request upgrade from esx3.5 u4 to vsphere

Similar Questions

• How upgrade from VMware Infrastructure 3 VMware vSphere 4

  Hi all

  Is there any document/video for upgrade from VMware Infrastructure 3 VMware vSphere 4? If so, please reply back.

  Hello

  You should take a look on the following document.

  http://www.VMware.com/PDF/vSphere4/r40_u1/vsp_40_u1_upgrade_guide.PDF

  MCP, VCP

• Upgrade from ESX3.5 to vSphere 5.0

  Hi all

  I have a project to upgrade on update my old host ESX 3.5 and VirtualCenter 2.5 to the most recent and vSphere vCenter Server 5.0 and 5.0.

  After having read in the doc upgrade and because of the environment is small, I decided to build a new vCenter Server from scratch rather than go through the upgrade process (mainly due to wanting to put vCenter on a virtual computer, upgrade the operating system to 64-bit, separate the VCDB on an external SQL Server etc.).

  I'm hoping to do an orderly migration where I vMotion VMs off-a former host, upgrade to vSphere 5, and vMotion the VMs, then turn it back on for her.

  My question is quite simple (I hope):

  Can I add vSphere 5.0 ESXi hosts and ESX 3.5 hosts in the same Cluster HA (assuming they are configured the same way in regards to the vSwitch and vMotion) after I added all hosts in vCenter 5?

  This is so that I can vMotion VMs ESX 3.5 hosts former on the new 5.0 vSphere hosts after an upgrade of the host.

  Virtual machines are all alive and I can't afford to have downtime...

  Thanks for your time...

  -Anthony

  Hi Anthony,.

  -There is no direct upgrade from ESX / I have 3.5 to 5.0

  -See link that has the checklist of HA and on ESX 35 x patch requirement inorder to add to 5.0 HA cluster

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.vSphere.avail.doc_50/GUID-BA85FEC4-A37C-45BA-938D-37B309010D93.html

  -If you upgrade VC25Ux, make sure that host certificates enabled, other wise HA configuration breaks down, link above has this info also

  -Yes, VMotion works between 5.0 ESX hosts and ESX35x whether network, CPU compatibility are according to the needs.

  Concerning

  Anthony

• Question on Vsphere upgrade from ESX3.5 update 3

  We currently have our VCServer and race, but I'll be upgrading for Vsphere 4.0 Update 1. To do this, I need to build a new server, because our current server is not compatible with the hardware requirements. First of all, is there an easy way to migrate the settings from one server to another? Also the networks I will build as my local lan and my dmz, network adapter settings, etc... be there when I take my guests on the new Vsphere server. Are the specific server VC parameters or appearing in ESX boxes themselves?

  jkoelker wrote:

  So since I only change my virtual Center Server and without changing the physical material of boxes ESX but upgrading from 4.0 I still need to worry recreate all my settings. Depending on your position, the parameters are all specific to the ESX boxes and not the server Vcenter himself? I read that correctly? The only thing that happens is my Vcenter server. I'll put as the utility to update on what will update my esx boxes and Vsphere.

  If you do an upgrade to ESX4, so yes all the settings will be retained.

  I was under the impression that you have been rebuild the ESX host, that would be my choice of the upgrade.

• The upgrade from esx3.5 to esx 4.0 license

  Dear team,

  I bought ESX 3.5 and vc 205 recently licenses now is possible, I can go to esx 4.0 without having to buy a new license?

  Please help me upgrade esx 3.5 to 4.0 license...

  Concerning

  Shamal...

  If you have an active support contract, you can do so without charge.

  Check out these links:

  Starting point for any upgrade issues (licenseing, technical): http://www.vmware.com/products/vsphere/upgrade-center/

  How to upgrade: http://www.vmware.com/products/vsphere/upgrade-center/upgrade.html

  Overview of licenses and license upgrade paths:http://www.vmware.com/files/pdf/licensing_howto_guide.pdf

  AWo

  VCP / VMware vEXPERT 2009

• Eager to HELP! On the upgrade from ESX3.5 to vSphere4.1

  Help! Help! Help! This problem has me stuck for a few days... Thank you all for your kindly help in advance!

  I need to upgrade 2 ESX 3.5 server to vSphere4.1, and I've updated vcenter from 2.5 to 4.1. VCenter is installed on one of the virtual machines in ESX3.5 server (let's call this node-A, another node-B ESX Server).

  I intend to upgrade the node-B, then move vcenter and Update Manager from node A to node B, and then to upgrade node-A. This process is OK?

  For the upgade process:

  I had Manager Update installation on another virtual computer on node A and download the ESX4.1.0.iso of "Host upgrade releases" using the vSphere client. Then I create a new baseline, choose the option to upgrade host base type and select a data store that resides on the local disk on node-B. Fix this reference to the node B, node b, then analyze the updates, result shows that this basic line is non-compliant. I don't know why it is non-compliant, I found not the newspaper.

  Any tips on that? Thanks to you all!

  The clean-up operation will not proceed if you got under virtual machines on the host you are trying to clean up.

  Now, if you have configured mode fully automatic DRS, everything will be done for you (when you start the operation of sanitation, the host is placed in maintenance mode, then all running virtual machines are evacuated to another host). Otherwise, you'd have to all VMs running manually vmotion to another host.

• upgrade from ESX3.5 Update 1 for update4 ESX3.5

  Hello I have a group of 10 ESX3.5 update1 servers in the environment of having shared storage for virtual machines. My VC is already 3.5 update4. I need suggestions on how best to upgrade ESX3.5 update1 to ESX3.5 update4 without any downtime (if possible, which I think is possible can I vmotion virtual machines to other hosts in the cluster). Any reference to specific document to update the upgrade only would be very useful. Thank you!

  VMware Update Manager is the best way to go.  Simply create a base line, attach it to your cluster and clean up against it.  VUM will automate the process by issuing a 'to enter maintenance mode' of the host, all virtual machines off migration to other hosts in the cluster, putting the host in maintenance mode by rebooting and taking the host out of maintenance mode... Rinse and repeat.

  If you do not Crossover, you can always do the process manually by using DVD media and choosing "upgrade".

  and finally if you want to you can do using esxupdate

  http://www.VMware.com/PDF/vi3_35/esx_3/R35/vi3_35_25_esxupdate.PDF

  http://www.VMware.com/PDF/vi3_vum_10u2_admin_guide.PDF

  http://www.VMware.com/PDF/vi3_35/esx_3/r35u2/vi3_35_25_u2_upgrade_guide.PDF

• The upgrade from ESX3.5

  I intend to improve 3.5 U2 to U4 production environment. Definition of ESX for maintenance mode is perfect, but after the upgrade the upgrade of VMware ESX tools should be mounted on all virtual machines that require the restart of these VMs. in this case all of my production.

  Forgive me, but what is the point of the maintenance mode if you still need your complete production environment is restarted?

  MikeWazowski wrote:

  I confirmed in my test environment that goes from U2 U4 require the update vmtools. Restart also required.

  In the release notes for U4, he states that VMware tools will require an upgrade

  http://www.VMware.com/support/VI3/doc/vi3_esx35u4_rel_notes.html

  Need to plan the basis by restarting server. Thank you all for your answers

  Discover RVTools , it will help in the automation of your comment tools.

• Suggestion on the move from ESX3.5 to ESXi4.1 in mixed environment

  Hi people,
  I just wanted to know regarding the upgrade from ESX3.5 to ESXi 4.1. In my environment, there are 40 ESX ESX 3.5 version with 2 having 4.0 with SAN and DAS storage, but due to budget constraints we modernize only 5 ESX to ESXi 4.1 and the rest may be later. Need to know everything by keeping these diffirent version ESX in a mixed environment in different cluster will be no problem from the point of view of performance. Any suggestion will be highly appreciated. VCenter version is 4.1

  Thank you
  vmguy

  They works perfectly on servers ESX 4.x = you will not be able to move the ESX host 3.5 without decommissioning of the virtual hardware

• Direct upgrade from esx 3.5 to esx 4.1

  Hello

  I've already upgraded to vCenter 2.5 to 4.1, now I'm upgraded by train from esx 3.5 to esx 4.1 and all of the articles and videos that I have read say that I need to download the upgrade zip file and do the upgrade through VMware host update utility (as I am only upgrade 2 hosts).

  However, when I try to download the zip file, the only option I get is

  ESX 4.1 Update 1 (updated the ZIP of ESX 4.0)
  Use this package with vCenter Update Manager 4.1 U1 or vihostupdate vCLI or esxupdate command line to upgrade ESX ESX 4.0 to ESX 4.1 update 1.

  Which allows an upgrade to version 4.0 (or if she says).  Can I use this zip file?

  I even went back through all the versions 4.0, and there is no upgrade for 3.5 anywhere zip file?

  How can I make this update of the utility of the upgrade using the host?

  Concerning

  Steven

  In my view, an error in the above steps.

  Are you using ESX and ESXi, you will need to download ESX 4.1 install ISO for upgrade from ESX3.5 to ESX4.1 driver

  You must use vCenter Update manage or esxupgrade.sh for upgrade. No other tool as vihostupdate, host update utility etc. are not supported.

  For more details from vCenter update manager, refer to the admin guide and for esxupgrade.sh, see http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1009440&sliceId=2&docTypeID=DT_KB_1_1&dialogID=170100028&stateId=1%200%20170096294

  Thank you

  Nithin

• Upgrade from Windows XP to Windows 7 Home Premium SPI1 32 bit

  I bought Windows 7 upgrade from Windows XP. I ran the Windows Upgrade Advisor and says he is good to go. Back up the entire computer, deleted all devices and followed the steps listed on the MS site «upgrade from Windows XP to Windows 7» He has never completely installed and when I reboot, I get the BSOD. I have no way of getting back to the screen (even in any Safe Mode) start. Right now the BSOD States: STOP: 0X0000005C (0X0000010B, 0 x 00000003, 0x00000000, 0x00000000).

  I read all the instructions on this forum community and all State guidelines for work in the start menu. I can't go to the start menu! Then he said to start from the Windows XP disk, I do not have the disk... never did! I paid $150.00 for this patch that is useless. When I'm in the start up screen it then gives me the option to revert to the earlier version of windows. I'm used to be able to do so and continue with Windows XP. Now it won't even let me do that it gives an error code "Unmountable_Boot_Volume".

  I know that this is directly related to the upgrade to Windows 7. I've seen hundreds of messages with the same number. What can I do at this point in order to erase the entire hard drive or simply go back to Windows XP.

  Any help anyone can offer would be MUCH appreciated. Yet once, I can't start screen. It starts to load Windows XP and stops immediately. And if I need the Windows XP Recovery discs... How can I do?

  Computers that are preinstalled with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  This is how the recovery partition is accessible to most popular brands...

  For HP, press F11 directly after switching on the device

  You can also try F10 if its an old unit.

• How to set up * application and the workspace of static files after upgrade from 4.2 to 5.0?

  Hello.

  I just upgraded from 4.6 to 5.0 on Windows 7 64 bit.  ADR 2 and Tomcat running.  The APEX and my app runs.  Images of the APEX are OK.

  Problem: Application and do not display images of working space.

  Here are the different paths:

  • C:\apache-Tomcat-7.0.59\webapps\i
  • C:\APEX\images

  I copied the content of the APEX webapps\i images directory to the tomcat directory.

  I ran the two flavors of the loading image script, and each completed without error.

  • SQL > @apxldimg.sql c:
  • SQL > @apex_epg_config.sql c:

  I am able to log in administrator mode or developer APEX, and everything looks very good and works well.

  I can't connect to my request and it works, but the images, for example, the logo is not displayed.  The application CSS file is not currently in use.

  The source of the page shows that in the head of <>, where "pva" is the name of workspace:

  "" < link rel= "shortcut icon" href= "pva/static-files-not-configured/files/static/v4Y/eprentise_favicon-32x.png" type= "image/x-icon" / > "

  < link rel =" style sheet " href =" PVA/static-files-not-configured/Files/static/v4Y/epr_4_6.CSS " type of =" text/css " />

  This is the logo of the hgroup > < body > <

  "" "< a href="f? p = 520:1:1212525121720" id="uLogo"> < img src="pva/static-files-not-configured/files/static/v4Y/eprentise_default-logo.png" alt="eprentise demo" title= 'eprentise demo" height= "50" / > < /a > "

  #WORKSPACE_IMAGES # = pva/static-files-non-configured/files/static/v4Y /, which is considered in the places above.

  
  

  #APP_IMAGES # = pva/static-files-non-configured/520/files/static/v2Y /, where the application_id is 520.  These images are not either

  
  

  My understanding is that the images of the workspace and the app are not stored in the file system in the results directory.
  

  
  

  Advice or a pointer to the documentation on how to configure static files for application and space images of work and for the application CSS file?

  
  

  Thank you

  Skip
  

  Hi Skip,

  If you are using ADR the next chapter in the ADR of the installation guide part is important to you. https://docs.Oracle.com/CD/E59726_01/install.50/e39144/listener.htm#HTMIG29472

  In particular, the following note in "on the configuration of the RESTful Services.

  RESTful services ask Oracle 2.0 or subsequent REST Data Services. RESTful Services configuration is necessary when upgrading to Oracle Application Express version 5.0 and RESTful Services were not configured in a previous version.

  Concerning

  Patrick

  Member of the APEX development team

• Upgrade from 6.0 to 6.2 horizon view

  Hello

  I will update 6.0 seen Horizon to 6.2 in two weeks. I read the guide 6.2 upgrade and have my flattened upgrade plan, more or less.

  Now that I'm not sure of the East (this is the first time that I am ignorant version), is / was there of any changes from 6.0 to 6.1 which must be taken into consideration, but is not mentioned in the guide to 6.2 day?

  Also, I currently don't have implemented SSO implementation. How the look of the task would get SSO running? Think to implement SSO before the update... one thing at a time...

  High level of questions, I know. But I am happy to provide more details if it is necessary.

  Thank you

  The date of issue for Horizon view 6.0.1 6.0.2 6.1, 6.1.1 in detail what is included in this version.  The release notes for 6.2 will include shades or known issues related to the upgrade to this version.

  It does not appear that the upgrade from 6.0 to 6.2 is supported.  Page 11 of the upgrade guide indicates that the 'latest version of VMware Horizon 6.0 (with view) maintenance, which is 6.0.2"is the supported platform that allows to upgrade.

  Also, when the upgrade of your Agent view, uninstall existing agent, restart and install the new agent of 6.2.

  Check the Product Interoperabiity matrix to ensure your versions of vSphere and vCenter are supported in point 6.2.  Also, do not forget to check your version of DB is supported in 6.2 (for the composer and DB events) here.

• Lack of Configuration section in VAMI, vCenter active watch is not Accessible after upgrade from 5.5 to 5.8

  Hi all!  I'm having a bit of a problem that I can't find a solution for anywhere.

  I have a lab with two boxes of vcsa under 5.5 U2d, and wanted to move to 5.8 SRM.  I started the VRA 5.5.1 (I do not remember, real version number which was with MRS 5.5.1), mount the ISO 5.8 on both sides, restarted both, took the update of the CD (following the official update steps), but after the restart, the two vCenters show "enabled (not available)" and still list it as 5.5.1.

  I have validated the RV service is running.  I have been following this thread, regenerated certificates for the TWO vCenters & TWO VRAs: vsphere upgrade from 5.5 to 5.8 Server replication enabled (not accessible) has yet no joy.

  I checked the CROWD and the IP address is correct.  I tried to check /opt/vmware/hms/conf/extension.xml for the thumbprint and the file does not exist on each box, the only thing it is extension - template.xml.

  On the one hand, I have reset the vCenter database (/ usr/sbin/vpxd - d of VMware KB: reset the vCenter Server repository embedded for vCenter Server Appliance 5.x ), deployed a new VRA 5.8, and he had to register very well.  It's then it dawned on me what missed me: almost all the Startup Configuration where you specify the vCenter (see attachment)

  For grins, I recorded the VRA 5.8 of the 'old' vcsa work and tried to save it to the 'new' vcsa, which he could not with a lot of what looked like errors, assuming that because of 'new' vcsa already having a recorded SOAP VRA.  I re-recorded it back to the 'old' vcsa and is happy.  Installed SRM 5.8 (uninstalled 5.5 because I started with a clean database in the vcsa) and all is well on the side of the 'old '.

  I'm trying not to go this route on the 'new' side, as I a VDS, vSAN and twice as many hosts, so I won't recreate the vDC, cluster, add guests, etc.  I copied to /opt/vmware/hms/conf/extension-template.xml /opt/vmware/hms/conf/extension.xml and restarted.  Footprint arises, but still no configuration tips.

  Anyone have any ideas?

  Thanks for your reply. You said that the VRA is on a cluster, East of thatcluster HA-enabled? Because where HA must restart the VRA on another host, it does so through the ESX host and this could have emptied the OVF environment. And to even you'll always a working configuration until you start the upgrade or you try to perform any operation through VAMI configuration page. To be on the safe side, I think before upgrade, you can power off and then turn the unit on (simple restart is not enough) to make sure that the EPS of the FVO is recreated.

• vCenter Storage Monitoring Service Service initialization failed after the upgrade from 5.1 to 5.5

  I recently upgraded from vCenter 5.1 to 5.5. After the upgrade, I started getting health warnings for the VMware vCenter monitoring of Storage Service that say "failed to initialize the Service." I restarted the vCenter server and restart services several times and who has not deleted the question. When I look in the SMS. LOG file there is no activity in it since I did the upgrade (a week or more there). All prior activity in the SMS. JOURNAL seems to be well upward until the upgrade took place though. I found at least half a dozen KB articles that describe the various reasons why this error may occur, but they all relate to older versions of vCenter. Just to be complete, although I saw the symptoms in the articles and none of them really seem to be the same as what I see. My hypothesis is that perhaps the SMS did not get properly re-installed upgrading because I don't see any SMS subdirectory in the directory \Program Files\VMware\Infrastructure\tomcat\webapps but I do not know if this directory must exist on a 5.5 installation.

  If you would be grateful if anyone has any advice for troubleshooting for this type of error.

  Thank you

  Mike

  Change the credentials of the service account for VMware vSphere Profile-Driven Storage Service to those used to start the VMware vCenter Server service and the service of VMware VirtualCenter Management Webservices. By default, the account used Local System.

  Restart the service, the change was made, and then check.