Request for PIN serverside code?

Similar Questions

• I installed the free age of empires online play and its request for a key code? Why is it if it's free?

  Download the age of play free online empires site microsoft Web and its demand for a key code? How is it so if it's free?

  Hi Joe_2011,

  I suggest that ask you this question on the forum of the Age of Empires. Here's the direct link:

  http://Forum.AgeCommunity.com/

  hope this helps

  B Eddie

• Request for Pin wireless connecting to a linksys router

  I want to heck the feature in windows vista that asking to enter a PIN instead of simply asking for my shared key of wireless wpa. Can someone tell me please how to disable this feature in windows vista.

  The possibility of using a PIN instead of a password for wireless is on the router, not the computer . Go to the Linksys configuration utility and disable the PIN requirement wireless has from there. This is general information about implementing a secure wireless network, which includes how to enter the configuration of the Linksys utility.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Excellent guide for setting up of a wireless network, with images -http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• How can I make Apple sent an official request for Andorra in the list of international codes?

  Apple acknowledges that Andorra Telecom (Mobiland) is an approved operator.

  However it does not include the international dialing code of Andorra (+ 376) in the list of phone prefixes in the country.

  This prevents verification services, such as in two steps and two-factor authentication.

  How can I make Apple sent an official request for Andorra in the list of international codes?

  Thank you.

  Return of goods - Apple

• Failed to perform recovery of factory setting - error 0x8007045D Code / product key error - "ERROR!" We encountered a problem with the request for approval.

  Original title: product key error

  Hi all...

  I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
  I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
  Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:

  "ERROR!" We encountered a problem with the request for approval.

  What should I do now? Y does it can someone help me?
  Thank you.

  Consider the following text:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  also check:

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• request for upgrade windows 7 to windows 8 do not accept Canadian postal code

  request for upgrade windows 7 to windows 8 do not accept Canadian postal code

  Hello

  This problem would be better suited to be managed by the sales and support. Check out the link.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

• Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed.

  Separated from this thread.

  Hello

  I'm faced with the same question. I went to settings of your laptop and ran the recovery, but it did not help. I went to Device Manager and I noticed an error: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed. Tried to fix that with an alternative of Microsoft Community (http://support.microsoft.com/mats/hardware_device_problems/?wa=wsignin1.0), but the issue could not be resolved. I don't know if they are related, but I think so. Spent so much time trying to solve this problem and would be really grateful for the help. Have had the computer for less than 3 weeks...

  Ewa

  Hi Ewa,

  Thanks for the reply.

  I suggest you to update the drivers for the chipset of your computer and check if it helps. You can use the link below. Select the appropriate component and the operating system from the list. The link given below is for Lenovo 11 2 yoga, if you have any other device then please provide us with the exact model number or select the correct model number.

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-2-11-notebook-Lenovo?c=1

  As you mentioned that the other two USB ports work correctly, according to me is not a problem with the driver. It seems to be a hardware problem.

  Let us know the status.

• I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to do the ph

  I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to make the phone number in the clickable query. I know the code to do it well not in a query. What is the code?

  As far as I saw, most of the smartphones will automatically recognize it these days, as long as the number is written in a format of regular phone number. This format also allows to make images or text other than a telephone number in a tap to call the link.

  Looking at what you have presented I guess it would be something along the lines of...

  urmcell>>">urmcell >

  When the location of the link and the link text would be the same variable.

  I've never worked with Intelliclick so above is a wild guess. They would be those who need to ask themselves if there is a way to fill in the address of a link like that.

• Bishop Smartphones BB 8520 blackBerry desktop software requests for unblocking code connection

  I want my wife to backup is unlocked 8520 (tmobile running). Her friend tried to install an app some time ago (I don't know the details) and the result was it's the blackberry all deleted data instead. Thought I would setup the software of BB (for Win7) Office Manager but when connected it calls for the "unlock code". Wifey is scared s - less than at the time when I enter the unlock code, the bb will destroy itself again. And, of course, I don't want to be between it and the phone if that were to happen ;-). Can someone tell if it is safe to proceed? Or, if not (or if questionable), is there another way to backup/restore of the data on the phone? She has no data plan, btw. $30 / mo tmobile talk/text only is sufficient for its application.
  Thanks much for any help!

  Hello and welcome to the community!

  Looks like she had a locking device assigned to his BB password. When it is in place, it is required when connecting to the PC to do something with this BB at all. So, since the PC keyboard, you must enter the correct password that customarily used to unlock his BB on his keyboard. If, given the difference in keyboards... a lot of people think that, on their BB, they hit some specific characters for their passwords when their password is something completely different... in fact, it's the characters of the password that are needed, not only the physical of the BB pressed keyboard keys (ALT and control keys using change as a result of the BB keyboard character).

  If you enter it's bad, it should say, as well as tell you how much you have left the attempts (usually there are 10 attempts). If this happens, then you can always untether and enter the password on the BB keyboard (they are the same counter), closely observe can see what are the actual password characters.

  Good luck!

• Can I make a request for a serial number for a purchase of creative suite 6 that children would not use so far? I have the product code on the box that it came.

  Can I make a request for a serial number for a purchase of creative suite 6 that children would not use so far?  We were home educate at the time we bought 3 years ago and had problems with details on proving that they've been to school so it has been in the too hard basket at the time.  Would really appreciate someones help I have spent hours trying to find the answer online and can't.  At soon Suzanne.

  Locked, go to get a serial number for creative suite at this late date 6.

  Serial number is normally inside the box, in the case of disk, not outside where everyone could find and use it.  Find the serial number of your product Adobe quickly

  If you continue to have a problem, then you will need to contact the Support from Adobe directly when they are available (on weekdays).

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• vCAC: generate a request for approval of vCO?

  When generating complex workflow IaaS in vCO that sometimes you want to trigger a request for approval in the middle of a flow of work, and not only during the generation of the request.

  This would probably require reminders of vCO in vCAC.

  The integrated workflow of the plugin vCAC has no code to do this. But I don't know it can be done using the REST API.

  Someone at - it examples they want to share?

  Hello

  Could you give a scenario from end to end of what you want to achieve? I think that what you want can be as simple as creating a user interaction in your workflow (or a branch of your if necessary), then this user input will be automatically converted into a work item (approvals are a specific type of work item) in vCAC. All you need is to use the built-in default vCO or configure your external vCO with advanced Service Designer.

  I hope it helps.

  Sergio

• Create the request for approval to remove the user operation with IOM api-11 g Release2

  Hello
  
  How do I create an approval request for an API using operation user remove? Can someone guide me? Any help is greatly appreciated...
  
  
  ARO
  Aliye

  You must use the new API set to create the request. OIM 11 g R2 supports model not application so your code will be changed.

  Examples: http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABGBEHG

• Problem with request for compensation

  I'm having a problem with the request for compensation. I try to enter a request for compensation and there is no button Save located in the corner.
  
  When I try to save, by clicking on the control center, the pop up screen comes to save, but when I click Yes, nothing happens, and the quick screen is still there.
  
  I use ie 8, the question is the same in firefox.
  
  Any ideas?
  
  The page comes up with a question:
  
  Webpage error details
  
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB7.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.3;. NET4.0C)
  Timestamp: Tuesday, November 20, 2012 15:10:15 UTC
  
  
  Message: 'window.document.forms.anchorForm.elements' is null or not an object
  Online: 542
  Char: 3
  Code: 0
  URI: http://db-md-04:7001/exponline/requisitiondetail.do?action=create & cntrmasterkey = f8d9ce7812ae4572a533cbd568 & to tovendor = PGCPS & to tovendorini = BA & to fromvendor = SPECIAL & to fromvendorini = has & to periodto = 2012 percent 2F11% 2F20

  In Internet Explorer, tools, Internet Options, tab advanced
  Uncheck enable third-party browser extensions.

  In windows control panel, Java, Advanced tab, Java plug-in
  Uncheck * Activate the java plug-in of new generation

  Restart the browser

• How to prevent "a request for the item is now underway."

  Hello guys,.

  Im getting this error very often, is there a solution to this?

  Error: Requested Item is not available. A request for the item is now underway.
  at mx.data::ConcreteDataService/resolveReference() [C:\depot\DataServices\trunk\frameworks\pr ojects\data\src\mx\data\ConcreteDataService.as:2203]
  at mx.data.utils::Managed$/getProperty() [C:\depot\DataServices\trunk\frameworks\projects\dat a\src\mx\data\utils\Managed.as:183]
  to sgrh::_Super_Empresa/actividade() [C:\wlcds\sgrh\src\sgrh\_Super_Empresa.as:198] get
  at mx.data.utils::Managed$/internalCompare() [C:\depot\DataServices\trunk\frameworks\projects \data\src\mx\data\utils\Managed.as:648]
  at mx.data.utils::Managed$/arrayCompare() [C:\depot\DataServices\trunk\frameworks\projects\da ta\src\mx\data\utils\Managed.as:696]
  at mx.data.utils::Managed$/internalCompare() [C:\depot\DataServices\trunk\frameworks\projects \data\src\mx\data\utils\Managed.as:608]
  at mx.data.utils::Managed$/ http://www.adobe.com/2006/Flex/MX/Internal: Compare () [C:\depot\DataServices\trunk\framewor ks\projects\data\src\mx\data\utils\Managed.as:522]
  to mx.data::ConcreteDataService / http://www.Adobe.com/2006/Flex/MX/internal:getDataListWithFillParams ([C:\depot\DataServi ces\trunk\frameworks\projects\data\src\mx\data\ConcreteDataService.as:3751])
  at mx.data::ConcreteDataService/internalFill() [C:\depot\DataServices\trunk\frameworks\projec ts\data\src\mx\data\ConcreteDataService.as:7178]
  function / < anonymous > () [C:\depot\DataServices\trunk\frameworks\projects\data\src\mx\data\C oncreteDataService.as:1317]
  at mx.data::ConcreteDataService/fill() [C:\depot\DataServices\trunk\frameworks\projects\data\ src\mx\data\ConcreteDataService.as:1336]
  at mx.data::DataManager/fill() [C:\depot\DataServices\trunk\frameworks\projects\data\src\mx\d ata\DataManager.as:1560]
  to _Super_FuncionarioService / getByEmpresa () [C:\wlcds\sgrh\src\sgrh\_Super_FuncionarioService .as:341]
  at mz.mysoft.sgrh.telas::ListaFuncionarios/reset_clickHandler() [C:\wlcds\sgrh\src\mz\mysoft\ sgrh\telas\ListaFuncionarios.mxml:58]
  at mz.mysoft.sgrh.telas::ListaFuncionarios/__reset_click() [C:\wlcds\sgrh\src\mz\mysoft\sgrh\ telas\ListaFuncionarios.mxml:84]

  Kind regards

  Marie Pierre

  Errors of ItemPending means that the customer of data services will look for an item that has been marked as lazy or load on request.  This should be an event waited and managed by the code of any ACE that touches a collection of table who has lazy elements in it.  Eg the AsyncListView in Flex component automatically manages these errors, as the DataGrig Halo (mx:DataGrid).

  See the documentation on the mistakes of ItemPending here: http://help.adobe.com/en_US/LiveCycleDataServicesES/3.1/Developing/WSc3ff6d0ea77859461172e 0811f00f6f6de - 7ffcUpdate.html #WSc3ff6d0ea77859461172e0811f00f7045b-7f4aUpdate

  Tom

• AJAX request for example help

  Hi all
  I have a question regarding the excellent example Denes Kubicek has Section III - Ajax request for example - http://apex.oracle.com/pls/otn/f?p=31517:135:1771969688591802:NO. This example contains text, elements of field based on the data entered when the user clicks on the search button. I've implemented this example successfully, but one of my items in my test application is a Select list (real application will select a few items in the list). Can someone help me in completing my item in the list to select the exact data when search is selected? No data is returned. When my search for end users, I still want they to be able to apply the changes which is why I want the select list active for some items, thanks before all time.

  Hi Charles,

  {The question was that there were a few}'s to spare in the code. I commented on these stars and all seems ok now - the selection list is being updated as you selection/next/previous

  I have not, yet, have a unique demo application - I actually have 98 different ones in my workspace containing 1 156 pages. I keep meaning to all this merge in one great app and let everyone connect users. But I don't have time now to do for this number of pages! Most pages, are good in my applications 267 and 33642, so if you do a search for these numbers and my username (503936), then you will see most of the things I've done.

  Andy