Reports of the dashboard will not align left

Similar Questions

• text of the column will not align

  Simple question: I can't align text in colomns. I don't know why and how. Can someone help me with a step by step?

  See also joint image.

  Thanks a lot if you can help!

  You are in the right place. I don't know what are your margin settings, so I probably just set the grid from 0 relative to: superior the margin, and then set the increment value to the same value you're using for leader in this text. If you got the head set to Auto, then the default value will be 120% of the size, for example, 12 pt type with automatic line spacing would have need of a grid increment each 14.4 pts.

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My laptop sees my Xbox 360, but the 360 will not connect to the top of the Tower

  I have a crossover ethernet cable

  I tried everything, but the 360 will not find the network,

  It saying that he "cannot obtain an IP address form the router or modem.

  Your router or modem can be automatically assigns an ip address, you can try a static IP address instead

  
  

  DHCP Server IP address form

  
  

  Help please

  
  

  
  

  Hey tons-of-pleasure-101.

  You can set a static IP address on the Xbox 360 by going to network settings and then manually enter an IP address.
   
  (1) type cmd in the start search field.

  (2) type ipconfig/all in this window, and then press the Enter key. This will display a lot of information.

  3) take down of the IP address, subnet mask, default gateway, and name servers. Be sure to note which is which.

  (4) type exit in this window, and then press the Enter key to close.

  (5) once more, open the start menu. This time, click on Control Panel.

  6) click view the status of network and tasks.

  (7) select the settings of map on the left side of your screen.

  (8) make a right click on your network adapter and choose Properties to open the properties of this internet connection window.

  9) click Protocol Internet Version 4 (TCP/IPv4), and then the properties button.

  Until you make changes, write down the settings you see on this page. If something is wrong you can always change the settings back to what they were! You should see a point in the obtain an IP address automatically box.

  (10) choose an IP address and type in the IP address box. The ip address that you choose should be very similar to the ip address of the router. Only the last number of the ip address must be different.

  (11) put the previously found in section mask subnet mask subnet. The default gateway should enter in the default gateway box. Enter the dns servers we prevoiusly found in the two zones on the DNS server. Completely out of this menu, click OK.

  That's all you should be done.

  Once done, you must assign a static ip address for your xbox as well.
  When you're done, between the two, the only parameter that must be different is the actual IP address. The gateway and subnet mask must be the same on your XBOX and PC LAN connection.

  Refer to this:

  Can not get an IP address from your router or modem
  http://support.Xbox.com/support/en/us/NXE/xboxlive/troubleshooting/NetworkHelp_dynip.aspx

  This should be it.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• Want 5530 printer will not align properly

  Hello

  I had to change my black cartridge in my printer HP Envy 5530.  Alignment printed document, I noticed that the color cartridge should also be replaced if I interrupted the process (this may have been a bad idea) and installed a new color cartridge.  When the process is restarted, correct alignment of printed document, but when I put it on the glass in order to complete the process, alignment failed.  It appeared that the document could not be read, and I received a message about the configuration of the cartridges to 'default' all that meant.

  Then I went to copy a document (in black) and, to my surprise, it came out white.  It seemed that the alignment document could not be read.  I thought that the scanner have been damaged, but I was able to scan documents.  I was able to print, but the quality was poor.

  I tried the following without result:

  1 removed the cartridges and Redid the alignment process.

  2 unplug the printer and Redid the alignment process.

  3. reinstall the printer.

  4 Ran own process of heads and repeat the alignment.

  5 etc.

  I discover that the system copy so I used the color option.

  I'd appreciate the help.

  Thank you.

  Badger66

  Hello Badger66,

  Welcome to the HP Forums!

  I understand that your craving for 5530 will not align correctly. I will do my best to help you! I want to thank you for providing such a detailed post. Please make sure that the printer is connected to a live wall, not a surge protector. Then, please follow these steps in order:

  Remove all printer ink cartridges, and then close the door
  Remove the power cord from the printer (do not press the power button)
  Wait for 60 seconds or more, then reconnect the power cord to the
  Wait for the printer to turn completely, and then install ink cartridges
  Try printing another alignment

  Please let me know if this page has been accepted or not. I will seek forward to hearing from you.

  Have a good night!

• My HP 2410 printer will not align.

  Printer will not align. Error message States. No more paper. Then the printer jam. Then print canceled., but the printer prints a job and test print page. All other withdraws. I can't copy or fax until the print head. Help, please. Candih

  Eleanor that rock you!

• How to open a document illustraor silently, so that the user will not see it

  Hi all

  I work with Illustrator CS5 and you want to import a picture (files HAVE) documents Illustrator in another document. When I tried event file-> place work file converted to pdf object. Are there other ways to import the work as it is in another file.

  A work around is: to open files in Illustrator, copy content to the Clipboard, paste it into the desired document layer, close document.

  But I need to open these documents in silent mode so that the user will not see them. Is there a method to open the illustrator silently files?

  Please report a solution or any suggestions would be welcome.

  Thanks in advance.

  
  D.

  Ok. To open a document in your own format in silent mode, you register your file using AIFileFormatSuite::AddFileFormat format. Then in the GoFileFormat Manager, you treat the document, and then return an error code, e.g. kBadParameter. The document never appears and Illustrator shows no error, but you treated the file data. You then extend this technique to work with the files have.

• Unable to show BIPub report in the dashboard by Non-administrative users

  Hi all
  
  I've created a report BI Publisher and even added to the dashboard, I can see it as administrator but unable to see as all other users.
  
  I have updated the privileges in BI presentation services and gave permission to anyone to BI Publisher:
  
  
  Oracle BI Publisher Enterprise
  Add reports to the dashboard - everyone BI Publisher
  View the BI Publisher - all reports
  Plan the BI Publisher - all reports
  Send the BI Publisher - all reports
  Create reports to BI Publisher - all
  Analyze the BI Publisher - all reports
  
  but users still get the below error:
  The error message is:
  "Unauthorised access: please contact the administrator '.
  
  
  Any help is greatly appreciated.
  Concerning

  Hello
  We see these groups at the level of the RPD. Just assign userA to the Group Non-admin + XMLP_groups

  If you don't see not those of RPD add these groups

  Thank you
  saichand.v

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

  iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

  In-app music, press the "mini player" (the narrow ribbon at the bottom showing the song that is playing).  Which opens upward from the view of work full screen of the song being played - down at the bottom of this screen are icons for shuffle and repeat, press Repeat until the gray background disappears.

• trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?

  trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?

  See if this helps:-

  http://www.ComputerActive.co.UK/CA/download-review/2040736/remove-unwanted-software-Revo-Uninstaller-19

  If she please vote as helpful.

  I use the software that you want to remove and would recommend not removing it because 2 times last year he picked up the items that Microsoft Security Essentials does not.

• Account of Hotmail, when I connect to the page will not download?

  Once I connect to the page will not download?

  Hello

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  -------------------------------

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.