The upgrade from esx3.5 to esx 4.0 license

Similar Questions

• The upgrade from ESX3.5

  I intend to improve 3.5 U2 to U4 production environment. Definition of ESX for maintenance mode is perfect, but after the upgrade the upgrade of VMware ESX tools should be mounted on all virtual machines that require the restart of these VMs. in this case all of my production.

  Forgive me, but what is the point of the maintenance mode if you still need your complete production environment is restarted?

  MikeWazowski wrote:

  I confirmed in my test environment that goes from U2 U4 require the update vmtools. Restart also required.

  In the release notes for U4, he states that VMware tools will require an upgrade

  http://www.VMware.com/support/VI3/doc/vi3_esx35u4_rel_notes.html

  Need to plan the basis by restarting server. Thank you all for your answers

  Discover RVTools , it will help in the automation of your comment tools.

• The upgrade from older version of ESX

  Hello

  I have 3 esx (esx a, b esx esx esx 3.01 c) in a cluster to say Cluster 1 and 2 (esx d and e esx) tell of 3.02 in another cluster, cluster 2. The VC is 2.0.

  Is it possible for me to first switch the VC to 2.5 and go then the esx say 2 weeks later and will be the last VC to manage the existingesx 3.01 and 3.02?

  If I want to perform an inplace upgrade. Am I right to say that I have A ESX ESX B and C ESX vmotion, then stop ESX A. Discconct ESX in SAN, then boot from the CD and it will be automatically upgraded to the new version? This is the way recommended and upgrade?

  If I'm going to maintenance mode, a little curious how can the CD ESX 3.5 can be configured to be bootable fo the upgrade?

  Finally, I have about 80 VM and how do I set the VM in a faster way instead of connection in to each virtual a computer upgrade tools.

  Thank you for your patience

  Thanks Troy, really nice tool, it can even improve Linux VM, but does not restart such the VM (and tools do not start, so manual intervention is necessary, tested on Fedora8 & novel OES2 Suse)

  SEB

• Eager to HELP! On the upgrade from ESX3.5 to vSphere4.1

  Help! Help! Help! This problem has me stuck for a few days... Thank you all for your kindly help in advance!

  I need to upgrade 2 ESX 3.5 server to vSphere4.1, and I've updated vcenter from 2.5 to 4.1. VCenter is installed on one of the virtual machines in ESX3.5 server (let's call this node-A, another node-B ESX Server).

  I intend to upgrade the node-B, then move vcenter and Update Manager from node A to node B, and then to upgrade node-A. This process is OK?

  For the upgade process:

  I had Manager Update installation on another virtual computer on node A and download the ESX4.1.0.iso of "Host upgrade releases" using the vSphere client. Then I create a new baseline, choose the option to upgrade host base type and select a data store that resides on the local disk on node-B. Fix this reference to the node B, node b, then analyze the updates, result shows that this basic line is non-compliant. I don't know why it is non-compliant, I found not the newspaper.

  Any tips on that? Thanks to you all!

  The clean-up operation will not proceed if you got under virtual machines on the host you are trying to clean up.

  Now, if you have configured mode fully automatic DRS, everything will be done for you (when you start the operation of sanitation, the host is placed in maintenance mode, then all running virtual machines are evacuated to another host). Otherwise, you'd have to all VMs running manually vmotion to another host.

• Suggestion on the move from ESX3.5 to ESXi4.1 in mixed environment

  Hi people,
  I just wanted to know regarding the upgrade from ESX3.5 to ESXi 4.1. In my environment, there are 40 ESX ESX 3.5 version with 2 having 4.0 with SAN and DAS storage, but due to budget constraints we modernize only 5 ESX to ESXi 4.1 and the rest may be later. Need to know everything by keeping these diffirent version ESX in a mixed environment in different cluster will be no problem from the point of view of performance. Any suggestion will be highly appreciated. VCenter version is 4.1

  Thank you
  vmguy

  They works perfectly on servers ESX 4.x = you will not be able to move the ESX host 3.5 without decommissioning of the virtual hardware

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• The upgrade from Photoshop Elements 10-15?

  Hello.

  Is it possible to upgrade Photoshop Elements 10 directly to 15, No 11-14 versions?

  Thanks, Jenny

  Yes, you can get the upgrade from any previous version.

  See what's new:

  99jon tech: Adobe Announces Photoshop Elements 15

• The upgrade from 11g to 12 c

  Hello

  We intend to improve our databases of 11g (11.2.0.3.11) to 12 c (12.1.0.2). We would like to know what are the steps that we need to upgrade the position.

  (1) all 11 g AWs automatically updated to 12 c? or do we rebuild US 11g AWs on 12 c after the upgrade? (We had to rebuild AWs after upgrading to 10g and 11g)

  (2) are there accessories performance in 12 c, which will apply to only AWS built on top of the 12 c?

  (3) we have an AW 10 g 11 g-based. Is it still compatible with 12 c AW?

  Thank you

  Dietsch.

  Hi dietsch,

  My answers are online.

  (1) all 11 g AWs automatically updated to 12 c? or do we rebuild US 11g AWs on 12 c after the upgrade? (We had to rebuild AWs after upgrading to 10g and 11g)

  The upgrade from 11g to 12 c requires no AWs to rebuild.

  (2) are there accessories performance in 12 c, which will apply to only AWS built on top of the 12 c?

  He might have a few new optimizations that have been incorporated into the version of 12 c of the AW you will not have access to until you rebuild the AW, but that does not prevent you from using the 11g version of the AW of 12 c.

  (3) we have an AW 10 g 11 g-based. Is it still compatible with 12 c AW?

  Yes, 12 c is backward compatible with an AW 10 g.

  In addition, once you upgrade it has some new features that you can use for OLAP.  The display below describe some of them.

  OLAP roadmap

  Thank you

  Ken Chin

• The upgrade from VMware Workstation 12: can I install above?

  So I just bought a license to upgrade to workstation 12. Now, I noticed that it is (finally) 64-bit native. However, 11 Workstation is native 32-bit. Can I just install VMware Workstation 12 top like I did the upgrade from 10 to 11? Because the 10 and 11 were native 32-bit.

  The question is moot.
  Upgrade has always meant uninstall the old version, install the new version.
  If you do it yourself, you have more control, but the results will be the same.

  The safest option is: uninstall manually - reboot - check registry for services that have not been removed - if necessary, repair registry - restarts again and then install the new version right after the restart.

• How can I talk to a HUMAN being on the upgrade from Design Standard CS6

  How can I talk to a HUMAN being on the upgrade from Design Standard CS6?

  See my response to your other thread and provide more information. Adobe does not propose to hold your hand, especially on weekends, but you can always try to chat with one of the guys Indian support via the support pages...

  Mylenium

• request upgrade from esx3.5 u4 to vsphere

  Hai

  I have sucessfully upgraded my test server with 1.5 TB of LUNs from esx3.5 to esx4.0, now I want to do to my site of production company there 4 host ESX 3.5 and 28 live servers.

  precautions, I don't have to the improved test improved vcentre and

  (1) stop the virtual machines

  (2) esx moved into maintenance mode

  (3) installation of the update hosted started noted that esx 4dvd iso image and updated successfully

  (4) improved vmtools

  (5) virutl hardware upgrade

  now, I'm going for my production site

  Here are the General steps that I followed, but my production cluster has 28 vms in common 2 TB lun

  In addition to the closure of vms, what should I do for the lun, should I leave the lun connected to esx during upgrade (before I left it as it is) and upgraded successfully, but it's my direct environment and I don't want to

  have any disaster

  all tips are welcome

  VAMSi

  Hello vamsi,

  You do a uprgade. You will lose all of the settings.

  Recognize your LUN will subsided.

  Puts goede groeten

  Davy Vermeir

  Network engineer

  Dir. phone: + 32 (0) 3 451 32 39

  Aurelium, people benefiting from ICTS

• Upgrade from ESX3.5 to vSphere 5.0

  Hi all

  I have a project to upgrade on update my old host ESX 3.5 and VirtualCenter 2.5 to the most recent and vSphere vCenter Server 5.0 and 5.0.

  After having read in the doc upgrade and because of the environment is small, I decided to build a new vCenter Server from scratch rather than go through the upgrade process (mainly due to wanting to put vCenter on a virtual computer, upgrade the operating system to 64-bit, separate the VCDB on an external SQL Server etc.).

  I'm hoping to do an orderly migration where I vMotion VMs off-a former host, upgrade to vSphere 5, and vMotion the VMs, then turn it back on for her.

  My question is quite simple (I hope):

  Can I add vSphere 5.0 ESXi hosts and ESX 3.5 hosts in the same Cluster HA (assuming they are configured the same way in regards to the vSwitch and vMotion) after I added all hosts in vCenter 5?

  This is so that I can vMotion VMs ESX 3.5 hosts former on the new 5.0 vSphere hosts after an upgrade of the host.

  Virtual machines are all alive and I can't afford to have downtime...

  Thanks for your time...

  -Anthony

  Hi Anthony,.

  -There is no direct upgrade from ESX / I have 3.5 to 5.0

  -See link that has the checklist of HA and on ESX 35 x patch requirement inorder to add to 5.0 HA cluster

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.vSphere.avail.doc_50/GUID-BA85FEC4-A37C-45BA-938D-37B309010D93.html

  -If you upgrade VC25Ux, make sure that host certificates enabled, other wise HA configuration breaks down, link above has this info also

  -Yes, VMotion works between 5.0 ESX hosts and ESX35x whether network, CPU compatibility are according to the needs.

  Concerning

  Anthony

• Question on Vsphere upgrade from ESX3.5 update 3

  We currently have our VCServer and race, but I'll be upgrading for Vsphere 4.0 Update 1. To do this, I need to build a new server, because our current server is not compatible with the hardware requirements. First of all, is there an easy way to migrate the settings from one server to another? Also the networks I will build as my local lan and my dmz, network adapter settings, etc... be there when I take my guests on the new Vsphere server. Are the specific server VC parameters or appearing in ESX boxes themselves?

  jkoelker wrote:

  So since I only change my virtual Center Server and without changing the physical material of boxes ESX but upgrading from 4.0 I still need to worry recreate all my settings. Depending on your position, the parameters are all specific to the ESX boxes and not the server Vcenter himself? I read that correctly? The only thing that happens is my Vcenter server. I'll put as the utility to update on what will update my esx boxes and Vsphere.

  If you do an upgrade to ESX4, so yes all the settings will be retained.

  I was under the impression that you have been rebuild the ESX host, that would be my choice of the upgrade.

• HP Pavilion PC 15-p207TX NB: the upgrade from normal to backlit keyboard

  Hello

  My product is HP Pavilion 15-p207TX NB PC. I want to know that is it possible to change the keyboard from normal to backlit keyboard... ???. I have

  f Yes what is the cost.

  And one more thing, my laptop is in warranty if I change my keyboard it will affect... ??

  Thank you

  Hey @Shivam123,

  I understand that you are looking to upgrade your keyboard to a backlit keyboard.

  This is HP Pavilion 15 Notebook PC Maintenance and Service of Guide. You will see that it says full size backlit 3 paint coat Island-keyboard with black pad with LED red is listed because some models (Pavilion 15 or 17 Pavilion) came up with this type of keyboard.

  When I look at the HP PartSurfer's using your specific model number, there is no option to use the layer full-size backlit 3 paint Island-keyboard with black pad with LED red.

  If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

  If you need assistance, please re-post with the results of the resolution of problems and I would be more than happy to do my best to provide an alternative.

  Have a great day!

• After the upgrade from Vista Home Premium to Windows 7, I can't connect to my router (Netgear WNDR3300)

  After that upgrade from Vista Home Premium to Windows 7 - I'm unable to connect to my router (Netgear WNDR3300) - message network States "the settings saved on this computer for the network do not match the requirements of the network" - any ideas what could have changed during the upgrade to make me lose my connection to the wireless router?

  Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft