing Subvi. The addon itself will be a Subvi (I have a Main.vi that basically opens 'front' and it is a new screen). The sub - VI existing basically make data collection and treatment, and the new code will perform additional processing and have a nice GUI for existing code. The customer wants the source so that they can make changes as needed.

  Is there an easy way to simply provide the source for the first level VI? Basically, I want to give them M.vi, where M.vi name n.vi, o.vi... etc, but o - z.vi should be non-free. In addition, M.vi is called by Main.vi, which opens A screens - M.vi

  One option is to copy the entire application, then open each sub - VI and save it without Source Code. But with so many files, this seems like a bad idea. So, I also maintain two applications.

  Good ideas out there? It seems if easy in other languages (using object files) it looks like there should be a solution here I don't see... Thank you!

  rnelsonee wrote:

  Ah! I completely forgot to Save with Options. It's been so long that I had to deal with this type of problem.

  OK, to ensure that:

  I opened my first level VI, saving Options with-> apply the password (or remove diagrams) and then give it to them. I also provide a normal backup of their VI, with source.

  I still about 100 screws which are called dynamically are not part of the VI treeand I would still have to re - register with a password, but it's better than every single VI. Thank you!

  Use the option duplicate hiarchy and preserve...

  apply to all...

  at least as far my memories are good.

  Ben

• Need advice on the purchase of laptop for first Pro CC

  Hello, I have a small budget less $1 099,00 I want to make sure that I buy a laptop that meets the requirements of the system (in particular

  AMD and NVIDIA graphics for the GPU acceleration cards).

  Please check the link and help me to choose the cheapest computer laptop less $ 1 099,00 which runs the first Pro CC with success. Click on the link bit.ly/1WeFdD7

  Please visit: https://helpx.adobe.com/premiere-pro/system-requirements.html

  I hope this helps.

  Concerning

  Megha Rawat

• need help syncing replacement of the external hard drive for Lightroom

  Hello Lightroom community.

  I've exhausted my research and am now seeking help. Please direct me to this information in the forum if it exists. Also, I am a novice and while I am learning lightroom quickly with all my time spent in forums and online videos, I am limited in my understanding of how it all works.

  Problem: I store my Lightroom Catalog and backups on my portable MacBook Pro. I use two external hard drives to store all my images and store my time machine backups. My external hard drive (1-hand) and my external hard drive (2-Back-up) were also well synchronized with the catalog and recognized by lightroom when I edited the pictures. I mainly used the DHM 1-hand when I edited, especially when I went. Last month, my main 1 - EHD died and was unrecoverable. I got lucky that my backup drive (DHM 2-back-up) has always had the images and changes.

  In order to quickly save my 'JEP 2-back-up"to a new 'Hand' work external hard drive replacement, I dragged and dropped the backup disk images to the new"Main"drive so that I can sleep at night. This gave me the peace of mind that all of my images and backups time machine were now on two disks again. (Note: the new ' hand ' disk has a different name. ") Is this important?)

  How can I get Lightroom to recognize and sync with my new drive and photos? Is there a simple way to do this or do I have to restart the process from the beginning? If so, where should I start? I'm afraid to attempt without some advice/suggestions from the experts.

  Thank you for any information, you can pass it along! Please let me know what I can provide additional information.

  Side note: when I looked to import the images of the new 'Hand' DHM - although this would make duplicates-Lightroom recognized that there are duplicates. So, where is the missing link?

  If you can rename the new primary drive to match exactly the name of the previous main drive, that should correct the problem.

  If this is not the case, then you want to open your Lightroom Catalog and then reconnect the top-level folder that contains your pictures by right-clicking on this top-level folder and then to find Missing folder pointing Lightroom on the equivalent top level on your new drive main folder. The details are described here (see Figure 4): Adobe Lightroom - find folders and files moved or missing

  Side note: re-import never corrects this problem, it only makes it worse. Never use to reimport into solution in Lightroom.

• How get/download the themes of film for first 11 elements?

  How can I get themes of more movies for the purpose of "Instant animation" in first 11 elements?  Downloaded version has only "pan and Zoom".

  pfkmd76

  Please check my blog post with all the details on first elements 11 content.

  http://www.atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html

  Essentially, the rest of the content of the program is obtained as a download from the Adobe project.

  Note the blue ban at the top of the thumbnail for the models of themes of movies, movie Menus, titles. You right click that and then decide if you want to download just a theme represented by the thumbnail or all themes for the section that you are, namely the title of movie themes templates, movie Menus.

  Please let us know if you have other questions about this.

  Thank you.

  RTA

• format of the file exported by the plugin SDK exporter for first pro cs4

  Hello

  I am trying to build a plugin that can use a codec customized to export a video imported to h264 format.

  The codec I use converts a raw YUV420 format h264 video. As stated in the Guide of the first SDK

  the exporter SDK is not compressed 8-bit RGB with or without alpha and packed
  10-bit YUV (v410). The initial rendering is done by the RenderVideoFrame() function call, which is said in RenderAndWriteVideoFrame().

  It is then converted using various calls such as ConvertFrom8uTo32f(), ConvertFromBGRA32fToVUYA32f() and ConvertFrom32fToV410().

  The problem I facing m's than I m not able to check if the RenderVideoFrame() is working properly and the format in which he writes.

  Is it possible to check using any multimedia player that can play the exported video. Unless I know that the exact exported format (correct)

  I won't be able to convert the required format of YUV420 I need.

  Also if I use the ConvertFrom functions and use only the video stream released RenderVideoFrame, can u clearly specify the format

  and any multimedia player that can play, in order to check the operation.

  Thank you

  Agam

  Hello Agam,

  The exporter is what writes the actual file, so, technically, you can create everywhere where you want.  The exporter gets exDoExportRec.fileObject during the exSelExport selector.  You can use the file Export Suite to get the path provided by the host (Premiere Pro) and instead to write media to a different file path using your own file system calls.

  However, written to a different location may have undesirable side effects, since the host won't know if you changed the destination of the file.  This could cause some things to not work, including:

  Automatic importation after having made a direct export (do not use the queue of rendering SOUL)

  * XMP embedding (for metadata)

  * Post FTP Encoder process (which can be specified by the user in the export settings FTP tab)

  Zac

• How can I download the 30 day trial for first adobe?

  There is a list of the requirements that my mac computer should "download trial" but I'm not sure what some of these things are.

  Ive managed to download an editor of first things, but this isn't quite the same thing and leaves a water mark on everything.

  Please please help!

  http://forums.Adobe.com/thread/1315644

• patch for first elements 8

  I am trying to download the 8.0.1 for first 8 update my system say that the file is locked and cannot be replaced because I don't have the right to access the file.

  ideas please

  Welcome to the forum.

  Now you run as administrator? If not, you will want to do this first.

  Also, have you pre installed on your C:\? This is where he wants to be installed, and problems ensue if you chose any other HARD drive, even if the path isn't serious so much - to the car.

  Good luck

  Hunt

• Preparing for first use Outlook.

  I applied office 2013 models and my user settings seem to be saved, but whenever I run outlook from a new non-persistent session application, it crosses the minute 5 "preparing for first use Outlook."

  Is this typical? any ideas how to make so that it can start normally as it would have done with the former manager of profile?

  Ok thank you

  Have you created an EMU config file to save the. OST /. With EMU PST file? If this isn't the case, would this then, that every time that you start Outlook, PST/OST files is created (preparation for first use Outlook)?

  The best way is to redirect your. OST /. PST file in the network or the user's home directory. (so if possible, try to find out why Outlook ignores your redirection)

  Raymond

• I'm looking to build a PC for first, after effects and photoshop for €600-1200.

  Hello!

  It's been a long time that I built a PC and I have no idea what parts are good for a work for the adobe programs PC!

  The PC is mainly for first and photoshop (nothing too hardcore for most of contents HD - 2 K).

  I tried to search messages here in the forums, but they also changed so I can't find anything! (I'm such a fossil)

  Please help me folk forum! You're my only hope!

  Leo

  Start here:

  Page of tweakers

  and then ask here:

  Forum Hardware

• Replacement of the first Gen nano with? ...

  I send you my Nano first Gen. in the replacement program, someone here can tell me what Nano I could get replacement?... I'm assuming that they no longer have the nano first generation... I just want to know. No one at Apple can tell me, I want to be happy with what I get. Online, I have seen that some get the Gen 7 and some gen 6 (which I'm not a fan of the world). It would be nice to be able to choose because I paid for the original.

  For some time, they have been replaced with either a gray or silver 7th generation Nano.

• Replacement of the joint for W530

  Hi all

  A few months ago, in this forum, I asking me for information about the compatibility of signs for the wince my Panel W530, AUO B156HTN01, is a less powerful Panel. I get the contrast ratio is less than 400: 1 (average 330:1) and color cast I get is too blue. While I have a laugh X i1 Display Pro to correct the pitches with the LUT of the graphics card, I still have problems with the angles of vision (very bad) and a bit of a magenta cast and the low level of contrast as well as the screen door effect which is annoying in white or near white surfaces.

  I'm a photographer and I would approve this computer for work on the field and color delicate work, but the difference between this and my NEC monitor is too big to ignore. So, in the hope that the v4 or v7 will improve things compared to the Panel that gave me, I feel as if I had nothing much to lose.

  So, I investigated a bit trying to get their hands on a v4 B156HW01 panel or a v7 (brilliant with better contrast than v4) and increasingly used those cannibalized from other systems, I was never able to get a good replacement.

  So far. I managed to get an old stock seller through a contact in Asia and will get a v7 v4s being really out of stock everywhere wherever I can find. Those who try to sell you v4s you will likely receive a "compatible" part... but not the same panel.

  I know that brilliant is not everyone and it's certainly not mine, but I have colleagues who work with happiness on their macs very bright and while they dislike screens nice masts, chandelier did not prevent any of them to work. The difference of color in the B156HTN01 permanently prevents me from working so I'll give that a go. Better precision on glossy paper is better that a shit mate.

  I will post differences on a before and after the State of the computer. To make it fair, I'm going to re - install everything (windows and batch) to ensure that any previous color calibration is left on this computer to change the perception of the signs.

  If anyone in the United Kingdom or HAD is interested, I'd be happy to get another, and we can divide the total. The panels would come to England so if you are in the European Union you need cover shipping from me to you.

  Final part.

  For anyone in England, be aware that your package may take about 10 days to pass customs and an extra 48 hours to Parcelforce to deliver the parcel.

  So, after this long wait, I received the new v7 Panel and began to make the Exchange.

  Before that, however, to give the Panel a B156HTN01 fair to prove himself, I took some pictures with the Lenovo default color management profile. See the first launch of two images, blue, from two angles.

  

  

  Now to my point of view, I ran a quick profile with the largest range of i1 Profiler (Yes, I know it has its drawbacks, but for a quickie profile is not horribly wrong and the contrast ratio is persistent)

  This is the result.

  

  See here the contrast ratio is 247: 1... very bad.

  I followed the video of this gentleman to do the Exchange.

  http://www.YouTube.com/watch?v=Igk0MiqZ_ck

  To take the bezel out, however, I used a lens clening Microfiber cloth to place my fingers between the screen and the bezel and he jumped in an easier way than shown in this video. So if you go by with the spirit which.

  

  Tests after replacement to see if it works.

  

  Glossy screen W530

  

  Profile color management on the new vs NEC PA241w v7 for reference monitor (the NEC screen is calibrated to 6500 k, range of the aRGB and gamma 2.2) by default

  

  Now, with DispcalGUI takes some time, but, since we want to measure the success or failure of the new Panel v7, I ran it. The following screenshot shows the almost corresponding screens with the v7 and NEC monitor AFTER profliing with DispcalGUI.

  I was a little tired so I missed the horizontal framing for these two pictures. It is the report of DiscalpGUI.

  

  Mind the 632:1 now and the black luminance contrast ratio is not too bad to 0.2 cd/m2. It is not a contrast ratio impressive many screens of 1000 +: 1 of today, but it's very good for a 2 year Panel, able to display most of the Adobe RGB color range as seen in this comparison with the NEC Spectraview graph. DispcalGUI for v7 on the left and for NEC PA241w Spectraview on the right.

  

  On DispcaGUI, the dotted line represents the spectrum AdobeRGB and Spectraview is the yellow line.

  Not bad, huh?

• lost my disc for first elements 8 s/n for the software where can I find a download for pe8?

  I lost my disc for first items 8 and hd has been replaced, where can I find a download for this product have always s/n of the product can anyone help?  Thank you

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 8:

  http://prodesigntools.com/direct-download-links-for-Lightroom-3-and-Photoshop-elements-8.h tml

• PE1950 R3 PERC6 / i - Drive replaced and returned at nine but still flashing the model "identify/preparation for withdrawal?

  Hello

  First post - forgive me.

  I have a Dell PowerEdge 1950 of R3 with basket 4 x 2.5 "SAS/SATA connected to a PERC 6/i. 4 x 1 TB SATA WD red disks are mounted configured in a RAID10, and all worked happily for 6 months. A drive has failed, so we jumped out and jumped into a new. Rebuild starts automatically and completed in 208 minutes.

  Now all is well again, unless the reader identify / preparation for the distribution of light removal still flashes on the replaced disk. Table health is reported as optimal, all the disks are online, and there is nothing wrong in newspapers PERC.

  Is it just a firmware error which may disappear during the next reboot? (We cannot restart this machine right now... don't ask!) but it makes me nervous even if everything works well and the newspapers to report a successful reconstruction and optimal condition.

  Thanks for the ideas, you may be able to give!

  Lee

  Product name: PERC 6 / i integrated

  Serial number: 1122334455667788

  FW Package Build: 6.3.1 - 0003

  Data from MFG.

  ================

  MFG Date: 24/06/08

  Transfer date: 24/06/08

  Revision number:

  Battery FRU: n/a

  Version of the image in Flash:

  ================

  FW version: 1.22.32 - 1371

  BIOS version: 2.04.00

  WebBIOS Version: 1.1 - 46-e_15-Rel

  CTRL-R Version: 1.02 - 015 B

  Pre-launch CLI version: 01.00 - 022: #% 00005

  Boot block version: 1.00.00.01 - 0011

  Images pending in Flash

  ================

  None

  Our only other option would be to use OpenManage for send omconfig commands. If your version of Linux is capable of running OMSA then you can install it and then run the command:

  https://Linux.Dell.com/repo/hardware/

  If you can not install OMSA, then you can start on a live CD/DVD of the OMSA:

  http://Linux.Dell.com/files/OpenManage-contributions/

  Direct OMSA is a CentOS distribution that has OMSA and several other utilities built. It is installable, but you do not want to install it on your current OS so be sure to select the live Webcam or load the option memory at boot.

  Once inside of the OMSA live or after installing OMSA in your current operating system, you should be able to run this command to unblink drive:

  omconfig action of pdisk storage = unblink controller = pdisk 0 = 0:1:2

  You may need to use omreport about what are your ID controller and pdisk. on the pdisk is controller: channel: IDLecteur

  Thank you