Request failed to build on call Excel.Print report

Similar Questions

• Build request failed with the message: error: ENOENT, untie

  I use emulator ripple to package the application for Blackberry os 7...
  But when I press the button package it gives me error as follows:

  Oh, Snap! Build request failed with the message: error: ENOENT, remove the link "C:\Documents and Settings\AtikJ\RippleSites\AgriQuote\packaged\AgriQuoteApp.zip".

  Duplicate of:
  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/error-while-packaging-the-app-us...

• Oh, Snap! Build request failed with the message: [ERROR] CAP exception has occurred

  Hello. Pls I just got the error "Oh Snap!" "Build request failed with the message: [ERROR] CAP exception occurred" when I tried a test package ' Helloworld ' procedure follwing illustrated app on "http://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html."

  I need your help pls.

  Hello!

  Thank you for your response. I uninstalled "jdk-7u25-windows-i58" and got 'jdk-6u35-windows-i586', and his work well at the moment. I hope that I have no problem to use an older version.

• Error of the ripple: Oh Snap! Build request failed with the message: CreateProcessW

  Hello

  I installed the Mobile Emulator 0.9.1 ripple with SDK for Tablet 2.2.0.5 WebWorks, following the instructions exacly on a Windows 7 64-bit machine.

  If I try to package virtually any application (HelloWorld, weather, examples, something more complex, whatever), I get the following error:

  Oh Snap! Build request failed with message: CreateProcessW: The system cannot find the file specified.
  

  I tried a lot of things. I'm guessing that it's a mistake with the SDK, since I can enter any path to any folder that exists on my HD as the path to the SDK and I get the same error.

  Path SDK: SDK for Tablet 2.2.0.5 WebWorks c:\RIM\BlackBerry

  The project root: c:\Users\Username\RippleSites\AppName

  Archive name: AppName

  Output folder: c:\

  I tried different paths for the foregoing, moving my code and by reinstalling the SDK.

  I'm at my wits end - about to renounce WebWorks.  Any ideas? 

  

  It seems %SystemRoot%/system32 and any % were missing from my path variable. All good - too bad!

  Land

• Build request failed with the message: helloWorld/Dokumente / is not a valid path

  Hello

  Unfortunately ripple does not work under Windows 7, so I tried on Mac. On Mac, I have the following parameters in the ripple:
  SDK path: / Developer/SDKs/Research in Motion/BlackBerry WebWorks SDK 2.3.1.5
  The project root: / Dokumente/helloWorld
  Archive name: helloWorld
  Output folder: / Dokumente/BlackBerryOutput

  There is the file config.xml and index.html file in the helloWorld file

  I have for this site:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/creating_an_app_1885567_1...

  When I try to pack in ripple, I get:
  Build request failed with the message: helloWorld/Dokumente / is not a valid path

  There is a message ' no simulators found "on the bottom of the settings, too." '

  I tried different paths, one of my localhost in Apache, but nothing works. What's wrong??

  Well, the path was not "consistent". I hate the f... Mac: / Users/Valentina/Documents/helloWorld to the project root and/Users/Valentina/Documents/BlackBerryOutput was necessary.

  Just in case somebody stumbles on the same problem.

• Ripple packaging error: Oh, Snap! Build request failed with the message: zip i/o error: no zip file or directory error: could not create output file

  I am trying to package and sign an application with ripple and I get this error: Oh, Snap! Build request failed with the message: zip i/o error: no zip file or directory error: could not create output file

  What can possibly be the problem here?

  Solved!

  I had the field output folder of the same value as the name of the archive

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!

• Writing PNG file failed when build exe, but operate normally on the development platform

  See photo below, it is used to call WinAPI for screenshot and then save it in PNG file. This Vi operate normally on the flatform of development, but it failed when building the application .exe file. The pop-up dialog error 'chain of illegal path, OS', but it is clear that the path is correct. Note: run the same PC with Win XP.

  

  Update:

  I found the reason, but not a solution. In fact, the Clipboard.Get Image does not work when building application exe. But it's the private node invoke, impossible to get support of NOR.

  It seems to be to the node to invoke public on the version of LabVIEW 2012, which can help you check on LV2012 version? Thank you very much.

• PIXMA MX340 Windows 10 device descriptor request failed Code 43

  Hello.  I recently bought a new computer to office 810 - QE HP Envy Phoenix yesterday.

  The first thing I did was to finish the free update on a clean slate ("save anything") of Windows for Windows Professional 10, 64-bit edition 8.1.

  The specifications of the system are:

  32 GB RAM DDR3
  3 TB hard drive 7 200 RPM SATA
  Integrated Realtek / Beats Audio
  Processor Intel Core i7-4790 3.6 GHz 4 hearts

  NVIDIA GeForce GTX 745 4 GB DDR3 video card

  My Canon Pixma MX 340 multifunction printer is not able to be recognized by this new system.  I installed the software and drivers for the printer, however, Device Manager keeps telling me that this printer is a "unknown USB device: device descriptor request failed, code 43"  I also tried to download the latest drivers directly from Canon specifically list of compatibility with Windows 10, which did not help me at all because the drivers are not able to find the printer during the installation.

  I had originally this printer connected to one of the USB ports 3.0 at the back of the system, but I have also tried using this printer with the USB 2.0 ports, as my old system had USB 2.0.  No change, it still gives the same exact error.  I also tried this printer connected directly to the USB 3.0 and USB 2.0 ports on my computer without effect before.

  I checked to see if this printer is "compatible" with 10 windows, and according to the compatibility of Microsoft website, it says that the Pixma MX340 should compatible.

  Advice, tips or suggestions would be very appreciated.  Thank you.

  I FOUND THE PROBLEM.

  I forgot that not only I used an extension USB cable, but I was also with a long USB cable and the USB extension as well.  This long USB cable was the culprit!

  I just noticed this and decided to test it.  With the long USB cable, I get the error. But when going back to a standard length cable, the printer was correctly as a Canon MX340!

  If I switch back to the long cable, it will be impossible to find.

  However, I can still use the USB extension cable.  This cable does not cause a conflict any!

• Error = the Code signing request failed

  I'm trying to sign my application of webbworks for the playbook, but I cannot, here is the process of me, packaging and then try to sign. I can install non signed bar file fine but I can't seem to sign.

  "/ Users/mike/projects/blackberry playbook sdk/bbwp/bbwp" $build_folder "/ build.zip" ""

  [INFO]       Parsing of the command line options

  [INFO]       Bbwp.properties analysis

  [INFO]       Validation of archive WebWorks

  [INFO]       The analysis of config.xml

  [WARNING]    Cannot find an element of

  [INFO]       The application of filling source

  [INFO]       Compiling applications WebWorks

  [INFO]       Packaging of the record bar

  [INFO]       Bar complete packaging

  [INFO]       Packaging applications complete WebWorks

  "/ Users/mike/projects/blackberry playbook sdk/bbwp/blackberry-tablets-sdk/bin/blackberry-sign"-verbose - cskpass pass - keystore "/ users/mike/projects/blackberry playbook sdk/bbwp/bin/sigtool.p12"-storepass pass "$build_folder"/bin/build.bar RDK.

  TBS = developer certificate

  30 81 a0 c5 03 02 01 02 02 04 4 a3 82 99 30 0c d

  > barsigner error: Server error: Code signing request failed because this file was previously signed.

  This can be caused by trying to sign the same version of the application.  Try incrementing the value of the version property in your config.xml file (or use the command line parameter - buildId) and sign again.

• Error when creating a Web Service reference. ORA-29273: HTTP request failed ORA-12535: TNS:operation expired

  I have a need to call a web service from an APEX application, so I thought I'd try to experience everything first call a web service that is accessible to the public from W3Schools.  The URL of the WSDL that I use is:

  http://www.w3schools.com/webservices/TempConvert.asmx?WSDL

  The 1st thing I try in APEX is to create a Web Service based on the above URL reference.  Problem is that I get the following error:

  ORA-29273: HTTP request failed ORA-12535: TNS:operation expired

  Any ideas?

  I even tried with some other URL WSDL and always the same exact error.

  Thanks in advance.

  Hello

  Maybe your database server have firewall that blocks to internet connection?

  Kind regards
  Jari

• Unhandled exception in AXFCustom.launch_command_soap SQLCODE =-29273: ORA-29273: HTTP request failed error when clicking on the EBS Zoom button

  Hello

  I use Oracle EBS, whenever I click on the Zoom button I get the error at the bottom of the page below.

  Unhandled exception in AXFCustom.launch_command_soap SQLCODE =-29273: ORA-29273: HTTP request failed

  When I checked the master.log file I see the error log entry below.

  < SNIP >

  path Wallet AXFCustom.launch_command_soap = file:/u020/dba/wci-wallet/sd12t-wallet 23/03/2015-22:09:44

  23/03/2015-22:09:55 unhandled exception in AXFCustom.launch_command_soap SQLCODE =-29273: ORA-29273: HTTP request failed

  ORA-06512: at "SYS." UTL_HTTP", line 1130

  ORA-29106: could not import the PKCS #12 wallet.

  ORA-06512: at the 'APPS '. AXF_SOAPCALL', line 14

  23/03/2015-22:09:55 AXFCustom.main: output

  < / SNIP >

  Please provide your input on this.

  Thank you

  Shakeel

  Hi Shakeel,

  This error occurs when there is some value (which is unnecessary) present in the column "AXF_WalletKey."

  To resolve the above error, please follow the steps below.

  1. connect to AXF schema using SQL developer.

  2. run the command AXF diagram below.

  Call fnd_vault.put ('AXF ', 'AXFWalletKey',' ');

  commit;

  3. disconnect the session of EBS log on again and check the Zoom button.

  Kind regards

  Rahul

• J460 wireless, win 7, WORD &amp; Excel, print lost files.

  When I got this PC (computer desktop HP Compaq Presario CQ5024IT (Win 7 version 6.1.7600 Build 7600)) and printer J4680 last December (2009), I installed the printer as wireless & everything worked for a while. Had to get the cd of HP that it came with Win 7 stuff. (Also, don't is close to phone line yet so no fax functions have been attempted).  After several months, the printer started to cannot print in certain circumstances. (History, so I don't remember all the details.) As I remember, functions came and went. For the past months, it has not printed from WORD or Excel...

  After several installs (one final & most successful is also wireless) since the CD from HP, the rpt of tst do not Work wireless says 'no probs found congratulations successful wireless printer installation. Diagnosis pg & test sent pg of the PC as well print correctly. Printed pages of Word or Excel appear in the display printer as printing for a few seconds and then go away from the display, but the printer does not... I installed the j4680 as USB or wireless connected and the same symptoms occur (currently is wireless).  Win 7 insists on the fact that I have the latest & best driver when released to research... on some previous installed try to print the test or diag pgs gives 'the computer cannot communicate with the printer' or words to that effect, it does not right now so I don't have the exact wording of msg. I have the network printed report with lots of data (the excellent signal strength) available if necessary test configuration.

  ......... HELP PLEASE HELP ME RHONDA... Ben in Kona

  The download file is as follows:

  2009-10-22, version: 13.0.0, 315,95 M

• Failed to get the status of printer/bizhub Konica Minolta C654e

  Failed to get the status of printer/bizhub Konica Minolta C654e

  Cannot print from my Mac.

  With the limited information you supplied I would check the configuration of the print queue. If you open information system (located under Applications > utilities), you will see a column on the left and if you select printers the right pane displays the print queue information. Note If you have multiple printers, you can select in the right upper pane to view its information in the bottom right pane. Can you copy this information and paste it here.

• The installation of my recently acquired HP J3680 failed due to lack or the 'print spool.

  Original title: EU tive an instalacao da HP j3680 interrompida por falta "of printing spool" Como procedo?

  The installation of my recently acquired HP J3680 failed due to lack or the 'print spool.

  What can I do?  You have a possible solution?

  Thank you

  Fernando

  Hello

   
   
  What is the exact error message that you receive?
   
   
  I suggest you read the steps from the article below and check if it helps.
   
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
   
  If you want to support in your language, then I suggest you check out the link below.
   
  
  http://support.Microsoft.com/common/international.aspx