REPLACING A REAR PANEL

How & where can I get a replacement back panel for HP PAVILION DV6 3117 do YOU

Product number: INA102S77H

Product model: LN349PA

Would be good if you can provide the price and other details

Hai,

Thanks for your reply.

But the link you sent me is letting me to buy something...

I need the BACK PANEL... the Panel which is present at the back of the laptop. (Black)

Product model: LN349PA

Product number: INA102S77H

Can u give me the exact link where I can go ahead and buy this

Tags: Notebooks

Similar Questions

  • Z61m: Replacement of LCD Panel (WSXGA + WUXGA)

    I own ThinkPad Z61m (Type 9450-HAG). Unfortunately the LCD does not any more (only the first third of the works of the display).

    I consider replacing the LCD screen (WSXGA +, FRU No.: 13N7020).

    Is it possible to replace the original panel with WUXGA Panel - 13N7198 or 13N7178?

    If it is possible, is it enough just to replace the or it is also necessary to replace the other laptop parts and/or upgrade the BIOS or other software?

    In this case, you should be all set once you replace the LCD screen. Your graphics card drive without question, he's fine.

    Good luck and we keep abreast.

  • Is my Xperia Z2 always watertight if the rear panel is cracked?

    Hi there, I was just curious to know if my Xperia Z2 is completely impervious to water as the rear panel has many long cracks on it. The Panel is still intact outside a few shallow chips and I would have thought that there are other layers below the surface to protect the internal parts of the phone, but I just want to be sure that I know if I must now be careful around water with the appliance or not.

    There is that one way to find out, contact your local care Xperia and request a trial of vacuum.

    http://support.sonymobile.com/global-en/contactus/

    In my opinion, is more impervious to water, there is no risk of

  • HP Pavilion 15-p064no: opening HP 15-p064no rear panel

    I was trying to dust off the inside of my laptop 15-p064no due to some problems of overheating, however, after unscrewing the screws on the back panel, it seems the rear panel does not come off (tried a sharp knife between the seam and all). Is it still possible to open the template in question?  I tried Googling/searching the support message board, but it seems not to be much information about this model.

    Hi @LV94,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-p064no and to have to remove the back panel or bottom for cleaning. Here is a link that shows you how do to clean the fans of dust.

    Here is a great video that shows you how to enter it. Some you will need to remove the CD/DVD as well.

    Please let me know how it goes.

    You can say thanks for trying to help, by clicking on the Thumbs Up below! .

    Thank you.

  • Area-51 R2, Front/Rear Panel Audio problems

    The audio jacks on the front panel will have on struggling audio back panel.

    So if I plugged in front back speakers and headphones plugged in front panel, I hear speakers AND headphones.

    When I checked the control panel windows (Sound - reading devices), there was only a single 'speakers', ' helmet '.

    Then I checked Sound Blaster Recon3Di configuration and the front panel and panel back taken were all lit and works well, but it wouldn't separate the sound from the rear panel and façade.

    Then... I deleted the Sound Blaster Recon3Di driver, and now it works as it should...

    Now there are "Speakers" and "Headphone" in the list of playback devices. But now "What U Hear" does not appear in the recording devices :(

    Can someone help me? I tried to delete the driver and clean reinstall the driver, but it wouldn't separate the front and back audio.

    Lunch a Update driver yesterday, if it please try and let me know if it works.

  • Xperia double Z3 on the rear panel detach

    My first day of use of the Sony Xperia Z3 double that I bought just yesterday, I noticed that on the lower right side of the rear of the unit is the thing the plastic plate that takes a bit... is not otherwise perceptible but it's gets me so I would like to know if there is some sort of solution to this problem. Also, if in fact, I have to live with that, he would compromise resilience to water of the phone?

    PS When I press the backplate, it kind of rest there for a few seconds more or less

    Thank you

    He must return to the retailer first as that should not be the case. The manufacturer's warranty is a relief but not your first point of call. And the chances of that being water resistant are far... ask for a new replacement because it is a phone and worth persevering with.

  • Different serial numbers of U3014 monitor on the rear panel and the WMI class

    Hi, I'm doing an inventory of COMPUTER equipment.

    I had a problem with DELL U3014 serial numbers:

    DELL monitors have different serial numbers on the back panel and the class WmiMonitorID.

    For example, there are 20 digits alphanumeric serial number as CZ-0F525M-73608-021-341, on the Panel back and there is the serial number of the alphanumeric number 12, as F525M021341L to the WmiMonitorID class.

    Why is this happening?

    Y at - it an official document that explains this replacement of the serial number?

    I have no problem with the monitors from another manufacturer.

    Because the Dell order number is lost, there is no way that you or Dell can prove any guarantee. Without evidence, Dell will only guarantee the monitor for 3 years based on the serial number.  This sounds like infringing material in not usa or EBAY or something other than Dell.

    CZ-0F525M-73608-021-341 L = February 1, 2010 to February 1, 2013 to a U2410

    This number is taken from this forum.

    First 2 letters is country of origin.  MX = Mexico CN = China CZ = Czech Republic etc.

    0F525M is the number of Dell.  It is an IEMEA part number.

    It is not a U3014

    http://www.impactcomputers.com/f525m.html

    The forum is not a guaranteed correspondence Committee.

    The forum is not about service or warranty outside the United States.

  • 6. rear panel s rose gold gets scattered points of corrosion

    Hello

    I use Iphone pink gold 6s for 6 months, all of a sudden I see points small corrosion on the Panel back on my phone.

    All entries on what to do?

    Thank you

    Hari

    Hello! Just buy coverage at the apple store! Thank you

  • I have touchmate pc it isn't its rear panel, I maen when I plug the rear panel speaker there is no noise, but when I plug frontpanel works. Prior to the two panel was allso helmet is the same proplem

    no sound  I get this problem when when I started using headphpne and speaker at the same time, and it coused stop working together. I tried to fix it I not unhooked device and Istalled kdshjfk but after speaker instalation and haedphone work only on the front. Mark I will get help. Thank you

    Hello misibij,

    1. remember you to make changes to the computer (hardware or software) before having this problem?

    This problem may be related to your computer hardware. The front and rear taken on a computer operate on different sound cards. If the sound does not play on the rear socket, you can try to reinstall the drivers for the sound card that you have already tried. If still fails to play sound on your computer. I suggest that you check if the sound card on the computer is defective. You can contact Touchmate help you with this.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Is there a way to permanently hide the new CS6 so rear panel to have a space of work similar to CS5?

    For example, CS6 Adobe introduced a new Panel in all their products (Ps Ai Dw Fla etc.).
    I guess that their intention is to contain everything (Tools, images,...) inside of her, but I find it so frustrating: this Panel hides desktop or other applications open, so I always have to double click it to put it on the spot and have access to other resources.

    How can I define CS6 to have an interface of type CS5?

    In photoshop, go to the window and uncheck the Application Framework.

    Cs6 other applications could have a similar option.

  • Lost all the icons of printers in the rear panel Installation Acrobat Reader X 10. Every time when I tried to add a printer (to re - install): Pc autostopped print spooler.

    Uninstalled Acrobat Reader, problem still there.

    The system restore.  Still no help.

    Is gone at the beginning-Online Admin Tools-online Service =>-online Start print spooler.

    But as soon as you click on "Add a printer", auto pc stopped print spooler again.

    (Think that a 'Printer setup' command has been blocked in the pc...) ?

    Please read one of the web pages I've linked to step B.

    Did you go to the HP support as suggested?  I sounds like you need to re - download the software.  Again, read "Article 1."
    What makes you think that "Active X" has nothing to do with your problems? Or are you confused 'Active X' with Adobe Reader X (for example, Adobe Reader 10)?
    What do mean 'Java Active x?  Java and Active X are two completely different technologies, Sun and Microsoft.  There is a 'Java - Active X Bridge,' but most of the users would not be involved with that.  Where did you get "Java Active X?
    The only thing that you definitely don't want to (and cannot, in any case) is upgraded to Vista.
  • Takes a lickin', keeps on tickin'.

    Maybe this is one for the record books, but seriously, I need comments on how to get the most "bang" for the buck in this situation.  My iMac 27 "new found himself on the wrong side of a landfill by negligence of 45.  No one was injured, but the iMac, as shown in the photos, took the ball in the bottom quarter on the screen and you leave the rear part.  The ball missed all internal components, and the iMac continues to work but (except for the hole and the areas immediately surrounding it).  Even with a bullet through and through, the iMac continues to work like new.  I even managed to my Apple Store date on it shortly after the 'incident '.

    My crew of Apple Genius local ran diagnostics on it and only found no problems with its operation.  My options for repair replace screen, rear panel and speaker (box was slightly damaged), the estimated cost of about $1 100.00.  The iMac has been the talk of the Bank, that nobody had ever seen anything like that, even remotely resembling this "situation".  They were all astonished that it still worked!

    My question to the community, it is what would be my best course of action?  A can't really afford to buy an another new iMac, and the repair cost makes it prohibitively expensive to fix.  Would I be able to save its components in order to recover a part of my initial investment?  Think outside the box, would Apple be interested to use it as an impressive example of how their products are resistant to this kind of abuse and continue to blow?  I know that my chances of any type of 'deal' are slim, but if any company would consider measures, it's Apple.

    Ideas, advice, recommendations, comments, etc., y ' All could provide would be very appreciated.

    Sell le.45 to help defray the cost of the repair.

  • HP officejet 6500 biased paper feeding of small paper (4 X 6)

    I have alignment issues when I try to use the 4 X 6 photo paper. I tried the printer head alignment and it seems to be makes it worse. I am running Windows 8.1. I see a little oblique when I print a test page for full size. I watched it pull into a 4 X 6 page and it looked like he pulled in asymmetrical (perhaps not the print head). Any suggestions?

    Hi picture_this,

    I see this is your first visit with us here on the Forums of HP.  Please, let me take a moment to say 'Welcome. '

    To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I see that you have a problem with throw or twisted impression.  A very important thing that you can look at is the printer rear access panel.  Please, remove the Panel and ensure that the small white wheels are circulating freely and do not bind somehow.  When you replace the rear panel, please be sure it snaps firmly in place and that one side does NOT stick.

    Another thing to look at is the power for the printer cable.  Please make sure you have the power cable plugged directly into a wall outlet and not a strip bar.  Here is a document that uses a LaserJet printer for example, but is intended for HP products in general.  Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    Please let me know if you still have questions and I'll be more than happy to do more research on the issue.

    If I don't get an answer from you today, I hope your Friday is a good and I also hope you have a fantastic weekend.

    See you soon,.   

  • How to get rid of a spot on the Panel rear aluminum macbook pro?

    I have a macbook pro covered by a pink hard case. After that I removed the case, there is a spot on the rear panel in aluminium. How can I get rid of him?

    Post edited by: SweetSilence

    Have you contacted the manufacturer of the case?

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • HP ENVY 15 laptop: laptop bottom panel replacement

    Hello

    I bought my laptop about a month ago and it is currently under factory warranty. Two days before I accidentally dropped my laptop table and there is a break in the lower panel. It is possible to replace my bottom panel under warranty. If this is not the case, how much it cost to replace the Panel from the bottom only. Please advice. Thank you.

    The standard warranty does not cover physical damage to a drop. You will need to have a protection against accidental damage, which would have been sold at an additional cost. It is the image that the fall has also put a small crease in the top cover. These parts are available, but very expensive HP and labor to do the replacement is also very expensive because you basically rebuild the laptop from the bottom to the top. If you are interested in pursuing the repair at your expense, post back with your country of residence and the number of full model of the laptop, so we are sure that get us the right parts. We can provide a manual, a video (maybe) and help find the parts as economically as possible, maybe not directly from HP.

    Furthermore, this isn't a warranty HP channel and I don't speak for them. If you want to hear from the horse's mouth opens here a case of pension:

    http://h20566.www2.HP.com/portal/site/hpsc/public/SCM/home?AC.admitted=1441971775406.1123376534.199480143

Maybe you are looking for

  • I have a song on my device that is grayed out. How can I remove it?

    In the "On My Device" section in iTunes there is a song on it is gray. I want to remove it but it does not meet clicks. How to sober up so I can remove it? I looked through my phone and my account settings. I even tried downloading the album once aga

  • Dv6-72229nr want drivers Windows 7 (64-bit)

    Hello, I installed Windows 7 on my machine, but there are 7 drivers needed. If anyone can help that would be much appreciated.

  • NetCut! A person is to destroy my network using this software.

    Someone is using netcut in my network where I am providing internet service to about 100 computers via local network. Please help me the person using this software, disconnects from my clients on the internet and if receive so many complaints. There

  • Cannot find valid printer URL to add a printer for windows machines

    To make it work fine in linux mint, I had no complaints there.  The problem is that I am installing this on a corporate network with a system operating heterogenious environment. Here's what Linux Mint uses to connect to the printer: [code] HP: / net

  • Configuration & SRI and UCS description

    Hello Operating from my previous post, I would really appreciate if a good person want to throw some light on specifications of SRI and UCS, and configurations usually supproted on them and all the descriptive stuff about the same, I am preparing for