Request for use of the virtual computer RAM

Similar Questions

• Sending requests to network IN on the virtual computer invited

  I just started a trial of VMWare Workstation and while my guest computer has obtained an IP address from my DHCP server and obtained all necessary to access the universe via the LAN (I can Google etc), I can not connect this computer invited. If I ping its IP address, it ignores the ping. If I ping the host machine, it responds to the ping command.

  It is very imprtant to work I want to do that I could issue request for applications inside the guest VM for example the servers Web, SQL Server etc..

  I would be grateful for any help anone can provide.

  Thank you

  Dave

  Welcome to the community,

  Since you say "has obtained an IP address from my DHCP server" I guess you setup a network bridged for the virtual machine. In this case, I would start to take a look at the firewall on the client to see if the ICMP traffic is blocked (the default for new Windows systems).

  André

• Reload the Configuration of the virtual computer after changing the VMX file

  Hello

  If I make changes to a file on a virtual machine's .vmx in vCenter 5.5 is automatically valid configuration for the engine power vm off? I made some changes earlier and it seemed to be the case, but one of the steps that I see in some of the documents is to reload the configuration of the vm, so it can be used appropriately. So this happens automatically or not?

  Hello

  If she turned off the virtual computer, then during power on, changes to take effect.

  Concerning

  Mohammed

• Move-vm can migrate a powered off the virtual computer to a DRS cluster?

  When I try to move-vm has propelled off VM to a destination of DRS cluster, he says that he cannot migrate a powered off the virtual computer to a DRS cluster.   I can explicitly name the destination of the host and it works, but that defeats the purpose of using the DRS and forces me to script on the destination hosts.

  I do something wrong or I would be able to migrate a powered off the virtual computer to a DRS cluster?

  Thank you

  -MattG

  Hello, MattG-

  I get the same behavior as you when you try to move a VM PoweredOff to a DRS cluster, specifying the cluster as the value for the parameter - Destination to Move-VM (using PowerCLI v5.1 Rel 2 v5.5 Rel 1).  Not quite what I expected.

  To work around the problem, and without having to appoint a particular host as destination, you could use some Get-Random, do something like:

  Move-VM myVM0 -Destination (Get-Cluster myDestDRSCluster | Get-VMHost | ?{$_.State -eq "Connected"} | Get-Random) -RunAsync
  

  Who should receive the machine said cluster and on a host that is in the connected state.  A subsequent operation to the market (whenever do you eventually) should then see DRS power on the virtual machine on a suitable host in the cluster.

  Maybe the dev team can comment if this behavior is the expected or desired.

  Anyway, how does do for you?

• How can I type of NETWORK adapter in the virtual computer a vCloud?

  I'm trying to write a script that compares the type of NETWORK card in vCloud NIC type in vCenter to work around a bug in vCloud 1.5.  I can get the type of NETWORK adapter in the virtual computer a vCenter by getting the vCenter VM up and running:

  
  

  $vcvm | Get-NetworkAdapter | FT-auto
  Name Type NetworkName MacAddress WakeOnLanEnabled
  ----              ----           ----------- ----------        ----------------
  Network adapter 1 isolated EnhancedVmxnet 00:50:56:01:00:33 True

  
  

  I do not get the same results when you perform an action similar to vCloud:
  $vcdvm | Get-CINetworkAdapter
  
  
  Connected primary index IPAddressAllocation IPAddress ExternalIPAddress VM
  ----- ------- ---------  ------------------- ---------       ----------------- --
  0 true true manual 192.168.10.30 nic1
  
  
  I can get all the other info NIC, such as the network, IP, MAC, etc, but not the type:
  ($vcdvm. ExtensionData.section) [2] .networkconnection
  
  
  Network: isolated
  NeedsCustomization: false
  NetworkConnectionIndex: 0
  IP address: 192.168.10.30
  ExternalIpAddress:
  IsConnected: true
  MACAddress: 00:50:56:01:00:33
  IpAddressAllocationMode: MANUAL
  Get_anyattr:
  VCloudExtension:

  For the moment, I get the type of NIC the vCloud himself database vCloud.  Thanks for any help.

  I use VMware vSphere PowerCLI 5.1 Release 1 build 793510

  I could tell you where to find it, but there is a bug in the API that shows only as PCNET32 anyway (sleep if she could be VMXNET3). Keep doing what you're doing with the database query.

  See you soon,.

  Jake

• Request for use of resources

  I have created a virtual machine (32-bit xp) on top a stand-alone esxi host.

  Config of XP vm

  1 vcpu

  516 MB of ram

  There are 212 MB

  512 MB limit

  airline booking is 50 MB

  It's that the virtual machine uses more memory host according to the attachment screenshot

  mem comments + mem (180 + 50) fresh General = 230 MB which does not correspond to the memory of the MB 479 host, where the remaining host mem is used (479-230 = 249 MB)?

  Rickard Nobel wrote:

  Aurélien wrote:

  1 comments memory is the memory of a virtual machine usage.

  The memory of comments to this point of view is the 'active', which really isn't the use of the memory of the virtual machine, but an estimate on what amount of consumed memory that have been recently accessed inside the VM. The virtual machine can be loaded in much broader areas of memory to 180 MB in this case, but only about 180 MB have been read or written during a sampling interval.

  What does ""but an estimate on what amount of consumed memory that have been recently accessible inside the virtual machine. " " what say, different from the use of the memory to a virtual machine. -Yes of course memory is constantly used in any server so there will be a change in common value in time. even when we notice in the Task Manager.

  Memory use which have been recently accesed inside the VM, refers to the memory used by the virtual machine.

  For more precision: -.

  Memory consumption is nothing other than the physical memory allocated to the virtual machine and the memory of comments is nothing other than memory force used by the VM of consumed memory (physical memory) in the present case, the memory consumed is (active) 479 MB memory and comments is 180 MB. Yes, the values are up and down, because the memory usage is not constant in the server... so the value will receive periodically modified or updated frequently.

  Please see the screen below the my virtual machine is very good even on the inside and the outside of the machine virtual... here the physical memory is 700 and active memory is 1003.

• Strange problem after moving from the virtual computer to a new data store

  I am migrating our VM existing (8 in total) a 'problem' RAID to a new table on a new controller and am having a strange problem. Here are the steps I took (host OS is Ubuntu 8.0.4 LTS x 64):

  (1) off the power the virtual computer from the Web interface

  (2) the directories created for each virtual on the new RAID array computer (in this case a RAID 10 array on LSI 9750-8i controller)

  (3) rSync used to copy the data from RAID1 to be RAID2

  4) has created a new data store on the new RAID through the Web Server of VMWare user interface.

  (5) removed VM of the inventory through the Web, their return, added user interface then choose files .vmx on new data store on RAID2

  They have all power save fine... but three of them are not accessible on the network. I can open a console in the Web Server of VMWare user interface and they all run normally... but I can't their ping or access the respective virtual machine Web GUI. It seems quite arbitrary that those who work and those who are not. In this case... the VM that don't work is a license Autodesk, a Squid proxy server and a VM of cactus. All three of these virtual machines are 32-bit Ubuntu Server VM (two 8.0.4 and a 10.0.4)... and are the only Ubuntu VM on this host. It must be signifigant but I'm not see how.

  If I delete these three virtual machines of the inventory again and add to their original location (on the RAID1) they light up AND work normally. A consultant that we were working seemed surprised, as he had also done this experiment with some of the older VMWare products. I don't see how it would be the physical location of the files of the virtual machine. Any ideas?

  We rely on the migration to ESXi soon but in the meantime, we get these a few VM out of this RAID array problem. I'm stuck.

  Depending on the application, it may be enough to reconfigure the IP parameters (they are very probably on DHCP now) for the newly detected virtual NIC.

  André

• Script to rename the virtual computer by name DNS listed in VC

  I am very new to powershell, and I tried to understand this by using pieces of code I found, but nothing helped.

  I'm looking for a script to take the given DNS host name for a virtual machine listed in VCenter and rename the virtual computer.

  For example.

  Host01VM01 (as shown in Vcenter) - the DNS name of the "something.xyz.com".   VM and rename it "something.xyz.com" in Vcenter.

  To run the script only for a group called "Mycluster" you can do:

  Get-Cluster "My Cluster" | Get-VM | `
  Where-Object { $_.Guest.HostName } | `
  ForEach-Object { Set-VM -VM $_ -Name $_.Guest.HostName -Confirm:$false }
  

  This script will only work for VMS that have installed VMware tools and probably only for VM which are turned on.

• Get the IP address of the virtual computer? (when no DNS available)

  I have a strange setup where I have a server vCenter runs in a private network that has no DNS available IN-HOUSE.  I am running the scripts that query an IP address range, but takes forever to run.  I can run get - vm and get all virtual machines, but can't do anything with them because there is no DNS and I can't find a way to enter the IP address of the virtual computer.  If I could get the IP addresses I could then run functions against them.  If it makes a difference those VMS have two network cards: Public and private.  Any ideas?

  The Get - VM cmdlet returns the IP addresses to the title of Guest.IPAddress count of the first IP address use as well:

  Get-VM |Where {$_.PowerState -eq "PoweredOn" } |foreach { Write "$($_.Name) has an IPAddress of $($_.Guest.IPAddress[0])" }
  

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://Virtu-al.NET

• Is it possible I can get the virtual computer connectivity after restart to connect to the local network in the host operating system?

  Hi all

  For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,

  1. reboot the virtual computer

  2. restart VMware Workstation

  3. restart the corresponding system services in the host operating system

  The only way I can retrieve all is to restart the host operating system itself.

  Yes, is there short any path, I can retrieve the connectivity of these virtual machines?

  Thanks in advance.

  Yark

  yarkwang wrote:

  I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.

  Try installing a newer driver.  According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):

  - http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

  1 came out of safe guard 360

  Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed').  You may need to uninstall to make sure that it is not interfere.  (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).

• If I use different, the same computer, but an iCloud account will be my projects get lost?

  If I use different, the same computer, but an iCloud account will be my projects get lost? I downloaded the trial version to my friend with her iCloud computer and now it is expired and my project was not yet ready. If I connect with my iCloud on my friend's computer and buy FCPX, my project will be there? And if not, if I buy the program with my friend iCloud account, is it possible I could move my computer later? I would not buy an app €300 just for my friend...

  LLA libraries are separate from the application. That you have subscribed to the trial is quite distinct from what you use to connect to the purchase. However, once you bought with an Apple ID it is that you always have to sign in with to receive updates. The application and the Barrie similar don't really care what you signed in in iCloud.

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• Alarms / opinion on the use of the virtual machine JAVA Perm Gen

  Hi team,

  I need to configure alarms / Notification each time that the use of the virtual machine JAVA Perm Gen is greater than a threshold value. I don't see all the default rules / corresponding to Perm Gen registry variables.

  Could you please enlighten us in how I can achieve... ?

  A screenshot is attached for your reference.

  Kind regards

  Arun

  I tested it after the previous message which was released indicating that you have an error, the nice thing about Foglight is that it allows to see the measures that exist (as you noted the names are a bit different in this case as the example of the JVM) and it also gives you a test button to validate the expression) , don't forget to make sure that she only appliese to the things that have names like Perm if you want it calculated only for generations of perm.

  

  

  Can you please define this thread as answered.

  Thank you

  Golan

• Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  On Fri, 28 September 2012 18:02:40 + 0000, bertcoy wrote:

  Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  Looking at the website of Olympus, it would appear that we do not
  There are.

  But you do not need a driver because you do not need to connect your
  camera to the computer. Just put the memory card in a card reader and
  access like this instead. I prefer to do it with my camera,
  because it is easier, faster and uses no battery in the camera.

  Ken Blake, Microsoft MVP

• need to reconfigure the virtual computer after deployment of the vm

  Hi all

  I have a script to deploy a computer virtual to a CSV file. I need to change the configuration of virtual machine (CPU and memory) after the deployment of the vm. where the name of the virtual machine should be taken to csv. So any help is appreciated.

  Attach the script used. (downloaded and works fine)

  $vms = import-CSV D:\vm-deploy\vm-deploy.csv

  {foreach ($vm to $vms)

  $Template = get-model $vm.template

  $VMHost = get-VMHost $vm.host

  $Datastore = get-data store $vm.datastore

  $OSCustomization = get-OSCustomizationSpec $vm.customization

  New-VM-name $vm.name - OSCustomizationSpec $OSCustomization - VMHost - $VMHost model $Template - $Datastore - Datastore RunAsync

  }

  # This cmd need to run after the vm deployment completed. The virtual computer name must come from the 1 column of the CSV file

  Set-VM $vmname - NumCpu 2 - MemoryGB 5 - confirm: $false

  Write-Host "All VMs deployed" - ForegroundColor Green

  Disconnect-VIServer-confirm: $false

  CSV file looks like this

  Name, host datastore, Template, customizing

  Test-VM,vm-dep-test,ESX02,P5-vm-stage,vm-deploy

  Thanks in advance...

  A simpler, but not optimal, solution is to use the Wait-job cmdlet.

  Something like that

  $vms = import-CSV D:\vm-deploy\vm-deploy.csv

  $tasks = @)

  {foreach ($vm to $vms)

  $Template = get-model $vm.template

  $VMHost = get-VMHost $vm.host

  $Datastore = get-data store $vm.datastore

  $OSCustomization = get-OSCustomizationSpec $vm.customization

  $tasks += new-VM-name $vm.name - OSCustomizationSpec $OSCustomization - model $Template - VMHost $VMHost '

  Data - $Datastore - RunAsync store

  }

  Waiting-task-task $tasks

  {foreach ($vm to $vms)

  $vm.name set-VM - NumCpu 2 - MemoryGB 5 - confirm: $false

  }