* Reproductible Bug *-don't break until you restart

Similar Questions

• Windows 7 problems with gel applications, programs stop working until you restart

  Windows 7 is a stupid IDEA! . Since then, I have installed windows 7 64-bit on my 64-bit machine. I had problems. Programs to decide that they will not open until I restart. IE and Firefox both freeze when all Web sites are trying to load a video. Also other programs will just stop working and turn off while they don't reopen until I restart again. I installed 7 as an upgrade not a clean install, I'm not sure how to go about backup up files for that. I'm also extremely ready to roll back to Vista, I have not had ANY problems with him. I am also about to throw my laptop through a wall with windows 7 and microsoft. Thank you for another piece of trash! (and headaches). With all that money, you would think they can actually DO SOMETHING RIGHT!. I have now lost $120 on garbage, might as well use windows 7 CD as a Brawler of ice this winter.

  PS everyone has ideas?

  TechBuff48

  Rants are part of the dealing with technology. As long as they are against the technical and personal equipment no technical, I think we've all been there. Ironically, two days after my message praising Win7, I had a spontaneous reboot that seems to be associated with a known issue with the sensitivity of kernel-power. I was able to reproduce twice, so I think I have a work around until the bug is addressed.

  OK, back on topic. If you have a version to the retail/TMC, you should be able to perform a clean installation with the option to format the drive; then, the fun of reloading everything from scratch and to restore from a backup. I'm not promoting a particular site, but this one

  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  or
  http://community.winsupersite.com/blogs/Paul/archive/2009/10/23/clean-install-Windows-7-with-upgrade-media-the-answer.aspx
  or
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html
  or
  http://answers.Yahoo.com/question/index?QID=20091022164612AAAJ4kM

  There are also other tools available to start from a CD or a DVD and then format the drive in NTFS, reinstall it from scratch. But you must have a DVD very convenient for loading eligible upgrade then Win 7.

  Good luck!

  MisterWeather

• Satellite M60-132 - USB stops working until you restart

  My problem looks like this:

  All USB ports die after a few minutes (time may vary, but is shortened recently) after the start. They give no error - the USB mouse stops responding, the USB drive gives stops giving "delayed write failure" or sth like that. They are all visible and OK in device (Windows XP) Manager, no problem not being reported here. They have just stop working. I tried to reinstall Windows. It is not dependent on the OS actually. For example, I can boot from a live CD of SuSe Linux and ports will also die after a few minutes - they do on any OS tested.

  Now, I have discovered (GOOGLE usb ports stops working until the reboot) that several Satellite M60 users report this problem with their old cell phones. Exactly the same thing - ports die after a certain time of start and remain that way until you restart. In one case the user writes that he bought a cardbus PCMCIA USB controller and the problem continues - the ports of the controller when dying as well as embedded.

  My idea is to try even when the PCMCIA - maybe it will work in my case (another chip etc - you have never know). And anothr one must try to connect a USB hub to the Firewire port available. There are USB to Firewire Converter cards - could work like that?

  Anyone know any solution to my problem or have an opinion on my ideas? I am looking to buy a new laptop, which I can't really afford right now...

  Hello

  To be honest I've ever read on these problems on the Satellite M60, but it can happen from time to time, because it of also a fairly old laptop.

  My friend also uses a PCMCIA card that has USB ports on his old notebook. He is quite satisfied with this solution because it don t need to each time the USB ports. Just sometimes if he's copying files on USB.
  These cards are cheap, you can get it for a few s Euro and you can buy this card where you want, for example Amazon.co.uk.

  I never heard firewire to USB ports, which is new to me and I n t have experience with this.

  Welcome them

• iOS 10 video playback stops working until you restart

  I have an iPad Mini retina, and since the upgrade to iOS 10.0.01, a short period of use causes videos to stop working.

  Videos in Safari, Chrome, YouTube etc. appear in the cache (saturated with progress on the top bar), but no response to play. The first image of a video appears, but only in the form of static image. I am able to change the static image displayed by rubbing them at any point in the video, but playback will not occur.

  The only thing that allows video playback is again restart the device (apps force closing, locking and unlocking etc. doesn't help).

  Hello, Sunkai!

  Thank you for using communities Support from Apple. I understand from your post that you're having trouble playing videos on your iPad mini; the video will start but will be stuck as a single image, as if the buffering and never take back (at least until you restart). I mainly use my iPad for watching videos, so I know it's important that they play in fact; I'm happy to help you!

  I have some troubleshooting I can offer to you. Before you begin, create a backup of your iPad using iCloud or iTunes, following the instructions here: How to back up your iPad, iPhone or iPod touch

  Once you have your backup, try the following steps, in order. A video test after each step and will stop when the problem is resolved.

  1. Make sure your iOS software is up-to-date. In the last week, iOS 10.0.2 came out. Use the following article to get help update: update the iOS on iPhone, iPad, or iPod touch software
  2. If this happens on a Wi - Fi connection, try restarting the network you are using from the router or the modem (if possible). If it is a private (for example, your home network) WiFi network, try to remove all the devices on the network, then by simply adding your iPad in return.
  3. Try a different network.
  4. Reset the network settings on your iPad under settings > general > reset > reset network settings. This will affect all personal data (like your photos, contacts, calendar of events, etc.) but it will remove saved passwords, and Wi - Fi networks one previously used settings APN or VPN and all paired Bluetooth device.
  5. Restore your iPad settings, following the steps described here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure the iPad as a new device (i.e. without using the backup that you created earlier, at least temporarily). You can sign in iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID test then a video.

     If the problem is resolved, you can restore your backup by the information here: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• NVIDIA GeForce GT 220 M this device cannot work properly until you restart your computer. (Code 14)

  NVIDIA GeForce GT 220M
  This device cannot work properly until you restart your computer. (Code 14)

  Click on reboot to restart your computer

  The restart does not solve their same message reappears.

  Have you tried reinstalling the drivers from here? (they can be more recent)
  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-gt-220/

  I hope this helps.

• PC disconnects the VPN after several hours, can not reconnect until you restart the PC.

  Hello

  I started to use a VPN private for a video game in general since last month, but I started to run into a problem, I can't fix... my PC tends to disconnect the VPN after awhile (6 ~ 12 hours of use?) and I can't reconnect to any VPN until I restart my PC.

  However... my normal internet connection seems to work very well.

  When I try to reconnect to the VPN after I fell, I'm greeted by this error:
  http://PUU.sh/bicqT/0a6f1f8537.PNG

  I'm on Windows 7 64 bit and I use the VPN client by default windows... idk what's his name, it's putting you in the network and sharing Center.

  I tried the following things:
  * restart the network map
  diagnose the issue with windows network diagnostics 7
  * / Clear DNS cache
  * / release and / renew lease
  * reset the internet connection
  * using the internet connection of a neighbor and I am still unable to connect to any VPN until you restart the PC.

  -diagnosis after disconnecting from the VPN wireless adapter arrives leads to this...
  http://PUU.sh/bibQs/9873c02068.PNG
  http://PUU.sh/bibn7/93ec6f0934.PNG
  http://PUU.sh/biboF/3c9f865f15.PNG
  http://PUU.sh/bibpw/b204c59f01.PNG
  http://PUU.sh/bibq9/a10d3246d1.PNG

  I can't fix it through diagnostics.

  In any case, this is a problem on my end because I share the VPN with 2 other friends and they do not suffer this problem... > _

  If there is a lack of information, please tell me and I will provide.

  Thanks for any help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• Screen flat HP Compaq THE 1711 worked until you restart Windows 7

  Original title: to a lost need help

  I have a hp laptop g72-227wm with windows 7 Home Edition premium my lcd screen is broken so I started using a hp compaq le1711 flat plug 'n play screen worked fine pluged in and the pc installed the driver so that its flat screen name everything worked good until I restarted a day now , I don't know what happens when I turn the pc at the time of its entry on can hear the fan turning when it frist starts, then it gets exit the f12 key again its built you in wireless when I press the power botton on the CAP lock number and wireless light lights upward and then the cover turns off lock and two other stays on f4 is the key which must pass my screens back ive tried to turn the pc off all her unplug printer usb, power cord pulled out the dough and held the botton of power during 15 dry his should do a hard reset that I got support on hp iv tried all the shortcut key that I could find that I thought would help the Ive tried to do a fortory reinstall with the s of CD that came with it I have nothing on the pc I have need of lucky 3 days be because I took every thing and put it to hard drive extal. evil take all the help I can get thanks for your time in this matter

  Hi, JGHippie,

  You are able to open the event viewer and look for error messages?

  Post back verbatim with the event ID impossible

  Try to use this combination of keys FN + F5

  How old is the computer?  It is still under warranty?

  Check these support Docs

  Here

  Or, connect a monitor, projector or a TV (Windows 7)

• Waiting for resources to be valid until you restart the blackberry is over.

  I need to wait for resources, start the blackberry is over.

  Is there a direct method by which I can wait my code to run until blackberry restart is complete.

  Welcome on the support forums.

  You can use the following code to check if the device is still in startup:

  ApplicationManager app = ApplicationManager.getApplicationManager();
          while (app.inStartup()) {
              try {
              // wait until the startup process completes
                  Thread.sleep(400);
              } catch (InterruptedException e) {
              }
          }
  

• Edge 13 and earn 8.1. : Wirless functional until you restart, then off.

  Dear Lenovo-community,

  I experience the strange behaviour of my 13 edge with Windows 8.1. I did a clean install of the operating system and that no other drivers are available, installed the WiFi Driver Win7 version. I restarted the computer and WiFi works as before. However, once I restart the WiFi adapter disappears from the network and sharing options and my Device Manager always tells me that the "device could not start. Reinstall the driver get Wirless, until I restart again.

  I guess this might have something to do with physics deactivaction. Only that my wireless button (on the edge it is F9) doesn't seem to work on Win 8.1.

  Any help is very appreciated.

  Best,

  shkelda

  Reload the default BIOS resolved the issue.

• Satellite Pro L300 WiFi continues to drop and doesn't reconnect until you restart

  Hi, I have a Satellite Pro L300, number of model PSLB9E - 00G007EN running windows Vista professional.

  Recently I started trying to connect to my wifi at home instead of using the ethernet cable.

  Research shows my home network and then I connect with the password, everything all right at this stage, sometimes an hour, sometimes for 10 minutes and then the connection disappears. When I try and re-connect it does not find any wifi network, but I have not moved from where I was when I was connected. I have I-phones, etc. and another laptop running windows 8 connected wireless, and there is no problem with any other machine, just my toshiba!

  Sometimes if I turn off the wifi using the switch at the front and then put it again which solves it, but once again only for another 10/20 or 30 minutes. Sometimes even that does not work and I have to restart the machine to find the network! It works, but once again for a limited period until he gave up the connection and it disappears again, back to square one.

  I even tried to take this work and connect to the wi - fi, but still exactly the same thing happens, so I think I can rule out problems with my home network / router.

  I'm not very good with computers, but have managed to check if the driver is up-to-date, etc., and all appear here... Help, please!

  Post edited by: ANDY2807

  I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter

  The driver version is: 6.1162.610.2009

  My Windows Vista Business 64-bit is by the way

  > I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter
  Yes, you are right, the laptop seems to be equipped with the Realtek RTL8187B WLan card.
  This wireless network card supports 802.11 B and G standard.

  First update the WLan driver.
  Here you can find the latest WLan drivers available on the Realtek page:
  [Driver Realtek RTL8187 WLan: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=40&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  This driver is for Win XP / Vista / Win 7

  In the event that the issue will not be resolved, go to the Device Manager.
  Choose the WLan card-> properties and go to the Advanced tab
  Here, choose either the 802 standard. 11 B or G. This setting depends on the settings of your router. If your router supports 802. 11 G, you must choose G

• Printing to shared HP 1020 on the machine XP Windows 7 will not be printed until you restart

  I have a HP 1020 printer on a windows XP x 86 machine that prints well locally.  However, I shared it with a 64-bit Windows 7 computer.  Printing from the Windows 7 machine will not print until the XP machine is restarted.  I have updated the drivers on both machines.  How to solve this?  Thank you

  Hi countrytechie,

  Method 1: Run the printer Troubleshooter and check.

  Open the printer Troubleshooter

  Method 2: You can follow the steps mentioned in the article below

  You cannot print to printers shared from Windows 7

  Method 3: Follow the steps mentioned in the link below

  I can't print to a network printer.

  (Link applies to Windows Vista, not valid for Windows 7)

• OpenManage 7.4.0 do not pick up disk failure or removal until you restart

  Hello
  I've been rebuild a Dell T310 customers with new 4 x 450 GB SAS Raid 10, using his H200 raid card and that you have installed Windows HyperV 2012R2.

  All software packages, drivers, and software have been installed and updated, and I began to test my OMSA DellAlert.ps1 script for notification by e-mail.

  I decided to get one of the 4 drives to test the notification, but OMSA has not detected any withdrawal from disk! Very disturbing! I left that he unplugged for 9 hours and always OMSA showed 4 discs online. Even refreshing the OMSA browser, or closing and reopening the browser has not changed anything. Only when I reboot the server it then shows a disc had been removed and my script notified E-mail me this.

  I pushed the disc in and again 3 hours later OMSA has yet to show that nothing has changed. Discs 3 and 4 activity watch as they rebuild but if OMSA is not displayed any changes how I'm destined to receive alerts to show when a disk has failed and raid has deteriorated.

  I can't put this server back in my client until this issue is resolved. Has anyone seen or had this problem before? Any help would be grateful. I guess my next step will be decommissioning OMSA and firmware etc or reconstitution with 2012 HyperV server test.

  Update 1 - if I stop and restart the Server Administrator service and DSM SA Data Manager then the notification comes through and loggin in the OMSA shows the missing disk.
  The LCD on the server changes to orange as soon as the disk is pulled so the underlying hardware seems to work ok, it just seems to be the OMSA 7.4.0 2012R2 HyperV software.

  Update 2 - I've upgraded OMSA to 7.4.0.1 and nothing has changed. I noticed that the show OMSA Embedded System Management (ESM) logs MAKE a disk has been deleted or inserted, but the section alerts and all other areas of the OMSA show no changes until the services are restarted or rebooted Server!

  Fix possible update 3 - I reinstalled a copy eval 2012R2 with a graphical interface to see if that fixed it but it was always the same questions. My only solution seems to be 7.4.0 uninstall and install OMSA 7.3.0. I now put my HyperV 2012R2 system on and confirm that the 7.3.0 works as well for her.

  Thank you

  Dave

  Name Slot ID State Firmware Version driver Storport Version

  PERC H200 Adapter PCI Slot 1 07.03.06.00 ready 6.3.9600.17122

  David

  Thanks for the update and all the information.

  Our engineering has checked this issue. 7.4 OMSA does not properly report status on the H200 and SAS 6/ir changes. This affects programs such as OpenManage Essentials and OpenManage for VMware Vcenter integration using OMSA to monitor servers.

  A fix is planned with OMSA 7.4.0.2

  Thank you

• Windows 7 slow until you restart - restart does not solve the problem

  We have two windows 7 PC, both with Visual Studio development and not much more and both of these PC regularly go slowly - and I mean really slow down - so that VS takes anything up to 10 minutes to load. Other programs loading is too slow (for example, performance monitor take about the same to load). It makes no difference if I restart the PC, but is cured if I turned off and reboot the PC (which means safe mode will work fine, as I have to shut down the PC to do this).

  That happened during the last 6 months or so (don't know exactly if cannot go back and see what has been installed or updated) and becomes a pain, especially on the weekend when there no one in the Office for the power of the PC if I remotely close.

  The fact that it does not cure the problem, but did a restart and goes on two PC, means that there is a common element on each PC that is not reset by restarting, or that is external to the PCs but is reset when turned off (for example, a physical network connection).

  The problem is that I don't know where to begin to fix this - I tried to disable things, but this makes no difference - and some ideas of what it could be, or a way to identify where the problem would be greatly appreciated.

  Thank you very much

  Neil

  Hello

  Your computer is connected to a domain network?

  If your computer is connected to the domain network then, please follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  And if your computer is not connected to a domain network and then, try to open the link below to fix the slow performance.

  Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Note: If bad sectors are found on the hard drive when disk cleanup is trying to repair this area if all available on which data may be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• seeing cRIO of State flashes 4 times, but the prog works well until you restart cRIO

  I have a cRIO 9073 with a significant program in RT and FPGA, using a front-end for Windows communicating using the network of shared on the cRIO variables.  Great short program if I simply deploy the RT VI main (with of course built FPGA code), or if I deploy the RT version.  However, if I select 'run as starting", works to deploy on the main façade of RT VI opens and I see activity (it works very well), but then I click to restart the cRIO, and the cRIO restarts only to run for a second or two before the status light blinks 4 times (soft error).

  I doubt it's a problem of memory as suggested by the manual as if it were the case, I expect the deployed application would fail as well, but it works very well.  I have check the fault log and see nothing useful.  I see also on the deployment of the cRIO dialog box has ~ 12 MB free after the deployment, if I deploy against a target with the "NOR-RIO 3.6.0" software - January 2011, and further if I use a minimum package with additional components, I need (network engine Variable and editor of State system).

  It was a project of years which worked beautifully and recently required change.  In the meantime, my development PC has been updated with Windows 7 64 bit.  I am running LabVIEW 2010 SP1 Professional Development System with RT and FPGA packages.  CPU utilization on the cRIO when I run the deployed application (with the cover available for diagnostics) is about 20%.

  Any suggestions?

  Thank you

  Erik

  I found my problem, and it was mine and not Windows.

  I ended up using the Console output for help and saw Exception Code 6 (0 x 00000006) appear on the console, ultimately ending with Safe Mode - software in Max error message unfortunately, I can't find anything looking for this exception code, so I went back and looked at my VI in real-time , and I found my problem: I had added two new network static Variables (NSV) and had not fixed the reference to the Relative target Mode. I have so many DRVS in this VI that I had not also wired their outputs error to an indicator for troubleshooting.  Since I have it, but even that resulting in still mode safe, if I have returned the absolute reference Mode.

  I suspect that the VI has run in interactive mode, as the project was the IP address of the cRIO set when the RT build was made and later failed, because the IP address changed when the cRIO was on the network.  Oddly, I had a lot more luck for the cRIO to run in mode interactive (then disconnect from it) if my PC and the cRIO were connected by a crossover cable, and both have been using link-local addressing.  In this way, I could get my project running every time.  When I later tried connecting via the network, it is when same interactive mode would fail most of the time.

  Unfortunately, a mini-project, I created to test this situation was not the issue - it could not run (if I built the RT build by setting the IP address of the target to an imaginary device) or ran very well (if I put the address IP target correctly prior to construction), but never caused the cRIO enter Safe Mode.

  What I want to know is, can be an option somewhere to make all default DRVS for the target Relative to the reference Mode?  I have not yet used an intentionally used this absolute addressing.  I also recommend to the reference on the NSV Mode indicator something more obvious than a tiny symbol OR in the lower left corner.

  Thank you

  Erik

  P.S. I created a support for this request and the console log provided to support engineer if this is useful.

• Wireless password offline then computer restart, that kb871122 fix it until you restart

  terminololgy help

  I use a Dell with XP pro laptop and I was directed to the article 871122 # where I used a function fixit to fix my wifi.  Knowledge of the problem is that when the device is restarted, it disconnects.

  In the suggested solution for me, I'm supposed to "check the startup folder and make sure that a Wireless Utility vendors is not"kicking"and disable the Utility (WZC) Windows each time you start the computer.  How can I access the startup folder and how to recognize this utility?

  Thank you

  Hello

  It might help to handle the startup, http://www.ezlan.net/infestation.html#startup

  With regard to the util wireless provider. Each provider uses its own system, I know that your using.

  If there is a wireless icon in the TaryBar which is not WZC start here and take the connecting path.

  Otherwise look to Dell support, he could be mentioned there.

  http://support.Dell.com/support/eDOCS/network/p70008/en/utility.htm