The installation of my recently acquired HP J3680 failed due to lack or the 'print spool.

Similar Questions

• Acrobat downloads and passes by the installation process but the stalls at the end sentence "the print spooler could not start" someone told all solutions?

  Acrobat downloads and seems to go through the installation process but the stalls at the end by saying that "the print spooler could not start".

  All this experience and give me advice?

  Hi johnt46100749,

  Please try the solution mentioned in this KB doc https://helpx.adobe.com/creative-suite/kb/error-1920-service-print-spooler.html .

  Kind regards

  Nicos

• Could not start the print spooler service, to get the error message: 1053-service cannot be answered on the local computer.

  Original title: Print printer printing

  I can't get the print spooler to turn on, get error 1053-service cannot be answered on the local computer. I tried password admin and services, but it will not turn on. Any suggestions?

  Hi, DUBOIS,.

  This error occurs when you do not have the latest service pack for Microsoft .NET Framework 1.1.

  Please answer the following questions.

  1. What operating system do you use?
  2. What is the brand and model of your printer?
  3. Did you of recent changes made to your computer?

  While your answer above information, refer to the suggestions for the following link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  Hope the above information helps.

• How to restore the print spooler in the printers/faxes folder in Control Panel

  Recently discovered, I can't print because all the information of the printer in my printers and Faxes folder in Control Panel had disappeared.  When I clicked on "Add a printer" it is said "operation could not be performed.  The print spooler service is not running.

  When I tried different ways to study or to restore service, it does not appear that the print spooler service is here, so that no printer can be installed.

  I would like to know how to fix this problem and get the returned printers in service again.

  Help, please!

  Yes, I tried your suggestions.  It was useful, but it didn't completely solve my problem.  The spooler was still missing.

  I think that there is something different going on inside the machine, because other funny things started to happen, alarmed me thinking that there is some hidden virus eating away at the system code!

  I ran MS security scan several times and also McAfee Security Suite.  Security under the full Scan scan found a virus, but it doesn't seem to be the problem after I got Safetly purged, Scan it.  McAfee came up with nothing.

  So, the way I finally solved it my problem was to do a full restore from backup, and if the operating system was restored.  In this way, I know that the functions of the printer will be restored, who he was.

  Sorry did not had time to review all the details that you suggest, but I was running out of time to try too much, so the "faster" was a system restore as the surest way to get rid of all the problems and restore to the original code.

  Thank you, you have been very helpful.

• How can I get the print spooler to start when the file is missing: lexbces.exe? where can I download this file?

  I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?

  Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install.  When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces.  Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the = but there is a space after it.

  Restart the computer.

  See the instructions on One Article to do a clean installation of your printer.

  After the restart, you can check that the print spooler has started in several ways.  One way is:

  Open a command prompt window and type the following command, and then press ENTER:

  spooler request SC

  You should see the following in the command prompt window:

  spooler request SC

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

• The Print Spool Service does not work

  I use Windows XP and have 2 printers installed.  I had no problems until recently, when I try to print I get an error message that I need to install a printer.  When I went to control panel to check the status of my printers don't have no installed printer.  When I clicked on the "Add a printer" icon, I received a message that the "Service of Spool of printing does not work.".  I can't find anywhere in the menu helps an answer to this problem.  Any help would be greatly appreciated.  I must mention that I restore the computer to an earlier time and he has not made a difference.

  To activate the Print Spool Service, follow these steps:

  1. click on the Start Menu, click Run, type "services.msc" and press ENTER.

  2. in the Services pane, click on "Alert" and scroll down until you see "print spooler".

  3. click on "Start service" or "Restart Service", as the case may be.

  The print spooler service should now be enabled.

  Check if the printing problem is resolved.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Not in the print spooler service

  Trying to install wireless printer, but cannot load disk from HP software because "Spooler not to the print service. Had problems of virus recently and suspect damaged printer driver. Where am I going to restore the print spooler service?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the print spooler service in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. After the change is made click apply and then click OK. Restart the computer and verify if it has started. Hope this helps, Gerry Cornell

• The folder administrative tools devoid of orders for the print spooler problem that is stopped.

  I could not install my printer because the spooler is stopped.  According to Windows help, the problem can be solved by administrative tools.  But the biggest problem is: the Administrative Tools folder contains anything other than "Windows SuperShell Modules.  The Service order through which is accessible the print spooler service is NOT there.  Is there another way I can make the spooler running?

  Hi francisco a.sanchez,.

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• How to remove a printer who falls down the print spooler

  Windows 7 64 bit

  My print spooler seems to be screwed in place. Initial symptom was showing no printer installed, even though I have several applications. I was able to remove all my printers except one: when I try to delete it, the print spooler crashes, thus preventing the printer are removed. The printer (and others that I was able to successfully delete) has been installed with Novell iPrint.

  I've seen a few references to stop the print spooler and removing all C:\Windows\system32\spool\PRINTERS, but this place is already empty for me (with no hidden files).

  Official documentation of Windows 7 to remove a printer says:

  1. Open devices and printers, click Start , and then, on the start menu, click devices and printers.

  2. Right-click the printer you want to remove, click on remove the device and then click Yes.

     If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I don't have an option "Run as administrator" on the printer, so I can't try that last bit.

  Any other suggestions?

  I guess you tried to uninstall the software of the printer through programs and features (if there is one)?

  Is there an associated service of Novell iPrint? If so, stop it, then try the previous steps.

  Is it possible to raise again through iPrint installation and remove it? I'm not familiar with this program (it's been 20 years I messed with Novell).

  You are an administrator on this PC? Is this printer a network printer? If so, are there other PC on which may be trying to access?

  --

  SC Tom

  P.S. I don't have the option "Run as Administrator" when I right click on any printer on one of three different computers with three different operating systems, so I don't know where Microsoft came up with that one.

• Update of Acrobat Pro XI crashed the program and the print spooler

  I have a brand new 10 windows computer and had installed Acrobat Pro XI which worked great until the latest update has been released. My computer tried to auto install the update and the update failed. Immediately when it failed, it crashed my spooler to print and all my printers disappeared; I was unable to reconnect to them without having to restart the computer.

  The Acrobat site suggested that if the update was unsuccessful and failed, I should uninstall Acrobat Pro and reinstall it. Well, I tried that and the problem cascaded gets worse. Acrobat does not provide ANY technical assistance with this kind of thing except through public forums.

  When I tried to uninstall Acrobat Pro, as the site of Acrobat has suggested, I ran into the problem with the print spooler again; He could not reset and start. For example, Acrobat Pro can / can not be uninstalled. I tried to 'fix' the installation without success. And when I tried to reinstall the program, it could not properly reinstall because I had to install the 'Adobe Application Manager' that does not install with the following message: "Installer failed to initialize. " Please download Adobe Support Advisor to detect the problem"and has provided a link. Of course, when you click on the link, you get another message, "that The Adobe Support Advisor has been abandoned" direct me to the forums that provide absolutely NO support for that either.

  At this point, I lost my * expensive * Adobe Acrobat Pro XI product, with no way to reinstall and no help to fix this Adobe created. In addition, I now have another serious problem with the print spooler.

  If * person * helpful suggestions, please send them my way. I'm ready to throw Acrobat altogether and never use one of their products that has been such a mess to deal with.

  Hi rickj90358804,

  If you try to install Acrobat XI via Adobe Application Manager, I suggest to download an installer manually using this link: download Pro or Standard versions of Acrobat DC, XI or X and try to install again.

  In addition, you can contact the support as kglad mentioned above.

  Kind regards

  Tariq Dar.

• How to restart the print spooler in Wnidows 8

  The print spooler is a service that is built into most Windows operating systems. His job is to help control print jobs and interact with the printer. Problems with the print spooler are blocked in the queue of print jobs.

  Sometimes the print spooler stops working or was an error to occur. The following video shows how to restart the print spooler service in Windows 8.

  For similar problems with printing try printing HP and the Scan doctor. It is a diagnostic utility that can sometimes find and solve printing problems. Find and fix common problems printer using HP Diagnostic tools

  I hope this helps someone who has problems with their print spooler or who needs to restart. If someone has a problem to restart the print spooler let me know and include your computer model number and that you use 32-bit or 64-bit of Windows 8.

• How to fix: Error 1053 of the print spooler

  Are you an error when you try to restart the print spooler?  Do you have your printer spooler error and now, do not restart?

  You saw "error 1053: the service did not demand launch or control in a timely.?

  There is a page of Microsoft support with information about this error, which can be found here.

  According to Microsoft:

  • Question: The ServiceBase class calls the OnStop method directly from the Service command handler that is defined in the ScDispatcherLoop of the Advapi32.dll file. After 30 seconds, if the ScDispatcherLoop thread is not ready to receive a new order of service from service control manager, Windows brand services controller out service as 'time '. Therefore, you receive this error message.
  • Resolution: to resolve this problem, obtain the latest service pack for Microsoft .NET Framework.

  This resolution works for some, and allows the service to return to the correct functionality.  However, I want to provide workaround incase this option does not work for some.

  • Open the run command by selecting it from the start menu or by pressing the Windows key (to the left of the alt) + R
  • Type services.msc and press enter
  • Scroll down and double click on print spooler
  • Select the tab log
  • Uncheck the Allow service to interact with desktop
  • Click apply
  • Select the general tab for the print spooler, and then select start

  I have the confirmation that this workaround works for some users.  The link below will take you to a thread where this information has resolved this error a user in these forums:

  1053 error print spooler does not start thread

  Here is the video where the workaround steps, listed above, were found.  The video also gives a graphical representation of these steps for those who prefer the Visual instructions.

  I hope this helps users with error 1053 of print spooler.

• System OR Configuration: (Hex 0x8004041F) the operation failed due to lack of dependence.

  I went to start one of my vi of today and I get this message: NI System Configuration: (Hex 0x8004041F) the operation failed due to lack of dependence.

  No one knows what it is or how to fix it?

  I finally fixed it.  After a complete repair of all my software from National Instruments does not solve it.  I've updated my fpga, labview real-time for 2013 SP1.  Everything seems to work again.

• Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

  I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

  The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

  Print spooler starts windows 7 error 1053