Report inaccurate frequency in the section analyzes frequency

Similar Questions

• I want to maintain the "frequency of sampling to report signal frequency" a constant.

  I want to generate sine waves of varying frequencies, say, from 1 Hz to 1 kHz. Sometimes, a swept frequency sine wave. The problem is that I want to maintain the "frequency of sampling to report signal frequency" a constant. That means, the sampling frequency must be 20 or 30 times the frequency of the signal. This should be done automatically. For example, a sweep of 1-10 Hz, if the sampling frequency is 30 Hz at the beginning, it should be automatically updated at 300 Hz as the frequency of the signal reaches 100 Hz. Someone you will suggest a possible solution?

  The basic generating function function has an entry titled "sampling info". It is a cluster and one of the elements is the number of samples. You just need to set this based on your frequency.

  

  I suggest strongly that follow you the course 101 of LabVIEW.

• HP Deskjet 3070: why it analyze only the sections of a document?

  I had Mac Os 10.8.5. My HP 3070 will scan only parts of a document, about a quarter of the entire page. Why is this? Is a driver update that I should try?

  Thanks for your help!

  Hello
  The default scanning workflow can be configured to analyze 6 x 4 inch photo or auto crop the original. Be sure to change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• How to erase history of reliability report details in the section "maintenance" of the Centre?

  Original title: reliability history

  Is there a way of compensation reliability history report details in the section "maintenance" of the centre?

  Hello

  Please keep us updated.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Why do you want to delete the contents of "the history view reliability?

  The reliability monitor has a chronology of software and hardware changes, application failures and shutdown problems.  The version of Windows 7 does not collect data using WMI (Windows Management Interface) and this explains why there is no executable file as resmon.  WMI also allows you to collect reliability data using Windows PowerShell scripts.

  How to reset the history of reliability monitor?

  Suppose you want to resume, and clear history of reliability monitor; This is how to do it:

  a. you need locate the folder of RAC, it's usually to:

  C: \ProgramData\Microsoft\RAC

  (b) to decide if you want to keep the data, if so, then copy or save the sub folders PublishedData and StateData.

  c. Select all files in the C: \ProgramData\Microsoft\RAC\PublishedData folder.  Right click and delete.

  d. repeat to C: \ProgramData\Microsoft\RAC\StateData.

  e. now that you have reset the reliability monitor, it will automatically start recording new data.

  Hope this is useful information. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Request to the section is clear when I click the link remove in the report.

  Hello
  
  I added option delete in SQL report. To delete record, I use java script and remove the sql query.
  Now the problem is when I delete the file then page is refreshing.
  
  I've created a report that is on the page of no 1 and option is edit report.when inthat I click this button then change id respective don't enter page no 2 in a hidden item P1_id.
  I do not perform the Delete on the page operation No 2.
  
  so the problem is when I click on remove linl in report to delete record page refresh and my ID of the request in point is also updated.
  
  
  so I want to when I click on remove in the report, then registration should be delete, but asking the point should not be clear.
  
  Java scipt
  

  <script type="text/javascript">
   function doDelete(p_arg){
     $s('P1_SELECTED',p_arg);
     doSubmit('DELETE');
  }
  </script>
  
  --------------------------------------
  
  BEGIN
  
  DELETE FROM TC_DETAILS WHERE LINE_ID =:P1_SELECTED;
  
  END;
  
  ----------------
  
  javascript:doDelete('#LINE_ID#');

  Hello

  Do you have processes that clear the cache of objects?
  Your agency you clear cache of items?

  Kind regards
  Jari

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to read the VI Analyzer config file?

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  Kaspar says:

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.

• The Microsoft Security Alert shield is red in the section of the taskbar notifications. Help, please!

  The Microsoft Security Alert shield is red in the section of the taskbar notifications. I opened it and it says virus protection is turned off and "Microsoft Security Essentials reports that it is turned off. Checked with Microsoft Security Essentials and it says computer is protected. What should I do? Thanks for help!

  The Microsoft Security Alert shield is red in the section of the taskbar notifications. I opened it and it says virus protection is turned off and "Microsoft Security Essentials reports that it is turned off. Checked with Microsoft Security Essentials and it says computer is protected. What should I do? Thanks for help!

  I'm guessing that you're referring to a problem involving the Security Center that happens sometimes after update silent through updates of Windows to the new version of MSE... but it is also sometimes occurring after the updates of Windows 'monthly '.  Usually, but not always the problem occurs on computers running XP.

  If the MSE icon is green then you should be protected and cannot ignore this Security Center warning. The problem resolves after a few days.   I do not pretend you disable the protection in real time on MSE, disable Security Center, restart the computer and then turn everything back on and restart once more... some users report this sequence fixed the problem.

  BUT

  You may want to consider the following threads:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Ive-Windows-essential-and-is-showing-me-my-PC/c76fc125-c21f-46a9-8B9F-c9b1311171b1

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_updating/Security-Center-message/558e1220-9f21-4e6c-Be92-ddcc65d36c0c

• HP deskjet 3070 sweep in the sections

  I have a deskjet 3070 when I scan a document, it is sent to my computer into sections

  Hello
  The default analysis workflows configured to detect separate elements. Be sure to change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan the image.

  Kind regards
  Shlomi

• The "Scan" button does not appear in the section of text analysis. Please notify.

  I imported a video. I'm in the metadata workspace and the 'Analyze' button does not appear in the section of text analysis. How to make it 'Analyze' button to appear and work?

  In the video tutorials, the Analyze button is already visible.  How it to appear?

  I'm looking to transcribe the audio in a video file to the text.

  Thank you!

  See:

  Using the analysis of speech in first Pro CC

• Report does not display the contents of the property

  Hello

  DM 4.0.2

  I use a custom to report on the tables in the Data Modeler.

  A section of the report contains information about the columns. So I added among others, PK, FK column property and mandatory element. The columns appear in the report, but remain always empty, although the columns Pk, FK or mandatory.

  If I use the standard report for tables, the columns mentioned are met.

  Is it possible to copy the standard report to see how this report is built?

  Thanks in advance,

  Joop

  Hi Joop,

  There is a bug when generating custom reports from the file-> reports. But everything goes well during the generation of the custom of the search engine report.

  Bug will be fixed in the next version.

• Link chart action for refreshing a report of region within the same page

  Gurus of the APEX

  As long as we have the graph and report region region on the same page and based on the action of graph link must be able to refresh the report region within the same page

  for example: I expense spend by category such as a pie chart and on the link of the action of which I want to refresh a report region by the right of it (in the same page) to show the details contained in this category spend - also I do not have to réactualisiez around the same page, just to refresh the region related to the category Click on the graph

  Any help would be great on this - I use APEX 4.2

  Thank you

  Shas

  Thanks Tom / Scott - sound now worked

  Following my code for the javascript function in the page section,

  function clickPie (pID) {}

  $x('P4_ITEM_CATEGORY').value = pID;

  $('#CategoryDetailsDD').trigger ('apexrefresh');

  }

  And here is my URL of the link graphic action section

  JavaScript:clickPie("#label#")

• Removal and the reorganization of the files in the section of a course resources

  How can I delete a file in the section of a course of project resources? How can I rearrange the files in the resources of a project course section?

  If the answer is that I can not, please review my questions to a feature request. Thank you.

  Thanks for the question, Anna Marie. Yes, I connected a similar request myself. Here's a bit of clarity on how first manages the edition of the States to be the author of the course.

  There are essentially three States of a course, once you have completed this course.

  • PROJECT - you got to set the course and maybe even recorded, but not yet published.
  • PUBLISHED - you have published a course, and he is able-update (you can update modules)
  • RETIRED - you removed the course. You can republish a course, but it becomes only partially editable.

  In most cases, the old state allows you to edit the basics - for example. name of course, description, etc., but there are aspects of a course of retirees that cannot be changed. (IOW it refers not to the State of PROJECT.)

  Here are the things that cannot be changed in the OLD State:

  1. You cannot add a course module.
  2. You can not delete a course module.
  3. You can not re - sequence the order of the course modules
  4. You cannot change the access of navigation for the course modules
  5. You cannot change the assigned skills / skills credits
  6. You cannot change the type of registration (eg. self register, Director approved etc..)

  Perhaps more importantly, in the immediate future. You can duplicate a course and effective that return you to a State of DRAFT. The advantage is that it becomes the road to DRAFT - fully editable, without having to recreate the content. You will be able to rearrange the modules etc.  The downside is that if you have already deployed the course - and you want to data combined - you would aggregate data of the original and the new together in your reports.

  Thanks again for your comments. I'll be sure to share them with Deepak and first engineering team.

  Allen

• image of the section of text or an image of dashboard is not delivered throug ibots (OBIEE10g)

  Hi all

  I have a dashboard in obiee10g, an image (jpg file of the logo of the company) is added using text or image section. I configured an ibot to deliver the dashboard as an HTML tag to the email receipents (as the desired user dashboard that the content of the email rather than an attachment). However when I deliver it to HTML, image (company logo) does not appear in the e-mail instead, an empty section appears. (missing picture)

  If I deliver it as one attachment other than html, then the image is displayed in the attachment from the mail.

  kindly post if no solution is available.

  Thank you

  Kind regards

  Arjun.

  Finally after trying several ways, I could send the image to send. However, it must be called from the display of the title of the report.

  For the title, Image should be called from the Logo field using fmap:images\image_name.jpg

  hope it helps someone else.

• SQL report should look to the updating of the continuous element

  Hello

  I have a question about how it is possible to do a SQL report that looks like the element continuous is changed in the browser.

  I now have this SQL query:

  Select x.first_name, x.Last_name, it. Nom_element, ui.user_item_ID, ui.item_ID, ui.employee_number

  of APEX_EBS_ACTIVE_LIST x,.

  USER_ITEMS ui,

  ELEMENT that she

  where x.employee_number = ui.employee_number

  and it.item_id = ui.item_id

  and ui.employee_number =: p7_employee_number

  ORDER BY x.last_name

  I have Apex page 7 a popup lov (P7_employee_number. When selection here the employee_number I want that the SQL query displays at the same time the report below on the page with the information on the employee.

  Does anyone know how this is possible? I use APEX 4.2

  Thank you!

  
  Concerning
  ELCO

  ELCO

  On point page p7_employee_number have a dynamic action with the event 'change '.

  Have an action "Refresh" with as affected the region of you're sql statement.

  Make sure that the p7_employee_number element is declared as "Elements of Page to submit" to the region.

  Which will refresh the report whenever the item is changed.

  It is with the section of the page and the report are not on the same page apex.

  Nicolette