Requiring a LAN connection to share folders (ineffective p/w requirement)

Similar Questions

• I want to share folders on my xp pro sp3 PC. How can I configure it so that a login prompt appears when users connect to it as \\ip\shared... ?

  I want to share folders on my xp pro sp3 PC. How can I configure it so that a login prompt appears when users connect to it as \\ip\shared... ?

  Hi Kelvin,

  You can share a folder on your XP by the listed method: http://support.microsoft.com/kb/304040

  Others have an option to connect to your pc as a guest, to make interactive you will need to click on start-> run, type &-> gpedit.msc

  Navigate to Computer Configuration-> Windows settings-> Security-> Security Option settings. On the right side, look for-> ' access network: model sharing and security for local accounts "-> double click and select-> classic-Local user authenticate.

  Now another pc you can access this computer and you will be asked for the username and password.

  I hope this helps.

• Make an ad-hoc and share the LAN connection to the Wi - Fi

  How can I get the tab share for my mini HP laptop so I can make an ad-hoc and share the LAN connection to the Wi - Fi so I can get internet to my iPhone. (otherwise the laptop do a hotspot) window 7 I think I

  Hello

  I suggest you to see link and check if it helps.

  Set up a computer-to-computer (ad hoc) network: http://windows.microsoft.com/en-US/windows7/Set-up-a-computer-to-computer-ad-hoc-network

  Hope this information is useful.

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• How to share folders in icloud drive like dropbox?

  Hi, I wanted to share a folder with other people with Apple ID. However, I have not found any option in icloud drive. Is it possible to use icloud drive like dropbox and share folders with others?

  Unfortunately, this is not possible, if you have any suggestions that you think might improve iCloud you can send Apple your your comments here.

• How to make the computer to look for SBRIO on a LAN connection when wireless connections LAN and are active

  Hello

  I plugged my laptop to a SBRIO using a cable, I also did the same mask subnet the SBRIO and my wireless connection for laptop is also active. I run an application to transfer files from the network to the SBRIO. I was able to download the files from the network using the wireless, but when I try to transfer the files from the laptop to the SBRIO the application attempts to use the wireless instead of the connection to the local network. Is there anyway that I can apply to use the LAN connection instead of wireless?

  Thank you

  Mouda.

  You must manually configure the settings for the SBRIO and map NETWORK cable on the PC. They must be presented on the same subnet. Using the crossover cable, you can configure your PC to use an address like 192.168.0.10 with a subnet mask of 255.255.255.0. Configure the SBRIO to use an address as 192.168.0.11 with a subnet mask of 255.255.255.0. The PC uses the network connection by default for all addresses that do not match the specific subnet on teaching secondary (cable in your case) NIC

• LAN, connection bridge

  Hello, I receiving the net via wifi, I wanted to do a connection bridge between the latter and my LAN connection.

  Result a window opens saying must choose at least two connections, chose that I have already done several times but it's not market
  I try to return the local networks, the result is not a valid IP address, y ' has you there a solution to fix it, without losing my wifi connection
  knowing that I connect with UN VAT registration and password to a friend, because I don't have a direct connection internet
  Thank you

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• Without LAN connection after logon applied credentils it takes a lot of time to load items on the desktop

  Original title: startup problem

  during the priming of the laptop without LAN connection after logon credentils applied it takes a long time to load the items on the desktop, but by connecting the laptop with LAN a boot of the computer LAPTOP, all right, please provide a solution for this problem of starting.

  Hello

  I removed IE 8, now it works fine

• After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

  After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

  New Aspire E11, Windows 8.1

  Help, please.

  Here is how I fixed it:

  Go to control panel > network and Internet > network sharing Center

  Click on "Change adapter settings" in the left pane.

  Right click on your map. Select "Properties".

  There will be a box titled "this connection uses the following items."

  Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

  KEEP THESE CHECKED:

  Client for Microsoft networks
  QoS Packet Scheduler
  File and Printer Sharing
  IP v6
  Internet Protocol v4
  Driver Link-Layer Topology Discovery map IO
  Link-Layer Topology Discovery recall

  Uncheck everything else.

  Go to network and sharing, disable and re-enable the adapter.

• LAN Connection stopped working on my computer running WIN XP MEDIA CENTER

  My LAN connection stopped working on my WIN XP MEDIA CENTER-based computer. I have access to the internet with optimum online. I have a router connected to my cable modem (US Robotics) wireless and desktop with the functioning of the wired connection stopped. My wireless connection on my laptop works very well on the same network. I first stop the modem, router, computer and re started at all. Modem Router 1 2nd, then on computer. Usually works, but not this time. Contacted optimum online and went through some procedures to correct the problem. Open cmd prompt, ping tried only to get 3 of any answers and 1 reply. Tried ipconfg / renew, did not work.  Firewall had closed during all of this. Service representative from optimum online said that he could see my modem was working but something like a firewall was blocking my computer access. Tried ipconfig/all and gave him the ip address he asked which showed, 169.254.80.196, he said that address will not work and we continued trying to renew the ip address, and we could achieve.

  Now I mention here that this problem occurred when I had a power surge while I was online. I rebooted and this is the problem that I was. I asked the rep optimal online what else could be the cause as a virus or damaged surge my LAN or OS and he said for me to try to get in touch with microsoft and perhapse they could help me more. I hope someone has an answer for me.

  Please... Help!

  Thank you

  Don Soutar

  Watch 169.254.x.x IP address only:

  • The connection to the LAN is configured to obtain an IP address automatically, and:
  • He cannot communicate with your router to get the address.

  The surge may have damaged the computer's Ethernet card.  If so, replacing it with a new adapter will fix the problem.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• E4200 Lan LAN connection - how to access the router

  Just bought the E4200 (for a home network) and have implemented as a Lan - Lan connection success. My Siemens Spreadstream DSL modem 6520 provided by Bell Aliant (is a wireless router / and is used as DHCP).  On the E4200 as per instruction changed the IP of E4200 address to 192.168.1.2, turned off the DHCP and NAT set to disabled. The E4200 is linked directly from the SpeedStream ethernet port to ports numbered on E4200 (not the internet port). The SpreedStream also feeds a Linksys switch with 16 ports (SD216).  When I connect a laptop through the new E4200 wirelesss network, I am able to see the rest of my network fine.

  When I connect a PC with the CISCO software installed to one of the ports E4200 software cannot access router of the E4200. I type 198.168.1.2 as a web address, but cannot connect. My question is, after all, the background information is... How can I access my new router E4200 to make changes with my lan - lan configuration. I want to be able to add an external drive USD to USB port of the E4200 years set up the account of wireless of comments.

  Kind regards

  Kevin Reid

  Charlottetown,

  Prince Edward Island

  Canada

  Change the address LAN IP of the E4200 to 192.168.2.2. Except, however, if 192.168.2.2 is part of the Siemens server DHCP address pool. Check which addresses IP Siemens allows to assign by using DHCP. The E4200 address must not be included.

  If you have the latest firmware installed your E4200 takes the bridge mode. In bridge mode, you can use the E4200 as access point connecting with the internet port for your Siemens. This way you can also use network comments and other features that will not or do not fully work with the configuration that you have right now...

• Can not share folders with a vista home another computer on my network.

  Have two Vista PCs over a wireless network. They can see the other computer name in the network window.

  I can share files remotely via the public folder. Can share a printer also but I can't share folders via the option "share files from any folder on your PC.

  I put in place to share the folder names appears in the PC network to the remote address, but when I click on it to open it I get an access denied message.

  See if these help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-sharing-files-and-folders-in-Windows-Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials
  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

• Wi-fi/lan connection only works on some devices

  Hello... I have problem with wi-fi/lan connection. I work in a school with about 100 children. The problem is that some computers/phones/laptops can connect normally to a connection wi-fi/lan but some cant. The internet icon actually shows normal connection, but you cannot browse the internet. When this happen the only thing I can do to help temporarily change the mac address of the device with software changing Mac and which usually resolves it. So maybe the problem is that too many devices are connected at the same time or mac addreses interfere with each other or something. I have tried almost everytnig, reseting routers, change the settings of the router, changing channels, etc. of mac filtering... It was working fine before. Maybe you can help. P.S. Sorry for my bad English :)

  Hi Mark,

  I suggest you to ask your question in the TechNet Forums, where we are the support technicians who are well equipped with the knowledge on networks.

  You can check this link to post this request.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.