HP deskjet 3070 sweep in the sections

Similar Questions

• HP Deskjet 3070 has replaced the cartridges and still not printing

  My printer says I need to use the cartridges Set UP with my printer which is impossible because my printer is 20 months old. I had no problem with any kind of impression e-print etc. until now, I had to replace my cartridges. I bought HP364 and I tried and cleaned my printer but it is not printed. Sometimes he tells me Magenta compatible is 2 days later it say Cyan was not compatible.  Please can you help me

  Thank you so much Ciara. Problem solved you are a wonder!

• HP Deskjet 3070: cartridges missing or defective

  I put new cartridges in printer Deskjet 3070 and now the error message is displayed: cartridges missing or defective. I placed the new cartridges and cartridges is not error. Are the cartridges default?

  Hey Cheeseslicer,

  The best thing you can do is to give the printer a hard reset

  Also replace the cartridges might solve the problem.

  Insert the old cartridges you also find the error?

  Please let me know.

• My Mac Pro and HP Deskjet 3070 PowerBook does not connect via a wireless network from dorm

  Both my laptop and printer (an all-in-one) are connected to the same wireless network dorm, but they do not connect on it.  They connect only wire using a USB cable.

  I have for the MacBook Pro and the Deskjet printer IP addresses but no way to use to establish a connection.  I don't have access to the network router.  When I test the connectivity, the software tells me, "too many networks."  He can't make a choice!

  Interestingly, I have my MacBook Air along this journey, too, and the two MacBook have no problem of communication on the same network of dorm.

  Is it possible to plug these devices such as computers connect or should I remain attached to the USB cable to use my new printer?  I guess you know how I feel about this.  Thanks for your advice.

  You are right.  There is no way to bypass security protected by password and thus to connect a Mac to a Deskjet 3070 via a secure network without access to a router, and a password.  However, even without access to a network or a router, there is a workaround solution.  In my case, where the technical ability to correctly configure the router and the printer is beyond the understanding of the management of the dormitory, qualified through the difference to happen anytime soon, it is the answer I need.

  The solution is to build your own Mac + network printer and make it private, protect it against unwanted entry.  This offer you little mobility in the area of the printer, which is much better than nothing.  A sofa can be more conducive to creative thinking as an Office Chair.  The unconventional twist that Johnny introduced the user, the printer that generates the sender-recipient, not the Mac network.  Very smart.

  I refer you to the thread,

  "Deskjet 3070 cannot connect to the ad - hoc network (Mac)"

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/DeskJet-3070A-cant-connect-to-ad-hoc-network/m-p/1446819#M38598

  Then the only question is to know how to connect your Mac on the Deskjet 3070 printer via the generic (as he calls it, "ad hoc") network created by the Deskjet printer.  The Mac has abundant features for this purpose.

  Thanks for the categorical assertion, however.  No sense to break down the walls looking for a nonexistent hidden tunnel...!

• HP Deskjet 3070: why it analyze only the sections of a document?

  I had Mac Os 10.8.5. My HP 3070 will scan only parts of a document, about a quarter of the entire page. Why is this? Is a driver update that I should try?

  Thanks for your help!

  Hello
  The default scanning workflow can be configured to analyze 6 x 4 inch photo or auto crop the original. Be sure to change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• HP Deskjet 3070: HP Deskjet 3070 extend the wifi signal

  Is there a possibility to extend the printer HP Deskjet 3070 wifi?

  No sorry.

• DeskJet 3070 ceased to print a few days after replacing the black print cartridge

  Please help me, I have HP Deskjet 3070. There works well since then, but I replaced just the black cartridge with original ink and he confirmed that it was a real ink, I printed a few documents and everything was fine and it's just less amonth ago.

  But unfortunately I turned on the printer a week later, but it prints, it only passes through the paper as if it is printing but instead he brings her on a white sheet.

  The task of mentenance using I could see the State of health, says the good. Show full of ink cartridge ink level. Device report - derniŠre indications affixed some pink, blue, yellow rectangles and the printed report print 4 holders.

  I noticed someone has posted a simlar here question one obtained help same day via private message that he has fixed his problem, I commented here a week ago and had asked for help, but have had no response to date.

  Today, I installed a new black ink, thinking that he could be in ink, but she does not always print anothere.

  Please help me.

  New replacement printer arrived today with the new inks, installed game machine with the new inks and everything works as it should. Old machine is to immerse for recycling as advised.

  I'm relieved and I appreciate the after sale HP just rendered services. Although I am a little worried and now fear that it could happen again "after the guarantee" since no clear explanation is given in what concerns what could have caused the failure. And judge with an option of replacement is the best solution, it seems like the cost of the den could be greater than the value.

  Finger is crossed, I hope that it will serve this time or at least give reseonable service before getting on my nerves.

  Thank you HP.

• I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.

  Hello

  I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?

  Thank you

  Tim

  Hi Tim,.

  The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.

  You can download the latest version of the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107189-2&cc=us&DLC=en&LC=en&OS=219&product=5068754&sw_lang=

  After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.

  Shlomi

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi

• HP deskjet 3070 e language on the screen of theprinter

  language in the window of the printer is in Spanish and I don't know how to wear, how to englsih

  Hi gingermafia,

  Welcome to the HP Forums!

  I understand that you want to change the language on your Deskjet 3070, and I'd be happy to help you!

  To reset the country / the la langue language of the printer, please go through the following:

  1.) click on the key icon on the front panel

  2.) tap the arrow down ( ) to select the "language" and then press on "'Bueno". " Click on " ""Bueno"again

  This document can be found at http://support.hp.com/us-en/document/c03246199

  If you are still not able to change the language on the front panel after this reset, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  I hope this helps!

  Concerning

• Printer HP Deskjet 3070 all-in-One - the IP address will not save

  Hello

  When I connect my printer to all-in-one HP Deskjet 3070 - B611a and try and update the IP address manually, it says it is in place and I press ok but nothing happen need me just indented on the same page but with the address IP is entered.

  The same things happen when I try the wizard he fines the Wifi network and accepts the wifi key tells me im change network, but then after that just takes me back to the first page of the wizard as nothing has happened.

  Almost as if it won't save or flash memory.

  Please help someone.

  Thank you

  Bryan

  Hello Odbod22

  By turning the printer power switch will usually change the IP address, unless make you it static or unchangable. The reason for routers use a protocol called DHCP that tells it how to distribute IP addresses. So, it is not uncommon that address to change. To avoid this, you must assign a static IP address on the printer.

  To do so follow the link below and search for "Step 6" how to set a static IP address.

  Printer keeps no connection Wi - Fi

• HP Deskjet 3070 with mac OSX 10.9.1

  Hi, I'm a mac user and have just updated my system to the latest OSX 10.9.1.

  When I try to reinstall my printer from the disk driver, it says it does not support the latest mac system.

  So I scoured the HP support site and follow everystep to reinstall my printer, a HP Deskjet 3070 (its got this model name on the machine).

  When I click in the preference\Printers & Scanners\ (+ new printer) on my system.

  The only printer in my machine can detect (wireless) is "Deskjet 3070 B611 series [80AA1E] | "Hello multifunction", which I ' m do not know if it is equal to the '3070 A Deskjet '. After login, only the print function works well (lack even the borderless printing option) but this isn't the scan function. When I press on "Scan", either in the Panel of breeding stock & Scanners or image capture, a screen says 'Software for this device is not installed' bulging Dungeon. He asked me to contact HP for the latest version of the software. I wonder if there is no object, I can do for my all-in-one printer works as it was, particularly the sweep feature, pleaes help.

  Hello

  It's your printer indeed.

  When you add the printer, try to change the menu dropdown use the printer rather model the AirPrint option by default, then try scanning using the supplied client software as shown below:

  http://support.HP.com/us-en/document/c03967506

  If you are still unable to scan restart your Mac and then try to scan the image.

  If the same thing happens again, try to install the update below and check any changes:

  support.Apple.com/kb/dl907

  Kind regards

  Shlomi

• ePrint does not-Deskjet 3070

  I'm having a lot of trouble to do my printer doesn't work on the side things eprint.

  The IP address is the same on my router/printer/HP eprint website, so I don't know what's wrong.

  My printer is back with "the printer could not connect to the internet. Check the Internet connection.

  The wireless aspect works very well.

  Ubuntu 11.10/HP Deskjet 3070/Virgin Supehub

  Kubuntu 14.04LTS / Photosmart D5460 / 3070 Deskjet / Officejet 4630 / LibreOffice Version: 4.2.7.2 Build ID: 420 m 0 (Build:2) / Netgear WNR2200 / Virgin Media SuperHub 2

  Hi pooky2483,
  
  (On your printer) Reconnect the printer to the network by running the Wireless Setup Wizard and try to restart the web services. If this is not enough, you may need to change some settings of DNS in the EWS (built-in web server) printers
  * To do this, put the IP address in a browser window on your PC.
  
  This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.
  
  Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.
  
  Now try to connect to Web Services again.

• DeskJet 3070

  Hi all, my Deskjet 3070 has stopped printing via ePrint, "internal error." I changed from a dynamic address to a static address and now ePrint is completely disabled. have uninstalled and reinstalled the drivers but it still picked the static address.

  Question: How can I return to a dynamic address and try again.

  Thank you very much

  Dave

  Hello

  Proceed as follows to reset the wireless information.

  Menu Setup > wireless settings > Restore Defaults > Yes

• HP deskjet 3070: problems with connection to internet writer

  could someone tell me how to get my burner to connect to internet when I moved. the writer does not recognize the internet here.

  Hello

  From the control panel select devices and printers, right-click and delete any which instance of the printer.

  Then click the icon on the installation or the pritner wireless > Wireless, default restoration, the network and restart the printer.

  Noah open the HP Deskjet 3070 software and select Connect a new printer, follow these steps to reconfigure the wireless connection.

  Note: a temporary USB connection may be necessary to transfer the new settings of the printer, the installation invites you to insert such an if necessary.

  Shlomi