Requirements of power supply for the HD 5850 2 GB

Similar Questions

• Change of power supply for the Alienware Aurora r4

  Hello, since my diet is reel whining I would change it

  I was looking for a bit of the PSU and found this one

  http://www.EVGA.com/products/product.aspx?PN=210-GQ-0850-v1

  is it good?, fit into the section of PSU aurora r4? It will connect to the back plastic, that normal power supply is connected to the rear?

  Also I don't know anything about sata cables, but there so much that normal power supply I mean it will be able to connect to what it is now? (only the change requiring more sata is the addition of two extra hdd/ssd (there was a spare sata cables))

  and... I need something more than that? (some wires or something?

  I have not wand to buy the same PSU again because seeing how it survived...

  Hello. I will address this, knowing that other users information. Your old harness case will be removed, the new chassis will have its own cables. The EVGA 850 GQ is ok, but the G2 is better, you can find them on Newegg / eBay / EVGA.com etc.

  I posted here, p4 #31, a list of links to swap & material, then go ahead, some links redirect here, like this:

  • Aurora ALX (mid-2010) - replacing the PSU - problem with Cages HD

  

  No - ALX a front SATA, so work of any type of SATA cable

  

  Chassis rear a SATA ALX

  

  who need some type of head SATA short height, like the originals

  • ALX not can use either type, due before access
  • ALX must use 'pass-thru' heads, like the originals, if the power is connected to the wall box

  

  EVGA uses these types of base with non - ALX SATA heads

  

  "standard heads.

  

  above, my Corsair cable has ALX-type amp heads:

  • the plastic is a two-piece, the rear insulation snaps off the coast
  • in an ALX installation, with the cable above, I would jump off the top, cut the wire to length, & apply two heads on it to mimic the original as close as possible

  If I had the EVGA SATA type?, I want to buy x 4 amp heads online:

  • frozen & perfpcs

  

  Note the two types of rear covers: "cap" (for superior insulation) & pass-thru-cap

  I would use these to "build" my own pair of cables to match the original cable pair, best I could. I could just shop any spare cable to amp heads, like here. My ALX has a set of hand-made cable, I already have the SATA cable mod, so they mimic the original case harness. Chassis no - ALX may not be no need for this type of care

  cs_setInnerHtml ('video_52a58bc9-1a1c-4f67-920c-275deafe8f88', ");

  Video: If your ALX means that you must transfer new SATA faces on

  

  note of the need for the extra long screwdriver get screw wall box

  Search "Power of Aurora" (Exchange of Aurora psu) or similar terms, search for images which could connect you to the messages posted by other users

  • not that X-Fire / SLI configs do best when using flat ribbon cables
  • EVGA uses sleeved around cables, cable so better manage you can

  "" All ATX power supplies are 5.9 "x 3.4", it's length is variable, & 'all' chassis PSU "should" adapt Aurora R1 - R4, with a chassis length 7.5"(190 mm) & shorter: example EVGA G2 is 7.1" length = ok, & my Seasonic 1250 is 7.5 "length, about maximum a person wants. Please read everything in all the links I already posted in, I won't be able to help beyond what I posted here. The G2 if it feels right for your case & know-how (=

  • SEASONIC Platinum 860 & plate 1050have Ribbon types
  • Corsair RM850i Gets a 9.9/10 JonnyGuru, world best PSU review site & forum, also has the ribbons dishes, $ 130 after rebate

• Need the dimensions of XPS8300 power supply for the upgrade.

  So I bought a Dell XPS 8300 on sale Black Friday mainly because of the processor, RAM and HARD drive.  I need a new computer and wanted it to be fast but also wanted a desktop computer, because I intend to upgrade to a better quality of game.  I plan on upgrading the graphics card to a Geforce GTX 560 Ti FPB.  I understand that this will require a more powerful power supply and seeks to those at the moment, probably a 760W supply.  My concerns are mainly regarding the power supply box installation.

  Currently my XPS 8300 has a 7P3WV 460W power supply.  Part # H460AD-00.  Someone has dimensions on this so I can get a power supply that will compete?

  Or if no dimensions does anyone know of a compatible PSU?
  

  Finally, I intend to switch on the case and motherboard and all simply transfer on the parties but that is further down the road.

  Thanks in advance!

  nefastusaequitas

  Generic standard ATX power supply can be installed, with a power of 20 + 4 pin main motherboard, or 24 pins as the XPS 8300 has a rear panel open, with or without the on/off switch.

  You should be able to buy a compatible power supply either a local computer or online store.

  Note: A power supply with four SATA power connectors, is necessary.

  Bev.

• Where can I find a power supply for the IdeaPad A2109?

  How are you?

  Looking for an another power for the A2109 adapter...

  Havnt found the original in eBay...

  Anyone know where to find the power adapter?

  Is if not the original - a generic alternative in good quality?

  All the details? Please do not hesitate to give!

  Thank you very much!!!

  Houda says:

  So maybe I just need to look for any 5V 2A adapter and that's all?

  Yes, find a 5V 2A adapt.  Those designed for smartphones are usually 5V 1A, so the A2109 load really slow if you use one of these.

• Need new power supply for my HP p6210y

  Hello

  I have a HP p6210y (http://support.hp.com/us-en/document/c01859864) and I need to upgrade the power supply for the Radeon HD 4890 I have now. I am reviewing the PSU below. However, the dimensions are actually smaller than my current diet. Who's going because of my problems in terms of ride it properly in the case?

  http://www.Newegg.com/product/product.aspx?item=N82E16817338038

  If this will cause problems, can anyone suggest a power supply (it's the exact size as my current) which would be suitable for my graphics card. I need "500W with two connectors to power 75W 6-pin PCI Express.

  Thank you!

  I believe that the PSU is designed for a different style of the case. Discover the Corsair CX500, or CX600 power supplies. They are highly recommended and are favorite forum. In addition, they are only slightly larger than the stock power supply HP and are known to adapt.

  Frank

• The upgrade of the power supply for a HP Pavilion 500-054

  Hey people,

  I'm changing the 500-054 flag so that it can play a few games, not a hardcore gamer, just want to be able to play the occasional game. I want to get a lower end external video card, but this requires a power supply greater than 300. I am looking for a new power supply for my computer, but I couldn't find one for the 500-074. Are the ones that will work for my computer or I am a hopeless case?

  Thank you

  A standard ATX power supply will work. Please look at the Corsair CX430, CX500, CX600, or their variations of modular cables for your needs.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Power supply for use in the UNITED Arab Emirates

  Hello

  I just bought a Time Capsule of the airport and an Apple TV (4th gen).  I'm moving to Dubai for work and I intend to take with me.  I can't find out how to replace the power supply for use in Dubai (plug type G).

  • Can I just buy a travel voltage converter?
  • What is the frequency difference (US is 60 Hz and UNITED Arab Emirates is of 50 Hz)?
  • Could I just buy a 'EnergyPal travel Charging Station ETCS04' and connect directly?

  Thanks for any help!

  The airport Time Capsule and the Apple TV work on 100-240 Volts and 50/60 Hz automatically, so they'll work pretty much anywhere in the world if you have the map of the right ankle.  A voltage converter is NOT necessary.

  You can buy the cards you need to any store from the airport, luggage, in Dubai store, etc., most of the hotels the.  If I remember correctly, Dubai uses the same type of plug that she used in the United Kingdom, as well as should work as well.

  http://www.Amazon.com/Ceptics-grounded-Universal-Plug-adapter/DP/B0080R95XI/ref= sr_1_1? ie = UTF8 & qid = 1455557366 & sr = 8-1 & key...

  I do not think that the higher 5 GHz channels are permitted in Dubai, so be sure to put the time Capsule to use a lower numbered GHz 5 channel... 36, 40, 44 or 48.

• Replace the power supply for a Pavilion a140n

  How to install a new power supply in a HP Pavilion a140n? Is there a step by step guide?

  Zz30fg, welcome to the forum.

  Is the model you list correct?  I can't find anywhere.

  Before you start, I suggest that you measure existing power supply unit (PSU) to make sure that the one you choose to insert in the space provided.

  The first thing you will do is turn off the computer.  Disconnect all devices that are connected, for example, keyboard, mouse, printer, etc.  Once done, remove the side cover of the case.  There are two or more screws on the back of the computer that you have to remove.  Then slide the side gently to the rear.  Put it somewhere safe.   Be sure to touch the metal inside of the case before touching any components.  This will eliminate static electricity (ESD).  Now you can disconnect the cables from the PSU.  This is where it gets a little tricky.  I normally take a picture of the connections and mark them as clearly as possible on the motherboard.  Believe me, you'll be much happier if you do.  Once this operation is complete, it is time to remove the (4) screws that hold the power supply in place.  Hold it with care.  If it falls it can damage other components.

  The new power supply will be marked with the appropriate connector cables.  At this point, it's just the opposite of what you were doing to uninstall the existing PSU.  Install the power supply into the case.  Do not overtighten the screws.  Make sure that the cables are inside the case.  Once in place, carefully connect all cables to the appropriate connectors.

  If you have any other questions, I will watch this thread for you help.

  If your problem is solved, please click "accept as a Solution.

• Choose the right power supply for hp P6180t

  Hi I'm going to buy a new power supply soon for my HP pavilion p6180t desktop computer and I started a 300w to the corsair cx750 power level. I also want to get a new graphics card soon something in the mid-range. I was wondering if this power supply is the right choice, or if its too much for my computer because I read in another forum that you do not want a power supply with a lot more power you will actually need. For a gtx 660, the minimum is 600w I think so I wanted to just make sure that the power supply is the right choice for my computer. Thank you

  In fact, I think that the minimum for a gtx660 is 450w. I think a 750w for this computer is excessive. A 500w would be a lot. But if you buy one with too much power is just a waste of money it actually will not cause a problem. Like putting gasoline in an engine that doesn't need only regular.

• Need help/advice on the upgrading GFX and power supply for PC p6754y

  Hi, I want to upgrade my computer (Hp Pavilion P6000 Series, model n ° p6754y) so I can play new games such as Skyrim or Battlefield 3 on ultra. I don't know too much about computers, and it would be my first time upgrading mine. Here are the parts I have in mind.

  POWER SUPPLY

  http://www.Newegg.com/product/product.aspx?item=N82E16817341017

  GFX

  http://www.Newegg.com/product/product.aspx?item=N82E16814102908

  Please let me know if it works well with my computer or if you have other recommendations/tips instead.

  Thanks for the help

  Hello

  The power supply and the video card must be inserted.

  Try this link is your PC ready for BF3?

  Most PCs are not ready for BF3 and there is usually a faster video card and a bigger power supply.

• HP Elite 1090-T H8: seeking your suggestions for upgrading the power supply for a new video card

  I have a HP EliteH8-1090 t who is about a year, but with an AMD Radeon HD 6570 low power graphics card and a 450W power supply. I want to upgrade the 650W power to support the installation of a replacement graphics card.

  I tried to replace the HP 450W with Corsair TX650 and Corsair TX850 food. The system appears to power (DVD drawer opens and closes, the hard disks spin, fans run) with either a Corsair, he's stuck at this point. My system is unable to enter start mode when either power supply is installed - it seems stuck in a mode of seed, and the monitor still asleep.

  Can someone please advise on a compatible power supply for HP system? I'm puzzled by why a simple exchange of a power supply does not work. Just like a record, the system has a card mother Pegatron IPMTB-K (Truckee).

  Thank you!

  No problem. I wish you good luck with it. On a positive note the HX650 is a much better than the TX650 ILA unit internal quality and what I like is the best it's quite fan fan much quieter than the TX650 while helping your organization of cable being modular and help keep temperatures cooler in your computer case.

• HP 8200 elite CMT: can I use an external power supply for AMD Radeon HD graphics card 7770?

  I have HP 8200 elite CMT CPU in which 320 watts PSU is installed. I want to use AMD Radeon HD 7770 requiring more power (minimum 400 watts power supply) for maximum performance. But the fact is, the higher Watt PSU is not available for my cpu because its cables do not match that. So I ask if I can use the external power supply to power my GPU instead of the CPU power. Will be this harm to my PC?

  Kindly help me to solve this problem.

  Thank you

  Thank you for the information, @haseebkhan7310.

  I'm not a fan of using a separate power supply to power a video card.  It can cause problems.  However, here is a video that will show you how it can be done:

• do you need a power supply to the current entry with data acquisition or 9265

  Hello I just receive the NI 9265 Daq for research in my lab. I'm trying to present entry and display it on an oscilloscope. I don't get anything. I did some research on the internet, so my question is do you need a power supply to the current entry with data acquisition or 9265?

  Read the data sheet.  Clearly on the first page is a sentence which reads "the NI 9265 requires 9 V to 36 V external power.

• Power supply for a better video card update! Help!

  Thanks for looking at my post. I have a desktop PC HP Pavilion p6610f that runs on an operating system Windows 7 and Athlonll X 4 635 (P) 2.9 GHz (95W) processor. The office itself is really great, but I'm not able to run PC games so intended to update my video card. For this, I needed food uprage. It has 250 W.

  So my question is, can I LEVEL MY POWER SUPPLY UNIT? and if I can, that one you offer me to buy. Please give me the link. I was looking for a 600 and more watt power supply.

  Thank you

  Mickael

  The best solution will be fed back!

  Nassik19,

  Thank you for coming on the user forums. Given the simple request of a PSU 600 + W, here are some, with comments.

  When you look at these, please look at the pictures of the label of power amps for the + 12V / real sustained power.

  Adjust, 5.5 "depth, warranty 2 years, $50

  Roswill 700W continues:http://www.newegg.com/Product/Product.aspx?Item=N82E16817182191

  Need of 6.3 "depth, 3 years warranty, $110

  Corsair GS700 gamer: http://www.newegg.com/Product/Product.aspx?Item=N82E16817139024

  Requires a 6.3 "depth, 3-year warranty, $60 after rebate, but has 2 rails

  OCZ 700W Pro: http://www.newegg.com/Product/Product.aspx?Item=N82E16817341018

  I'm looking at 650W-600 units, but the Corsair and Ocz remained depth 6.3 "in the case. In addition, the 700W units were a better deal.

• Update on power supply for m9650f

  Does anyone have a recommendation for a power supply in the range of 600W they know works in the m9650f?  I want to update my video to a card ti 560 gtx requiring at least a PSU 500W with + 12 volt current rated for 30 amps.  I tried a power supply modular Thermaltake 775W (much more capacity I need, but the price was decent), but when I installed it, the machine would not start, publish, or display all errors, even with the original of the installed video card.  When I put the original PSU in the machine with the original card video, just booted normally.  Thanks in advance.

  Hello

  Corsair HX650 should work and you should have plenty of expansion capability that this power has 52 amps on 12V + rail.  I use HX 650 in my PC and I have the same motherboard as the m9650f.

  Corsair VX 550 has 41 amps on 12V + rail

  Corsair CX 600 has 40 amps on 12V + rail

  Corsair CX 500 has 34 amps on 12V + rail

  Try www.newegg.com for power supply selections more.